I really am at a loss now.
There seems to be nothing that i am doing that is making it possible for me to get my phone rooted.
I am running 4.3 .290 on an unbranded c6903 and i have been trying for the last week to downgrade it to .534 so i can root the phone.
I have gone through the forum and have tried the recommended ways. I have downloaded all the correct ftf files. I have flashtool up to date.
I started with downgrading direct to .534 but the IMEI number just read 00000etc. I re-read the forum and saw that i should try and go to .557 before downgrading to .534. Same thing happened. No IMEI number. I then tried a different ftf file to no avail.
Today i saw someone say to use SUS but not to wipe Data. Tried it and the phone got stuck in a bootloop.
I am at a loss. I have never had a phone which was so difficult to root. I have rooted nearly all my android phones before the Z1 and i am confident with doing so.
I really like the phone and i will not be replacing it anytime soon. But has anyone got any ideas that can help me so i can get this phone rooted.
bernj175 said:
I really am at a loss now.
There seems to be nothing that i am doing that is making it possible for me to get my phone rooted.
I am running 4.3 .290 on an unbranded c6903 and i have been trying for the last week to downgrade it to .534 so i can root the phone.
I have gone through the forum and have tried the recommended ways. I have downloaded all the correct ftf files. I have flashtool up to date.
I started with downgrading direct to .534 but the IMEI number just read 00000etc. I re-read the forum and saw that i should try and go to .557 before downgrading to .534. Same thing happened. No IMEI number. I then tried a different ftf file to no avail.
Today i saw someone say to use SUS but not to wipe Data. Tried it and the phone got stuck in a bootloop.
I am at a loss. I have never had a phone which was so difficult to root. I have rooted nearly all my android phones before the Z1 and i am confident with doing so.
I really like the phone and i will not be replacing it anytime soon. But has anyone got any ideas that can help me so i can get this phone rooted.
Click to expand...
Click to collapse
To get your IMEI back you will need to update to .290 (once you get on .290 firmware your IMEI should reappear).Then you can either go through .257 to .534 or you can use a special .534 ftf made by [NUT] where no IMEI loss occurs. You can use my guide to guide you through the process:
Jumping directly to .534 it will lost IMEI. You can't or you use one posted by NUT.
shem2409 said:
To get your IMEI back you will need to update to .290 (once you get on .290 firmware your IMEI should reappear).Then you can either go through .257 to .534 or you can use a special .534 ftf made by [NUT] where no IMEI loss occurs. You can use my guide to guide you through the process:
Thanks for the reply.
Alas i have tried this method but i am unable to download the ftf made by NUT. It wont download. There is no seeders.
Click to expand...
Click to collapse
bernj175 said:
Alas i have tried this method but i am unable to download the ftf made by NUT. It wont download. There is no seeders.
Click to expand...
Click to collapse
HERE
This is the Video Tutorial poster by @shem2409, in the video tutorial check the links, Point 4), to download the FTF by NUT.
Thanks again.
I have downloaded it but when i extract the zip it comes up as ''sin file'' and not ftf files.
Tried to create a ftf bundle in flashtool but it won't flash. It comes up with ERROR.
Again i am at a loss
bernj175 said:
Thanks again.
I have downloaded it but when i extract the zip it comes up as ''sin file'' and not ftf files.
Tried to create a ftf bundle in flashtool but it won't flash. It comes up with ERROR.
Again i am at a loss
Click to expand...
Click to collapse
I don't know what you downloaded but I downloaded the file from the first link today, which shem2409 posted, and I have a classic FTF file, 767.8MB. Both links give me FTF extension file so check again what exactly you downloaded. Anyway if the file is correct rename the extension from .sin to .ftf and you are ready to flash.
Nope. I am not getting a classic ftf file. I am downloading the file. I am extracting the zip and it is giving me a breakdown of the files in sin format. No ftf file to be seen anywhere.
I have downloaded ftf files no issue apart from these ones.
I guess i am doing something wrong somewhere but i am now feeling like a noob as i cannot for the life of me figure out what the hell i am doing wrong.
I even tried to create an ftf file bundle using flashtool but to no avail.
Still at a loss. I am using WinRAR extract to by the way.
Do what I told you. Don't do what you think because you will mess up stuff and at the end you will brick you phone trying to flash some kind of file made by you. If you downloaded correctly from the Point 4) from the Video Tutorial and the size is 770MB then you have just to rename the file from .sin to .ftf, do you understand? Then try to make the process again via flashtool and all will be fine.
I would do but i do not have a ''file'' as such.... When i extract the zip. I have a complete breakdown of the file in sin format and it includes boot folder, META-INF folder and 14 different .sin files.
