Hi.
Had my Note, a rom and kernel Philz, however i would install the new speed mod kernel, and there was a problem, he start on the samsung logo and when I try to start the cellphone, he hangs on the inicial samsung logo appears and then type pinstripe and goes down. it seems that the screen broke. if i try to enter the cwm or download mode also looks like this. what happened? a mistake?
a screen logo brick ?
sorry about my english . concluding : i try to start my phone, appears the samsung logo and then a "screen broken" and goes down.
Try wiping cache and dalvik
Sent from my GT-N7000 using Tapatalk 2
M_FCPORTO said:
Hi.
Had my Note, a rom and kernel Philz, however i would install the new speed mod kernel, and there was a problem, he start on the samsung logo and when I try to start the cellphone, he hangs on the inicial samsung logo appears and then type pinstripe and goes down. it seems that the screen broke. if i try to enter the cwm or download mode also looks like this. what happened? a mistake?
a screen logo brick ?
sorry about my english . concluding : i try to start my phone, appears the samsung logo and then a "screen broken" and goes down.
Click to expand...
Click to collapse
I am not sure what the problem is, but it seems you flashed an incomplete or incompatible kernel
Try to flash Philz kernel again using Odin, I suppose you can't log onto recovery
if you can't log onto recovery or download modes, I suppose you have a brick issue
refer to samsung repair center
Related
Help i was playing fruit ninja on my ace with cm 7.2 by vo-1..... after some time my phone became very hot so i turned if off for a while then switched it back on then this what happens it loops on samsung logo ...i cant boot into CWM recovery but luckily i could go into download mode and i tried to flash stock rom through odin but unfortunately after completion when it tries to boot it loops continuosly on samsung logo;-(
ANY HELP?..
Try to flash a mulit-package rom like 2.3.3 KP0.
Farooq95 said:
Help i was playing fruit ninja on my ace with cm 7.2 by vo-1..... after some time my phone became very hot so i turned if off for a while then switched it back on then this what happens it loops on samsung logo ...i cant boot into CWM recovery but luckily i could go into download mode and i tried to flash stock rom through odin but unfortunately after completion when it tries to boot it loops continuosly on samsung logo;-(
ANY HELP?..
Click to expand...
Click to collapse
no need! just do a factory wipe! thats it!
Sent from my GT-S5830 using xda premium
jinavs did you read this:
i cant boot into CWM recovery
Click to expand...
Click to collapse
But Farooq95 have you try to go to the stock recovery after flashing the stock rom?
dragonnn said:
Try to flash a mulit-package rom like 2.3.3 KP0.
Click to expand...
Click to collapse
yes i even tried to go into stock recovery but same thing happens
When you flash the mulit-package and you can't go into recovery then I think you phone is damaged. Only what can you try more is using adb to get into recovery:
Code:
adb reboot recovery
At boot loop you mean the Samsung boot animation - or the logo that displays immediately when you try turn on you phone?
dragonnn said:
Try to flash a mulit-package rom like 2.3.3 KP0.
Click to expand...
Click to collapse
i have flashed stock S5830JPKKP9 wich is my baseband But can u provide me link for 2.3.3 kpo
Is S5830JPKKP9 a mulit-package? When yes than it isn't necessary to flash 2.3.3 KP0, doesn't make any difference. You can found 2.3.3 KP0 here https://hotfile.com/dl/127701476/7d30a8b/S5830XWKPO.rar.html but this is an European rom.
The logo when i immediately turn on da phone
I have bad news to you - I think you phone is damaged. Only what you can do is flash a mulit-package. When this doesn't help you must go to the service center. But try before turn on you phone put out the battery for a few minutes.
EDIT
Have posted wrong link, post edited - now it's ok.
Thanks for your effort ill try that... but wat is multipackage? Can i use adb to get into recovery as u said before?
multipackage is an firmware that is split in more files - flashing it make a eraser of all internal memory (have update my previous post whit correct link). You can try adb, but I think you will get "error - no device" because adb works on when the kernel boots - that means it will help when you have a classic boot loop on the boot animation - not on the SAMSUNG logo.
Are u sure that there is no other way to fix this?
Definitely yes.
Pls say cause im taking this to service centre 2morrow
I think the problem is you have overheat you phone - did you play on it when charging the battery? And second I think it isn't good to turn of you phone when he gets hoot - better to let it on and cools slow down.
