Database Develop

Bricked after downgrading to stock ICS

I was messing around with different ROMs because the customised JB ROM provided by Omar-Avelar wasn't working quite right (I flashed it over O2.de instead of whatever EU thing it was meant to be flashed over) and now my device is bricked.
I get a message saying "Service required. Code corrupt."
I've tried using RSD lite (device doesn't show up) and xFSTK (similar results), but I'm not having any luck. Since the bootloader was unlocked, my warranty is void and I'd like to be able to fix this without having to send it in for repair. Anyone have any suggestions?

Update: Using stuff from this thread: http://forum.xda-developers.com/showthread.php?t=2184877 and using a factory cable that I made, I managed to get it into a state where it shows up in RSD lite. Still, nothing is displayed on the phone's screen. How do I use RSD lite?

I got it to show up in RSD lite but it still didn't help. Download only the very LATEST RSD lite and it should show up. But fastboot/boot is corrupted in my case so it still won't allow you to fix it. Try if you like.

Yep, that's the problem I'm having too. Once I found something I could actually flash with RSD lite, it said it wouldn't enter fastboot mode. What use is RSD lite, then? The only tool that seems to do anything now is xFSTK, but I think I don't have the right type of image for use with it. I'll probably just take the phone in to a service centre.

SleepersTide said:
Yep, that's the problem I'm having too. Once I found something I could actually flash with RSD lite, it said it wouldn't enter fastboot mode. What use is RSD lite, then? The only tool that seems to do anything now is xFSTK, but I think I don't have the right type of image for use with it. I'll probably just take the phone in to a service centre.
Click to expand...
Click to collapse
Yes, I couldn't agree more, for now, I think RSD is not so great in bad situations. This is my first Moto, all my other phones had like 10 methods for unbricking, soft and totally dead bricks, everything. Here, if you don't have fastboot working, it seems you're fked.

[Q] razr i problems - fastboot menu

Hi guys, I am having an issue i cant seem to resolve on my razr i. apologies if this has already been covered in another thread (or 10, which is usually the way with these things because nobody reads the other threads) I have been through a load of other threads but cannot seem to resolve my issue so i started my own.
Right, I have switched from iphone to razr and am not stupid when it comes to jailbreaking etc so thought rooting the razr wouldnt be a problem. when trying to root it it failed and i am stuck at the fastboot menu, however, everything on the menu is disabled so i cant use it. i get the usual message:
fastboot reason: flash failure
fastboot max download size: 100mb
usb connected
if i try to use anything on the menu i get the following message:
fastboot menu disabled.
my phone is not unlocked and not rooted. i have barely done anything to it other than install a couple of free apps. i am unable to progress past this screen. the phone is GB and is on 4.0.4
any help you guys can give would be greatly appreciated. again, apologies if this has already been covered, none of the solutions i found were able to resolve my issue. as i said, i had no problems jailbreaking my old iphone, i am a bit of a n00b when it comes to droids...

AW: [Q] razr i problems - fastboot menu
Are you able to run fastboot commands ? Cause in that case you might be able To unlock bootloader and reflash the software .
Sent from my XT890 using xda premium

xX_Alex_Xx said:
Are you able to run fastboot commands ? Cause in that case you might be able To unlock bootloader and reflash the software .
Sent from my XT890 using xda premium
Click to expand...
Click to collapse
I am not able to do anything. if i scroll to any of the options on the menu as soon as i hit the volume up key it just returns a message advising the fastboot menu is disabled.
**edit
ah commands not menu options. not sure how i go about doing that. i am 100% new to droid...

ged flanders said:
Hi guys, I am having an issue i cant seem to resolve on my razr i. apologies if this has already been covered in another thread (or 10, which is usually the way with these things because nobody reads the other threads) I have been through a load of other threads but cannot seem to resolve my issue so i started my own.
Right, I have switched from iphone to razr and am not stupid when it comes to jailbreaking etc so thought rooting the razr wouldnt be a problem. when trying to root it it failed and i am stuck at the fastboot menu, however, everything on the menu is disabled so i cant use it. i get the usual message:
fastboot reason: flash failure
fastboot max download size: 100mb
usb connected
if i try to use anything on the menu i get the following message:
fastboot menu disabled.
my phone is not unlocked and not rooted. i have barely done anything to it other than install a couple of free apps. i am unable to progress past this screen. the phone is GB and is on 4.0.4
any help you guys can give would be greatly appreciated. again, apologies if this has already been covered, none of the solutions i found were able to resolve my issue. as i said, i had no problems jailbreaking my old iphone, i am a bit of a n00b when it comes to droids...
Click to expand...
Click to collapse
Had the same problem, I used the recommendation in this thread, 5th post and it worked, but afterwards need to re-download apps from PlayStore:
http://forum.xda-developers.com/showthread.php?p=36612151
Follow the instructions exactly - you need the drivers and RSD lite on Windows PC, then connect the phone via usb cable that came with it; and you'll need a full unzip program (cost) so you can move the unzipped files into RSD lite. Get the right flash file though - there's a list in the linked post if you don't want GB retail which I used. Important: this only works for ICS 4.0.4 and don't try to downgrade to an earlier version than what's currently on your phone e.g. v.39 to v.31, for example.
Good luck.

