Hi,
I've just tried to put Jellybam rom on my note. I did all the needed stuff (wipe, forma, ...), proceeded everything in the aroma installer but when it rebooted, i've had the GT-N7000 logo and then nothing, just a black screen. I can't even put it on recovery mode or download mode ... =/ Someone can help me ? Thanks a lot !
demaj said:
Hi,
I've just tried to put Jellybam rom on my note. I did all the needed stuff (wipe, forma, ...), proceeded everything in the aroma installer but when it rebooted, i've had the GT-N7000 logo and then nothing, just a black screen. I can't even put it on recovery mode or download mode ... =/ Someone can help me ? Thanks a lot !
Click to expand...
Click to collapse
Were you running a safe kernel? What rom were you on?
I was using hydracore kernel and on the Alliance Rom. Moreover my home button is out ...
demaj said:
Hi,
I've just tried to put Jellybam rom on my note. I did all the needed stuff (wipe, forma, ...), proceeded everything in the aroma installer but when it rebooted, i've had the GT-N7000 logo and then nothing, just a black screen. I can't even put it on recovery mode or download mode ... =/ Someone can help me ? Thanks a lot !
Click to expand...
Click to collapse
According to me you should try PIT method while flashing
I too had similar problem where i couldnt get to recovery no matter which rom i flashed
How can I use PIT method ? I need Odin for it but I can't get into download mode because of my broken home button. Do you know another way to get recovery or download mode ? thnx for answering =)
Hmmm may be you can use a usb jig to force the phone into download mode
demaj said:
Hi,
I've just tried to put Jellybam rom on my note. I did all the needed stuff (wipe, forma, ...), proceeded everything in the aroma installer but when it rebooted, i've had the GT-N7000 logo and then nothing, just a black screen. I can't even put it on recovery mode or download mode ... =/ Someone can help me ? Thanks a lot !
Click to expand...
Click to collapse
take a 300 ohm resistor and connect pin 3 and 5 of the micro usb port not sure jou will have to look it up and then it forces it into download mode
Note Boot but black screen after GTN7000 logo
glevitan said:
Were you running a safe kernel? What rom were you on?
Click to expand...
Click to collapse
I've got exactly the same problem and was on Glory ROM with PhilZ kernel. I have found the following thread http://forum.xda-developers.com/showthread.php?t=1667886 but as I'm not a developer I'm wondering if there's an idiot's guide for idiots like me!
All help gratefully received!!
OK here's my idiot's guide
I did a bit of digging around yesterday and found a solution that worked for me. I couldn't get the phone past the N7000 logo - it just kept going black - even though i could hear the boot animation sound and the phone was working - only I could find any buttons that would allow me to answer the call!!
So...for an overview watch this - http://rootgalaxynote.com/galaxy-no...brick-att-galaxy-note-sgh-i717-android-2-3-6/ I nkow this says it's for a SGH-1717 but the basic approach is right.
Then assemble your requirements:
1. You'll need to have Odin for PC on your PC (naturally)
2. You'll need to download a stock ROM - select the relevant one for your phone (not the AT&T one mentioned in the video) here - http://samsung-updates.com/
3. USB drivers for your phone - I already had them and if you've been playing with your phone and bricked ti you probably already have too!!
Then follow his instructions - it worked for me - yippee!!
blank screen after installing Philz Touch 6
Hi folks,
I just installed on my n7000 Philz Touch 6.26 yesterday. then upon reboot, I got a blank screen.
Here are some details on the Philz touch
Philz Touch 6
buld version 6.26.6 - n7000
CWM base version: v6.9.4.8
touch GUI revision 1.16
compiled Apr 14, 2014 at 13:36:54
Please help.
Bluestring1538
bluestring1538 said:
Hi folks,
I just installed on my n7000 Philz Touch 6.26 yesterday. then upon reboot, I got a blank screen.
Here are some details on the Philz touch
Philz Touch 6
buld version 6.26.6 - n7000
CWM base version: v6.9.4.8
touch GUI revision 1.16
compiled Apr 14, 2014 at 13:36:54
Please help.
Bluestring1538
Click to expand...
Click to collapse
Maybe you chose a Kernel that didn't fit to your Rom. So please add infos about the Rom version you use.
Note boot but lak screen after gtn7000 logo
ThaiDai said:
Maybe you chose a Kernel that didn't fit to your Rom. So please add infos about the Rom version you use.
Click to expand...
