Related
Tried everything I could with Odin and phone still stuck in a start loop.
I was downgrading from checkROM to official firmware ZSLA2 with CWM (I wanted to keep ROOT, so I selected "Keep CF-Root kernel") due to stability issues, after restarting the phone got into the start loop.
I flashed with Odin official ZSLA2 with the same result (looped start). I flashed XXKKA (again looped start). During the flashing process, Odin says the flashing was successful. By the way, both ROMS are tar.md5 files.
I tried to remove the battery for over 30 minutes and charge it for 2 hours, tried re-partition in Odin (it's my understanding that with a stock rom, it creates a clean installation), but Odin fails to start the process.
What else can I do?
I am sorry if this has previously asked, but I've been searching for over 2 hours and nothing similar came. Somebody mentioned to use a PIT file in addition, but the other person who got his phone soft bricked didn't solve the problem either. As downloading a ROM is time consuming and I've got many problems with upload sites in china (cannot access to most of them), I would thank any help in regards this issue.
Sounds like your kernel isn't talking properly to your ROM.
A fresh start is your best bet. Flash a stock rom and kernel from Odin and reroot it with CF-Root.
What files are you putting into Odin? There should be a total of 4.
I'd also avoid the use of a .pit file. I haven't even seen the mention of one in all my time on the Note forum. I really don't think Samsung uses them the way they used to. (I used to have to flash one all the time when testing roms on the original galaxy tab.)
I am using official ROM N7000ZSLA2_N7000ZSLA2_N7000XLA4_HOME.tar.md5 into PDA and also tried ROM N7000XXKKA_N7000XEUKK3_N7000XXKK5_HOME.tar.md5, which I used successfully in the past to make root into my phone.
Does it really make a difference to flash 4 separate files instead of a full pack? Where can I find an official ROM with pda radio and kernel separated? Just untar the ROM?
btyork said:
I'd also avoid the use of a .pit file. I haven't even seen the mention of one in all my time on the Note forum. I really don't think Samsung uses them the way they used to. (I used to have to flash one all the time when testing roms on the original galaxy tab.)
Click to expand...
Click to collapse
Oh, they do come into the Note; I flashed the Beta ICS, and one of the things they mention is to use the PIT file for the 16GB version, instead of the 32GB that comes with the leaked ROM. Unfortunately I deleted that ROM, and donwloading it is painfully slow and also wouldn't necessarily solve my problem as I couldn't even make a phone call.
True - the .pit file can change the size of the partition data... But that's not your problem. If the .pit file was the problem - you'd boot, but have 0 storage space (or something else wonky pertaining to your disk size.)
Open the tar up and make sure it has all the files in it. Should be 5.
I've attached a screenshot of the 5 file names. Make sure they are all in the .tar you are flashing.
Even i had similar problem after flashing Stock ROM using Odin (PC). Only thing i did is just rebooted in recovery and Wipe/factory Reset and Wipe cache. everything went fine.
btyork said:
True - the .pit file can change the size of the partition data... But that's not your problem. If the .pit file was the problem - you'd boot, but have 0 storage space (or something else wonky pertaining to your disk size.)
Open the tar up and make sure it has all the files in it. Should be 5.
I've attached a screenshot of the 5 file names. Make sure they are all in the .tar you are flashing.
Click to expand...
Click to collapse
This are the files I am flashing:
Sorry, I am new user and still cannot post screen captures. I do have more than the 5 files.
In XXKKA I have:
Boot
Cache
Factoryfs
Hidden
Modem
param.lfs
Sbl
zImage
In ZSLA2:
Cache
Factoryfs
Hidden
Modem
zImage
btyork said:
Even i had similar problem after flashing Stock ROM using Odin (PC). Only thing i did is just rebooted in recovery and Wipe/factory Reset and Wipe cache. everything went fine.
Click to expand...
Click to collapse
I can only enter into Download mode, not recovery mode.
Odin is full wipe, right? What the hell am I doing wrong?
N7000xxla1_n7000oxala1_oxa
http://hotfile.com/dl/141060546/b0c7420/N7000XXLA1_N7000OXALA1_OXA.rar.html
download this firmware, it's gonna take awhile but worth a try..
try flashing this rom using PC odin.
pit: Q1_20110914_16GB.pit
pda: CODE_N7000XXLA1_CL868264_REV02_user_low_ship.tar.md5
phone: MODEM_N7000XXLA1_REV_05_CL1093393.tar.md5
csc: GT-N7000-MULTI-CSC-OXALA1.tar.md5
check re-partition, auto reboot, F. reset time.
let me know if it works!
