Database Develop

HELP!!!! Stuck on Boot Screen!!!!

HELP!!!
Im stuck on boot logo and I cannot flash anything on PC Odin. And I cannot access Recovery Mode (Neither CWM or system recovery). I can only go into Download Mode.
I was on CheckRom NoteHD and I used the kitchen app to download franco kernel and one of the mods (Use camera flash below 15% to be precise) and as soon as I installed, it didn't let me boot back into Checkrom!!! And Now im stuck on boot logo no matter how hard I try. I did try flashing the wipe ROM (Pre-rooted Open Europe 2.3.6 LC1), I also tried flashing the CF-Root file but still no luck. PC Odin says failed in between the process!!
Please Help me guys.. I don't know what really went wrong as I have installed stuff from the KitchenPro App before.
What can I do now?
Thanks

roni2915 said:
HELP!!!
Im stuck on boot logo and I cannot flash anything on PC Odin. And I cannot access Recovery Mode (Neither CWM or system recovery). I can only go into Download Mode.
I was on CheckRom NoteHD and I used the kitchen app to download franco kernel and one of the mods (Use camera flash below 15% to be precise) and as soon as I installed, it didn't let me boot back into Checkrom!!! And Now im stuck on boot logo no matter how hard I try. I did try flashing the wipe ROM (Pre-rooted Open Europe 2.3.6 LC1), I also tried flashing the CF-Root file but still no luck. PC Odin says failed in between the process!!
Please Help me guys.. I don't know what really went wrong as I have installed stuff from the KitchenPro App before.
What can I do now?
Thanks
Click to expand...
Click to collapse
First this:Turn off the device and pull the battery, wait for 30 seconds and try to get in recovery mode, if that works reflash CheckRom. If that doesn`t work pull the battery again and get in downloadmode and connect to the pc and see if Odin recognizes the phone. If it does flash any stock rom.

gee2012 said:
First this:Turn off the device and pull the battery, wait for 30 seconds and try to get in recovery mode, if that works reflash CheckRom. If that doesn`t work pull the battery again and get in downloadmode and connect to the pc and see if Odin recognizes the phone. If it does flash any stock rom.
Click to expand...
Click to collapse
I tried the exact same thing you mentioned and no, it doesn't go into recovery mode. and yes, it does go into download mode but it fails to flash. I tried 2-3 different firmware versions of 2.3.6, 4.0.3 and I'm pretty sure the downloaded files aren't corrupt!! I don't know what to do...
The only thing working is getting to download mode but then thats no point since I can't flash any ROM.

roni2915 said:
I tried the exact same thing you mentioned and no, it doesn't go into recovery mode. and yes, it does go into download mode but it fails to flash. I tried 2-3 different firmware versions of 2.3.6, 4.0.3 and I'm pretty sure the downloaded files aren't corrupt!! I don't know what to do...
The only thing working is getting to download mode but then thats no point since I can't flash any ROM.
Click to expand...
Click to collapse
There are threads about reviving recovery i think on xda, haven`t needed them so far but look around and you will find them. If you can`t restore recovery or downloadmode then it`s off to the shop i guess
Does Odin recognize your phone, what exactly goes wrong when flashing with Odin?

roni2915 said:
I tried the exact same thing you mentioned and no, it doesn't go into recovery mode. and yes, it does go into download mode but it fails to flash. I tried 2-3 different firmware versions of 2.3.6, 4.0.3 and I'm pretty sure the downloaded files aren't corrupt!! I don't know what to do...
The only thing working is getting to download mode but then thats no point since I can't flash any ROM.
Click to expand...
Click to collapse
i have the same situation like you before ...try this ..http://forum.xda-developers.com/showthread.php?t=1667886 i works for me..hope it works for you too...