I found out what really caused this problem so the day before i installed this app called "mobile odin" it asked me root permissons so i allowed it..then it said that the app is not compable with my device and then it asked me to allow it to create a dump file and it said that it could take almost 30 mins to complete and make that app compatible with my device...so i allowed it after 30min it said finished dumping after that i didnt switch off or reboot the phone that day...but i rebooted the phone the other day when it became hot while playing which caused this problem...i am saying this because some other user bricked his/her phone the same way!
I think I lost my phone now the same why -.- damit
Farooq95 said:
I found out what really caused this problem so the day before i installed this app called "mobile odin" it asked me root permissons so i allowed it..then it said that the app is not compable with my device and then it asked me to allow it to create a dump file and it said that it could take almost 30 mins to complete and make that app compatible with my device...so i allowed it after 30min it said finished dumping after that i didnt switch off or reboot the phone that day...but i rebooted the phone the other day when it became hot while playing which caused this problem...i am saying this because some other user bricked his/her phone the same way!
Click to expand...
Click to collapse
While MobileOdin is not compatible with a Galaxy Ace http://forum.xda-developers.com/showthread.php?t=1347899 I'm not sure how it would have bricked your phone when you didn't actually ask it to do anything.
As others have said, considering the inability to enter recovery after flashing a new bootlader & rom etc, a hardware error appears more likely perhaps as a result of overheating.
Too late it had to replace motherboard....
Sent from my GT-I9100 using xda app-developers app
Hi,
I rooted my note some weeks ago and I was searching the web, reading all kind of threads and thinking what the problem might be for the last weeks. Finally I decided to register myself on xda and to post my problem.
Like mentioned before I rooted my note via CMW and then flashed a franco kernel, unfortunally I dont know which version, but no custom rom. It all worked fine for 14 maybe 16 hours, then the phone froze after opening a app and after that it stuck at the Galaxy Note N7000 logo. I tried to enter recovery but it didn't work, I can enter downloadmode but I ran out of battery before I could do anything.
Now the phone keeps turning itself on and off the whole time when I try to charge it, the battery image comes for like 1 second and after that the screen turns black again. The battery itself is new so that shouldnt be the problem. I charged it like that for like 4 hours and then tried to enter downloadmode but it only says "battery to low to download".
I hope it is not a hardware problem. If anybody has a idea please help me, I am getting desperate.
Greets
weasl
EDIT: I came from offical 4.0.4 ICS
How old is your phone? Try with another good battery.
Suggestion: you may flash gb via PC Odin and check phone back to normal.
Sent from my GT-N7000 using xda premium
I got my phone last april, so it is not even a year old, but I got a new battery some days before rooting it... I'll try/have to get another one anyway.
Could you give me a link for a stock gb rom please.
Thank you for your quick reply.
Kindly go thru Guru 'drketan' threads and posts.
Sent from my GT-N7000 using xda premium
Found it. Should I use a rom with three parts or with only one? And can I use any rom or one with a special "code" that suits my device, e.g. german....
And just flash the rom and then fullwipe or is wiping not necessary?
I am sorry for the questions but I want to do everything right.
You can use any. Wipe in GB recovery.
Thanks a lot.
Yesterday I finally found somebody to charge my battery, today I flashed a GB stock rom, but I still can`t get any further than the Samsung Galaxy Note logo... It worked one time but I turned the phone off to insert my sim card and it got stuck again.
I tried flashing with pit file and bootloader as well, but no luck.
Could it be a hardware problem? Could a J-tag repair fix it?
Thanks in advantage.
weasl said:
Yesterday I finally found somebody to charge my battery, today I flashed a GB stock rom, but I still can`t get any further than the Samsung Galaxy Note logo... It worked one time but I turned the phone off to insert my sim card and it got stuck again.
I tried flashing with pit file and bootloader as well, but no luck.
Could it be a hardware problem? Could a J-tag repair fix it?
Thanks in advantage.
Click to expand...
Click to collapse
Now your on safe GB rom, enter recovery wipe cache, factory reset, wipe dalvick cache.
Let's know the result
I tried, but I am not able to enter recovery... I press volume up + home + power but I only get the N7000 logo. I have read that you have to press the home button in the right moment to enter stock recovery, could somebody tell if that is true and if yes when do I have to press?
Anyone an idea please? I can enter download mode but not recovery, I downgraded to gb 2.3.6.KK5, I flashed abyss 4.2 but I can get to recovery mode or past the GT N7000 logo. Three times it got to the "package installing" page and one time it even started then I switched it off to insert my sim card and again stuck at the N7000 logo.
I need help please...
weasl said:
I tried, but I am not able to enter recovery... I press volume up + home + power but I only get the N7000 logo. I have read that you have to press the home button in the right moment to enter stock recovery, could somebody tell if that is true and if yes when do I have to press?