Han
choihan06 said:
download this firmware, it's gonna take awhile but worth a try..
try flashing this rom using PC odin.
pit: Q1_20110914_16GB.pit
pda: CODE_N7000XXLA1_CL868264_REV02_user_low_ship.tar.md5
phone: MODEM_N7000XXLA1_REV_05_CL1093393.tar.md5
csc: GT-N7000-MULTI-CSC-OXALA1.tar.md5
check re-partition, auto reboot, F. reset time.
let me know if it works!
Han
Click to expand...
Click to collapse
Well, I finally managed to get my phone back. I was getting a lot of corrupted ROMS. I couldn't download your ROM as well; I managed to install the Beta ICS 4.0.3 which comes with a PIT for repartition, as I think the problem was that my booting partition was screwed.
Problem now is: that rom screws the phone and the keyboard, but at least I have my phone back.
Thank you
mrfan said:
Well, I finally managed to get my phone back. I was getting a lot of corrupted ROMS. I couldn't download your ROM as well; I managed to install the Beta ICS 4.0.3 which comes with a PIT for repartition, as I think the problem was that my booting partition was screwed.
Problem now is: that rom screws the phone and the keyboard, but at least I have my phone back.
Thank you
Click to expand...
Click to collapse
I have just recently dowloaded and installed the rom without problem. What do you mean by corrupted rom?
Sent from my GT-N7000 using xda premium
I too bricked my phone but after reading this guide (ABD wouldn't recognise my device so I couldn't follow it) I understood the partitions had become messed up.
I read somewhere about the PIT files.
I ODINed the ABYSS Kernal and PIT (Q1_20110914_16GB-patched) for my 16gb n7000 ticked the repartition box. It booted into CWM recovery and I used the restore and bingo.
Fix The problem
I had the same problem, the device got into start loop. JUST DO A FULL WIPE..! and the device should start normally. I worked for me.... :good:
Sent from my GT-N7000 using xda premium[/QUOTE]
Hello guys!
My friend gave his Galaxy Note for me to get a brick fix. He said that he flashed the German ICS STOCK ROM and wiped using CWM. He said that he entered in a bootloop. Then he tried to flash using ODIN, but it stopped at factoryfs, as known at the eMMC bug. In the bug, he disconnected the USB cable and he is seeing a message which says to connect to Kies and select recovery. But he said that didn't worked and Kies didn't recognized the phone. Even with ODIN, loaded with PIT and PDA, the phone wasn't able to receive factoryfs, the same file from the 1st error. I followed a lot of tutorials here on XDA and used the search to find a similar thread. He needs help, since recovery mode, charging mode and normal mode are blocked by the message. I need a ROM which contains the PDA, the CSC and the MODEM files. I already have the PIT, so I need those 3 files to try again.
--PHONE DETAILS--
Samsung Galaxy Note N7000
16GB Storage
LAST Firmware completelly flashed: XXLRQ (I think that is the firmware which you can't wipe)
ICS Stock
Thanks!
EDIT: I tried with another GB firmware and with an ICS firmware. Still NOT WORKING.
EDIT #2: The phone still have Download mode open!
BIGGEST EDIT:
All of the methods in this thread are NOT WORKING. Still stops at factoryfs and CWM says "Installation Aborted". SO, WHAT I CAN DO? He is desperated, I'm desperated. PLEASE ANSWER FAST !!
Mr.Indigo said:
Hello guys!
My friend gave his Galaxy Note for me to get a brick fix. He said that he flashed the German ICS STOCK ROM and wiped using CWM. He said that he entered in a bootloop. Then he tried to flash using ODIN, but it stopped at factoryfs, as known at the eMMC bug. In the bug, he disconnected the USB cable and he is seeing a message which says to connect to Kies and select recovery. But he said that didn't worked and Kies didn't recognized the phone. Even with ODIN, loaded with PIT and PDA, the phone wasn't able to receive factoryfs, the same file from the 1st error. I followed a lot of tutorials here on XDA and used the search to find a similar thread. He needs help, since recovery mode, charging mode and normal mode are blocked by the message. I need a ROM which contains the PDA, the CSC and the MODEM files. I already have the PIT, so I need those 3 files to try again.
--PHONE DETAILS--
Samsung Galaxy Note N7000
16GB Storage
LAST Firmware completelly flashed: XXLRQ (I think that is the firmware which you can't wipe)
ICS Stock
Thanks!
