Hello world,
i need help.
i got the P7310 16 GB. my Tab is a US-refurbished unit sold in the UK.
I tried to upgrade from my stock 4.0.4. (got it via KIES for 2 months now) to CM10 (latest build, here in this forum). installed the latest cwm 5.5.0.4, I did the root, installed superuser, got the root permission. restarted. wiped cache, did the factory/data reset. installed CM10 build in cwm, than the googleapps for 4.1.2. RESTART: after the GalaxyTab 8.9 writing disappeared my screen stays black. for more than 20 minutes.
the last day i tried almost everything. wiped dalvik cache, diffrent procedures. tried different kernels (with a1 kernel 1.7.2 i got the bootscreen of CM10, but it was frozen. and i was not able to reproduce it). i also tried AOSP ROM, but it showed the same issues.
BUT: a stock based ROM from this forum based on ICS worked flawlessly
maybe it got something like a bootloader lock? well, now i got the stock 4.0.4. again (took the UK Version for P7310) and used a PIT file to repartion the whole tab and get a 100% clean installation, with root & a1 1.7.2 Kernel & cwm 5.5.0.4
What should I try next?
TroubleCame said:
Hello world,
i need help.
i got the P7310 16 GB. my Tab is a US-refurbished unit sold in the UK.
I tried to upgrade from my stock 4.0.4. (got it via KIES for 2 months now) to CM10 (latest build, here in this forum). installed the latest cwm 5.5.0.4, I did the root, installed superuser, got the root permission. restarted. wiped cache, did the factory/data reset. installed CM10 build in cwm, than the googleapps for 4.1.2. RESTART: after the GalaxyTab 8.9 writing disappeared my screen stays black. for more than 20 minutes.
the last day i tried almost everything. wiped dalvik cache, diffrent procedures. tried different kernels (with a1 kernel 1.7.2 i got the bootscreen of CM10, but it was frozen. and i was not able to reproduce it). i also tried AOSP ROM, but it showed the same issues.
BUT: a stock based ROM from this forum based on ICS worked flawlessly
maybe it got something like a bootloader lock? well, now i got the stock 4.0.4. again (took the UK Version for P7310) and used a PIT file to repartion the whole tab and get a 100% clean installation, with root & a1 1.7.2 Kernel & cwm 5.5.0.4
What should I try next?
Click to expand...
Click to collapse
Try it to install with cwm 6.0.0.8
http://www.mediafire.com/?b2pbv065k51zqy6
Install this recovery in the cwm 5.5.0.4 and after that go to advanced---> reboot recovery and install the rom with the new cwm 6.0.0.8
Related
Hi I have WEUI v1.0 installed on Galaxy I9000 with the baseband i9000XXJVT
I am planning to install the [ROM][4.1.1] [1.0.1] RemICS-JB (Team RemICS)
Is there any special way or just the regular way of putting in the SD card and then going into CWM and flashing it.
Please advise on this thanks
I did this just last night, from an I9000XXJVU baseband.
Installing was a bit of an issue for me, from recovery i had to wipe user data, cache and dalvik then flash the rom, as the instructions say, then it wouldnt boot. Went back into recovery and wiped the user data, cache and dalvik again and then the phone booted and ran the RemICS-JB 4.1.1 [1.0.1]. Once it was running it all worked fine EXCEPT i had no cellular network connection at all, after leaving the phone on for over an hour.
I didnt get a chance to verify if the wifi worked as i didnt have any access points available.
Good luck amd hope all goes well for you
From GB its important, to flash Rom after all wipes and reboot recovery ... then you get the right cmw .. and then flash again
the JB-Rom ...
It´s the same way like form GB to ICS ... flash and reboot recovery ... without reboot recovery you can`t boot
hope it works ..
Alright so here's what i have done
I first flashed to [ROM]MIUI.4.I9000 it actually turned off the recovery. Then installed the recovery app from playstore.
Then flashed the CM 10 and before flashing it automatically installed recovery V5 on phone.
Then I flashed the REMICS and this installed recovery V6 on phone.
I have to say this is the best ROM i have ever seen the speed is awesome and very nice features on the JB.
There's one thing I have noticed some of the graphics animations are not working as I have seen on the other JB phones.
However still this ROM is brilliant and I am planning to get a tab running with JB.
Thanks for your inputs on this.
I installed CM 10 stable and Semaphore Kernel. Worked great. Then went to install gapps and got lots of FC's so I went on to clean cache, dalvik and to do a factory reset and suddenly I got stuck at semaphore/boot logo and couldn't go into recovery. Got the recovery fix and installed it via Odin, and it works. But, it doesn't allow me to install anything from external SD card, only internal. Of course, I don't have anything there.
What should I do? Any links for tar versions of CWM and CM 10 for i9000?