"Battery Too Low, Can't Download"
Now there's another problem.
Not only I Can't flash anything, I can't even get to Download Mode because the battery is low.
When I press the Vol Down + Power + Home key, I get "Low Battery, Can't Download" in red font.
I left my phone on charge through the AC port and I had no idea it wouldn't charge. The only thing was that my phone was exteremly hot but still with zero battery. I even tried plugging the phone through the USB cable but still no luck.
I removed battery for few minutes upto 30 mins and put it back in and plugged in the charger but all I see is the empty battery symbol keeps flashing every 5 seconds.
Is there any way I can charge my battery and get back to download mode so I could try flashing the stock kernel to get past the boot screen? I even tried plugging in the USB jig that I used with my SGSII previously, but it was of no use as well.
Please Help!!!

your only option is to use a universal charger external, or borrow another note to put your battery in.
once your battery is full you can carry on the previous steps
good luck

ac-milan said:
your only option is to use a universal charger external, or borrow another note to put your battery in.
once your battery is full you can carry on the previous steps
good luck
Click to expand...
Click to collapse
i will probably take it to best buy because i dunt know anyone that owns a note.. only I'm the cool one
hopefully i can charge my battery at best buy and then go on with the process!!

Hey,
I managed to buy an external charger and I was able to go to Download Mode again.
After that I tried to flash stock kernel (stockKernelXXLA4.tar) And Odin said "Pass".
After that I was stuck on the Samsung Galaxy Note GT-N7000 Logo again.
I'm not sure what to do now!!
Please help.
Is there anything else that I could flash?
Even though I flashed a stock kernel, I still see a yellow exclamation mark..
PLEASE HELP, I NEED MY NOTE TO COME BACK TO LIFE!

Sorted this mess out!!!
I flashed "N7000JPLPD_N7000OJPLP7_N7000XXLPT_HOME.tar" And the phone now works!!!
Stock kernels didn't do the work for me, but the official ICS release did.
Thanks to all that contributed in the thread.

is the new release can do ?
i'm using the LPT / LQ2, and the flashing process very long like stuck in firmware upgrade process. The bar just like never move for half our alrd.
how long you take for yours ?

antique_sonic said:
is the new release can do ?
i'm using the LPT / LQ2, and the flashing process very long like stuck in firmware upgrade process. The bar just like never move for half our alrd.
how long you take for yours ?
Click to expand...
Click to collapse
it only took me 5-8 minutes...

[Recovery]【T210R & T210】 Unofficial CWM Adv. Edition PhilZ Touch

This is an old unofficial version. Please go to THIS thread for the updated, official version.
All information below this line pertains to the old, unofficial version. Use the link above to get the official version.
Updated (v2) Slow recovery bootup fixed.
This is an unofficial version of CWM Advanced/PhilZ Touch recovery. Main thread located HERE. Go to the main thread to learn about all the features.
It uses the zImage and ramdisk provided by @ketut.kumajaya with a few tweaks to get it working made by myself.
Please take a moment to say thanks and/or donate to @ketut.kumajaya for helping us out.
It takes a few seconds longer for CWM based recoveries to boot than the stock recovery, so be patient.
Credits go to:
@Phil3759 for the advanced features
@ketut.kumajaya for the working zImage
and of course Koush and the CyanogenMod team
Link to kernel source https://github.com/kumajaya/android_kernel_samsung_lt02
~~~~~~~~~~~~~~~~~~~~~~~~~~~
If the on-screen menu doesn't show, hit one of the up/down buttons at the bottom to get it to appear. This is the same issue seen with CWM recovery and is caused by booting into recovery with the key combo. I highly recommend using the Quick Boot app or another software method of booting recovery.
~~~~~~~~~~~~~~~~~~~~~~~~~~~
Instructions:
1. Download ODIN on your computer.
2. Power off the device.
3. Restart in "Download Mode" by holding the "HOME" button, "Volume Down" and "Power" all at the same time (for about 5 seconds).
4. Hit the "Volume Up" to enter download mode.
5. Start the ODIN exe program. Un-check Auto Reboot. See notes about ODIN below.
6. Connect the device via USB to your computer. Verify the device shows as "Added" in the Message box. If it doesn't show then you need the Samsung USB drivers (just install KIES to get them).
7. Select "PDA" then choose the recovery file you want to flash.
8. Hit "START". Wait for Odin to finish (~10-15 seconds). The message area will display "RES OK" when finished.
9. Wait for device to restart. Skip this step if you unchecked auto reboot.
10. Restart directly to recovery mode before rebooting into OS.(Hold POWER, Volume UP, and the HOME button all at the same time. When you see the Samsung Logo, let go of the POWER button, but keep holding the Volume UP and HOME until you see the recovery screen).
11. To get the Internal SDcard to be recognized properly, choose the Advanced option; then touch the "Storage set to" option. It should change from "/data/media/0" to "data/media/". Then reboot recovery using the "Power Options".
I also recommend adjusting the Menu Height to a smaller value using the PhilZ settings option.
Notes about ODIN
--Make sure that "Re-Partition" is NOT checked.
--Auto Reboot can be un-checked if the recovery doesn't flash correctly on your device. Some have reported that un-checking Auto Reboot fixes this issue. If you un-check Auto Reboot, you will need to reboot the device yourself (refer back to step 10).
Instructions for recovery flashable version:
Boot into your previously installed custom recovery.
Select the Install Zip option.
Find the recovery zip.
Flash.
Reboot recovery.
Enjoy your new recovery.

