Database Develop

Unable to reboot in download mode

I find my newly purchased tab 8.9 very laggy with the stock TouchWiz
Before returning it I wanted ti try the Overcome rom to see if it can get any smoother.
I carefully followed there instructions but I am unable to go past the downloading droid. once I validate with the right button volume, the tablet simply reboots.
Does anyone else have this issue?

josibarns said:
I find my newly purchased tab 8.9 very laggy with the stock TouchWiz
Before returning it I wanted ti try the Overcome rom to see if it can get any smoother.
I carefully followed there instructions but I am unable to go past the downloading droid. once I validate with the right button volume, the tablet simply reboots.
Does anyone else have this issue?
Click to expand...
Click to collapse
Let me get this right: you sucessfully flashed Overcome, and want to ODIN but when you try to get in Download Mode, it reboots, is that it? If so, that's the first time I've heard this issue. How are you trying to enter Download Mode?

nirogu325 said:
Let me get this right: you sucessfully flashed Overcome, and want to ODIN but when you try to get in Download Mode, it reboots, is that it? If so, that's the first time I've heard this issue. How are you trying to enter Download Mode?
Click to expand...
Click to collapse
I am still with the Samsung original
I wanted to try the overcome ROM see if the lag disapears.
I am stuck in the first step when I need to flash CWR using Odin. I can't get into the download menu

josibarns said:
I am still with the Samsung original
I wanted to try the overcome ROM see if the lag disapears.
I am stuck in the first step when I need to flash CWR using Odin. I can't get into the download menu
Click to expand...
Click to collapse
I see. The Overcome thread also has the CWM Recovery as a .zip file which is flashable through Stock Recovery (same procedure as flashing Root). You just put the file in your internal SDcard and flash away. If you still have doubts, read a little bit here, as I'm sure that will clear any doubts you might have.

josibarns said:
I find my newly purchased tab 8.9 very laggy with the stock TouchWiz
Before returning it I wanted ti try the Overcome rom to see if it can get any smoother.
I carefully followed there instructions but I am unable to go past the downloading droid. once I validate with the right button volume, the tablet simply reboots.
Does anyone else have this issue?
Click to expand...
Click to collapse
u have to press the power and the left-volume button for about 15sec

nirogu325 said:
I see. The Overcome thread also has the CWM Recovery as a .zip file which is flashable through Stock Recovery (same procedure as flashing Root). You just put the file in your internal SDcard and flash away. If you still have doubts, read a little bit here, as I'm sure that will clear any doubts you might have.
Click to expand...
Click to collapse
Perfect it worked! And I was also able to install the Overcome ROM It seems to be more battery hungry and a bit faster
DonKomposto said:
u have to press the power and the left-volume button for about 15sec
Click to expand...
Click to collapse
Yes I have done that and I get to the menu with the droid blinking with "downloading" written under it. The issues is when I validate instead of showing the dowload menue it simply reboots...

josibarns said:
Perfect it worked! And I was also able to install the Overcome ROM It seems to be more battery hungry and a bit faster.
Click to expand...
Click to collapse
Don't expect perfection from a port, ever (port = a ROM that's not native to the device). The motley kernel, along with UV can help you in the battery department.
Sent from my GT-P7310

Sorry to comeback to it but after having flashed a couple or ROM with CWM I want to come back to the stock rom using ODIN and I cannot enter the dowload menu.
My system right now is a stock ROM us retail P7310UEKHA flashed with CWM and CWM and I want to install a 3.2 stock ROM using ODIN.
The way I try to access the download menu is
1. Turn off the tab
2. wait 30 sec
3. restart with the down volume pressed
4. when the reaching the menu between recovery and dowloading. Select dowloading with the down volume button and validate with the up volume button.
Result: a black screen for 3 seconds and then the tab reboots

