Hi,
i tried to write these questions in his topic but i havent 10 posts so i couldn't do it
I hope that malcho or something that have this ROM can help me
1. I use a GB ROM now... (2.3.6) i can flash this ROM only with wipes or need flash other ROM first (as CM10)
2. I see 3 differents ROMS to download... 4.2.1 - 4.1.2 - v3
What's the differences? i read that 4.1.2 is better (more stable) but why? i dont want flash 4.1.2 if in 2 weeks 4.2.1 will be better and i must to do wipes again...
Thx for help
dudoso said:
Hi,
i tried to write these questions in his topic but i havent 10 posts so i couldn't do it
I hope that malcho or something that have this ROM can help me
1. I use a GB ROM now... (2.3.6) i can flash this ROM only with wipes or need flash other ROM first (as CM10)
2. I see 3 differents ROMS to download... 4.2.1 - 4.1.2 - v3
What's the differences? i read that 4.1.2 is better (more stable) but why? i dont want flash 4.1.2 if in 2 weeks 4.2.1 will be better and i must to do wipes again...
Thx for help
Click to expand...
Click to collapse
My worm suggestion is to go with 4.1.2.More stable and everything works.
You can flash 4.2.1 without wipe over this(not recomended).But there will be a time till 4.2.1 be fully functional.
Try 4.1.2 you won't regret.
Many regards
Thx for reply
I'll try 4.1.2 and in the future I'll try 4.2.1 if i want it... xD
For installation... can I flash over a clean 2.3.6 directly or i need flash a JB or ICS first (as CM)?
dudoso said:
Thx for reply
I'll try 4.1.2 and in the future I'll try 4.2.1 if i want it... xD
For installation... can I flash over a clean 2.3.6 directly or i need flash a JB or ICS first (as CM)?
Click to expand...
Click to collapse
You can flash over a clean 2.3.6 but first read tutorials. Basics:
1. Get root permisions
2. Install CWM
3. Get your ROM (zip file).
4. Then follow ROM installation intructions.
Hi again,
I install 4.1.2 before and all was ok... then try 4.2.1 and had very problems
Install from CWM it's ok, but when reboot and start config... only have this messages:
"Installatiewizard is gestopt"
And FC, FC, FC.....
Of course i try to install 4 times and ALWAYS I did 3 wipes....
Can help me pls?
I can not create a new user in the terminal (pm create-user name) and I can not create a new user with the user managemed app, my question is if I am doing any wrong or if this ROM (Beast 4.2.1-20121214) can not have multi user.
Sorry for my english, but it is not my first language.
Related
Hi All,
My note is currently on 2.3.6 JPKK2 firmware rooted and I wish to flash a deodexed stock GB 2.3.6 ROM for better themes and mods.
My question is, which Deodexed ROM should I flash and how?
Many Thanks.
the JKay Deluxe ones are very good and stable as is typical of anything from Jkay
jakhan86 said:
Hi All,
My note is currently on 2.3.6 JPKK2 firmware rooted and I wish to flash a deodexed stock GB 2.3.6 ROM for better themes and mods.
My question is, which Deodexed ROM should I flash and how?
Many Thanks.
Click to expand...
Click to collapse
Well, There isn't the perfect Rom. Once you have rooted your note, just try all roms one by one and you'll see.
Check the changelog to have a first idea of which rom could be good for you, then flash it.
About how: in any Rom thread there are instruction for flashing. Otherwise, normally you Can flash a Rom via cwm "flash zip from sd card" then wipe dalvik and cache...sometimes wipe data Can be needed
How to flash the official ICS im from INDIA i want to flash ICS released by sammobile. .
Please guide me how to flash my note is running cm9
Keep cm9
Inviato dal mio GT-N7000 con Tapatalk 2
Moved To Q&A
Please post questions in the Q&A section
Use Mobile Odin Pro (Support Chainfire!!!)
I feel sorry for you moderator. But i told you so. When real ics comes noone is going to use your sticky thread. Good luck deleting al those ussles threads that are made before reading one thread that will help.
srinivas07 said:
How to flash the official ICS im from INDIA i want to flash ICS released by sammobile. .
Please guide me how to flash my note is running cm9
Click to expand...
Click to collapse
Iniya maalai vanakkam .(gud eve).Use mobile odin to flash it and you should be fine.but remember revert back to stock gb and flash it.donot flash over any custom ics especially if you are in those chinese leak...by the way robbie at darkyrom had already deodexed it and we expect the first custom ics rom for N7000 in an hour or so
vijai2011 said:
Iniya maalai vanakkam .(gud eve).Use mobile odin to flash it and you should be fine.but remember revert back to stock gb and flash it.donot flash over any custom ics especially if you are in those chinese leak...by the way robbie at darkyrom had already deodexed it and we expect the first custom ics rom for N7000 in an hour or so
Click to expand...
Click to collapse
hey i have the Chrack ROm v18 XXLC1. and of course my phone is rooted. can i just upgrade to this rom using Odin or will i also have to go back to some stock rom and then flash this rom. can u pls pls tell me i will be greatful to u for ur help
aami.aami said:
hey i have the Chrack ROm v18 XXLC1. and of course my phone is rooted. can i just upgrade to this rom using Odin or will i also have to go back to some stock rom and then flash this rom. can u pls pls tell me i will be greatful to u for ur help
Click to expand...