Click to expand...
Click to collapse
You have to press the three button combo "a long time" and the power button should be the last one to use.
I always wait until the Samsung Logo appeared 2 times and I see the next animation (depends on your kernel/recovery).
So please try again and hold the three buttons longer.
I flashed the 3-part lc1 gb and did a full wipe. The phone now starts sometimes but gets stuck at the n7000 logo most of the time. When it starts the whole UI feels very laggy, eg. while typing. Recovery mode started one time out of 1000 tries. I am afraid that something with my hardware is wrong. Any ideas? Could a Jtag be a solution? Please help.
try again to get into recovery and do a factory reset from Gb recovery..
press it until you get to recovery. DO NOT remove your fingers when you see n7000 bootlogo. keep pressing . keep pressing. keep pressing.
Recognized Distributor™
I made it in the recovery, did another fullwipe, but it still lags while typing or opening/closing an app and still does not boot proper, I have to try several times to get past the logo screen and it works only when I go in downloadmode and boot from there. Entering the recoverymode still only works randomly. Any idea?
Edit: it also lags while scrolling down/up
weasl said:
I made it in the recovery, did another fullwipe, but it still lags while typing or opening/closing an app and still does not boot proper, I have to try several times to get past the logo screen and it works only when I go in downloadmode and boot from there. Entering the recoverymode still only works randomly. Any idea?
Edit: it also lags while scrolling down/up
Click to expand...
Click to collapse
In all you posts here you never wrote exactly what version of which Rom you installed in whatever way.
That's why I'm still not convinced that you have "defined state" and giving good advice is try&error.
So please start telling: how did you flash, what GB or ICS or JB version, Stock Rom or Custom Rom.
,Sorry, I flashed the n7000xxlc1 - open europe with odin PC, stock, prerooted and in 3 parts. After that I did a fullwipe, the phone turns on after a few tries, most time after I go in download mode and restart from there. It lags while it is on, like short freezes, I tried to install the OTA update to ICS but failed.
Before that I was stuck on the Samsung Galaxy Note logo after flashing a franco kernel via CWM (I am not sure which version but it came with the guide to root, so I thought it could not be bad)
Edit: I flashed the xxlsc 4.1.2 jelly bean offical leak via odin PC, and I still have the same problems. I takes 5-6 reboots to actually start the device and it is very laggy, almost unusable. Every second or so it freezes for short time.
Any help please? I would send it to someone to do a JTAG repair if this could help. I just dont want to waste the money, so if anyone has experienced a problem like this please help me.
Is this a brick revived phone?
please help me! Galaxy Ace s5380 stuck on boot logo, i try to use the HOME + Power but i cannot enter to recovery mode, and i also try to flash it through Odin... with S5830DXKPB firmware asian...then the download logo is color yellow?? is that right or it must be color light blue? then also nothing happen still stuck on the boot logo saying galaxy ace... but i noticed that after it was flash the 1st logo appears is galaxy ace.. but when i remove it and reset the phone the first logo is samsung???i also notice that com port mapping has the only box that has color,. i think that on its top the bigger box must have color too when i connect my phone.. and it can only have color when it saids pass!!! PLEASE GIVE ME SOLUTIONS!!! tnx in advance! i can go to download mode that is color yellow logo... but still after i finish flashing via odin nothing happens../[ like i said the red circle means the upper box is loading but not having color... the blue box means it is the box that has only color... PLEASE HELP! see attachments
UP for this thread...
i can still go to download mode.. but when i flash it to odin... when it was finished the phone is stuck up in galaxy ace logo?? what should i do???
booeramis said:
UP for this thread...
i can still go to download mode.. but when i flash it to odin... when it was finished the phone is stuck up in galaxy ace logo?? what should i do???
Click to expand...
Click to collapse
PDA -> CODE* file
EFS -> empty !!!
PHONE - > MODEM* file
You have flashed modem file as EFS.
Try download mode (VOL down + MENU + POWER).
PDA,PHONE,EFS fixed... but still stuck!!!
ive done what youve said... but stuck on galaxy ace boot.... i try to charge my ace then i noticed that its going to overheat... and whenever i try to charge in it boots in galaxy ace boot... then i also noticed that when the 1st time i fixed my ace through this firmware... i get some black screen(absolutely no power on scree but has light on keypad)... does this firmware does not compatible with my phone?? i do have flash it again because i noticed the black screen problem... then i got this stuck on galaxy ace problem!!!
booeramis said:
ive done what youve said... but stuck on galaxy ace boot.... i try to charge my ace then i noticed that its going to overheat... and whenever i try to charge in it boots in galaxy ace boot... then i also noticed that when the 1st time i fixed my ace through this firmware... i get some black screen(absolutely no power on scree but has light on keypad)... does this firmware does not compatible with my phone?? i do have flash it again because i noticed the black screen problem... then i got this stuck on galaxy ace problem!!!