EDIT: I tried with another GB firmware and with an ICS firmware. Still NOT WORKING.
Click to expand...
Click to collapse
He did successfully bricked his devices.. If you are not able to enter into download mode you have a paperweight in your hands... If he has warranty try to get it replaced.. If he doesn't then try the pit file method on the general forum..
You don't need any 3 files.. It's the same or at least the effect its the same with 1 or 3 files
Tapatalking on my n7000
msedek said:
He did successfully bricked his devices.. If you are not able to enter into download mode you have a paperweight in your hands... If he has warranty try to get it replaced.. If he doesn't then try the pit file method on the general forum..
You don't need any 3 files.. It's the same or at least the effect its the same with 1 or 3 files
Tapatalking on my n7000
Click to expand...
Click to collapse
He is able to enter into DL mode. Even PIT doesn't work.
Mr.Indigo said:
He is able to enter into DL mode. Even PIT doesn't work.
Click to expand...
Click to collapse
Well then your only option its the warranty or pay samsung either for a new phone or a mother board replacement...
That pit file method its only a partial solution to help you get your device partially working maybe a couple of months.. When the emmc bug happens it does damage the Emmc chip so the hardware its fried and there's no software that can repair it..
The pit method could work for someone but not for others.. Depends on the damage
Tapatalking on my n7000
Here I think you may find a solution for your problem.
If you think you need to flash the 3 files with odin try flashing an old GB ROM, you can find it here, some (NOT ALL) of the ROM in this post has PDA, CSC and PHONE part.
Good luck!
andreaonelove said:
Here I think you may find a solution for your problem.
If you think you need to flash the 3 files with odin try flashing an old GB ROM, you can find it here, some (NOT ALL) of the ROM in this post has PDA, CSC and PHONE part.
Good luck!
Click to expand...
Click to collapse
I tried it, but didn't work. This solution is too much dangerous?
andreaonelove said:
Here I think you may find a solution for your problem.
If you think you need to flash the 3 files with odin try flashing an old GB ROM, you can find it here, some (NOT ALL) of the ROM in this post has PDA, CSC and PHONE part.
Good luck!
Click to expand...
Click to collapse
It's doesn't matter if it's 1 or 3 files.. The pit file just repartition the emmc in order to reacomodate the memory and so you can flash the rom.. Flashing separately phone csc and PDA won't make any difference..
Tapatalking on my n7000
Have you tryed to flash a GB ROM with three files?
And the solution proposed here?
andreaonelove said:
Have you tryed to flash a GB ROM with three files?
And the solution proposed here?
Click to expand...
Click to collapse
Mr.Indigo said:
Hello guys!
My friend gave his Galaxy Note for me to get a brick fix. He said that he flashed the German ICS STOCK ROM and wiped using CWM. He said that he entered in a bootloop. Then he tried to flash using ODIN, but it stopped at factoryfs, as known at the eMMC bug. In the bug, he disconnected the USB cable and he is seeing a message which says to connect to Kies and select recovery. But he said that didn't worked and Kies didn't recognized the phone. Even with ODIN, loaded with PIT and PDA, the phone wasn't able to receive factoryfs, the same file from the 1st error. I followed a lot of tutorials here on XDA and used the search to find a similar thread. He needs help, since recovery mode, charging mode and normal mode are blocked by the message. I need a ROM which contains the PDA, the CSC and the MODEM files. I already have the PIT, so I need those 3 files to try again.
--PHONE DETAILS--
Samsung Galaxy Note N7000
16GB Storage
LAST Firmware completelly flashed: XXLRQ (I think that is the firmware which you can't wipe)
ICS Stock
Thanks!
EDIT: I tried with another GB firmware and with an ICS firmware. Still NOT WORKING.
EDIT #2: The phone still have Download mode open!
Click to expand...
Click to collapse
I have the same problem!!!
I'm desperated, since it's my main phone!
I will try the last solutions!!!
andreaonelove said:
Have you tryed to flash a GB ROM with three files?
And the solution proposed here?
Click to expand...
Click to collapse
That's what I need.... I didn't found the 3 files. I will try!
andreaonelove said:
Have you tryed to flash a GB ROM with three files?
And the solution proposed here?
Click to expand...
Click to collapse
This solution is based on a GB kernel. I'm in the same situation as Mr.Indigo, with the same ROM and the same problems. I need to use CM9 kernel to use with ICS, right? Or I can use GB kernel?
Aldenucci said:
This solution is based on a GB kernel. I'm in the same situation as Mr.Indigo, with the same ROM and the same problems. I need to use CM9 kernel to use with ICS, right? Or I can use GB kernel?