Click to collapse
Thanks for that prompt reply. Am sorry i was not ale to check my kernel. Can you help me how to do that . Also how to check my ROM version. Additinal info i can give is that i can still do the booting but do not know what to download. I can turn it to download mode. What would you recommend me to do? Shall i try odin method? Thanks.
bluestring1538 said:
Thanks for that prompt reply. Am sorry i was not ale to check my kernel. Can you help me how to do that . Also how to check my ROM version. Additinal info i can give is that i can still do the booting but do not know what to download. I can turn it to download mode. What would you recommend me to do? Shall i try odin method? Thanks.
Click to expand...
Click to collapse
May be... Booting into philz recovery and connecting to pc, running getprop in shell will give you the info.
Thank you. Will give it a try.
blank screen after installing Philz Touch 6
bluestring1538 said:
Thank you. Will give it a try.
Click to expand...
Click to collapse
Hi Folks, I forgot to tell you that I had earlier upgraded my g7000 by installing PHILZ-cwm6-ddl-odd-4.93.6-Signed. and it worked. but when I installed Phil touch 6 i got a black screen after rebooting. What I did is I tried to install back PHILZ-cwm6-ddl-odd-4.93.6-Signed and it now working. I was just thinking if it is still possible for me to use the other program in xda developers site and what you would recommend that would fit my device. here are some info in my about device: model number GT-7000
Android Version 4.1.2
Baseband version: N7000XXLT3
Kernel version:
3.0.31-906407
[email protected]#3
SMP PREEMPT WED mAR 6 19:53:40 KST 2013
Build Number
JZO54K.N7000XXLT9
THANKS
Related
Q&A for the MIUI rom
MIUI beta 8 for captivate---plz help urgently
miui beta 8 can not find any sim card in my captivate. trying to flash back to 2.2 but cant get CWM or download mode to work. Tried all 3 button tricks. Did not work. Please help urgently
chemisam said:
miui beta 8 can not find any sim card in my captivate. trying to flash back to 2.2 but cant get CWM or download mode to work. Tried all 3 button tricks. Did not work. Please help urgently
Click to expand...
Click to collapse
Wow , that's wierd . I flashed beta 8 with no problems .
Ummm ... assuming you've done ALL possible 3 button tricks , did you try going into airplane mode ?
You've probably already done this , but just making sure , did you try rebooting the phone ?
Just curious , what were your steps to flash MIUI ? And how do you normally go to download mode ?
actually i followed the exact same procedure in the miui forum and also I was in 2.2 based roms. download mode worked when I was flashing miui rom. But does not work anymore
BTW I go to download mode by holding the up and down vol button together and then plugging in the USB cable to the phone
chemisam said:
BTW I go to download mode by holding the up and down vol button together and then plugging in the USB cable to the phone
Click to expand...
Click to collapse
What is the kernel on your phone, settings/system/about phone select more info
MIUI
karnel is speedmod-kernel-k13c-500hz
version: 2.6.35.7-g99995d1
erm, your supposed to have a cm7 kernel or a variant of it....
your sposed to flash the speedmod kernel
then flash the efsbackup file
then flash the cm7 kernel
then flash miui...
chemisam said:
karnel is speedmod-kernel-k13c-500hz
version: 2.6.35.7-g99995d1
Click to expand...
Click to collapse
You messed up. if you can't get into dl mode you will need a jig
MIUI
Real long shot here
If you have wifi, dl sgs kernel flasher from market. Actually dl a compatible cm7 kernel. Use kernel flasher to try to flash kernel. Probably won't work cause sounds like you can't see your sd. Also did you flash the efs backup as stated in the instructions?
MIUI
right now i have soft bricked the phone
I tried all the tricks...my last hope is JIG
chemisam said:
actually i followed the exact same procedure in the miui forum and also I was in 2.2 based roms. download mode worked when I was flashing miui rom. But does not work anymore
Click to expand...
Click to collapse
chemisam said:
karnel is speedmod-kernel-k13c-500hz
version: 2.6.35.7-g99995d1
Click to expand...
Click to collapse
That means you didn't follow instructions properly . Try using the kernel flasher . And flashing one of the "[KERNEL][CM7] ...." kernels . MIUI is based off of the nexus S , and CM7 uses a captivate version kernel from Nexus S .
If all else fails , DL jig .
