[Q] [CM10] USB Mass Storage not working. - Galaxy S I9000 Q&A, Help & Troubleshooting

Hi all. I'm wondering if anyone who has experienced this could help me out.
I am running stable. I am unable to mount USB storage on the phone. It works fine in ClockWorkMod, but not when the ROM starts up. When I connect the USB, the USB debugging notification comes up, but no option to mount the USB. Any thoughts?

Me too but in JB
Sent from my GT-I9000 using xda premium

Anyone?

Related

[Q] Help, I cannot write to my external microsd [SOLVED]

I don't know why, I'm in mass storage mode and I expected to just be able to copy and paste files like in Samsung Wave (or any other phones) but I cannot do it in Galaxy S.
Never liked mass storage mode. Enable USB debugging mode instead. Go to menu ->settings ->Applications -> Development -> USB debugging. Once connected to the PC, pull down the notification menu and select connect.
Thank you. Tried it but it doesn't work too. The micro sd partitions do not appear even if usb mode (debugging) is connected already.
Am I the only one experiencing this?
did you pull the notification bar and choose to connect to ur comp? if ur on froyo, once you click " mass storage " you should then see a green android on the screen with the option to connect to the computer. if you dont see the notification, unplug the usb and try again.
SOLVED after updating my firmware to JPU. Thank you for the help guys! It was as I suspected. For some reason, my phone owned the external microsd's filesystem after formatting (I was using JP2 firmware). I formatted it again after flashing to JPU and voila, all problems fixed.

Can't mount SD after flash to ICS

Hi, i just flashed the ICS alpha 6 to my capitavte and im trying to mount my sd to my computer but when i plug it in, i get no options to choose mass storage and etc. Anybody know how to fix this?
Make sure usb debugging is checked.
Sent from my SAMSUNG-SGH-I897 using XDA App
nothing happens when i check the debugging
ICS removes the USB feature of the phone, you have to mount in Recovery.
Sent from my I897 using xda premium

[Q] Not able to Mount USB Storage in CWM

I recently upgraded from CM7 XRON to Classicnerd ICS and for some reason, I cannot access the USB Storage via CWM or through MTP in ICS. The only way that works for me is to boot up WebOS and mount the USB drive. Just wondering if anyone has experienced this same issue, or is aware of a fix for it? Thanks!
Make sure MTP is set under storage settings.
I also found I had to disable USB debugging under the developer options to connect to my XP PC.
I did both of those things, that is what is so strange. I am on Windows 7. Oh well, at this point I will just boot into webOS to access the sd card, just a pain to do that.
Use airdroid....no need of USB mounting....
Sent from my Touchpad using xda premium
I just had the same problem. Updated from Xronified CM7 to CM9. USB won't work in either mode.
update: Found the solution here...
http://rootzwiki.com/topic/16928-solved-installed-cm9-pc-will-not-recognize-as-usb-device/
USB problems
Ravynmagi said:
I just had the same problem. Updated from Xronified CM7 to CM9. USB won't work in either mode.
Click to expand...
Click to collapse
I seem to have problems with certain USB ports on my laptop. One will not work at all while the other works fine. I always recommend trying an alternate port on your laptop/desktop if you think all your settings are fine in CM.

CM9 Galaxy Note Nightly - USB Mount

I have installed the latest nightly for my galaxy note and I can't mount properly my storage. The USB prompt doesnt come up on the notification drawer.. Any ideas?
When plugging in your phone into usb, just go to settings-->Applications-->Development and check the USB debugging .If you can't mount SD Card and your pc doesn't recognise it then Your USB is bricked .. There is a tutorial on the forums that will help you with that : http://forum.xda-developers.com/showthread.php?t=691187
That's a known issue with CM, unfortunately. There are apps on the market that allow you to mount storage, although I use Airdroid.
Since using this I don't even care about the issue
eug3n91 said:
Since using this I don't even care about the issue
Click to expand...
Click to collapse
Argh.. Are the devs aware of this? They need to fix it Also the phone randomly shuts off when the performance option is selected in the performance options..
Go to, setting> developer options and tick the usb debugging
Now go to settings> storage and press the menu key and choose the usb computer connection and tick the mass storage
Now you have the option of usb debugging in your notification when you connect your device to computer
Sent from my GT-N7000 using xda premium
danteoo7 said:
Go to, setting> developer options and tick the usb debugging
Now go to settings> storage and press the menu key and choose the usb computer connection and tick the mass storage
Now you have the option of usb debugging in your notification when you connect your device to computer
Click to expand...
Click to collapse
Thanks for your advise, but it does not work at all... :crying:
The funny thing is that is used to work after installation of the nightley build 2 days ago. But suddendly it stopped working...
Even a re-install of the the older (or newer build) does not bring it back... :-(
Any other ideas?
With kind regards
Joe
Use multi mount SD card app from Google play it working fine
Sent from my GT-N7000 using xda premium
danteoo7 said:
Use multi mount SD card app from Google play it working fine
Click to expand...
Click to collapse
Hmmm, the recent comments from users in Google Play (on the ad-version and the paid one) are very negative, and explicitly say that it does not work (anymore?) on CM9...
But I will give it a try today evening...
With kind regards
Joe
I am using Multi mount and its working fine
Sent from my GT-N7000 using xda premium