Click to expand...
Click to collapse
IDK, you must do it at your own risk.
andreaonelove said:
Here I think you may find a solution for your problem.
If you think you need to flash the 3 files with odin try flashing an old GB ROM, you can find it here, some (NOT ALL) of the ROM in this post has PDA, CSC and PHONE part.
Good luck!
Click to expand...
Click to collapse
I tried this solution. The cellphone starts to make strange noises and a lot of characters entered in ADB command. Any other solution??
Mr.Indigo said:
I tried this solution. The cellphone starts to make strange noises and a lot of characters entered in ADB command. Any other solution??
Click to expand...
Click to collapse
Yeah already told you.. Walk to the nearest samsung center and claim the warranty or pay for a replacement
Tapatalking on my n7000
unfortunately sound like a brick to me. failed flashing via pc odin and stuck at factoryfs has something to do with your root. so i heard.. the best way is to send it to SSC for repair while you still have the warranty
msedek said:
Yeah already told you.. Walk to the nearest samsung center and claim the warranty or pay for a replacement
Tapatalking on my n7000
Click to expand...
Click to collapse
He didn't have warranty. I'm trying to flash any PIT which owns factoryfs. He said that fails to wipe into some minutes and I have 88 factoryfs PITs. So I have to flash ALL of them to know. BTW I can flash a kernel using ODIN!
mistajoe83 said:
unfortunately sound like a brick to me. failed flashing via pc odin and stuck at factoryfs has something to do with your root. so i heard.. the best way is to send it to SSC for repair while you still have the warranty
Click to expand...
Click to collapse
My problem is SOLVED!
I found 88 PITs, whick it was intended for factoryfs. I tried the first ten PITs, and the 7th WORKED!
It was 17xx MB. Now the phone is working! THANKS FOR ALL OF YOUR GUYS HELP!
Hi
I'm looking for root & cwm for this device. specially cwm recovery or another kernal/recovery that can install zip files.
there is something like that?
thanks a lot.
avicohh said:
Hi
I'm looking for root & cwm for this device. specially cwm recovery or another kernal/recovery that can install zip files.
there is something like that?
thanks a lot.
Click to expand...
Click to collapse
someone managed to do the root?
nixonik said:
someone managed to do the root?
Click to expand...
Click to collapse
managed some soft bricks in how not to root. Odin up & waiting if a dev comes up with it
I am also waiting for the root!
not sure if it would work, but im working on a rom right now that is pre-rooted, but like i said i dont think that it will work,, i hope someone makes a cwm recovery soon
I'm currently trying to create a prerooted rom the way I did it for my tablet.
Extracting the system image from the Update package was easy, currently I'm trying to mount the syste,.img to set the rights and add the SU binaries.
If this works out, how can I flash this ROM?
With KIES? Or Update.zip on SD?
Is there an Update mode, and how can I get there?
edit: Okay... I was able to mount the System.img, but this is not that straight forward as in the img of my tablet.
I found a lot of folders, but no .apk, known folder or something I could work with.
softbricked
gummygum said:
managed some soft bricks in how not to root. Odin up & waiting if a dev comes up with it
Click to expand...
Click to collapse
Have you tried adb shell?. I am not allowed to post outside links, but if you type "londatiga net/it/how-to-use-android-adb-command-line-tool/" in Google, you will get the appropiate link
Could you explain with some derail how did you unbricked the phone?
Thanks a lot
teddybt said:
I'm currently trying to create a prerooted rom the way I did it for my tablet.
Extracting the system image from the Update package was easy, currently I'm trying to mount the syste,.img to set the rights and add the SU binaries.
If this works out, how can I flash this ROM?
With KIES? Or Update.zip on SD?
Is there an Update mode, and how can I get there?
edit: Okay... I was able to mount the System.img, but this is not that straight forward as in the img of my tablet.
I found a lot of folders, but no .apk, known folder or something I could work with.
Click to expand...
Click to collapse
ou should of just setup android kitchen and put the boot.img and system.img in there and it extracts them, plus you can pre-root it aswell
I have posted here for help!
Hi guys, I'm pretty new here.
I was wondering if there is any official 4.1.1 Jellybean for SIII Mini, 'cause my phone is pretty dead at this moment. I tried to download from official servers some packages , and use them with Odin ...but the phone is still at the main screen " Samsung Galaxy S III Mini GT-I8190 ". Any ideas how to manage with this ?