Main Menu

Downloaded and installed. What i found so far is that it reacts little slow and the time in the status bar is gone in lockscreen.... After unlocking clock comes back in status bar.
Cant change GUI height correctly, all the time i touch GUI it increases the value only...

batman08 said:
Downloaded and installed. What i found so far is that it reacts little slow and the time in the status bar is gone in lockscreen.... After unlocking clock comes back in status bar.
Click to expand...
Click to collapse
I'm not sure what you mean about the time. It is not supposed to be in the status bar on the lock screen, and that has nothing to do with this recovery.
Sent from my DROID RAZR MAXX HD

gr8nole said:
I'm not sure what you mean about the time. It is not supposed to be in the status bar on the lock screen, and that has nothing to do with this recovery.
Sent from my DROID RAZR MAXX HD
Click to expand...
Click to collapse
Ok, haven't paid much attention to that to be frank.

batman08 said:
Downloaded and installed. What i found so far is that it reacts little slow and the time in the status bar is gone in lockscreen.... After unlocking clock comes back in status bar.
Cant change GUI height correctly, all the time i touch GUI it increases the value only...
Click to expand...
Click to collapse
In regards to it reacting slowly, since you complained about that with TWRP also, I believe that is a problem with your tablet. I can't imagine it working any faster on mine. Every selection is immediate.
Keep increasing the gui height until it goes to a lower value (around 100 it switches).
Sent from my DROID RAZR MAXX HD

gr8nole said:
In regards to it reacting slowly, since you complained about that with TWRP also, I believe that if a problem with your tablet. I can't imagine it working any faster on mine. Every selection is immediate.
Sent from my DROID RAZR MAXX HD
Click to expand...
Click to collapse
Some other users also experienced slow reaction with latest TWRP. I used TWRP 2.5.0.0 and speed and reaction was ok, on 2.6.xx reaction is slow...

Awesome job. Like how this is all coming together slowly for this tablet...

gr8nole said:
This is an unofficial version of CWM Advanced/PhilZ Touch recovery. Main thread located HERE. Go to the main thread to learn about all the features.
Since your in the recovery mood you should check out shabbyPenguins recovery OUDHS I think
Click to expand...
Click to collapse

my phone is samsung GT-I8268 Marvell PXA988 kernel
please Compile CWM Recovery for I8268
 @ketut.kumajaya

Can we have cwm flashable zip please.
Regards.
Sent from my GT-N7100 using xda premium

nitol said:
Can we have cwm flashable zip please.
Regards.
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
Done. Flashable zip in OP.

After flashing one of the custom ROM's, I still get Android System recovery in Recovery mode. Tried 3 different ones, not working... Anyone? In Download mode it however says Custom...
/edit: turning off auto-reboot fixed it!

OP updated with v2. Slow recovery bootup fixed.

Ive tried this with auto reboot checked and unchecked.. and im still getting android recovery. I have Kies installed.. do i need to install drivers on my pc?? I waited several minutes but all i get is leave cs...

freak69ize said:
Ive tried this with auto reboot checked and unchecked.. and im still getting android recovery. I have Kies installed.. do i need to install drivers on my pc?? I waited several minutes but all i get is leave cs...
View attachment 2418355
Click to expand...
Click to collapse
Hit START

Ohhh.. DUHHH... hahaha i should have know that seeing thats how i rooted my S3. So i take it i have root also now right?? Or do i have to flash something else?

freak69ize said:
Ohhh.. DUHHH... hahaha i should have know that seeing thats how i rooted my S3. So i take it i have root also now right?? Or do i have to flash something else?
Click to expand...
Click to collapse
Flash the root.zip from the cwm or twrp thread.
Sent from my DROID RAZR MAXX HD

