Database Develop

(Solved) Lg Optimus 2x P990 Dead After trying to flash to stock rom

Solved !
my phone is p990 with v 20 indonesia, first i flash to ICS LEAK , Everythings work fine when use ics , but when in ICS it said my phone is LGSU660
then after few days i planned to get back to stock rom , i used smartflash and download stock rom from this http://forum.xda-developers.com/showthread.php?t=1035041
when it started to flash everything work fine and
00:00.0 Sec Download Start...
00:02.1 Sec :RomBinary Download start
00:02.3 Sec SI RAM writing start
00:02.3 Sec :Trying to communicate with IFX modem
00:07.4 Sec :Confirm IFX communication
00:07.4 Sec SI RAM writing end
00:07.4 Sec :Start PSI RAM
00:07.4 Sec :EBL writing start
00:26.9 Sec :Start EBL
00:27.0 Sec :Set capabilities to be used
00:27.2 Sec :Baudrate Change: 115200bps ===> 3000000bps
00:27.2 Sec :Set flash ID complete
00:27.8 Sec :Set Infineon CFI Information 1
00:27.9 Sec :Set Infineon CFI Information 2
00:27.9 Sec SI Download start
00:28.2 Sec :Set FLASH address
00:29.5 Sec SI Download success
00:29.5 Sec :SLB Download start
00:29.8 Sec :Set FLASH address
00:33.4 Sec :SLB Download success
00:33.4 Sec :Aeneas Download start
00:34.2 Sec :Erase was executed rightly!
00:34.6 Sec :Set FLASH address
00:40.8 Sec :Aeneas Download success
00:40.8 Sec :Code Download start
00:41.3 Sec :Erase was executed rightly!
00:41.7 Sec :Set FLASH address
02:54.7 Sec :Code Download success
02:54.8 Sec :Num of partitions are 7
03:03.5 Sec :TIMEOUT
ERROR
Click to expand...
Click to collapse
and then suddenly the phone totally dead
help
holding key - do nothing

how did you solved problem?

mateuszjp said:
how did you solved problem?
Click to expand...
Click to collapse
i used nvflash.
Download this h t t p://loadbalancing. modaco.com/ download.php?url=mf/?cdgwwgkdozht8pw driver
and this h t t p : / / loadbalancing. modaco.com/ download.php?url=mf/?vmu8sh0832oaac8 rom
Turn device off, remove battery, plug device in while holding volume up and down - screen will stay black but Windows will add a new 'APX' devices
Install drivers extracted from driver file download
Run 'flash.bat' from ROM file download
Wait for flash to complete and device to reboot
sorry remove the space

problem during flash V28G with SmartFlash

I have tried flash v28g with SmartFlash, but I get this error
Code:
00:00.0 Sec :Download Start...
00:02.0 Sec :RomBinary Download start
00:02.0 Sec :PSI RAM writing start
00:02.0 Sec :Trying to communicate with IFX modem
00:07.2 Sec :Confirm IFX communication
00:07.2 Sec :PSI RAM writing end
00:07.2 Sec :Start PSI RAM
00:07.2 Sec :EBL writing start
00:26.7 Sec :Start EBL
00:26.8 Sec :Set capabilities to be used
00:26.9 Sec :Baudrate Change: 115200bps ===> 3000000bps
00:27.0 Sec :Set flash ID complete
00:27.6 Sec :Set Infineon CFI Information 1
00:27.7 Sec :Set Infineon CFI Information 2
00:27.7 Sec :PSI Download start
00:28.0 Sec :Set FLASH address
00:29.3 Sec :PSI Download success
00:29.3 Sec :SLB Download start
00:29.6 Sec :Set FLASH address
00:33.2 Sec :SLB Download success
00:33.2 Sec :Aeneas Download start
00:34.0 Sec :Erase was executed rightly!
00:34.4 Sec :Set FLASH address
00:40.6 Sec :Aeneas Download success
00:40.6 Sec :Code Download start
00:41.1 Sec :Erase was executed rightly!
00:41.5 Sec :Set FLASH address
02:54.5 Sec :Code Download success
02:54.6 Sec :We can't read magic number

Wrong forum. This is the Development section, your question belongs to Q&A. Just asked a moderator to move it for you.

[Q] Error flashing back to stock.

I tried to flash back the stock rom, on Django X 1.4 atm, but i get an error. I've turned the phone off, pulled the battery. Holding down the vol- button, while plugging it in. Open smartflash p990. Select the 'ROM Copy D/L' tab. Ensure 'Normal Mode' is selected. Ensure 'Erase CAL' is NOT selected.
Put the fls file in first, the bin file second. It's starts flashing. Phone turns itself off, then i get an error:
00:00.0 Sec ownload Start...
00:02.0 Sec :RomBinary Download start
00:02.1 Sec SI RAM writing start
00:02.1 Sec :Trying to communicate with IFX modem
00:07.2 Sec :Confirm IFX communication
00:07.2 Sec SI RAM writing end
00:07.2 Sec :Start PSI RAM
00:07.2 Sec :EBL writing start
00:26.7 Sec :Start EBL
00:26.8 Sec :Set capabilities to be used
00:27.0 Sec :Baudrate Change: 115200bps ===> 3000000bps
00:27.0 Sec :Set flash ID complete
00:27.6 Sec :Set Infineon CFI Information 1
00:27.7 Sec :Set Infineon CFI Information 2
00:27.7 Sec SI Download start
00:28.0 Sec :Set FLASH address
00:29.3 Sec SI Download success
00:29.3 Sec :SLB Download start
00:29.7 Sec :Set FLASH address
00:33.2 Sec :SLB Download success
00:33.2 Sec :Aeneas Download start
00:34.0 Sec :Erase was executed rightly!
00:34.4 Sec :Set FLASH address
00:40.6 Sec :Aeneas Download success
00:40.6 Sec :Code Download start
00:41.2 Sec :Erase was executed rightly!
00:41.6 Sec :Set FLASH address
02:55.0 Sec :Code Download success
02:55.0 Sec :Num of partitions are 7
03:05.0 Sec :Timeout error is occured
03:05.0 Sec :error!
Click to expand...
Click to collapse
After this i can just put the battery back in, and it restart with Django X 1.4 still on it. Dunno what's going wrong, maybe because i'm already on the new bootloader?