AW: [Q] razr i problems - fastboot menu
If the solution from mervluk does not work (It didn't work for me either) , you should try if you are able to use the fast boot commands .
To do that simply connect your phone to the PC. Then download fast boot , if you do not already have that. It is in the .zip from the RAZR I root thread.
The go to the downloaded folder. There hold shift and perform a right mouse click. Then choose" start a command prompt here "or something similar (don't know how the option is called in English).
Then type in
fastboot reboot
When the phone reboots you might be able to unlock your phone and flash the software.
BUT BE AWARE! YOU WILL LOSE YOUR WARRANTY!!
So you better try the other solution first. This should be your last option.
If you don't know how to unlock the bootloader look in the RAZR I forum or pn me .
Alex
Sent from my XT890 using xda premium

mervluk said:
Had the same problem, I used the recommendation in this thread, 5th post and it worked, but afterwards need to re-download apps from PlayStore:
http://forum.xda-developers.com/showthread.php?p=36612151
Follow the instructions exactly - you need the drivers and RSD lite on Windows PC, then connect the phone via usb cable that came with it; and you'll need a full unzip program (cost) so you can move the unzipped files into RSD lite. Get the right flash file though - there's a list in the linked post if you don't want GB retail which I used. Important: this only works for ICS 4.0.4 and don't try to downgrade to an earlier version than what's currently on your phone e.g. v.39 to v.31, for example.
Good luck.
Click to expand...
Click to collapse
thanks buddy. i will give this a whirl and let you know how i get on. fingers crossed!

mervluk - your advice worked a treat. i got it working again. thanks !
now i am working again, what cool tricks do people advise. is it worth rooting it ? what can i do once it is rooted? am i able to network unlock it myself ?

ged flanders said:
mervluk - your advice worked a treat. i got it working again. thanks !
now i am working again, what cool tricks do people advise. is it worth rooting it ? what can i do once it is rooted? am i able to network unlock it myself ?
Click to expand...
Click to collapse
Glad about that. This phone can be a bit of a so-and-so. ics is being updated ota to Jelly Bean 4.1.2, which I've avoided so far to keep fm (although not activated on the supplied software). I did succeed with unlocking the bootloader (loose warranty - important) following the whole complicated procedure on Moto's website - but couldn't myself use the shortcuts on here. (Then had to set up again and re-download everything from the PlayStore). It required the Moto-supplied key. I then rooted, though I think the JB ota download unroots again? You can't use RSD lite with JB.
With JB the procedures are different, and a modified JB European (not for use with GB) firmware is now available on another thread which is impressing some posters. But I think just be a bit cautious as there does not appear to be any fix for the "service code corrupt" bootloader error yet. Looks like the options are very restricted whilst no-one understand the interaction between Google Android and the intel atom chipset.
I have a network unlock key from one of the commercial suppliers (cellunlocker.net), but haven't needed to try and use it yet!

Your has device has failed verification

Hi still a newbie so please bare with me.
Have tried s hard reset no joy because it's saying that my P9 your device has failed verification and may not work properly.
This was after updating to 7.0 which worked for about 10 mins then this happened
Any help much appreciated thanks

Dc phonix is good software for all the problems

1. Are you or have you ever been rooted? if yes then see question 2. If no then you have bricked your phone somehow, need to restore using one of the methods described in the various threads in the forum. Download official image, use dload method etc.
2. Does the phone boot to Android? If yes then that message is normal. If no then see question 3
3. You need to restore the original boot image and relock your bootloader. If you don't know how to do either or what any of that means then refer to the alternative answer in question 1 and then stop messing with your phone until you learn how to do literally everything with it using the forum.
I realise that sounds harsh, but it's the truth. Too many people bricking perfectly good phones because they don't care to read or learn before they act.

My suggestion would be to rollback and flash b136 on MM then update.. but ensure u are on C432
Enviado desde mi EVA-L09 mediante Tapatalk

Need help fixing phone

Good day. I have the Huawei P9 EVA-L09 model and my build number is C432B386.
I tried rooting my phone a couple of months ago and failed, so I gave up. Yesterday I tried flashing TWRP, it said it was successful, but while trying to enter it, I always get the "Your device can't be trusted... Your device is booting now." I completely gave up on rooting or flashing another ROM so I went to relock my bootloader. It was successful, but while the factory reset part, I got an error in eRecovery (Package download failed or something like that) and after that I restarted my phone and it was factory reseted. My problem is, eRecovery now says that my partition is heavily damaged and needs a wipe. So I tried doing that and it failed again. Now I'm left with a Huawei P9 that doesn't have any stock apps and I can't activate bluetooth (and who knows what else doesn't work but I haven't discovered yet)
If anyone could help, I would be grateful. I don't even know where to start fixing this. I just want my phone back or the MagicRainbow v3 ROM, but I'm not skilled enough to fix this alone.