Or can I use another firmware, as 2.3.4 Gingerbread?To downgrade the device just to work?
zeek12 said:
Hi guys, I'm pretty new here.
I was wondering if there is any official 4.1.1 Jellybean for SIII Mini, 'cause my phone is pretty dead at this moment. I tried to download from official servers some packages , and use them with Odin ...but the phone is still at the main screen " Samsung Galaxy S III Mini GT-I8190 ". Any ideas how to manage with this ?
Or can I use another firmware, as 2.3.4 Gingerbread?To downgrade the device just to work?
Click to expand...
Click to collapse
Do you tried to get some of this firmwares:
samsung-updates.com/device/?id=GT-I8190
and installing with:
trickytweaks.com/i8190xxaljl-4-1-1-jelly-bean-update-gt-i8190-s3-mini-how-to.htm
Yes, I have tried with my provider's firmware , but nothing happened. Still at logo screen. I have also tried with other firmwares, but still at a dead end. Right at this moment I'm flashing my phone again, hoping that something will change.
Had it stuck by flashing custom boot.img. Solved it by flashing 1 file image from samfirmwares as pda in Odin 1.85 default settings
Sent from my GT-I8190 using xda app-developers app
I have succesfully extracted the PIT file from my S3 mini with the Heimdall software, but I don't wanna use it to flash with Odin because I think it's pretty messed up. Can anyone provide me with their Galaxy S3 Mini PIT file, hoping to rescue my dead phone ?
no boot into recovery mode and wipe data/cache that should get the phone booting again, esppecially after flashing firmwares with odin
winxuser said:
no boot into recovery mode and wipe data/cache that should get the phone booting again, esppecially after flashing firmwares with odin
Click to expand...
Click to collapse
Well, if the recovery mode can be accessed with Volume Up + Home + Power, then I can say that my S III Mini won't get into it.If I press these buttons the phone just gets on, and remains at Samsung Logo. So that is why I'm asking for a PIT file, 'cause I can't get into recovery mode to erase all data, so I can flash my phone again using Odin.
I have tried all official firmwares and still nothing. I guess my SIII Mini partitions are a little (or a little more) messed up, and I need to use Re-Partition from Odin so I can revive my phone.And to do this I need a PIT file from a working phone.
Or there is another way to get into recovery mode, excepting Volump Up + Home + Power?
Thanks for the answers.
elco27 said:
There is a solution for hte problem you have with that phone.
Check this thread for more info: h t t p://forum.gsmhosting.com/vbb/f286/i8190-galaxy-s3-mini-hang-startup-solution-1574562/#post8970902
Click to expand...
Click to collapse
Well, the NsPro tool requiers a box, that costs 170$. The program is useless without that box. I have downloaded it and doesn't work without that box.Another solution is by using a JTAG box, which does the pretty same thing, but again, it is expensive.
I was thinking that if I'll repartion my phone it will resolve the boot.img file, because it's in the "softbrick" at this moment.
helpline
Have you tried emailing or phone SAMSUNG`s helpline, they might help.
Write this image file whit odin 1.85 and voala you phone revive.
Pls use tanks buton
That param.tar file I saw it is for S II . Does it work for a S III mini too? Aren't 2 different devices?
Hi All,
I need your help with resolving my i8190N boot-loop situation.
What caused it:
I was on aokp and flashed revenge v4 over it with cwm including the modem mod listed in the thread.
I did manually format system, data & cache before and possibly after.
Symphtomps:
The white i8910N logo shows up, then disappears and the whole process repeats each few seconds.
Can't boot into recovery.
What I tried already:
Booted into odin mode
Flashed: wipe.md5, params.md5, stock recovery.md5, pre-rooted stock rom.
No change whatsoever.
Can someone help me resolving this?
I look funny on the train typing on my beloved G1 from 2009
Thanks!
Hi
Odin, instal .pit GT-I8190N file, and flash device.
Flashing ROMs on the way to work, you're brave lol. I do this sometimes lmfao.
Sent from my GT-I8190 using Tapatalk 2
vicoolpl said:
Hi
Odin, instal .pit GT-I8190N file, and flash device.
Click to expand...
Click to collapse
Thanks for the reply vicoolpl.
Can you please detail this out for me a little bit?
- Download link
- Steps for Odin dummies
I just attached two .pit zips I found. I'm unsure which one to use. The size is equivalent, but the CRC32 inside the zip is different.
Thanks for any hint.
A-Droid said:
I just attached two .pit zips I found. I'm unsure which one to use. The size is equivalent, but the CRC32 inside the zip is different.