For the new Rc1 do you have to flash Beta 7 then Rc1 or can you go straight to RC1
Help
I followed all the steps and flashed MiuiCapPre1 and got it to work. I rebooted the device and I am now stuck in a endless reboot. All I see is Galaxy S Cyanogen mod screen and occasionally a At&t screen. I also can't seem to enter Download Mode I get the screen that looks like its about to display the battery.
Any suggestions how on how to fix this?
if this is answered im sorry, but i cant figure out out to get my contacts from my sim to show up or import them
...
why can i download any apss on the market ???
No Incoming Text Messages
hello I flashed the latest miui version (rc2) and I am not receiving text messages. I can send them out but I just cant receive any. Anyone have any advice? everything else seems to be working correctly. Appreciate any help! Btw, this is my first time flashing the miui on the captivate.
wibi795 said:
why can i download any apss on the market ???
Click to expand...
Click to collapse
go to the app downloads and push the menu button and select download using mobile network.
So I flashed RC2 and it came up as I9000 device. I flashed TheEscapists 4.2 kernel and it changed to his kernel but kept the device as I9000? I have not had time to keep up with the thread like I normally do so is this an issue that is known or just a single occurrence?
Wow lol didn't even know we had one of these, if you have questions then you should read the FAQ section in the third post of the MIUI thread otherwise you might as well post your question on the thread rather than here as it will be answered a lot faster.
Sent from my SAMSUNG-SGH-I897 using XDA App
I'm sorry if this has been asked before but I don't think so... Anyway I had a perfectly working Galaxy Ace coming with stock Android 2.3.4. So I tried rooting it, and I did see the superuser icon but I couldn't apps into the SD card. So I ignored it and downloaded a custom rom and entered recovery mode, wiped data and cache first and rebooted. Then I installed the rom in recovery mode and it said installation successful but when I rebooted I got stuck at the "GALAXY ACE" page and I noticed a weird small blue triangle at the top left hand. And nothing happens. Please help it's nearly brand new! My parents don't know yet... If there is a way to use the com and download the stock rom please provide step by step instructions that was my first smartphone so much help would be appreaciated!
jleonnn said:
I'm sorry if this has been asked before but I don't think so... Anyway I had a perfectly working Galaxy Ace coming with stock Android 2.3.4. So I tried rooting it, and I did see the superuser icon but I couldn't apps into the SD card. So I ignored it and downloaded a custom rom and entered recovery mode, wiped data and cache first and rebooted. Then I installed the rom in recovery mode and it said installation successful but when I rebooted I got stuck at the "GALAXY ACE" page and I noticed a weird small blue triangle at the top left hand. And nothing happens. Please help it's nearly brand new! My parents don't know yet... If there is a way to use the com and download the stock rom please provide step by step instructions that was my first smartphone so much help would be appreaciated!
Click to expand...
Click to collapse
Am not an expert but i would take battery out then put back in holding volume down key home key and power key at sametime to put into download mode then flash your stock rom via odin to get it back running again
have you done a datwipe in cwm after installing? try that first
Hey there!
Before We get to ODIN
Start phone in recovery mode ( Center Button + Power Button ) and then:
- Do a Factory Reset
- Do Wipe Cache
Then Reboot
If he boots great!
If not and still remains at ACE screen do this:
1st - Download Odin 4.38 (http://www.4shared.com/rar/UqBhp5Qd/Odin_Multi_Downloader_v438_www.html)
2nd - Download Cooper.ops (http://hotfile.com/dl/138852983/36a55ea/Cooper_v1.0.ops.rar.html)
3rd - Go to http://www.sammobile.com/firmware/ and search firmware for your s5830
Then choose the rom that suits you best (download one from your country if possible)
After the above steps are done open odin
At "option" select - "One Package, Auto-Reboot And Protect OPS"
At "select OPS" - choose "Cooper.ops" (The file you´ve downloaded)
At bottom is "One Package" - In here put the file of the room you´ve dowloaded
Finaly put phone in download mode (Vol. Down + Power Button) and connect it to your PC.
Wait for odin to recognize your phone, a yellow sign will light up, ( you need samsung kies in your computer so odin recognize your phone)
And then hit "Start"
Wait about five minutes at the end your phone should reboot by itself
And that should be it
If your phone reboots but stuck ate samsung boot animation.
Remove Battery
Put it back again
Turn your phone into recovery mode ( Center Button + Power Button )
Do Wipe Factory/Reset and Wipe cache, reboot,
and your good to go!
I rebooted I got stuck at the "GALAXY ACE" page and I noticed a weird small blue triangle at the top left hand
Click to expand...
