Hello guys.
Which kernel do you suggest to me to use with GingerDX v029? nAa kernel or Alfs kernel?
Thank you.
Vectoryzed said:
Hello guys.
Which kernel do you suggest to me to use with GingerDX v029? nAa kernel or Alfs kernel?
Thank you.
Click to expand...
Click to collapse
try them both and then decide
If I switch the kernel when the ROM is installed on my device, will I lose all my data?
Vectoryzed said:
If I switch the kernel when the ROM is installed on my device, will I lose all my data?
Click to expand...
Click to collapse
nope :good:
Hey, I have a problem flashing the nAa 14 kernel.
I have a nAa JB with the miniCM10 now.
I shutted down the device and flashed the kernel but when I turn off the X8, at the nAa homescreen, the led becomes yellow, purple and red and I cannot go into the recovery. The Xperia continues to reboot itself and doing the same thing all the time.
What should I do?
Vectoryzed said:
Hey, I have a problem flashing the nAa 14 kernel.
I have a nAa JB with the miniCM10 now.
I shutted down the device and flashed the kernel but when I turn off the X8, at the nAa homescreen, the led becomes yellow, purple and red and I cannot go into the recovery. The Xperia continues to reboot itself and doing the same thing all the time.
What should I do?
Click to expand...
Click to collapse
Install nAa JB karnel again then go in to recovery full format everyting then flash nAa 14 karnel and it should work.
i am using Gingerdx v29 with nAa 14 kernel and my usb storage is not working unless i access it through clockwork mod. somebody know what's wrong with my x8? thank you
For GDX, use alfs kernel.
I tried it myself and its totally bugfreeg
Related
Sometimes when the screen is off and i would like to turn on, and i press the middle button, but the screen doesn't appears. I need to pick out the battery, and put it back.
Sometimes when i rebooting, my phone is freeze, the screen is black, and don't happen anything. Again i need to pick out the battery and put it back.
Why?
I used MiniCM 2.1.6, GingerXperiaRay v003 and i had this problem with these roms. I think this is kernel problem.
Thanks for your answer and sorry for my bad english.
The best rom for me is gingerdx v22+alfs kernel v6.Also i haved this rom and i have the same problem and i flashed gingerdx v22 and didn't have of none problems.Sorry for my bad englisch.I am Poland.
trie to restore your x8 back to stock with seus than flash again nAa and your favorite rom.
i have the same problem and it sloved after i do that
safix8 said:
trie to restore your x8 back to stock with seus than flash again nAa and your favorite rom.
i have the same problem and it sloved after i do that
Click to expand...
Click to collapse
i restore my x8 with seus before every rom change
przemek4113 said:
The best rom for me is gingerdx v22+alfs kernel v6.Also i haved this rom and i have the same problem and i flashed gingerdx v22 and didn't have of none problems.Sorry for my bad englisch.I am Poland.
Click to expand...
Click to collapse
yes i like alfs kernel and gingerdx & gingerxperia, but gingerxperiaray is the best for me but i have this problems
That's weird... have you tried pressing the lock/ power on/off button? Never heard about this problam before. IMO I would change kernel and rom to gingerdx v022 and alfs kernel v06 uncapped
Sent from my X8 using XDA App
proN1low said:
Sometimes when the screen is off and i would like to turn on, and i press the middle button, but the screen doesn't appears. I need to pick out the battery, and put it back.
Sometimes when i rebooting, my phone is freeze, the screen is black, and don't happen anything. Again i need to pick out the battery and put it back.
Why?
I used MiniCM 2.1.6, GingerXperiaRay v003 and i had this problem with these roms. I think this is kernel problem.
Thanks for your answer and sorry for my bad english.
Click to expand...
Click to collapse
Ya, it was the problem with the kernel version 08b
but now version 09 has been released...and the issue has been fixed i myself using it...
wilbso said:
That's weird... have you tried pressing the lock/ power on/off button? Never heard about this problam before. IMO I would change kernel and rom to gingerdx v022 and alfs kernel v06 uncapped
Sent from my X8 using XDA App
Click to expand...