My understanding is that all together these will make a ftf file but i cant get them into that format. They are in one folder and when opened it gives me a complete breakdown of the file in sin format.
I cannot explain it more and i am unable to copy and paste on here what it is i am seeing.
I have never had this problems with any files before and i cannot figure out what i am doing wrong this time
bernj175 said:
I would do but i do not have a ''file'' as such.... When i extract the zip. I have a complete breakdown of the file in sin format and it includes boot folder, META-INF folder and 14 different .sin files.
My understanding is that all together these will make a ftf file but i cant get them into that format. They are in one folder and when opened it gives me a complete breakdown of the file in sin format.
I cannot explain it more and i am unable to copy and paste on here what it is i am seeing.
I have never had this problems with any files before and i cannot figure out what i am doing wrong this time
Click to expand...
Click to collapse
Ok, now I understand, you get files like on the pictures I posted, right?
Then rename the .zip file to .ftf. If you do not see the extensions on your PC like .txt, .doc, then go to Control Pannel > Folder Options > View and uncheck "Hide extensions for known file types" then Apply and go to rename the Zip file to .ftf and you are ready to flash.
eclyptos said:
Ok, now I understand, you get files like on the pictures I posted, right?
Then rename the .zip file to .ftf. If you do not see the extensions on your PC like .txt, .doc, then go to Control Pannel > Folder Options > View and uncheck "Hide extensions for known file types" then Apply and go to rename the Zip file to .ftf and you are ready to flash.
Click to expand...
Click to collapse
Thanks. Will do that and have another go.
Ok. Now got the phone rooted, backed up and updated to latest version.
Thanks again for the help. Now i can go get some sleep.:victory::victory::victory:
Can the firmware (.534) by NUT be used with C6902 model?
Thanks to anyone who is assisting me.
livelyyoungman said:
Can the firmware (.534) by NUT be used with C6902 model?
Thanks to anyone who is assisting me.
Click to expand...
Click to collapse
Not really, is for C6903 only and I will not recommend to cross over. BTW, to avoid the IMEI lost in the case to downgrade directly to .534 with other Firmware just exclude "Baseband" and all will be fine.
If you're planning to upgrade anyway you'll get your IMEI back, so just root it and upgrade.
Sent from my C6903 using xda app-developers app
eclyptos said:
Not really, is for C6903 only and I will not recommend to cross over. BTW, to avoid the IMEI lost in the case to downgrade directly to .534 with other Firmware just exclude "Baseband" and all will be fine.
Click to expand...
Click to collapse
Thanks for the post.
No that did not work for me. Downgrading to .534 excluding "Baseband" too resulted in loss of IMEI. Tried a few times and failed miserably. I feel I will have to downgrade to .257 before getting to .534 as this is the other suggestion to downgrade without loosing IMEI. But the issue I am facing is that the flash tool does not seem to recognize the .257 ftf file that I downloaded. Not sure why. So planning to download the Global .257 release and then try downgrading to .534 so as to get to rooted status.
MohammadAG said:
If you're planning to upgrade anyway you'll get your IMEI back, so just root it and upgrade.
Sent from my C6903 using xda app-developers app
Click to expand...
Click to collapse
I would be upgrading to the latest firmware but need a rooted device. Rooting 4.3 without unlocking the BL is not possible. Hence want to take the round about way of getting this achieved.
hi, just today i wanted to install social camera for 4.1.2 on my SP. it didnt work. and now my picture effect wont work either.
the details. i dont use any recovery neither CWM nor TWRP, so i manually copy all the files required manually. after it failed, i manually delete all the files again. but im beginning to wonder whether i accidentally delete other file while i was doing it.
any other ideas?
pavapizza said:
hi, just today i wanted to install social camera for 4.1.2 on my SP. it didnt work. and now my picture effect wont work either.
the details. i dont use any recovery neither CWM nor TWRP, so i manually copy all the files required manually. after it failed, i manually delete all the files again. but im beginning to wonder whether i accidentally delete other file while i was doing it.
any other ideas?
Click to expand...
Click to collapse
Did you use the correct port? with a quick search i found this one http://forum.xda-developers.com/showthread.php?t=2667341 . Try using this, and see if the problem is solved (if the effects are included in this one). If that doesn't help, then you can try to find the files from the stock SP firmwares, or re-flash a stock firmware to your device (worst case scenario).