[ROM][CM10.1][JB][4.2.2][SGT7][P1000/N/L/CDMA][OpenPDroid][20130315]

Hi All,
I'm newbie to this area and I just flashing my P1000 into CM10.1 with JB 4.2.2. Everything is work fine for me and I love the PDroid Manager function very much too!
The only problem that I encountered now is the USB mass storage function. When i plug in the USB cable into desktop computer, it only shows external SD card drive but internal SD card drive shows nothing whereby lots of data were stored into internal SD card.
Does anyone help to enlightening me on how to get back to live for my internal SD card drive?
Thanks in advance!
Regards,
littlejohn799
littlejohn799 said:
Hi All,
I'm newbie to this area and I just flashing my P1000 into CM10.1 with JB 4.2.2. Everything is work fine for me and I love the PDroid Manager function very much too!
The only problem that I encountered now is the USB mass storage function. When i plug in the USB cable into desktop computer, it only shows external SD card drive but internal SD card drive shows nothing whereby lots of data were stored into internal SD card.
Does anyone help to enlightening me on how to get back to live for my internal SD card drive?
Thanks in advance!
Regards,
littlejohn799
Click to expand...
Click to collapse
Try to disable and re-enable the mass storage.
The error should only occur after the boot.
Bye. Paolo.
alessandronip said:
Try to disable and re-enable the mass storage.
The error should only occur after the boot.
Bye. Paolo.
Click to expand...
Click to collapse
Hi Paolo,
Thanks for your advice. However, I tried to disable & re-enable the mass storage under storage - USB computer connection still can't solve my problem as computer keep asking to "insert a disk" when I click the internal SD card drive.
Any idea?
Thanks.
hi all,
after reset all setting to default factory setting, the internal SD card mass storage issue had been settled. Thanks for your concern and advice.
regards,
littleJohn
hi there,
i installed the rom is its fine, but i cant connect it to my pc ..
I researched the problem already and a solution should be to dial *#7284# into the dialpad and enter some kind of menu... but it doesn´t happen for me :<
anyone an idea ?
appreciate it
Corey- said:
hi there,
i installed the rom is its fine, but i cant connect it to my pc ..
I researched the problem already and a solution should be to dial *#7284# into the dialpad and enter some kind of menu... but it doesn´t happen for me :<
anyone an idea ?
appreciate it
Click to expand...
Click to collapse
Connect to your PC?
You are not being clear.
You connect it using the USB cable.
If you meant to say the PC can't detect it, you still have to tell in what way, as storage, in Odin, etc, etc?
Sent from my GT-P1000 using xda app-developers app
priyana said:
Connect to your PC?
You are not being clear.
You connect it using the USB cable.
If you meant to say the PC can't detect it, you still have to tell in what way, as storage, in Odin, etc, etc?
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
yeah, im connecting it to my pc and it doesnt appear in windows as mass storage
hardware manager shows "7 CDC´s" as a missing driver ..
and i figured i have to enter some kind of menu, dialing *#7284# into dialpad to reset the usb settings of the tablet
but the menu doesnt appear if i dial the number ..
Corey- said:
yeah, im connecting it to my pc and it doesnt appear in windows as mass storage
hardware manager shows "7 CDC´s" as a missing driver ..
and i figured i have to enter some kind of menu, dialing *#7284# into dialpad to reset the usb settings of the tablet
but the menu doesnt appear if i dial the number ..
Click to expand...
Click to collapse
Have you set Fast Charger?
If set can not use mass storage.
Bye. Paolo.
alessandronip said:
Have you set Fast Charger?
If set can not use mass storage.
Bye. Paolo.
Click to expand...
Click to collapse
fast charge is off
Hi All,
Same problem comes back again after I've done factory reset to my GT-P1000. Besides this, I discover that the radio keeps telling me no service but I still can access my mail using mobile data network (not WiFi).
Other than these, my GT-P1000 will reboot itself automatically. Please be informed that I did flashing this from original GB to this ROM directly.
Is there any advice can be taken? I don't wish keep factory resetting my GT-P1000 in order to access the internal SD again.
Another issue need to find out is how to switch the picture storage location from internal SD to external SD after camera snapped?
Please help, thanks!
Regards,
littleJohn

Categories

Resources