I am just a beginner, too, so maybe you should wait for more experienced answers...
I would try to find the original images and flash them via fastboot. As far as I understand it, this would fix the corrupted partition.
But again, I still have little knowledge and an almost bricked phone!

McSvenster said:
I am just a beginner, too, so maybe you should wait for more experienced answers...
I would try to find the original images and flash them via fastboot. As far as I understand it, this would fix the corrupted partition.
But again, I still have little knowledge and an almost bricked phone!
Click to expand...
Click to collapse
The partition is fixed, thank you. But I still have a lot of problems. My bluetooth won't work and I no longer have any stock apps. I don't know what to do...

Could you tell we, which ROM you have installed? Is it the stock-ROM, or MagicRainbow? If it is a custom ROM you might need a gapps-package like in LineageOS...
If you want to get back to stock, you can create a dload folder in your sdcard and put the update app in it. Than a restart with a special key combination (power, vol down and vol up I believe) will install it.
I'd strongly advice you to read in this forum how to do this, as you need the right recovery corresponding to your ROM, as far as I understood.
I did this with a wrong ROM and now have a phone with no keyboard, only google voice recognition... So be careful!

I would download and install by DLOAD folder the downgrade package... Then flash a full firmware b136 or 182
But you have to be on cust c432 as far as I know.
There are a lot of info regarding dowgarde to MM. Look for it and take your time to be sure the steps to follow
Enviado desde mi EVA-L09 mediante Tapatalk

How to unbrick Red Magic 3

This is the link to the developers unbricking tool
https://forum.xda-developers.com/red-magic-3/how-to/tool-nubia-red-magic-3-unbirck-tool-t3965044
Sorry technical issues copying link lol.

They told you a hundred times, and you couldn't follow simple instructions.
Enjoy your grease, Einstein.

Sir i have the same thing. Im using rm3 when i bought this its already flash on global rom. So im curious because its box is Chinese text but it's global rom so i flash to china rom and its success but suddenly i figure it out that chinarom doesn't have google so i flash again to global rom then suddenly it corrupt after the flash. I tried those method like that unbrick tool non.eu i follow the steps very well but when it comes to the part that cmd will pop 'downloading port 4'
It says that faile and un identified and it says that please check your status or what. I'm humble asking for your help because this is my only phone and i need this for my online school

johnbrinan1 said:
Sir i have the same thing. Im using rm3 when i bought this its already flash on global rom. So im curious because its box is Chinese text but it's global rom so i flash to china rom and its success but suddenly i figure it out that chinarom doesn't have google so i flash again to global rom then suddenly it corrupt after the flash. I tried those method like that unbrick tool non.eu i follow the steps very well but when it comes to the part that cmd will pop 'downloading port 4'
It says that faile and un identified and it says that please check your status or what. I'm humble asking for your help because this is my only phone and i need this for my online school
Click to expand...
Click to collapse
Look buddy I'm sorry this happened to you. Part of the reason I gave this cell away when I unbricked it was that the very first te it bricked it was bricked 120 days. Is all I can suggest is that you try not to panic an possibly delete system. It's similar to format data. Then try an make a clean start with the unbricking tool. My ex still uses it every day with zero probs an I think it may be an EU rom. These cells are natouriously difficult to customise. I hope you unbrick it soon. An I am sorry there are so many unsympathetic people on XDA who would rather say how ignorant or dumb you are than try an help. I refuse to be like that now. I am just a humble forklift driver. We cannot all be computer experts or write code or roms for cellphones.
Take your time an try an erase the cell in case something you are trying to hold onto is preventing unbricking?
I lost everything on my cell an only had it 2 days when it happened to me. You may lose your data. But erasing might help the unbrick tool work
Good luck. An breathe ok

Bryceicle1971 said:
Look buddy I'm sorry this happened to you. Part of the reason I gave this cell away when I unbricked it was that the very first te it bricked it was bricked 120 days. Is all I can suggest is that you try not to panic an possibly delete system. It's similar to format data. Then try an make a clean start with the unbricking tool. My ex still uses it every day with zero probs an I think it may be an EU rom. These cells are natouriously difficult to customise. I hope you unbrick it soon. An I am sorry there are so many unsympathetic people on XDA who would rather say how ignorant or dumb you are than try an help. I refuse to be like that now. I am just a humble forklift driver. We cannot all be computer experts or write code or roms for cellphones.
Take your time an try an erase the cell in case something you are trying to hold onto is preventing unbricking?
I lost everything on my cell an only had it 2 days when it happened to me. You may lose your data. But erasing might help the unbrick tool work
Good luck. An breathe ok
Click to expand...
Click to collapse
Bhai mera bhi crupt ho gaya same problem bro

nice

اين ملف التحميل