Hope this helps
uriaman1 said:
Did you use the correct port? with a quick search i found this one http://forum.xda-developers.com/showthread.php?t=2667341 . Try using this, and see if the problem is solved (if the effects are included in this one). If that doesn't help, then you can try to find the files from the stock SP firmwares, or re-flash a stock firmware to your device (worst case scenario).
Hope this helps
Click to expand...
Click to collapse
hi, thx for ur reply
yes thats the one i was trying to use. it said to use the z1 social camera app, thats the one that failed
btw how do you extract the files from stock firmware?
pavapizza said:
hi, thx for ur reply
yes thats the one i was trying to use. it said to use the z1 social camera app, thats the one that failed
btw how do you extract the files from stock firmware?
Click to expand...
Click to collapse
How to extract files from an FTF: http://forum.xda-developers.com/showthread.php?t=2327034
But I see it's a bit more work. So, if you want, you can try these camera alternatives, which I found here in the forum:
1) Camera with Photosphere: http://forum.xda-developers.com/showthread.php?t=2342189
2) Android 4.3 Camera (I don't know whether this one will work on 4.1.2): http://forum.xda-developers.com/showthread.php?t=2413518
uriaman1 said:
How to extract files from an FTF: http://forum.xda-developers.com/showthread.php?t=2327034
But I see it's a bit more work. So, if you want, you can try these camera alternatives, which I found here in the forum:
1) Camera with Photosphere: http://forum.xda-developers.com/showthread.php?t=2342189
2) Android 4.3 Camera (I don't know whether this one will work on 4.1.2): http://forum.xda-developers.com/showthread.php?t=2413518
Click to expand...
Click to collapse
thanks for ur reply
for alternative camera i use camera 360 and a better camera
even tho i rarely use the picture effect from stock camera, it just bugs me to know that the feature is broken for me
i think im gonna try to extract it
Hi all,
I havnt flashed a device since the first android ROMS for the HTC HD2, so that gives you an idea of how rusty I am, so please bare with me. I've been reading and searching for hours and my eyes feel like they are bleeding so I'm typing this plea for help whle I atill have some vision.
I ve got a c6903 z1 running the latest 5.1.1 update. stock kernel etc, locked bootloader.
I was on 5.02 rooted and now want to root 5.1.1
After lots of reading I realise that I need to downgrade to 4.4.4 kitkat, then root then install dual recovery, then installl a pre rooted 5.1.1... FIRSTLY - Does this sound right? are these the right steps to root 5.1.1?
Secondly, It took me a while finding Generic .108 ftf files but now I've found a few (through the ftf 'mega thread') and dont know which one I need... the options are:
C6903_14.4.A.0.108_1276-7939_R3C Generic MY.ftf 1060174KB
C6903_14.4.A.0.108_Customized KR.ftf 948416KB
C6903_14.4.A.0.108_Customized UK.ftf 1034553KB
C6903_14.4.A.0.108_Generic-MEA_1277-2880_R5C.ftf 1010011KB
C6903_14.4.A.0.108_Generic FR 1276-5833_R5C.ftf 1019704KB
C6903_14.4.A.0.108_Generic IT 1276-0557.ftf 1050780KB
C6903_14.4.A.0.108_Generic RU 1276-7743.ftf 973615KB
C6903_14.4.A.0.108_Generic_SG_1276-7937_R3C.ftf 1048335KB
Will any of these work considering I'm not staying on 4.4.4?
I assumed I could safely use the 'UK' file from the above list but then got paranoid I might brick my z1 by flashing a Ukranian ROM lol.
I've now got 'the fear' and am afraid I might **** this whole process up and brick my device.
which reminds me, one last thing... Ive downloaded the official SONY Flashtool (ver. 0.9.19.8).. is this the right tool for the job? I seem to remember reading that the official flashtool only works on unlocked bootloaders, but I've read so much im confused as hell at this point.
Sorry for the long post,
Any help would be greatly appreciated.
Correct. There is no direct root for 5.1.1 currently. You could also downgrade to 5.0.2 instead, it doesn't really make a difference between that and 4.4.
It doesn't really matter what your interim ROM is as long as you do a clean flash when updating to 5.1.1 again.
Flashtool is the correct tool to be using. It has a utility called XperiFirm built it. You can use that to get any FTF that's publically available so that you don't have to depend on FTF threads.
The only way to have rooted 5.1.1 is with a pre-rooted zip, so you'll have to use PRFCreator to create that zip if there isn't one already posted for the specific variant you want to use.
thesweeney80 said:
Hi all,
I havnt flashed a device since the first android ROMS for the HTC HD2, so that gives you an idea of how rusty I am, so please bare with me. I've been reading and searching for hours and my eyes feel like they are bleeding so I'm typing this plea for help whle I atill have some vision.