josibarns said:
Sorry to comeback to it but after having flashed a couple or ROM with CWM I want to come back to the stock rom using ODIN and I cannot enter the dowload menu.
My system right now is a stock ROM us retail P7310UEKHA flashed with CWM and CWM and I want to install a 3.2 stock ROM using ODIN.
The way I try to access the download menu is
1. Turn off the tab
2. wait 30 sec
3. restart with the down volume pressed
4. when the reaching the menu between recovery and dowloading. Select dowloading with the down volume button and validate with the up volume button.
Result: a black screen for 3 seconds and then the tab reboots
Click to expand...
Click to collapse
A corrupt bootloader that may be. Reflash KHA (CWM version alterbridge posted) to see if it solves it.
Sent from my SGH-T959.

Just to precise this issue was present out of the box when I got it from best buy...

josibarns said:
Just to precise this issue was present out of the box when I got it from best buy...
Click to expand...
Click to collapse
flash a stock bootloader and a stock recovery using nvflash, im in a hurry now and dont have time to explain, use google, you will find all the info in the tab 10.1 forum.

lupu666ro said:
flash a stock bootloader and a stock recovery using nvflash, im in a hurry now and dont have time to explain, use google, you will find all the info in the tab 10.1 forum.
Click to expand...
Click to collapse
Thanks lupu666ro. I've tried installing stock Rom with CMW but nothing works. I have found very sparse info about nvflash. It looks like the solution but I'm a bit wary about tring this without a instructions. Could give me more info or point me to a tutorial
Thanks!

Still no luck...
So I have tried reflashing the stock US retail ROM and ran the EULA3 OTA update over it. I can't seem to figure this out.
The OTA update entered the download mode for a few seconds during the update so I am wondering if I don't simply have a locked bootloader.
I have made a video to show the problem: http://youtu.be/b09-x31ldbs

josibarns said:
So I have tried reflashing the stock US retail ROM and ran the EULA3 OTA update over it. I can't seem to figure this out.
The OTA update entered the download mode for a few seconds during the update so I am wondering if I don't simply have a locked bootloader.
I have made a video to show the problem: http://youtu.be/b09-x31ldbs
Click to expand...
Click to collapse
here is a tutorial on how to use nvflash, this will repair you tablet. http://forum.xda-developers.com/showthread.php?t=1130574

On the download warning screen you are hitting volume down, not up. Volume up is the button closest to the headphone jack..
josibarns said:
So I have tried reflashing the stock US retail ROM and ran the EULA3 OTA update over it. I can't seem to figure this out.
The OTA update entered the download mode for a few seconds during the update so I am wondering if I don't simply have a locked bootloader.
I have made a video to show the problem: http://youtu.be/b09-x31ldbs
Click to expand...
Click to collapse
Sent from my SAMSUNG-SGH-I957 using XDA App

neubauej said:
On the download warning screen you are hitting volume down, not up. Volume up is the button closest to the headphone jack..
Click to expand...
Click to collapse
Ok I am really ashamed on this one, you were right I've been hitting the wrong button for all my attempts
Thanks a lot neubauej!!!!!

Lol, no problem, glad it was simple.
Sent from my SAMSUNG-SGH-I777 using XDA App

corrupted recovery

First thank you for all the wonderful work there to help us make the best out of this phone.
Yesterday, I tried to install the CM10 ROM (cm-10-20121126-UNOFFICIAL-ancora_tmo) but encountered a serious problem. Since I flashed a custom ROM last time in Aug., I haven't updated the recovery (CWM-base Recovery v5.5.0.4b). When I booted into the recovery, I found it lost all its functionality. To be specific, any selection on menu options (reboot system now, ROMwipe, wipe cache, etc.) yielded no result but a screen with a circling arrow covered by a hat. After that only the power button worked and it would simply bring you back to the main menu. I tried to communicate with the phone in ADB mode and it worked (by that I mean I can reboot it from windows command shell: adb reboot recovery). Now I have no way to update the recovery and install new ROM from there.
Any help would be highly appreciated.