Hi, i have a t217A tab 3 7.0 and it has a msm8960 cpu not the msm8930 you mentioed earlier, which shows up under cpuz as a Krait 1.73 gighz
when i boot to recovery it says encrypted and the flash fails. im guessing i need a diffrent version. is there a current build for the touch screen recovery for this version already made and in place ? if so could someone link me ?
and i had a q , you mention that this should be flashed via already flashed recovery , is this mandatory or can i flash the touch version via odin straight away ? do i need to flash the regular non touch recovery then flash the touch or can i get away with directly flashing the touch recovery without first flashing the non touch?
I have rooted already , the method on this forum worked for the t217A
thanks

spydergt said:
Hi, i have a t217A tab 3 7.0 and it has a msm8960 cpu not the msm8930 you mentioed earlier, which shows up under cpuz as a Krait 1.73 gighz
when i boot to recovery it says encrypted and the flash fails. im guessing i need a diffrent version. is there a current build for the touch screen recovery for this version already made and in place ? if so could someone link me ?
and i had a q , you mention that this should be flashed via already flashed recovery , is this mandatory or can i flash the touch version via odin straight away ? do i need to flash the regular non touch recovery then flash the touch or can i get away with directly flashing the touch recovery without first flashing the non touch?
I have rooted already , the method on this forum worked for the t217A
thanks
Click to expand...
Click to collapse
No , it has msm8930 it will still show as 8960 it's a qcom thing. Also this isn't for your device.

[Q] Issue on GT-N7000

Hi Team XDA,
I am facing issues with my GT-N7000
1. I was running on Slim saber 4.4.4 with TWRP
2. I flashed CWM 6.0.4.5 in TWRP and after restart my phone went in to Bootloop.
3. Then I restarted my phone on Download mode and flashed Stock Rom 4.1.2 from Sam Mobile on my GT-N7000 using Odin
4. It Stuck on Samsung logo again
5. I was trying to boot recovery mode but it was not booting (to wipe Data/Cache/Dalvik Cache)
6. I am able to start phone in Download Mode only and not Recovery mode. (using Hardware Keys)
Can anyone help me out coming out of this. I still believe if i can wipe my data/Dalvik/System Cache using ODIN my phone will start.

NikhilDj26 said:
Hi Team XDA,
I am facing issues with my GT-N7000
Can anyone help me out coming out of this. I still believe if i can wipe my data/Dalvik/System Cache using ODIN my phone will start.
Click to expand...
Click to collapse
kinda strange issue,
usually if you've already flashed the original Samsung firmware, it will come together with "built-in" recovery which "possible" to be access in any circumstances,
hmmm, try to do odin again, with different frimware version from different country (I also didn't use my own country firmware) :silly:
by default, try to disable "auto-reboot" option on the odin,
once you've complete flashed the firmware, try to remove the battery for moment, and boot into recovery,
should be working
give it a try, I used to do it in my S Plus, :silly:

kazuna69 said:
kinda strange issue,
usually if you've already flashed the original Samsung firmware, it will come together with "built-in" recovery which "possible" to be access in any circumstances,
hmmm, try to do odin again, with different frimware version from different country (I also didn't use my own country firmware) :silly:
by default, try to disable "auto-reboot" option on the odin,
once you've complete flashed the firmware, try to remove the battery for moment, and boot into recovery,
should be working
give it a try, I used to do it in my S Plus, :silly:
Click to expand...
Click to collapse
Nope. Its not booting in Recovery mode. I tried installing firmware from different countries.. but same case.
Even with CWM it is not booting in recovery.