I ve got a c6903 z1 running the latest 5.1.1 update. stock kernel etc, locked bootloader.
I was on 5.02 rooted and now want to root 5.1.1
After lots of reading I realise that I need to downgrade to 4.4.4 kitkat, then root then install dual recovery, then installl a pre rooted 5.1.1... FIRSTLY - Does this sound right? are these the right steps to root 5.1.1?
Secondly, It took me a while finding Generic .108 ftf files but now I've found a few (through the ftf 'mega thread') and dont know which one I need... the options are:
C6903_14.4.A.0.108_1276-7939_R3C Generic MY.ftf 1060174KB
C6903_14.4.A.0.108_Customized KR.ftf 948416KB
C6903_14.4.A.0.108_Customized UK.ftf 1034553KB
C6903_14.4.A.0.108_Generic-MEA_1277-2880_R5C.ftf 1010011KB
C6903_14.4.A.0.108_Generic FR 1276-5833_R5C.ftf 1019704KB
C6903_14.4.A.0.108_Generic IT 1276-0557.ftf 1050780KB
C6903_14.4.A.0.108_Generic RU 1276-7743.ftf 973615KB
C6903_14.4.A.0.108_Generic_SG_1276-7937_R3C.ftf 1048335KB
Will any of these work considering I'm not staying on 4.4.4?
I assumed I could safely use the 'UK' file from the above list but then got paranoid I might brick my z1 by flashing a Ukranian ROM lol.
I've now got 'the fear' and am afraid I might **** this whole process up and brick my device.
which reminds me, one last thing... Ive downloaded the official SONY Flashtool (ver. 0.9.19.8).. is this the right tool for the job? I seem to remember reading that the official flashtool only works on unlocked bootloaders, but I've read so much im confused as hell at this point.
Sorry for the long post,
Any help would be greatly appreciated.
Click to expand...
Click to collapse
Hey there! Welcome to the Z1 community
All you have to do is make sure you flash the ftf specific to your device. As long as it says C6903 in the ftf, you're good to go. all these locations are just country specific customizations with some apps and stuff. I'd say you can just flash the SG ftf for a mostly bloat free system.
In addition, you can't use the SONY flashtool (EMMA) unless you have an unlocked bootloader. I'd recommend you use flashtool (just google it) which lets you flash on both lock and unlocked bootloaders. Once you flash KK, use one of the rooting programs (Turn on USB debugging, and connect it to your computer, run the application and go through the steps. Let me know if you need help on what method of root to use.)
Once rooted, you should have a recovery, which should let you flash a prerooted zip easily.
If you have an unlocked bootloader, just flash any custom kernel through fastboot, boot into its recovery By pressing vol up or down at boot logo) and flash the zip.
Final tip is, make sure you have the prerooted zip on your sd card before you flash a custom kernel, as not all can mount to the PC from the reovery and flashing an incompatible kernel (such as a 4.4.4 kernel on a 5.0 rom) won't let you boot into the ROM.
Feel free to ask if you have any doubts, come across any issues, or need any help at all.
SOURCE: I flashed a customized TW ftf on a Singapore bought C6902 which I'm using in India with no issues at all.
xasbo said:
Correct. There is no direct root for 5.1.1 currently. You could also downgrade to 5.0.2 instead, it doesn't really make a difference between that and 4.4.
It doesn't really matter what your interim ROM is as long as you do a clean flash when updating to 5.1.1 again.
Flashtool is the correct tool to be using. It has a utility called XperiFirm built it. You can use that to get any FTF that's publically available so that you don't have to depend on FTF threads.
The only way to have rooted 5.1.1 is with a pre-rooted zip, so you'll have to use PRFCreator to create that zip if there isn't one already posted for the specific variant you want to use.
Click to expand...
Click to collapse
Thanks for the quick reply mate. Sounds good, I might just go to 5.02 then as rooting that was fairly painless.
Ive already found a pre-rooted zip for stock 5.1.1 so I think I'm good to go on that one. Almost ready to dive in... thanks for clearing that up.
AnrgKrshn said:
Hey there! Welcome to the Z1 community
All you have to do is make sure you flash the ftf specific to your device. As long as it says C6903 in the ftf, you're good to go. all these locations are just country specific customizations with some apps and stuff. I'd say you can just flash the SG ftf for a mostly bloat free system.
In addition, you can't use the SONY flashtool (EMMA) unless you have an unlocked bootloader. I'd recommend you use flashtool (just google it) which lets you flash on both lock and unlocked bootloaders. Once you flash KK, use one of the rooting programs (Turn on USB debugging, and connect it to your computer, run the application and go through the steps. Let me know if you need help on what method of root to use.)