Click to collapse
the blue triangle isn't this CWM 5?
or if can you get to recovery mode try flashing the original stock recovery first
http://forum.xda-developers.com/showthread.php?t=1437426
then install a stock rom with Odin
and boot from the stock recovery to fix the phone boot
if recovery is working you should fix the phone easily with stock rom.
installing a stock rom will install the stock recovery by itself!
so no need to flash stock recovery before flashing stock rom!
Can someone please explain what went wrong here in the first place?
Sent from my S5830L using XDA App
Honestly i cannot tell!
But probably the custom rom wasn't compatible!
Or during the rom istallation something went rong
... only suposing
That blue triangle is coz of cwm 4
Sent from my GT-S5830 using xda premium
wellll some custom rom require pre installation of another rom... like INFINITY ICE CREAM SUNDAY they require CM& to be pre installed....
so i would suggest u to reflash 2.3.4 on ur ace using odin...
http://forum.xda-developers.com/showthread.php?t=1071970
if it locks on start screen
go in recovery mode and do a factory reset and cache reset... enjoy
then flash as per instructed on the custom rom page.....
You guys are all wrong .
It's because of CF-ROOT .
You guys should've known from the start LOL
Herpderp Defy.
We could have had it allllllllllllllllllllll
Rolling in the deeeeeeeeeeeeeeeeeep
EmoBoiix3 said:
You guys are all wrong .
It's because of CF-ROOT .
You guys should've known from the start LOL
Herpderp Defy.
We could have had it allllllllllllllllllllll
Rolling in the deeeeeeeeeeeeeeeeeep
Click to expand...
Click to collapse
What's that? I'm still a noob I dunno...
ambujpriyadarshi1991 said:
wellll some custom rom require pre installation of another rom... like INFINITY ICE CREAM SUNDAY they require CM& to be pre installed....
so i would suggest u to reflash 2.3.4 on ur ace using odin...
http://forum.xda-developers.com/showthread.php?t=1071970
if it locks on start screen
go in recovery mode and do a factory reset and cache reset... enjoy
then flash as per instructed on the custom rom page.....
Click to expand...
Click to collapse
For your information,icsunday does not need cm to be pre installed...what you said was completely wrong..
Sent from my SamsungGalaxyAce with my hands,take it or leave it
EmoBoiix3 said:
You guys are all wrong .
It's because of CF-ROOT .
You guys should've known from the start LOL
Herpderp Defy.
We could have had it allllllllllllllllllllll
Rolling in the deeeeeeeeeeeeeeeeeep
Click to expand...
Click to collapse
+1..i people don't know what they are talking about,then they shouldn't reply..
Sent from my SamsungGalaxyAce with my hands,take it or leave it
jleonnn said:
What's that? I'm still a noob I dunno...
Click to expand...
Click to collapse
CF-ROOT is a kernel..
Sent from my SamsungGalaxyAce with my hands,take it or leave it
Can someone please explain CF-ROOT to me pleaseeee
BTW Can someone give me a link for a good working stock rom for my ace? Thanks in advance
jleonnn said:
btw can someone give me a link for a good working stock rom for my ace? Thanks in advance
Click to expand...
Click to collapse
google google and google :d
Doo:DAce said:
google google and google :d
Click to expand...
Click to collapse
I mean a real link... The only link I see is to hotfile and for some reason I CAN'T DOWNLOAD T.T
I've made you a full tuturial!
in there was a link to samfirmware! In samfirmware is all the roms you could ever need!
Keep trying hotfile!
Cause of download limitations sometimes it takes a bit before you can download anything
SnowPluralism said:
I've made you a full tuturial!
in there was a link to samfirmware! In samfirmware is all the roms you could ever need!
Keep trying hotfile!
Cause of download limitations sometimes it takes a bit before you can download anything
Click to expand...
Click to collapse
Alrighty thanks... Cuz on hotfile I pressed download they told me the file was downloading but I couldn't find anything. But thanks nonetheless
Sir,I need help very badly,I have just flashed PhilZ-cm6-JPLR8-OJP on my brand new note,it went thu all the Pc Odin'steps properly and it said "PASS" and rebooted,when my locked screen openned and I swiped my pattern code correctly,but it got stuck there,I seemed ti have done the procedure correctly because Odin said it passed,and I tried to reflash it as per Mr PhilZ recommendation in case of bootlop,but still the same,Since I didn't do any Wipe on the stock recovery,I can still enter into download mode and my binary counts keeps raising up,please help I just bought this note 3 days ago.What should I do,your help woul be greatly appreciated,thank in advance.
here are the info of my phone;
Baseband; N7000XXLRPK
kERNEL VERSION:3.015-N7000JPLR8-CL979677
smp preemt tue July 31 19;18
KST 2012
Build No. IMM76DJPLR8
United Arab Emirates
TRA.ID 0016333/09
TA; 00000000/00
what happens when you press vol up power and home together? do you have philz recovery?