Thanks for any hint.
Click to expand...
Click to collapse
Use the pit file that matches your phone model, which is the i8190N, dont worry if you used the wrong pit file, it will automatically fail
AssToast said:
Use the pit file that matches your phone model, which is the i8190N, dont worry if you used the wrong pit file, it will automatically fail
Click to expand...
Click to collapse
Thanks for the hint.
Unfortunately this didn't change anything either.
I did it both ways:
1. Flash the .pit first, then the ROM next
2. Flash the .pith and the ROM at the same time
Please see the attached screenshot of what I did.
Update: Just repeated the same thing on the screenshot but with re-partitioning enabled. Still no joy.
Thanks.
Use PARAM file here, see if that helps, flash as PDA in Odin.
http://forum.xda-developers.com/showthread.php?t=2159660
Sent from my GT-I8190 using Tapatalk 2
Enable 3 button combo for recovery: http://forum.xda-developers.com/showthread.php?t=2157105
Start in recovery and do a factory reset.
It finally worked out!
I installed the 3 button combo + CWM bundle + the official ROM for my carrier from Samsung-Updates.
Since then I flashed reVenge v4.0 and this time it simply worked.
Great thanks for all the replies!
hello guys, i need your help.. i have samsung galaxy note N7000 brick phone because stuck on galaxy note gt-n7000 screen. i can access download mode and no recovery. i flashed any firmware version it stuck at factoryfs.img.. i flash any kernel it says fail, i flashed pit file stuck at set partition. what should i do?? every time i flash custom binary download will count.. what should i do? please someone kindly tell me the guide to solve this problem.. :crying::crying:
mohd syafik said:
hello guys, i need your help.. i have samsung galaxy note N7000 brick phone because stuck on galaxy note gt-n7000 screen. i can access download mode and no recovery. i flashed any firmware version it stuck at factoryfs.img.. i flash any kernel it says fail, i flashed pit file stuck at set partition. what should i do?? every time i flash custom binary download will count.. what should i do? please someone kindly tell me the guide to solve this problem.. :crying::crying:
Click to expand...
Click to collapse
1) What Firmware Did You Use When This Problems Coming?Is It Stock ICS?
2)Please Give More Details About Firmware You Use...
mohd syafik said:
hello guys, i need your help.. i have samsung galaxy note N7000 brick phone because stuck on galaxy note gt-n7000 screen. i can access download mode and no recovery. i flashed any firmware version it stuck at factoryfs.img.. i flash any kernel it says fail, i flashed pit file stuck at set partition. what should i do?? every time i flash custom binary download will count.. what should i do? please someone kindly tell me the guide to solve this problem.. :crying::crying:
Click to expand...
Click to collapse
Try a Gingerbread firmware and the firmware should contain all the three files seperate. Like the code modem and pda.. and then flash it.. it will help
Hit Thanks
Sent from my GT-N7000 using xda app-developers app
NoteboyTech said:
Try a Gingerbread firmware and the firmware should contain all the three files seperate. Like the code modem and pda.. and then flash it.. it will help
Hit Thanks
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
i have try GB firmware that contains all files the result still same.. i don't know what to do
hazwan708 said:
1) What Firmware Did You Use When This Problems Coming?Is It Stock ICS?
2)Please Give More Details About Firmware You Use...
Click to expand...
Click to collapse
i use firmware JB XME from malaysia and GB firmware that contains all files pda,csc and modem still stuck at factoryfs.img..
i flash pit file 16GB stuck at set partition, i flash any safe kernel,odin shows fail...:crying::crying:
mohd syafik said:
i use firmware JB XME from malaysia and GB firmware that contains all files pda,csc and modem still stuck at factoryfs.img..
i flash pit file 16GB stuck at set partition, i flash any safe kernel,odin shows fail...:crying::crying:
Click to expand...
Click to collapse
If you stuck at factoryfs.img then you device is bricked.
Replace the motherboard
or
try the workaround (and it is only that) with the repartition method described in hg42's thread.
ThaiDai said:
If you stuck at factoryfs.img then you device is bricked.
Replace the motherboard
or
try the workaround (and it is only that) with the repartition method described in hg42's thread.
Click to expand...
Click to collapse
still same.. i flash pit file from hg42 thread stuck on set partition..
here i attaches the image
How will it move ahead? You have not selected any PDA files to flash.
And why did you flash that PIT file? Have you done any scans using the scanners found in that thread to determine the bad blocks?
ENter all the 3 files without PIT! and tell again!