Once rooted, you should have a recovery, which should let you flash a prerooted zip easily.
If you have an unlocked bootloader, just flash any custom kernel through fastboot, boot into its recovery By pressing vol up or down at boot logo) and flash the zip.
Final tip is, make sure you have the prerooted zip on your sd card before you flash a custom kernel, as not all can mount to the PC from the reovery and flashing an incompatible kernel (such as a 4.4.4 kernel on a 5.0 rom) won't let you boot into the ROM.
Feel free to ask if you have any doubts, come across any issues, or need any help at all.
SOURCE: I flashed a customized TW ftf on a Singapore bought C6902 which I'm using in India with no issues at all.
Click to expand...
Click to collapse
Thanks for the in depth reply mate much appreciated. And thanks for the welcome, cheers
Ive got a locked bootloader so I'll check out that unnoficial flashtool, thanks.
Now here is where my confusion and lack of knowledge becomes another problem... You say that after rooting kitkat (using something like 'easy root tool'?) I "should have a recovery, which should let you flash a prerooted zip easily.".......
I was under the impression that after rooting kitkat I would have to install
'XZ Dual Recovery' to let me flash the pre-root zip.
Do I not have to install XZ dual recovery?
Thanks again for all your help... just trying to clear up the details before I start the whole process.
Cheers mate.
thesweeney80 said:
Thanks for the in depth reply mate much appreciated. And thanks for the welcome, cheers
Ive got a locked bootloader so I'll check out that unnoficial flashtool, thanks.
Now here is where my confusion and lack of knowledge becomes another problem... You say that after rooting kitkat (using something like 'easy root tool'?) I "should have a recovery, which should let you flash a prerooted zip easily.".......
I was under the impression that after rooting kitkat I would have to install
'XZ Dual Recovery' to let me flash the pre-root zip.
Do I not have to install XZ dual recovery?
Thanks again for all your help... just trying to clear up the details before I start the whole process.
Cheers mate.
Click to expand...
Click to collapse
Some root kits will install a custom recovery for you, but it's so easy to just install XZDR, that's what I always do. XZDR will actually give you multiple recoveries to choose from (but TWRP is generally considered the best), but it also has some nice addition features like RIC killer (which allows you to have full root vs partial root).
I should also clarify my previous statement - XperiFirm is great for getting *new* firmware.. but you will either need to back up copies of old firmware for future use, or seek them out in threads if you need them later.
xasbo said:
Some root kits will install a custom recovery for you, but it's so easy to just install XZDR, that's what I always do. XZDR will actually give you multiple recoveries to choose from (but TWRP is generally considered the best), but it also has some nice addition features like RIC killer (which allows you to have full root vs partial root).
I should also clarify my previous statement - XperiFirm is great for getting *new* firmware.. but you will either need to back up copies of old firmware for future use, or seek them out in threads if you need them later.
Click to expand...
Click to collapse
ahhh, now that makes sense (re: some root solutions including a recovery), thank you for clearing that up.
One final thing (before I dive in and at least get KK installed+rooted)...
If I have to start reading one more subject I think my head will explode lol so If you could just clear up one thing about RIC Killer....
I want full root, not partial - do I have to mess with RIC Killer or can I leave it alone?
On the guide I am trying to follow; someone said they ended up 'half rooted' - would that be because of RIC killer or user error when creating the pre-rooted zip?
just dont want to go through all this and end up only being half rooted haha, cheers.
edit: ok so after checking flashtool it seems I already have the right one (NOT SONY)... I have version 0.9.19.7 But there are two warnings (pasted below) on the flashtool thread.
Does the first warning simply mean 'Use the latest version'??
I have no clue about the second warning...do i just uncheck the uption regarding simlock.ta IF it is in the list of options when I flash kitkat? I have no clue if my ftf file includes simlock.ta.
Both warnings mention bricks and hard bricks so I'm taking them pretty seriously haha.
Any advice on these warnings would be great, thanks for your patience.
"WARNING : Since Xperia Z, sony added a new set of files I called bootbundle. Those files can be bundled from 0.9.13 and can be flashed from 0.9.13 only. To all those flashing devices from Z edition to all after Z, it is highly advised to use 0.9.13 and to be sure FTF you flash contain the bootbundle set. I've been reported of hard bricks because of missing such set of files from bundles.