If you can communicate via windows then install Odin and flash from it. Full instructions is on the wiki page
http://forum.xda-developers.com/wiki/Samsung_Exhibit_II_4G
Sent from my CM10 Linero Odexed Powered by Evil

ywhui30 said:
First thank you for all the wonderful work there to help us make the best out of this phone.
Yesterday, I tried to install the CM10 ROM (cm-10-20121126-UNOFFICIAL-ancora_tmo) but encountered a serious problem. Since I flashed a custom ROM last time in Aug., I haven't updated the recovery (CWM-base Recovery v5.5.0.4b). When I booted into the recovery, I found it lost all its functionality. To be specific, any selection on menu options (reboot system now, ROMwipe, wipe cache, etc.) yielded no result but a screen with a circling arrow covered by a hat. After that only the power button worked and it would simply bring you back to the main menu. I tried to communicate with the phone in ADB mode and it worked (by that I mean I can reboot it from windows command shell: adb reboot recovery). Now I have no way to update the recovery and install new ROM from there.
Any help would be highly appreciated.
Click to expand...
Click to collapse
This may seem stupid but how are you selecting something? You should use home capacitive not the power to select. This symptom is the result of tapping the power button, its kinda like sleep
Sent from my Nexus 7 using xda app-developers app

afwolfpacked said:
If you can communicate via windows then install Odin and flash from it. Full instructions is on the wiki page
http://forum.xda-developers.com/wiki/Samsung_Exhibit_II_4G
Sent from my CM10 Linero Odexed Powered by Evil
Click to expand...
Click to collapse
I'd followed the instruction and found the Odin rebooted to the exact recovery! There it showed a few lines like:
Galaxy Exhibit CWM-based Recovery v5.5.0.4b
Finding update package ...
Opening update package ...
Verifying update package ...
E: failed to verify whole-file signature
E: signature verification failed
Installation aborted.
Now the phone can not boot into the original ROM.

When booted into recovery use volume keys to navigate in cwm. Also retry to download the ROM and try cwm before Odin.
Odin is on computer and phone is hooked via USB cable. It cannot boot into cwm if followed Odin. You ha e to download Odin and drivers for cell to be recognized.
Do a YouTube search for Odin and watch the vid it will show you. Be it noted that cell will need to be set into download mode and USB enabled.
Sent from my CM10 Linero Odexed Powered by Evil and or DemonsBlood

theAPANT said:
This may seem stupid but how are you selecting something? You should use home capacitive not the power to select. This symptom is the result of tapping the power button, its kinda like sleep
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
Yes, I used the home capacitive to select those options on the main menu. No matter what I choose, however, the power button can get me the circling arrow with a hat. Another push on the button, you are back on the main menu.

You are deffeinitly booted into cwm so I suspect from the install error that the signature verification is what's failing. Try another ROM or redownload and try again
Sent from my CM10 Linero Odexed Powered by Evil and or DemonsBlood

afwolfpacked said:
You are deffeinitly booted into cwm so I suspect from the install error that the signature verification is what's failing. Try another ROM or redownload and try again
Sent from my CM10 Linero Odexed Powered by Evil and or DemonsBlood
Click to expand...
Click to collapse
I've redownloaded the uvlg3.odin.zip package and checked its MD5. Everything is OK. Then followed the instruction on the Wiki page, but ended on the same CWM recovery screen with the same error message.
The problem is: it seems like the phone boots successfully into the recovery, but it only shows the main menu with no option functioning (like I described before).
Has anyone read about similar problem anywhere before?

ywhui30 said:
I've redownloaded the uvlg3.odin.zip package and checked its MD5. Everything is OK. Then followed the instruction on the Wiki page, but ended on the same CWM recovery screen with the same error message.
The problem is: it seems like the phone boots successfully into the recovery, but it only shows the main menu with no option functioning (like I described before).
Has anyone read about similar problem anywhere before?
Click to expand...
Click to collapse
Are you running Odin with your phone in Download mode? Like they said, Odin shouldn't re/boot into recovery automatically.
Also make sure the auto reboot option in odin is cleared.
Sent from my GT-P5110 using XDA Premium HD app