As you can read at PhilZ thread the recommended methode is using stock recovery rather than Odin. As mentioned in the previous thread you should get into recovery mode and repeat the process, this time without odin (detailed instructions).
If the above do not work, check whether you can go to download mode.
Sent from my GT-N7000 using xda premium
Succesfully back to my stock rom and rooted
Guys,
Once again I would like to express my thanks to all of you for your help.Now I am back to my stock rom and succesfully rooted it.
From my Lg OB to my move over to GNote these Community is always here to dislodge me whenever I got stuck.Thanks so much guys,I
hope you'll still be around on my next misadventure.Happy Flashing
Hello,
I have installed this "ibtimes . co . uk / articles / 419836 / 20130102 / android421-jellybean-cm101-custom-rom-samsung-galaxy . htm" rom on my (actually my mom's) galaxy ace S5830 and it worked just fine. Before i installed it i made a CWM recovery backup. I wasn't happy with the rom so i wanted to go back to my last one by restoring the backup. first i wiped data and cache and then restored the backup. But now when i tried to reboot the system it got stuck on the Samsung logo and later on it was just a light blue screen. can someone help me please.
Don't worry, you need to flash a stock ROM via Odin. Look at the stickies
Sent from my pet- Megatron™
Chill your phone can be fixed easily
Simple Bro , Download the firmware files from sammobile.com then Google for Galaxy Ace Odin ..I guess the version is 4.38 or something like that ..and make sure you download the cooper file with it then flash the original firmware using Odin.So then your phone is back to how it was when you bought it.
I hope this was helpful.
If you want the instructions on how to do this ..let me know ..I'll give you the link for the files also
Help!
I'm having the same problem.
I tried to install a new rom on my Samsung Galaxy GT-S5830, but when it was supposed to boot, nothing happend.
I tried to install the original firmware using Odin, but the problem is that I can't connect my phone to my computer.
The only thing my phone is able to do now, is showing the charging screen, opening the samsung recovery mode and accessing the download mode.
I really hope that someone could help me!
Thanks in advance.
PS:
My provider is Vodafone (don't know if it's important)
BscorpionII said:
I'm having the same problem.
I tried to install a new rom on my Samsung Galaxy GT-S5830, but when it was supposed to boot, nothing happend.
I tried to install the original firmware using Odin, but the problem is that I can't connect my phone to my computer.
The only thing my phone is able to do now, is showing the charging screen, opening the samsung recovery mode and accessing the download mode.
I really hope that someone could help me!
Thanks in advance.
PS:
My provider is Vodafone (don't know if it's important)
Click to expand...
Click to collapse
Dude! Switch off the phone. Then press the 3key combo to go to Download mode. U don't need to go to recovery either (which is a 2key combo). & ops name should be:-
COOPER_v1.0.ops
Sent Via XDA™ Premium
BscorpionII said:
I'm having the same problem.
I tried to install a new rom on my Samsung Galaxy GT-S5830, but when it was supposed to boot, nothing happend.
I tried to install the original firmware using Odin, but the problem is that I can't connect my phone to my computer.
The only thing my phone is able to do now, is showing the charging screen, opening the samsung recovery mode and accessing the download mode.
I really hope that someone could help me!
Thanks in advance.
PS:
My provider is Vodafone (don't know if it's important)
Click to expand...
Click to collapse
Hi BscorpionII!
As you can open recovery, if you don't have CWM 5.0.2.6 you could install it from your recovery and then try installing another ROM from CWM 5.0.2.6.
You could read this link
"Nielli's [GUIDE] Guides and Tips How to Root SGA, Install CWM5 and install Mods + Downloads"
In the link you'll find the last stable recovery -version 5.0.2.6- and much more.
Good luck.
i'm using omnirom 4.4.2 but i want to upgrade to 4.4.4 but everytime i boot to recovery i'm stucked at teamwin logo
Bad luck...
Could you give some more info? Did you do a factory reset? What ROM exactly did you flash? Why don't you just wait that someone answers your question?