I WANT TO GET YOUR ATTENTION ABOUT THE LATEST BRANCH 0.9.19. Without FSC, the tool will by default include simlock.ta if this file is present in the FTF. The result will be a bricked phone
As a workaround, until I release a patch, please please tick the exlude simlock.ta if you see it in the list.
0.9.19.6 fixes the simlock.ta issue. This file is by default excluded. Then it will not be flashed until you explicitely untick the exlcude simlock box. Do it at your own risk."
thesweeney80 said:
ahhh, now that makes sense (re: some root solutions including a recovery), thank you for clearing that up.
One final thing (before I dive in and at least get KK installed+rooted)...
If I have to start reading one more subject I think my head will explode lol so If you could just clear up one thing about RIC Killer....
I want full root, not partial - do I have to mess with RIC Killer or can I leave it alone?
On the guide I am trying to follow; someone said they ended up 'half rooted' - would that be because of RIC killer or user error when creating the pre-rooted zip?
just dont want to go through all this and end up only being half rooted haha, cheers.
Click to expand...
Click to collapse
Even if you don't have a RIC killer installed, most root stuff will work fine. On the Z1, the RIC will prevent you from doing specific things, most importantly mounting /system as writable, which is necessary for certain type of advanced modifications.
However, if you install XZDR, you'll get the custom recovery + the RIC killer. I would just do that.
edit: ok so after checking flashtool it seems I already have the right one (NOT SONY)... I have version 0.9.19.7 But there are two warnings (pasted below) on the flashtool thread.
Does the first warning simply mean 'Use the latest version'??
I have no clue about the second warning...do i just uncheck the uption regarding simlock.ta IF it is in the list of options when I flash kitkat? I have no clue if my ftf file includes simlock.ta.
Both warnings mention bricks and hard bricks so I'm taking them pretty seriously haha.
Any advice on these warnings would be great, thanks for your patience.
"WARNING : Since Xperia Z, sony added a new set of files I called bootbundle. Those files can be bundled from 0.9.13 and can be flashed from 0.9.13 only. To all those flashing devices from Z edition to all after Z, it is highly advised to use 0.9.13 and to be sure FTF you flash contain the bootbundle set. I've been reported of hard bricks because of missing such set of files from bundles.
I WANT TO GET YOUR ATTENTION ABOUT THE LATEST BRANCH 0.9.19. Without FSC, the tool will by default include simlock.ta if this file is present in the FTF. The result will be a bricked phone
As a workaround, until I release a patch, please please tick the exlude simlock.ta if you see it in the list.
0.9.19.6 fixes the simlock.ta issue. This file is by default excluded. Then it will not be flashed until you explicitely untick the exlcude simlock box. Do it at your own risk."
Click to expand...
Click to collapse
Correct, the warning is to just make sure you use a version later than 0.9.13; you're fine to use 0.9.19.7. It will tell you that .8 is out, but the change is not important to you. You don't need to do anything special regarding simlock.ta.
If you have an external SD card, copy everything you want to flash onto the phone before starting (5.1.1 prerooted, SuperSU, XZDR), so it's already there when you need it.
xasbo said:
Even if you don't have a RIC killer installed, most root stuff will work fine. On the Z1, the RIC will prevent you from doing specific things, most importantly mounting /system as writable, which is necessary for certain type of advanced modifications.
However, if you install XZDR, you'll get the custom recovery + the RIC killer. I would just do that.
Correct, the warning is to just make sure you use a version later than 0.9.13; you're fine to use 0.9.19.7. It will tell you that .8 is out, but the change is not important to you. You don't need to do anything special regarding simlock.ta.
If you have an external SD card, copy everything you want to flash onto the phone before starting (5.1.1 prerooted, SuperSU, XZDR), so it's already there when you need it.
Click to expand...
Click to collapse
THANKS.
So As long as I install XZDR I will have RIC killer and that will ensure a full root? thats great, cheers..
Thanks for clearing up the flashtool warnings too, very much appreciated.
As for your final tip about the SD card... do you mean copy everything to the SD card? or the phone? I'm ASSuming you mean the SD card as the phone memory will get wiped during flasshing if I clear everything? no?
Sorry mate I'm having a total brain-fart after everything Ive read, my comprehension skills are at an all time low lol. Tired.
Thanks again for all ya help mate, I'm just about ready to get this crap done... and then once Ive finished I know I'll be thinking 'wtf was all the panicking about? lol.
THANKS.
thesweeney80 said:
THANKS.
So As long as I install XZDR I will have RIC killer and that will ensure a full root? thats great, cheers..
Thanks for clearing up the flashtool warnings too, very much appreciated.