NikhilDj26 said:
Nope. Its not booting in Recovery mode. I tried installing firmware from different countries.. but same case.
Even with CWM it is not booting in recovery.
Click to expand...
Click to collapse
hmm, strange, however I did do some research for this kind of issues,
and most of my finding stated it might to do with hardware issues (case where unable to boot normally, only download mode),
however, I do believe you can try with older version of firmware (probably last year?)
and try disable "auto-reboot" on the odin,
upon odin stated "reset" quickly pull out the battery (providing the screen is completely closed/off)
and try to reboot into recovery mode by it combinational keys, "volume up + home + power" (hold it a bit longer till samsung logo disappear) :silly:
I've even try to soft-bricked my S Plus, and try this one, seems I can boot both normally and recovery (to do wipe)

[Q] Note 4 N910T stuck on boot screen

Hi,
My phone -Note 4 N910T- is stucked at bootscreen, and it can not to boot into recovery mode too. It is bootloop after upgrading by OTA from Kitkat 4.4.4 - N910TUVU1ANK4.
I tried to flash stock firmware( using both "N910TUVU1ANK4" and "N910TUVU1COD6" ), or full files stock firmware ( included PIT files),but it hasn't worked. I also tried to flash by Smatch Swich, everything seem OK but it can not fix.
I attached some photos of my problem for your reference.
Please help me.
Thanks,

You didn't mention if you tried using Kies?

DigitalChris602 said:
You didn't mention if you tried using Kies?
Click to expand...
Click to collapse
I tried using Kies too, but it did not work.:crying::crying::crying:

I was going to suggest the same thing. Try using Kies and go to Tools\Emergency firmware recovery and see if that works.

Can you get into download mode?

Karakoram2 said:
Can you get into download mode?
Click to expand...
Click to collapse
Yes, I can. One of my attached photos has shown as above. I tried to flash via ODIN or Smart Switch ( Kies 3), the program has shown OK but I still got the problem.

saclyvn said:
Yes, I can. One of my attached photos has shown as above. I tried to flash via ODIN or Smart Switch ( Kies 3), the program has shown OK but I still got the problem.
Click to expand...
Click to collapse
It is pretty hard to brick these phones. Just in case you have a bad file or something. Grab the zip and follow these instructions. I know that all these files in this zip are good so it is worth a shot.
Even if you know what you are doing, follow the instructions exactly, you may be overlooking something. It happens to everyone sometimes.
http://forum.xda-developers.com/showpost.php?p=56226823&postcount=2

After you odin whichever firmware you flashed, wait about 10 min or so on that boot screen that is stucked. Then pull the battery out. Go into stock recovery but power+home+vol up. Then select wipe data/reset. Reboot and it should boot just fine.
At least that's how i fixed my phone that stuck few times like what you going through.

mutantblack said:
After you odin whichever firmware you flashed, wait about 10 min or so on that boot screen that is stucked. Then pull the battery out. Go into stock recovery but power+home+vol up. Then select wipe data/reset. Reboot and it should boot just fine.
At least that's how i fixed my phone that stuck few times like what you going through.
Click to expand...
Click to collapse
The problem is my phone can not access to stock recovery or TWRP recovery. It just stuck at first bootscreen which is shown "Samsung Galaxy Note 4 powered by Android", then restart and stuck again. So that I can not wipe data or reset to fix.

saclyvn said:
The problem is my phone can not access to stock recovery or TWRP recovery. It just stuck at first bootscreen which is shown "Samsung Galaxy Note 4 powered by Android", then restart and stuck again. So that I can not wipe data or reset to fix.
Click to expand...
Click to collapse
Since you can still get into download mode, what happens if you flash TWRP through ODIN? Step 10 in the instructions I posted assuming it is still rooted or start at step 8 if not. Just to see if you can get recovery working again.

You are wasting time...start over, it's your best and quickest fix....
http://forum.xda-developers.com/not...sy-steps-stock-odin-n910tuvu1anih-cf-t2903733

GT-I9295 Brick? Stock ROM fail on system.img.ext4 in Odin

Hi all.
A newbie, I ended up lost after trying to flash the latest CM 12.1 on my Samsung Galaxy S4 Active GT-I9295.
At first, there was an issue with the recovery, which upon entering showed black screen instead of the tool itself.
Trying to fix this, I managed to remove the recovery through flashing the Stock ROM, which has failed in Odin on the "system.img.ext4" instead - could not paste screenshot link here, feel free to ask for it, please!
I must say that I have tried hard to figure out what to do with the mess I have caused, but now I am helpless.
Would anyone give me some nice piece of advice to get my phone going again?
Thank you so much!