Hmmm, is it safe to assume everything will be OK if I just flash any stock firmware from sammobile?
Yup, that combined with this did the trick.
Heey all,
Because of a release of android ICS I wanted to install a new rom. I used MIUI, and wanted to try cyanogenmod 10.1. So what I did: I downloaded the cyanogenmod, put it on the external SD. Afterwards I went into recovery mode, backed up current rom, wipe wipe data/factory reset, wipe dalvik cache. After that I tried to install the rom by selecting rom from external SD. It says update, an after a minute it says completed. So I restarted my phone, and it got stuck.
I tried some other roms, but same results. I also tried to restore backup, but somehow it didn't work, and fails. I've tried to update CWM to version 6, but that didn't resolve my problem.
So, at this point I have:
- CWM 6
- MIUI rom 2.3, 4.1
- Cyanogenmod 10.1 (nightly), 7.2
- Some more rom's, just for trying...
- A phone (LG Optimus 2x (P990)), wich only loads LG logo, and got stuck.
I hope someone could help me out!
Edit:
I can however load the MIUI 4.1 somehow, but no other rom there is I can install...
warchieflll said:
Heey all,
Because of a release of android ICS I wanted to install a new rom. I used MIUI, and wanted to try cyanogenmod 10.1. So what I did: I downloaded the cyanogenmod, put it on the external SD. Afterwards I went into recovery mode, backed up current rom, wipe wipe data/factory reset, wipe dalvik cache. After that I tried to install the rom by selecting rom from external SD. It says update, an after a minute it says completed. So I restarted my phone, and it got stuck.
I tried some other roms, but same results. I also tried to restore backup, but somehow it didn't work, and fails. I've tried to update CWM to version 6, but that didn't resolve my problem.
So, at this point I have:
- CWM 6
- MIUI rom 2.3, 4.1
- Cyanogenmod 10.1 (nightly), 7.2
- Some more rom's, just for trying...
- A phone (LG Optimus 2x (P990)), wich only loads LG logo, and got stuck.
I hope someone could help me out!
Edit:
I can however load the MIUI 4.1 somehow, but no other rom there is I can install...
Click to expand...
Click to collapse
If I understood you right, you might be still in the old bootloader....use the All In One Tool kit by Spyrosk
if you are already rooted, CWM and in ICS partition layout with unlocked bootloader....then format your system, make all the three wipes and try to flash the CM ROM again. Dont forget the gapps(ofcourse optional)
Hope that helps you my friend
I have a galaxy note n7000 international version 16gb running on jelly bean 4.1.2 ddlsc
I downloaded nightowl cm12 lollipop and flashed it via cwm which was a package of philz touch recovery and root.
I installed it via stock recovery.
When i got into philz touch cwm ddlsc it was giving me status 7 error whenever i tried to flash the rom
So i updated cwm with philz touch XXLTA kernel then it flashed in one go and it booted to cm12 rom.
It was working fine but then i switched off and switched on again it was behaving abnormally and random poweroff.
Then i went into the cwm recovery and wipe data, wipe cache
Then went into download mode and flashed the official 4.1.2 ddlsc rom but i couldnt pass the samsung logo.
Then i booted into stock recovery and wipe data and factory reset again then then device never passed the
Samsung galaxy note gt-n7000 screen,from there it turned off.
I went to samsung,they tried 4 times flashing the official rom but all they could do is
OPTIMISING APPS>STARTING APPS>FINISHING BOOT and again power off and battery appeared.
Then they said that its motherboard failure.
Then i came home,somehow managed to flash revovery by flashing speedmod jb kernel.
Then i started hg42's partition scanner from start to end i.e. from 0 to 16 and passed succesfully
So i dint run end to start or 16 to 0 becoz the first one passed successfuly.
Now i am confused if there is no emmc brick then what is the problem.
Please someone help me,i dint want spend 8000 INR or 130$/
PLEASE HELP AND GUIDE ME TO THE RESCUE. THANKS
Hello,
I had Cyanogenfortomorrow 1.4 based on CM7 on my i9000.
prepared to install mackary rom, did as the guide said... updated first to CM9 then to the rom which is based on CM11.
since then my device is stuck in recovery, I boot it and goes back to recovery even after installing several other roms and kernels.
I've searched everyone and tried all of the following from the guides..
I have tried installing:
Semaphore
i9000 boot.tar - bootloader
Gingerbread rom through Odin
CM 7 again
CM 9
CF root
I have deleted everything known
dalvik cache data wipes repartitioned even deleted EFS and installed another generic one
still booting to recovery only, the only thing changed is the type of recovery... semaphore TWRP CM.
what am I missing?
Solved
Installed stock JVU rom using odin + repartition
then used CF root kernel