Gesendet von meinem GT-N7000 mit Tapatalk
Arals said:
i'm using omnirom 4.4.2 but i want to upgrade to 4.4.4 but everytime i boot to recovery i'm stucked at teamwin logo
Click to expand...
Click to collapse
With it a couple of minutes and see if you get the options.
I'm using omni ROM 4.4 since nov2013. This all started when I flashed the 050514 build. I did not do factory reset because i'm using omnirom before
I waited for a few minutes. Still nothing goes to teamwin logo then black screen then teamwin logo then black screen over and over
Arals said:
I waited for a few minutes. Still nothing goes to teamwin logo then black screen then teamwin logo then black screen over and over
Click to expand...
Click to collapse
Download philz XXLTA tar kernel file and flash using odin, uncheck auto reboot. . Power off and boot into recovery. Then flash raw kernel and flash your ROM again.
nokiamodeln91 said:
Download philz XXLTA tar kernel file and flash using odin, uncheck auto reboot. . Power off and boot into recovery. Then flash raw kernel and flash your ROM again.
Click to expand...
Click to collapse
It worked. Thanks. Just got a orange triangle on Samsung logo
Arals said:
where could i download it?
Click to expand...
Click to collapse
Use the search
Can you explain this process to a noob, please
nokiamodeln91 said:
Download philz XXLTA tar kernel file and flash using odin, uncheck auto reboot. . Power off and boot into recovery. Then flash raw kernel and flash your ROM again.
Click to expand...
Click to collapse
I am more or less a noob so I need very precise instructions if I am to follow your advice.
I have a rooted N7000 running Asylum Omnirom 4.4.2. (Omni version 4.4.2-20140318-Asylum-N7000, Baseband N7000XXLT3 Kernel version 3.0.64-666-g5984047 [email protected] #1 Tue Mar 18 05:29:00 CET 2014 Asylum Omni Build omni_n7000-userdebug 4.4.2 KVT49L Eng.chasmodo.20140318.045429 test-keys)
I have TWRP on it (unsure of the version - all the software I used to root my phone is on my external harddrive at home.). This morning it was working fine but then rebooted unexpectedly. When it powered back on, it got stuck at the Samsung screen, so I rebooted but it was still stuck so I pulled the battery to reboot. No good, still in bootloop. So went into recovery mode and did factory reset/wipe data. It started but saw no progress whatsoever (i.e. no blue colour overtaking the grey along the spinning bar showing it was progressing along). I had to do some other things so left it plugged into the wall charger (battery was at about 78% when it rebooted but I did have both bluetooth and wifi running so that could really drain it). When I returned about 40 minutes later it was back at the Samsung screen. Now if I try to go into recovery, I get the TEAMWIN splash screen but it never goes beyond that. Tried pulling the battery, sim card, SD card, and various combinations. Tried a different battery, tried all sorts of variations I found searching but none have gotten me either past the Samsung screen if I try to boot up normally, or past the TEAMWIN screen if I try to boot into recovery.
I found this thread from last year and I am hoping this will work for my situation. However, I have never used ODIN (it seems to be there if I do the Volume down-power-home combination) so I want to make sure I understand this precisely. When you say flash the raw kernel, what precisely are you referring to? When I originally rooted my phone I just followed a YouTube video and don't recall having a "raw kernel". So I need some guidance as to what you mean by this, please.
Thanks
jah732
jah732 said:
I found this thread from last year and I am hoping this will work for my situation. However, I have never used ODIN (it seems to be there if I do the Volume down-power-home combination) so I want to make sure I understand this precisely. When you say flash the raw kernel, what precisely are you referring to? When I originally rooted my phone I just followed a YouTube video and don't recall having a "raw kernel". So I need some guidance as to what you mean by this, please.
Thanks
jah732
Click to expand...
Click to collapse
Search for Philz thread for N7000.. go to the 3rd post where it says TW kernels and download the xxtla kernel.. download odin 1.85 from google. Make sure you have Samsung usb drivers installed.. If not, google that too and download from Samsung developer site. Install it.. Make sure you have no kies processes running in the task manager.
Boot the phone in download mode and connect to PC. open odin as admin. (watch Youtube video for how to flash using odin)
Select the kernel file in PDA and uncheck the autoreboot option..
flash.. Once you get a green pass or res ok.. remove the cable and remove the battery.
Boot into recovery by pressing the vol up+home+home (obviously put the battery back in)
You should get Philz recovery.. Check and proceed from there.