Click to expand...
Click to collapse
try to flash the full package which is XXKPH download it and flash..
cooper = cooper v1
pda = code
phone = modem
boot = appboot
csc = multi csc
leave efs empty..
flash it and i am sure it will be ok..
this is the only step i followed when flashig..appboot will only included on the flashing if and only if the phone is on stuck and bootloop problem..
mizukage said:
try to flash the full package which is XXKPH download it and flash..
cooper = cooper v1
pda = code
phone = modem
boot = appboot
csc = multi csc
leave efs empty..
flash it and i am sure it will be ok..
this is the only step i followed when flashig..appboot will only included on the flashing if and only if the phone is on stuck and bootloop problem..
Click to expand...
Click to collapse
is it ok even i flash the russian firmware XXKPH?? im from the philippines... so you said that i should not put appboot?? do i need or not? im stuck on boot galaxy ace??? im confused???
Use a latest version of Odin...
Go to samfirmware and download a rom which suits you...
Flash it and there should be no Problem
Ace s5830 stuck
~PAIN said:
Use a latest version of Odin...
Go to samfirmware and download a rom which suits you...
Flash it and there should be no Problem
Click to expand...
Click to collapse
Hi, I've downloaded Odin and the appropriate firmware to install. My phone was set to download (Orange/yellow text) but an error appears on pc stating 'an unnamed file was not found.'
Please help and provide guidance for a novice to Android.
Many thanks.
paulscarbs said:
Hi, I've downloaded Odin and the appropriate firmware to install. My phone was set to download (Orange/yellow text) but an error appears on pc stating 'an unnamed file was not found.'
Please help and provide guidance for a novice to Android.
Many thanks.
Click to expand...
Click to collapse
Do post the screenshot so we know more about what we are looking at.
i'm using omnirom 4.4.2 but i want to upgrade to 4.4.4 but everytime i boot to recovery i'm stucked at teamwin logo
Bad luck...
Could you give some more info? Did you do a factory reset? What ROM exactly did you flash? Why don't you just wait that someone answers your question?
Gesendet von meinem GT-N7000 mit Tapatalk
Arals said:
i'm using omnirom 4.4.2 but i want to upgrade to 4.4.4 but everytime i boot to recovery i'm stucked at teamwin logo
Click to expand...
Click to collapse
With it a couple of minutes and see if you get the options.
I'm using omni ROM 4.4 since nov2013. This all started when I flashed the 050514 build. I did not do factory reset because i'm using omnirom before
I waited for a few minutes. Still nothing goes to teamwin logo then black screen then teamwin logo then black screen over and over
Arals said:
I waited for a few minutes. Still nothing goes to teamwin logo then black screen then teamwin logo then black screen over and over
Click to expand...
Click to collapse
Download philz XXLTA tar kernel file and flash using odin, uncheck auto reboot. . Power off and boot into recovery. Then flash raw kernel and flash your ROM again.
nokiamodeln91 said:
Download philz XXLTA tar kernel file and flash using odin, uncheck auto reboot. . Power off and boot into recovery. Then flash raw kernel and flash your ROM again.
Click to expand...
Click to collapse
It worked. Thanks. Just got a orange triangle on Samsung logo
Arals said:
where could i download it?
Click to expand...
Click to collapse
Use the search
Can you explain this process to a noob, please
nokiamodeln91 said:
Download philz XXLTA tar kernel file and flash using odin, uncheck auto reboot. . Power off and boot into recovery. Then flash raw kernel and flash your ROM again.
Click to expand...
Click to collapse
I am more or less a noob so I need very precise instructions if I am to follow your advice.