Click to collapse
yes i tried
safix8 said:
trie to restore your x8 back to stock with seus than flash again nAa and your favorite rom.
i have the same problem and it sloved after i do that
Click to expand...
Click to collapse
hi i followed your post but i does'nt work for me and
it bootloops, sometimes it stuck at nAa kernel logo.
this couple week,, i hv this problem..
its never happen b4..
idk why its happen..
my kernel is nAa 11
proN1low said:
I used MiniCM 2.1.6, GingerXperiaRay v003 and i had this problem with these roms. I think this is kernel problem.
Click to expand...
Click to collapse
I believe MiniCM7 2.1.9 is out, alongside nAa 11 kernel. The ROM has been thoroughly used by the community and most issues thrashed out. That's asides being a vast improvement over MiniCM7 2.1.6
I suggest you upgrade.
HELLO GUYS
can any one tell me how to get vibration in naa kernel
i read the thread but it said that if you want vibration you need to use gb implementation...
but i didnt understand what it meant
so can anyone please tell me that how can i get vibration in the naa karnel
thanks
what rom do you have?
try CM 2.1.8 by nAa and nAa v10 kernel.
post here the result
pesky_89 said:
what rom do you have?
try CM 2.1.8 by nAa and nAa v10 kernel.
post here the result
Click to expand...
Click to collapse
btw i have GDX v22 and naa kernel v10
and get no vibration
pesky_89 said:
what rom do you have?
try CM 2.1.8 by nAa and nAa v10 kernel.
post here the result
Click to expand...
Click to collapse
==>setting==> call==>sound ==> Vibrate==> Always
harshitgroup said:
btw i have GDX v22 and naa kernel v10
and get no vibration
Click to expand...
Click to collapse
dude gdx is for stock/alfs/linuxdx kernels. flash another kernel or another rom that are compatible (minicm 2.1.8 by nAa and nAa kernel).
I just want to know that how can I flash nAa kernel on my x8,
m on stock kernel with froyo pro ROM. do i need any other ROM to flash it or i can simply flash it...!!!
vicky6672 said:
I just want to know that how can I flash nAa kernel on my x8,
m on stock kernel with froyo pro ROM. do i need any other ROM to flash it or i can simply flash it...!!!
Click to expand...
Click to collapse
hello vicky
in order to flash kernels you need to unlock your bootloader....
You may search the forum for unlocking the bootloader.
But keep extra caution in the process of unlocking bootloader because you may brick your phone.
Press thanks if I helped.....
harshitgroup said:
hello vicky
in order to flash kernels you need to unlock your bootloader....
You may search the forum for unlocking the bootloader.
But keep extra caution in the process of unlocking bootloader because you may brick your phone.
Press thanks if I helped.....
Click to expand...
Click to collapse
I have unlocked my bootloader, i just want to know that can I flash kernel with any rom installed, I have Froyopro, so can i flash nAa kernel, I am in stock kernek now
Froyopro propably won't start on nAa kernel and it will stop after boot animation/kernel animation. You should try miniCM7 (and based on it ROMs) versions 2.1.8 and 2.1.9 for kernels nAa 10 and 11. If You would like older versions of MiniCM on kernels nAa 10 and 11 You will have to install also new graphic drivers (in CWM), cause without them performance will be very low. nAa 09 suits MiniCM7 ROMs f.e. 2.1.6 and 2.1.7. So there's a plenty of options
Bolussimo said:
Froyopro propably won't start on nAa kernel and it will stop after boot animation/kernel animation. You should try miniCM7 (and based on it ROMs) versions 2.1.8 and 2.1.9 for kernels nAa 10 and 11. If You would like older versions of MiniCM on kernels nAa 10 and 11 You will have to install also new graphic drivers (in CWM), cause without them performance will be very low. nAa 09 suits MiniCM7 ROMs f.e. 2.1.6 and 2.1.7. So there's a plenty of options
Click to expand...
Click to collapse
But can i install MiniCM without nAa kernel, MinICM 7 requires nAa kernel..m confused now. do first i need to flash kernel or minicm 7,
vicky6672 said:
But can i install MiniCM without nAa kernel, MinICM 7 requires nAa kernel..m confused now. do first i need to flash kernel or minicm 7,
Click to expand...