You can try a few things.
1. Just try again straight after the timeout error. Sometimes that works for me.
2. Flash the files one at a time.
3. Change the position of the files in the boxes (put the bin file in the first box and the fls file in the second).
One of those methods should allow you to smartflash successfully.
Sent from my LG-P990 using Tapatalk 2

[Q] phone bricked

HI,
To start with, I am French. So, I don't speak English fluently.
My LG Optimus 2x seems bricked. It was rooted. Yesterday, I tried to update my phone from Android 2.3.4 to Android 4.0.4(both official) with Smartflash. But an error occured :
00:00.0 Sec : Download Start...
00:02.0 Sec :RomBinary Download start
00:04.1 Sec SI RAM writing start
00:04.1 Sec :Trying to communicate with IFX modem
00:09.3 Sec :Confirm IFX communication
00:09.3 Sec SI RAM writing end
00:09.3 Sec :Start PSI RAM
00:09.3 Sec :EBL writing start
00:28.8 Sec :Start EBL
00:28.9 Sec :Set capabilities to be used
00:29.1 Sec :Baudrate Change: 115200bps ===> 3000000bps
00:29.1 Sec :Set flash ID complete
00:29.7 Sec :Set Infineon CFI Information 1
00:29.8 Sec :Set Infineon CFI Information 2
00:29.8 Sec SI Download start
00:30.1 Sec :Set FLASH address
00:31.5 Sec SI Download success
00:31.5 Sec :SLB Download start
00:31.8 Sec :Set FLASH address
00:35.4 Sec :SLB Download success
00:35.4 Sec :Aeneas Download start
00:36.0 Sec :Erase was executed rightly!
00:36.2 Sec :Set FLASH address
00:42.5 Sec :Aeneas Download success
00:42.5 Sec :Code Download start
00:42.8 Sec :Erase was executed rightly!
00:43.0 Sec :Set FLASH address
02:58.6 Sec :Code Download success
02:58.7 Sec :N05:51.7 Sec artition download complete.
um of partitions are 7
03:07.8 Sec artition download complete.
03:07.9 Sec artition download complete.
03:08.4 Sec artition download complete.
03:11.0 Sec artition download complete.
03:17.8 Sec artition download complete.
06:49.5 Sec :Timeout error is occured
06:49.5 Sec :error!
Click to expand...
Click to collapse
Since this moment, when I turn on my phone, it stucks at LG logo and I can't access to CWM.
I tried to fix this problem with NvFLash, but when I run the file "flash.bat", the error is :
waiting for bootloader initialize
bootloader failed NvError 0x0
command failure : bootloader download failed.
Click to expand...
Click to collapse
How can I fix this problem ?
Thank you in advance.

Try again with Smartflash. I will link you to a post I made with a few different methods to try to bypass the timeout error-
http://forum.xda-developers.com/showthread.php?p=38840748
Hopefully that will help
Sent from my LG-P990 using Tapatalk 2

Keep flashing the AP .bin file until it is flashed successfully. Change usb ports, restart íyour computer, try on other computer. It will work after many tries
Sent from my LG-P990 using xda app-developers app

Thank you very much !
It was the .bin file that generated the error. I tried several times and now it works. It's a strange way.

Help please

hi guys i am trying to flash stock ics V30b using smartflash then i got timeout error after this
00:02.0 Sec :RomBinary Download start
00:0200:00.0 Sec ownload Start...
.0 Sec SI RAM writing start
00:02.0 Sec :Trying to communicate with IFX modem
00:07.2 Sec :Confirm IFX communication
00:07.2 Sec SI RAM writing end
00:07.2 Sec :Start PSI RAM
00:07.2 Sec :EBL writing start
00:26.7 Sec :Start EBL
00:26.8 Sec :Set capabilities to be used
00:27.0 Sec :Baudrate Change: 115200bps ===> 3000000bps
00:27.0 Sec :Set flash ID complete
00:27.6 Sec :Set Infineon CFI Information 1
00:27.7 Sec :Set Infineon CFI Information 2
00:27.7 Sec SI Download start
00:28.0 Sec :Set FLASH address
00:29.4 Sec SI Download success
00:29.4 Sec :SLB Download start
00:29.7 Sec :Set FLASH address
00:33.3 Sec :SLB Download success
00:33.3 Sec :Aeneas Download start
00:34.1 Sec :Erase was executed rightly!
00:34.5 Sec :Set FLASH address
00:40.7 Sec :Aeneas Download success
00:40.7 Sec :Code Download start
00:41.3 Sec :Erase was executed rightly!
00:41.7 Sec :Set FLASH address
02:56.0 Sec :Code Download success
02:56.0 Sec :Num of partitions are 7
03:06.2 Sec :Timeout error is occured
03:06.2 Sec :error!
i also tried to run in compatibillty mod still no luck
anyone can help me THANNKS

are you connecting your phone directly to motherboard's usb? if not, try it.
you should also try to change the order of baseband and rom in smart flash (I mean the files), that can also help.
Sent from my LG-P990 using xda premium

Thanks i changed the order of files and flashed
anyone close this theard

Glad it worked.