I have a rooted N7000 running Asylum Omnirom 4.4.2. (Omni version 4.4.2-20140318-Asylum-N7000, Baseband N7000XXLT3 Kernel version 3.0.64-666-g5984047 [email protected] #1 Tue Mar 18 05:29:00 CET 2014 Asylum Omni Build omni_n7000-userdebug 4.4.2 KVT49L Eng.chasmodo.20140318.045429 test-keys)
I have TWRP on it (unsure of the version - all the software I used to root my phone is on my external harddrive at home.). This morning it was working fine but then rebooted unexpectedly. When it powered back on, it got stuck at the Samsung screen, so I rebooted but it was still stuck so I pulled the battery to reboot. No good, still in bootloop. So went into recovery mode and did factory reset/wipe data. It started but saw no progress whatsoever (i.e. no blue colour overtaking the grey along the spinning bar showing it was progressing along). I had to do some other things so left it plugged into the wall charger (battery was at about 78% when it rebooted but I did have both bluetooth and wifi running so that could really drain it). When I returned about 40 minutes later it was back at the Samsung screen. Now if I try to go into recovery, I get the TEAMWIN splash screen but it never goes beyond that. Tried pulling the battery, sim card, SD card, and various combinations. Tried a different battery, tried all sorts of variations I found searching but none have gotten me either past the Samsung screen if I try to boot up normally, or past the TEAMWIN screen if I try to boot into recovery.
I found this thread from last year and I am hoping this will work for my situation. However, I have never used ODIN (it seems to be there if I do the Volume down-power-home combination) so I want to make sure I understand this precisely. When you say flash the raw kernel, what precisely are you referring to? When I originally rooted my phone I just followed a YouTube video and don't recall having a "raw kernel". So I need some guidance as to what you mean by this, please.
Thanks
jah732
jah732 said:
I found this thread from last year and I am hoping this will work for my situation. However, I have never used ODIN (it seems to be there if I do the Volume down-power-home combination) so I want to make sure I understand this precisely. When you say flash the raw kernel, what precisely are you referring to? When I originally rooted my phone I just followed a YouTube video and don't recall having a "raw kernel". So I need some guidance as to what you mean by this, please.
Thanks
jah732
Click to expand...
Click to collapse
Search for Philz thread for N7000.. go to the 3rd post where it says TW kernels and download the xxtla kernel.. download odin 1.85 from google. Make sure you have Samsung usb drivers installed.. If not, google that too and download from Samsung developer site. Install it.. Make sure you have no kies processes running in the task manager.
Boot the phone in download mode and connect to PC. open odin as admin. (watch Youtube video for how to flash using odin)
Select the kernel file in PDA and uncheck the autoreboot option..
flash.. Once you get a green pass or res ok.. remove the cable and remove the battery.
Boot into recovery by pressing the vol up+home+home (obviously put the battery back in)
You should get Philz recovery.. Check and proceed from there.
Hello
I have a mini S3 and went to install CyanogenMod on it but the ODIN stopped in the middle of the installation, causing the Android stay corrupted and whenever I called this message appeared: "firmware upgrade encountered an issue. Please select recovery mode in kies and try again "
So I downloaded the original S3 mini according to my country and everything and I install ROM, well, the installation took place correctly but leave it stuck in boot start screen showing the phone model, then I install the ROM again but the ODIN stopped again and there came the problem ...
it does not turn on the power switch and the only way to 'make it light up the screen' is connecting the USB, but when I plug the cable it gets on and off the screen repeatedly at the "firmware upgrade encountered an issue. Please select recovery mode in kies and try again " until I remove the cable and the phone turns off completely.
I hope you guys understand my problem and can help me please.
Already grateful : )! (sorry my english)
Try another computer or another cable. If it is stuck at boot screen, do a wipe/factory reset in recovery menu
Can't power on and enter on recovery menu
JanniekM00 said:
Try another computer or another cable. If it is stuck at boot screen, do a wipe/factory reset in recovery menu
Click to expand...
Click to collapse
I can't do wipe/factory reset in the recovery menu because i can't power on at all. It keeps only blinks (on and off) all the time when its plugged on PC or charger.
Thanks very much for your support!
Did you see the s3 mini logo if you turn on the phone. If you see this works download mode then? if not then your phone is bricked....
When you try and turn the phone on does it display the phone name? Or does nothing happen? If you get nothing then I'm afraid it's bricked. I'd try a different computer, different lead and possibly a different windows os. Then try and flash a stock rom using odin and be 100% sure it's for the model of the phone you have as there's loads of variants of the s3. Other than that, I can't help you any further
Hi everyone,
At first sorry for my english. I`m Dawid from Poland
OK, so i have gt-i8190N and when i trying to turn it on i see only white screen. Screen is ok because i can run phone in download mode.
Of course everyone says " so try to flash rom by odin" but i can`t because in odin i have error "FAIL Get PIT for mapping There is no PIT partition". I was try to flash rom with PIT file (to i8190N and i8190) but without succes.
Are anyone have the same problem?
I was try OneClick also.
Thanks for any answer.