As for your final tip about the SD card... do you mean copy everything to the SD card? or the phone? I'm ASSuming you mean the SD card as the phone memory will get wiped during flasshing if I clear everything? no?
Sorry mate I'm having a total brain-fart after everything Ive read, my comprehension skills are at an all time low lol. Tired.
Thanks again for all ya help mate, I'm just about ready to get this crap done... and then once Ive finished I know I'll be thinking 'wtf was all the panicking about? lol.
THANKS.
Click to expand...
Click to collapse
Make sure you flash SuperSU and XZDR at the same time. If you do not, it will not work correctly (still only partial root). If you make your own pre-root ZIP, you can roll them into it and do it in one fell swoop.
Yeah. External SD card = not the phone. If you do a clean flash (which you should), you will be wiping the phone storage.
xasbo said:
Make sure you flash SuperSU and XZDR at the same time. If you do not, it will not work correctly (still only partial root). If you make your own pre-root ZIP, you can roll them into it and do it in one fell swoop.
Yeah. External SD card = not the phone. If you do a clean flash (which you should), you will be wiping the phone storage.
Click to expand...
Click to collapse
You're the man, man...THANKS. :highfive:
I'll check the pre-root zip I found and if it doesnt have Supersu included I'll make my own and include XZDR too - I like the idea of having things 'slipstreamed' into one flash - thanks for the tip.
Thanks a lot for all your help in calming all my little worries about this process,,, very much appreciated.
I'll do the whole lot tomorrow and report back... thanks again.
Suggestion - since you are re-learning and your goal at the moment is to have a rooted 5.1.1, I suggest you download and install Flashtool for windows. Go to http://www.flashtool.net/index.php. Now in Flashtool, your need to install the appropriate drivers for your device/s. Instructions searching (I'm doing my lunch while typing reply - lol). Then use XperiFirm which is integrated in Flashtool. It has its own icon, just click it so you can download a 5.0.2 FTF for yor region. Install that 5.0.2 FTF on your phone using Flashtool (Flash it Baby! Flash it!) Then you can root 5.0.2 with ease using Kingroot. Replace Kingroot with SuperSU. Then install NUT's Dual recovery. Then you can download any of the pre-rooted 5.1.1 FTFs XDA peeps are putting up under the General section and boom. You are now on 5.1.1. with root.
Deathschythe33 said:
Suggestion - since you are re-learning and your goal at the moment is to have a rooted 5.1.1, I suggest you download and install Flashtool for windows. Go to http://www.flashtool.net/index.php. Now in Flashtool, your need to install the appropriate drivers for your device/s. Instructions searching (I'm doing my lunch while typing reply - lol). Then use XperiFirm which is integrated in Flashtool. It has its own icon, just click it so you can download a 5.0.2 FTF for yor region. Install that 5.0.2 FTF on your phone using Flashtool (Flash it Baby! Flash it!) Then you can root 5.0.2 with ease using Kingroot. Replace Kingroot with SuperSU. Then install NUT's Dual recovery. Then you can download any of the pre-rooted 5.1.1 FTFs XDA peeps are putting up under the General section and boom. You are now on 5.1.1. with root.
Click to expand...
Click to collapse
cheers mate, I appreciate all the help I can get lol.
I decided to go with 5.0.2 instead of kitkat, but when I click on the .270 firmware links in xperifirm I get an error which says:
"Incomplete Firmware.
The following files are missing on the server:
fsp.zip.
Proceed with caution"
I clicked on the latest 5.1.1 firmwares and none of them give this error... so does the error simply mean that .270 is not the latest version? I couldnt find the answer in google. Are thes firmwares without fsp.zip safe to flash?
Thanks again.
edit: hmmm looks like i'll have to flash 4.4 instead.
When I try to download a .270 (5.0.2) firmware in xperifirm; it stops downloading after a few seconds and says a reuired file is missing
If I try to download one of the .368 firmwares it downloads ok
edit 2: F*ck my life... Not enough space on C: for unpacked ftf file (Small c partition on SSD) ... so unless there is a way for flashtool to flash from d:\...\firmware im screwed. I'll try compressing (NTFS) the c drive and hope thats enough
thesweeney80 said:
edit 2: F*ck my life... Not enough space on C: for unpacked ftf file (Small c partition on SSD) ... so unless there is a way for flashtool to flash from d:\...\firmware im screwed. I'll try compressing (NTFS) the c drive and hope thats enough
Click to expand...
Click to collapse
There is a solution, but it's slightly complicated. Proceed at your own risk, maybe do a little research to make sure you understand what I'm tell you to do.
1) Browse to C:\Users\<username>\. if you aren't already, show hidden files and folders.