[RECOVERY]SPH-L720 OUDHS Recovery

Shabbypenguin and the OUDHS
presents to you
OUDHS Touch CWM-based Recovery 1.0.3.3
for your Sprint Samsung Galaxy S 4
Read this whole post before doing anything ​
Enjoy
OUDHS CWM-based Recovery 1.0.3.3
Odin 3.04
Directions:
1) Download the above files
2) Extract Odin3-3.04.zip and copy the tar that you downloaded into the folder
3) Run Odin as an administrator
4) Power your device off
5) Press and hold volume down, home, and power to enter download mode
6a) Connect your phone to your computer
6b) Wait for drivers to finish installing if they need to be
7) You should see Odin find your device by marking a blue square in the ID COM box
8) Click on PDA and choose the recovery tar you downloaded
9) Click start
10) when it says finished you need to beat your phone in a race
11) you need to unplug it and press and hold volume up and power until the blue text appears
12) let go
13 once you have booted into recovery it will handle the script that installs stock recovery if its present.
-------------------------------------------------------------------------------------------------------------------------------------------------
Congrats you now have CWM now if you wish to root youll need to follow these instructions
-------------------------------------------------------------------------------------------------------------------------------------------------
Superuser-1.0.1.1.zip
Directions:
1) Download the above file
2) Connect your phone and copy them to your phone
3) Once they are copied power down your device
4) Hold volume up and power to enter recovery
5) Navigate recovery by using the volume keys and power to select
6) Choose install zip from sdcard, then pick internal or external (where you copied it to)
7) Scroll down to the Superuser.zip and select it to install
-------------------------------------------------------------------------------------------------------------------------------------------------
Congrats you are rooted! this procedure will work on any firmware update you guys get
-------------------------------------------------------------------------------------------------------------------------------------------------
With the SGS4 samsung has introduced a setuid kernel, which will block root access. you will need to flash a source compiled kernel in order to fully root.
Source for jfltespr​
Credits:
Members of the Official Unloved Devices Hit Squad (OUDHS) for being the best we can for those whom need us
garwynn for helping with setting up jflte-common stuff
MoHoGalore for testing so many times

Awesome! Thanks to the devs!

Awesome! Good to see ya around here Shabby!
Sent from my SPH-L720 using Tapatalk 2

Good deal. Thanks Shabby!
Sent from my SPH-L710 using Xparent Skyblue Tapatalk 2

Just successfully flashed OUDHS CWM-based Recovery 1.0.3.0 successfully...haven't tried much of the functionality until I fix my phone from the bootloop I put it in.
Something I did notice while navigating around the menu using my volume keys was that the screen was only refreshing every other keypress. I know that the state of the program was changing but the screen was only redrawing every other input.

harrybozack said:
Just successfully flashed OUDHS CWM-based Recovery 1.0.3.0 successfully...haven't tried much of the functionality until I fix my phone from the bootloop I put it in.
Something I did notice while navigating around the menu using my volume keys was that the screen was only refreshing every other keypress. I know that the state of the program was changing but the screen was only redrawing every other input.
Click to expand...
Click to collapse
yea was an issue on the note 2 at launch as well, they fixed it so i just gutta figure out how. mind testing twrp?

shabbypenguin said:
yea was an issue on the note 2 at launch as well, they fixed it so i just gutta figure out how. mind testing twrp?
Click to expand...
Click to collapse
Not at all...in fact it was the first one I tried. The graphics were completely screwed up and unable unfortunately

harrybozack said:
Not at all...in fact it was the first one I tried. The graphics were completely screwed up and unable unfortunately
Click to expand...
Click to collapse
possible for you to take a picture? i cant go forward with fixing it til i have an idea of what might be the hangup :/

http://forum.xda-developers.com/showthread.php?t=2254323 This CWM based recovery also has the same redraw problem yours does.