mcjenda said:
Hi all.
A newbie, I ended up lost after trying to flash the latest CM 12.1 on my Samsung Galaxy S4 Active GT-I9295.
At first, there was an issue with the recovery, which upon entering showed black screen instead of the tool itself.
Trying to fix this, I managed to remove the recovery through flashing the Stock ROM, which has failed in Odin on the "system.img.ext4" instead - could not paste screenshot link here, feel free to ask for it, please!
I must say that I have tried hard to figure out what to do with the mess I have caused, but now I am helpless.
Would anyone give me some nice piece of advice to get my phone going again?
Thank you so much!
Click to expand...
Click to collapse
Did you try odin 3.10 by any chance? That could be the problem. Use odin 3.07 or 3.09, boot manually into download mode with complete shutdown & using vol down + power key and odin the stock ROM, reboot and do the same with TWRP (hold down the vol up key after flashing recovery when it is rebooting)

JASONRR said:
Did you try odin 3.10 by any chance? That could be the problem. Use odin 3.07 or 3.09, boot manually into download mode with complete shutdown & using vol down + power key and odin the stock ROM, reboot and do the same with TWRP (hold down the vol up key after flashing recovery when it is rebooting)
Click to expand...
Click to collapse
Hi there, Jason.
Yes, I did exactly as you say - got to the download mode, plugged in, ran Odin (tried 3.10, 3.09 and 3 v1.85) started flashing the latest Stock ROM and the I only got as far as the "system.img.ext4", when the download failed. Sometimes that happened even earlier, saying that there was no PIT etc.
When trying to flash the CWM recovery, it goes through OK, but then when trying to get into it, the screen just goes black, as described in my previous thread - "CWM or TWRP Recovery Black Screen".
I am stuck.
But I still hope that I am not a proud brick owner
John

mcjenda said:
Hi there, Jason.
Yes, I did exactly as you say - got to the download mode, plugged in, ran Odin (tried 3.10, 3.09 and 3 v1.85) started flashing the latest Stock ROM and the I only got as far as the "system.img.ext4", when the download failed. Sometimes that happened even earlier, saying that there was no PIT etc.
When trying to flash the CWM recovery, it goes through OK, but then when trying to get into it, the screen just goes black, as described in my previous thread - "CWM or TWRP Recovery Black Screen".
I am stuck.
But I still hope that I am not a proud brick owner
John
Click to expand...
Click to collapse
Are you using the original USB cable if not then try with another cable. Also what is the device name shown when you boot into download mode

mcjenda said:
Hi all.
A newbie, I ended up lost after trying to flash the latest CM 12.1 on my Samsung Galaxy S4 Active GT-I9295.
At first, there was an issue with the recovery, which upon entering showed black screen instead of the tool itself.
Trying to fix this, I managed to remove the recovery through flashing the Stock ROM, which has failed in Odin on the "system.img.ext4" instead - could not paste screenshot link here, feel free to ask for it, please!
I must say that I have tried hard to figure out what to do with the mess I have caused, but now I am helpless.
Would anyone give me some nice piece of advice to get my phone going again?
Thank you so much!
Click to expand...
Click to collapse
Hi. Try this:
Remove the battery and USB cable from your phone, and wait at least 3 seconds.
Place the battery only back in your phone.
Fingers on volume down and home, then another on power. (cold boot directly into download mode - this is important!)
Press up to enter download mode.
Insert USB cable into phone and lie it down somewhere it won't move or be touched during the flash.
Download a good current copy of Odin from:
https://idlekernel.com/flash-tools/Odin_3.10.7.zip
Extract the archive and run Odin.exe
Download this emergency recover tar for your device (newest firmware revision available as of right now):
https://idlekernel.com/flash-tools/recover/BL_I9295XXUDPA4_RECOVER.tar.md5 (also has official TWRP 3.0.0-2)
Insert "BL_I9295XXUDPA4_RECOVER.tar.md5" in the [BL] slot.
In the Options tab put an [✔] in the "Phone Bootloader Update" checkbox.
If you don't have anything you need on your internal storage, put an [✔] in the "Nand Erase All" checkbox.
Click [Start].
Once the progress bar is near finished, place your fingers on volume up and home to enter directly into official TWRP 3.0.0-2.
If you used the "Nand Erase All" feature earlier, you will need to go into Wipe -> [Format Data] -> type "yes" for your data partition to be usable again.
Hopefully this will get you past your black screen issues.
PS. Remember to flash stock boot.img with your system.img.ext4, as you cannot boot a ROM without a matching boot image.