Click to collapse
If you want to install MiniCM7, you need aNa kernel. unlocked bootloader=> flash aNa kernel=> install Roms!
Check the date of manufacturing first before unlocked bootloader, otherwise, it may break your phone!
As You can see at MiniCM's google page: http://code.google.com/p/minicm/ versions 6 supports stock SE kernel. If You want miniCM7 - it's neccesary to flash nAa kernel.
1). Download ROM and copy it on SD.
2). Flash nAa kernel.
3). Go into CWM recovery, which is built-in in nAa kernel and do full wipe.
4). In CWM Install custom.zip from SD card
If You install CWM7 without nAa kernel propably it won't start at all. And propably You will have to use SEUS to back to stock SE ROM, cause I think there will be no option to get into recovery
how to install nAa kernel on x8?
now i use linuxDx.
when i flash nAa rom using xrecovery, its stuck at ''sony ericsson''
sorry for bad english
thanks for the help
My Xperia X8 using wp7 UI , Walkman player and beats audio!!
irfaniskandar said:
how to install nAa kernel on x8?
now i use linuxDx.
when i flash nAa rom using xrecovery, its stuck at ''sony ericsson''
sorry for bad english
thanks for the help
My Xperia X8 using wp7 UI , Walkman player and beats audio!!
Click to expand...
Click to collapse
Check the topmost sticky in the "Development section".
Or try the direct link: forum.xda-developers.com/showthread.php?t=986697
how to install nAa kernel on x8?
now i use linuxDx.
when i flash nAa rom using xrecovery, its stuck at ''sony ericsson''
sorry for bad english
thanks for the help
Dude, with nAa rom's you almost always need nAa kernel, because the wi-fi it won't work, it's built on the kernel and not in the rom.
In every nAa rom you'll see the link to nAa kernel. It's just flash it like you did with linuxDx. Here you have the link http://forum.xda-developers.com/showthread.php?t=1350484
Hit the thanks if I helped
Btw, sorry for the bad english
Before you flash any ROM , doesn't matter which one , make sure u Full Wipe Data + Cache Partition in CWM/xRecovery.
Press Thanks if my answer helped you
irfaniskandar said:
how to install nAa kernel on x8?
now i use linuxDx.
when i flash nAa rom using xrecovery, its stuck at ''sony ericsson''
sorry for bad english
thanks for the help
My Xperia X8 using wp7 UI , Walkman player and beats audio!!
Click to expand...
Click to collapse
Flash nAa using Flashtool instead.
<captain_obvious>
Well, you need the nAa kernel to make the nAa ROM work. And, isn't MiniCM installed with CWM recovery, not xRecovery?
</captain_obvious>
Hi all,
yesterday I rooted and unlocked bootloader of my x8. The I flashed nAa kernel for MiniCM7 (E15_nAa-14_2.6.29.6-nAa-14.ftf) with flashtool. When I rebooted it, it doesn't show anything: the screen is black and nAa logo doesn't appear.
I tried also nAa kernel for MiniCM9 and for MiniCM10, but the issue persist.
With Alfs kernel I have not problem. Now I'm on GingerDX, but I would try MiniCM
Please help me
be sure you have memory card on naa kernel....so it will boot up
minimum edition
Make sure your battery is over 15-20% and check your SD Card if it's inserted correctly.
Sent from my E15i using Tapatalk 2
I also just happened to be from the fact that I have uploaded so badly damaged kernel because the kernel pulled badly
You have right!!! with sd it works very well. Thank you
d728370 said:
Hi all,
yesterday I rooted and unlocked bootloader of my x8. The I flashed nAa kernel for MiniCM7 (E15_nAa-14_2.6.29.6-nAa-14.ftf) with flashtool. When I rebooted it, it doesn't show anything: the screen is black and nAa logo doesn't appear.
I tried also nAa kernel for MiniCM9 and for MiniCM10, but the issue persist.
With Alfs kernel I have not problem. Now I'm on GingerDX, but I would try MiniCM
Please help me
Click to expand...
Click to collapse
should be more closely at his friend for how to install that does not happen any unwanted