harrybozack said:
http://forum.xda-developers.com/showthread.php?t=2254323 This CWM based recovery also has the same redraw problem yours does.
Click to expand...
Click to collapse
yea thats because i made mine while he worked on the common stuff. he is trying to get cm going while i want to get cwm/twrp. i leave the roms and stuff to people who are invested in the device

shabbypenguin said:
possible for you to take a picture? i cant go forward with fixing it til i have an idea of what might be the hangup :/
Click to expand...
Click to collapse
http://img12.imageshack.us/img12/1061/img20130428102510.jpg

harrybozack said:
http://img12.imageshack.us/img12/1061/img20130428102510.jpg
Click to expand...
Click to collapse
recompiling with teh fix now
www.shabbypenguin.com/OUDstuff/Samsung/Sprint/jfltespr/Recovery/TWRP-jfltespr-Test-2.tar
should fix slanty graphics

Flashed fine, graphics good but can't navigate anywhere.

lafester said:
Flashed fine, graphics good but can't navigate anywhere.
Click to expand...
Click to collapse
twrp? or cwm? a bit more info please

lafester said:
Flashed fine, graphics good but can't navigate anywhere.
Click to expand...
Click to collapse
I got this same result. Seems to freeze right away. TWRP-jfltespr-Test-2.tar

k can you get /tmp/recovery.log pulled for me please
edit: test 3 to see if this fixes anything:
www.shabbypenguin.com/OUDstuff/Samsung/Sprint/jfltespr/Recovery/TWRP-jfltespr-Test-3.tar

shabbypenguin said:
k can you get /tmp/recovery.log pulled for me please
edit: test 3 to see if this fixes anything:
www.shabbypenguin.com/OUDstuff/Samsung/Sprint/jfltespr/Recovery/TWRP-jfltespr-Test-3.tar
Click to expand...
Click to collapse
sorry been testing cwm but yeah I was talking about twrp. its just the touchscreen not registering will test again in a sec

I had the same problem as the guy above and tried the test 3 tar and it fixes the screen but no touch function.
also just tried CWM recovery and it was only letting me go to every other selection then rebooted all on its own.

LG710S34LYFE said:
I had the same problem as the guy above and tried the test 3 tar and it fixes the screen but no touch function.
also just tried CWM recovery and it was only letting me go to every other selection then rebooted all on its own.
Click to expand...
Click to collapse
Please don't forget to post in the CWM thread as well so no information is lost to the that effort.

LG710S34LYFE said:
I had the same problem as the guy above and tried the test 3 tar and it fixes the screen but no touch function.
also just tried CWM recovery and it was only letting me go to every other selection then rebooted all on its own.
Click to expand...
Click to collapse
confirmed test 3 did not fix the touch screen issue. cwm will sometimes double click and is tricky to navigate with the graphics issue but functions normally otherwise. did a full wipe and restore booted fine both times with no permissions issues. this was garwyns version btw.