2) Grab the .flashTool directory and move it onto a drive with sufficient free space (e.g., D:\.flashTool).
3) Go to Start and type cmd into the search field. When cmd.exe shows up, right-click and select Run As Administrator.
4) Change to the user directory ("cd C:\Users\<username>").
5) Make a junction point named .flashTool pointed to where ever you moved the folder (e.g., "mklink /j .flashTool D:\.flashTool").
This will make flashtool think that its settings/data folder is in the right place, when really it's just a fake folder linked somewhere else.
xasbo said:
There is a solution, but it's slightly complicated. Proceed at your own risk, maybe do a little research to make sure you understand what I'm tell you to do.
1) Browse to C:\Users\<username>\. if you aren't already, show hidden files and folders.
2) Grab the .flashTool directory and move it onto a drive with sufficient free space (e.g., D:\.flashTool).
3) Go to Start and type cmd into the search field. When cmd.exe shows up, right-click and select Run As Administrator.
4) Change to the user directory ("cd C:\Users\<username>").
5) Make a junction point named .flashTool pointed to where ever you moved the folder (e.g., "mklink /j .flashTool D:\.flashTool").
This will make flashtool think that its settings/data folder is in the right place, when really it's just a fake folder linked somewhere else.
Click to expand...
Click to collapse
Thanks again mate. Ive done that once before and forgotten all about it.
This time I just compressed c:\ with NTFS compression and it gained just enough space (F*ck you Winsxs).
But the above info will surely come in handy in future, so once again: Thanks! Tou've been a big help.
Just about to install XZDR and a pre-rooted 5.1.1 :fingers-crossed: Cheers mate :good:
thesweeney80 said:
Thanks again mate. Ive done that once before and forgotten all about it.
This time I just compressed c:\ with NTFS compression and it gained just enough space (F*ck you Winsxs).
But the above info will surely come in handy in future, so once again: Thanks! Tou've been a big help.
Just about to install XZDR and a pre-rooted 5.1.1 :fingers-crossed: Cheers mate :good:
Click to expand...
Click to collapse
What a way you went through.
As you already were on 5.0.2 and rooted you just had to install xzdr to your phone.
After that you could flash one of the Pre-Rooted zip files you need.
Sent from my C6903 using XDA Free mobile app
motorazrv3 said:
What a way you went through.
As you already were on 5.0.2 and rooted you just had to install xzdr to your phone.
After that you could flash one of the Pre-Rooted zip files you need.
Sent from my C6903 using XDA Free mobile app
Click to expand...
Click to collapse
well I know that now dont I? :silly: haha
yeah I was on a kingrooted 5.02, and should have just installed XZDR etc but I upgraded to 5.1.1 ASSunming I could root it with kingroot again, big mistake.
If I had read about kingroot not working on 5.1.1 I could have saved 24hrs worth of headaches.
Oh well... all done now. Rooted on 5.1.1, busybox installed and all
Now begins the long process of re-installing and customizing all over again *yipee*
No doubt I will go through all this again in a few weeks when I decide to unlock the BL and install a customROM And kernel
THIS is why I spent a few years with a 'dumb' phone after my HD2... ohhh the joys of flashing.
BIG Thanks to evryone who helped me out on this especially Xasbo, Gamer4Life and Deathschythe33. CHEERS
:good: glad you got it sorted.
Please Xasbo help, I Have loop all the time
xasbo said:
:good: glad you got it sorted.
Click to expand...
Click to collapse
Please, kan you help, I flashed downgrading my C6903 from .386 to C6903_14.4.A.0.108_Stripped, and got loops. Then I Tried again with several firmwares.108 and .386 and got the same result Loop :crying::crying:
I flashed with C6903_14.4.A.108 Generic SG and everything went fine, I got this massage:"NFC Firmware updating" "Don´t turn off you device", and got loop. Oh my god???? What Iam doing wrong?
Any suggestion. Thank you
asswembler said:
Please, kan you help, I flashed downgrading my C6903 from .386 to C6903_14.4.A.0.108_Stripped, and got loops. Then I Tried again with several firmwares.108 and .386 and got the same result Loop :crying::crying:
I flashed with C6903_14.4.A.108 Generic SG and everything went fine, I got this massage:"NFC Firmware updating" "Don´t turn off you device", and got loop. Oh my god???? What Iam doing wrong?
Any suggestion. Thank you
Click to expand...
Click to collapse
Hmm. I've never seen that NFC message before. Did it look like that firmware update completed before the phone restarted?
Are you still able to flash anything to the phone? What are you trying to accomplish?