[Recovery] & [Root] [T211] TWRP 2.7.1.0.KK Unofficial

READ THIS POST BEFORE INSTALLING ANY CUSTOM RECOVERY
Updated to version 2.7.1.0.KK on 10-28-14. Now works with KitKat (and older JB) bootloaders.
Now properly supports all set_metadata functions in newer updater-scripts.
Click HERE for the latest version.
Please report any bugs here in this thread.
Please take a moment to say thanks and/or donate to @ketut.kumajaya for helping us out.
I have a T210R, so I haven't tested on a T211.
Credits go to:
@ketut.kumajaya for working kernel
@Jamison904 for giving us root
@hkjr for getting ketut to help
and of course the Team Win group
Instructions for ODIN
1. Download ODIN on your computer.
2. Power off the device.
3. Restart in "Download Mode" by holding the "HOME" button, "Volume Down" and "Power" all at the same time (for about 5 seconds).
4. Hit the "Volume Up" to enter download mode.
5. Start the ODIN exe program. Un-check Auto Reboot. See notes about ODIN below.
6. Connect the device via USB to your computer. Verify the device shows as "Added" in the Message box. If it doesn't show then you need the Samsung USB drivers (just install KIES to get them).
7. Select "PDA" then choose the recovery file you want to flash.
8. Hit "START". Wait for Odin to finish (~10-15 seconds). The message area will display "RES OK" when finished.
9. Wait for device to restart. Skip this step if you unchecked auto reboot.
10. Restart directly to recovery mode before rebooting into OS.(Hold POWER, Volume UP, and the HOME button all at the same time. When you see the Samsung Logo, let go of the POWER button, but keep holding the Volume UP and HOME until you see the recovery screen).
After you get the custom recovery working, you can flash the latest SuperSu zip to get root.
Your internal SDcard will get mounted as "/data/media". So look there for any files saved to the internal card.
Notes about ODIN
--Make sure that "Re-Partition" is NOT checked.
--Auto Reboot can be un-checked if TWRP doesn't flash correctly on your device. Some have reported that un-checking Auto Reboot fixes this issue. If you un-check Auto Reboot, you will need to reboot the device yourself (refer back to step 10).
Instructions for recovery flashable version:
Boot into your previously installed custom recovery.
Select the Install Zip option.
Find the recovery zip.
Flash.
Reboot recovery.
Enjoy your new recovery.
Flash at own risk!!!!
+++++++++++++++++++++++++++++++
+++++++++++++++++++++++++++++++
Click HERE for the latest version.

Reserved

sormat1 from 4PDA reported:
Sorry, qiuck Translate by Google:
Loaded, but the buttons do not match the strong places of pression, which will invoke the appropriate menu button.
The same is within of menu: you press on an arbitrary place, but opens something another.
Click to expand...
Click to collapse
See: http://4pda.ru

Dasdranamin said:
sormat1 from 4PDA reported:
Sorry, qiuck Translate by Google:
See: http://4pda.ru
Click to expand...
Click to collapse
Thanks for the report, will look into it.

Hey @ketut.kumajaya, it seems the touchscreen needs to be rotated for this one. I would attempt to fix it, but we all know you can do it much, much better (and I don't want to start all over without your kernel source)
EDIT: I used the new zImage from the 1.8 T210(R) version in my T210(R) TWRP and the touchpoints are off in it as well. Looks like the previous touch orientation fix you made got overwritten with the new update.
Looks like it only needs to be rotated clockwise 90 degrees (not flipped, just rotated).

gr8nole said:
Hey @ketut.kumajaya, it seems the touchscreen needs to be rotated for this one. I would attempt to fix it, but we all know you can do it much, much better (and I don't want to start all over without your kernel source)
EDIT: I used the new zImage from the 1.8 T210(R) version in my T210(R) TWRP and the touchpoints are off in it as well. Looks like the previous touch orientation fix you made got overwritten with the new update.
Looks like it only needs to be rotated clockwise 90 degrees (not flipped, just rotated).
Click to expand...
Click to collapse
Did you set the touchscreen orientation to landscape?
Code:
write /sys/devices/virtual/sec/tsp/orientation 6

ketut.kumajaya said:
Did you set the touchscreen orientation to landscape?
Code:
write /sys/devices/virtual/sec/tsp/orientation 6
Click to expand...
Click to collapse
How do I set that for the recovery? init.rc?
Sent from my DROID RAZR MAXX HD

gr8nole said:
How do I set that for the recovery? init.rc?
Sent from my DROID RAZR MAXX HD
Click to expand...
Click to collapse
Like this: http://forum.xda-developers.com/showpost.php?p=39935850&postcount=89

ketut.kumajaya said:
Like this: http://forum.xda-developers.com/showpost.php?p=39935850&postcount=89
Click to expand...
Click to collapse
Ha...it was already in there, but it was commented out.:laugh:

Dasdranamin said:
sormat1 from 4PDA reported:
Sorry, qiuck Translate by Google:
See: http://4pda.ru
Click to expand...
Click to collapse
New version uploaded with touchscreen orientation fixed.

gr8nole said:
New version uploaded with touchscreen orientation fixed.
Click to expand...
Click to collapse
Thank You.
All works properly! :good:

It works for me.
Thank you very much.

only worked with external sd attached....without it, the recovery cannot read internal sdcard...cmiiw...

godh3ll said:
only worked with external sd attached....without it, the recovery cannot read internal sdcard...cmiiw...
Click to expand...
Click to collapse
Not true...your internal SDcard is mounted as "/data/media". Navigate to that folder and you will find everything on your internal card. You will have to hit the "Up one level" button to find it.
EDIT: I will add a note to the OP about this.

Now that there's root and recovery, has anyone flashed a successful ROM for the T211?

gr8nole said:
Not true...your internal SDcard is mounted as "/data/media". Navigate to that folder and you will find everything on your internal card. You will have to hit the "Up one level" button to find it.
EDIT: I will add a note to the OP about this.
Click to expand...
Click to collapse
Yup my mistaken...the zip was there in media folder..
BiG JeW said:
Now that there's root and recovery, has anyone flashed a successful ROM for the T211?
Click to expand...
Click to collapse
Off course, I flashed the only ROM for T211, infamous combined with black hawk kernel..
Sent from my SM-T211 using Tapatalk 4 Beta

godh3ll said:
Yup my mistaken...the zip was there in media folder..
Off course, I flashed the only ROM for T211, infamous combined with black hawk kernel..
Sent from my SM-T211 using Tapatalk 4 Beta
Click to expand...
Click to collapse
you did how does this rom work any performance improvements any issues .. i want to flash it myself

jetboss said:
you did how does this rom work any performance improvements any issues .. i want to flash it myself
Click to expand...
Click to collapse
Didnt test all the function yet...but stable for daily use, still laggy sometimes, I wonder when we got official 4.2 or skip to 4.4? Anyhow, just test the rom yourself based on cuŕiosity..
Sent from my SM-T211 using Tapatalk

godh3ll said:
Didnt test all the function yet...but stable for daily use, still laggy sometimes, I wonder when we got official 4.2 or skip to 4.4? Anyhow, just test the rom yourself based on cuŕiosity..
Sent from my SM-T211 using Tapatalk
Click to expand...
Click to collapse
might just have to do that well from seeing the requirements on kit kat i believe we will get an official update but when i dont know Samsung kinda slow when releasing updates so just hoping some devs do something soon

sorry sir, i try using this cwm but fail in progress. Now my startup just say "firmware upgrade encountered an issue. please select recovery mode in kies & try again".
Would shut i do sir.
Thanks

[Q] stuck on teamwin logo

i'm using omnirom 4.4.2 but i want to upgrade to 4.4.4 but everytime i boot to recovery i'm stucked at teamwin logo

Bad luck...
Could you give some more info? Did you do a factory reset? What ROM exactly did you flash? Why don't you just wait that someone answers your question?
Gesendet von meinem GT-N7000 mit Tapatalk

Arals said:
i'm using omnirom 4.4.2 but i want to upgrade to 4.4.4 but everytime i boot to recovery i'm stucked at teamwin logo
Click to expand...
Click to collapse
With it a couple of minutes and see if you get the options.

I'm using omni ROM 4.4 since nov2013. This all started when I flashed the 050514 build. I did not do factory reset because i'm using omnirom before

I waited for a few minutes. Still nothing goes to teamwin logo then black screen then teamwin logo then black screen over and over

Arals said:
I waited for a few minutes. Still nothing goes to teamwin logo then black screen then teamwin logo then black screen over and over
Click to expand...
Click to collapse
Download philz XXLTA tar kernel file and flash using odin, uncheck auto reboot. . Power off and boot into recovery. Then flash raw kernel and flash your ROM again.

nokiamodeln91 said:
Download philz XXLTA tar kernel file and flash using odin, uncheck auto reboot. . Power off and boot into recovery. Then flash raw kernel and flash your ROM again.
Click to expand...
Click to collapse
It worked. Thanks. Just got a orange triangle on Samsung logo

Arals said:
where could i download it?
Click to expand...
Click to collapse
Use the search

Can you explain this process to a noob, please
nokiamodeln91 said:
Download philz XXLTA tar kernel file and flash using odin, uncheck auto reboot. . Power off and boot into recovery. Then flash raw kernel and flash your ROM again.
Click to expand...
Click to collapse
I am more or less a noob so I need very precise instructions if I am to follow your advice.
I have a rooted N7000 running Asylum Omnirom 4.4.2. (Omni version 4.4.2-20140318-Asylum-N7000, Baseband N7000XXLT3 Kernel version 3.0.64-666-g5984047 [email protected] #1 Tue Mar 18 05:29:00 CET 2014 Asylum Omni Build omni_n7000-userdebug 4.4.2 KVT49L Eng.chasmodo.20140318.045429 test-keys)
I have TWRP on it (unsure of the version - all the software I used to root my phone is on my external harddrive at home.). This morning it was working fine but then rebooted unexpectedly. When it powered back on, it got stuck at the Samsung screen, so I rebooted but it was still stuck so I pulled the battery to reboot. No good, still in bootloop. So went into recovery mode and did factory reset/wipe data. It started but saw no progress whatsoever (i.e. no blue colour overtaking the grey along the spinning bar showing it was progressing along). I had to do some other things so left it plugged into the wall charger (battery was at about 78% when it rebooted but I did have both bluetooth and wifi running so that could really drain it). When I returned about 40 minutes later it was back at the Samsung screen. Now if I try to go into recovery, I get the TEAMWIN splash screen but it never goes beyond that. Tried pulling the battery, sim card, SD card, and various combinations. Tried a different battery, tried all sorts of variations I found searching but none have gotten me either past the Samsung screen if I try to boot up normally, or past the TEAMWIN screen if I try to boot into recovery.
I found this thread from last year and I am hoping this will work for my situation. However, I have never used ODIN (it seems to be there if I do the Volume down-power-home combination) so I want to make sure I understand this precisely. When you say flash the raw kernel, what precisely are you referring to? When I originally rooted my phone I just followed a YouTube video and don't recall having a "raw kernel". So I need some guidance as to what you mean by this, please.
Thanks
jah732

jah732 said:
I found this thread from last year and I am hoping this will work for my situation. However, I have never used ODIN (it seems to be there if I do the Volume down-power-home combination) so I want to make sure I understand this precisely. When you say flash the raw kernel, what precisely are you referring to? When I originally rooted my phone I just followed a YouTube video and don't recall having a "raw kernel". So I need some guidance as to what you mean by this, please.
Thanks
jah732
Click to expand...
Click to collapse
Search for Philz thread for N7000.. go to the 3rd post where it says TW kernels and download the xxtla kernel.. download odin 1.85 from google. Make sure you have Samsung usb drivers installed.. If not, google that too and download from Samsung developer site. Install it.. Make sure you have no kies processes running in the task manager.
Boot the phone in download mode and connect to PC. open odin as admin. (watch Youtube video for how to flash using odin)
Select the kernel file in PDA and uncheck the autoreboot option..
flash.. Once you get a green pass or res ok.. remove the cable and remove the battery.
Boot into recovery by pressing the vol up+home+home (obviously put the battery back in)
You should get Philz recovery.. Check and proceed from there.