Click to collapse
Replied to your PM
custom ics u mean tw based?
vijai2011 said:
Iniya maalai vanakkam .(gud eve).Use mobile odin to flash it and you should be fine.but remember revert back to stock gb and flash it.donot flash over any custom ics especially if you are in those chinese leak...by the way robbie at darkyrom had already deodexed it and we expect the first custom ics rom for N7000 in an hour or so
Click to expand...
Click to collapse
th rom ur talking abt is tw based? vl it hv premium suite apps?
What I recommend, based on what I did:
- Download the leaked German official ROM (about 600-700Mb), .tar.md5 file and put into your phone's sd-card.
- Install Mobile Odin Pro from Play Store (need to pay. there's free version too, but I suggest you pay for Pro, safer).
- In M. Odin, open the .tar.md5 file, and press flash. (if you don't mind wiping, best to also check the wipe options).
I didn't wipe, and then it couldn't boot.
So I booted into recovery, and wiped data/factory reset and cache, then it booted fine.
Still had root.
Then I installed CF-Kernel. Go to the Dev thread and scroll down till you see the GT...LPY version and download that zip. Unzip to take out the .tar file, copy to sd-card.
Use Mobile Odin to open it, and then flash. It will flash the kernel, and then you will have ClockworkMod recovery so that you can backup/restore ROMs again.
(Note: You can actually do the above in one single step, but opening the CF kernel file after you open the ICS file, so that everything else points to the ICS file except the kernel points to CF Kernel.)
Hit the THANKS button if this helps any of you!
We're seeing tons of same question today..
Here's my instructions for stock ICS (no root, no Mobile Odin Pro required, no money required):
http://forum.xda-developers.com/showpost.php?p=25947847&postcount=4
hp79 said:
We're seeing tons of same question today..
Here's my instructions for stock ICS (no root, no Mobile Odin Pro required, no money required):
http://forum.xda-developers.com/showpost.php?p=25947847&postcount=4
Click to expand...
Click to collapse
emmm it is suitable if you have gb on your phone, if you have ics repacked rom, you will get brick
EdgaBimbam said:
emmm it is suitable if you have gb on your phone, if you have ics repacked rom, you will get brick
Click to expand...
Click to collapse
Really? I thought PC Odin will completely overwrite everything using the stock image.
hi everyone
i'm on ics stunner 1.4.26.1 and baseband (i9220ZCLP5) and kernel (3.0.15-i9220ZCLP6) and i want to flash a cyanogenmod rom but how to do that if i'm on affected kernel right ?
please help me guys
You have the affected kernal all i did was flashed a stock gb rom using pc odin and then started all over again but never use the leaked repack again if i was you i would just flash stock gb rom then root and flash recovery and then try the offical ics update before going to cm9 !
But please read this before doing anything
http://forum.xda-developers.com/showthread.php?t=1633938
arturutrata91 said:
hi everyone
i'm on ics stunner 1.4.26.1 and baseband (i9220ZCLP5) and kernel (3.0.15-i9220ZCLP6) and i want to flash a cyanogenmod rom but how to do that if i'm on affected kernel right ?
please help me guys
Click to expand...
Click to collapse
Go all the way back to GB first.
PC Odin one of the pre-rooted GB Roms.
Then go to Chainfires CF-Root thread and download the corresponding kernel
(i.e. if you flashed LC1 Rom, download LC1 CF-Root kernel) and flash it through
Mobile Odin to inject CWMR.
Reboot and let the Rom settle.
Download CM9 and Gapps.
Reboot into CWMR.
Flash CM9, flash Gapps.
Do a full wipe (factory reset/cache/dalvik)
Reboot and enjoy.
Hi Chasmodo bit of topic but can you have a look at my question in q&a i need someone with your expertise to help me lol
http://forum.xda-developers.com/showthread.php?t=1647282
Sonic1981 said:
Hi Chasmodo bit of topic but can you have a look at my question in q&a i need someone with your expertise to help me lol
http://forum.xda-developers.com/showthread.php?t=1647282
Click to expand...
Click to collapse
Sorry, unable to help you there with anything concrete. My Note never behaved
like that, neither on GB nor on ICS.
But I know that similar graphic issues affect a number of Notes. There's a longish
thread in General about it, with gazillion posts.
It seems that some Notes are more affected by graphic driver glitches (if that
causes it?) than others.
So I am sort of new to the Android world and so far this forum's been very helpful,
I bought a second hand device with Criskelo ROM ICS v11 installed , and I have 3.0.15 NoteCore v11.1 Kernel.
Android version 4.0.4
Phone is note very stable. I am not sure if thats the case will all androids but when i compare to ios its sort of pathetic.
I want to remove Criskelo , maybe get something much lighter and with less bugs.
I've read many guides but I still dont get a few things :
1- What are CM9 and CM10 ? are those custom ROMs?
2- I read somewhere that my kernel is "safe". Does this mean I wont brick my phone no matter what i flash/install/remove ?
3- Also Are there different versions for Stock ROMs around ? I thought a stock rom for ICS 4.0.4 would be "unique" . This thread is a bit confusing
4- I am thinking of giving Paranoid Android a try but I read on a different site that I would lose my s-pen sensitivity and s-note access.
5- Lets say I want to install PA, is it better if I go to stock , then root then install PA or install PA without reverting back to stock ROM in the first place?
Sorry for my bad english ,
Thank you all
reply
hi
1/ CM9 and CM10 are costom roms called AOKP that means this roms are not based on the stock rom ,it is based on the android open source project . this rom does not have the TW (touchWizz) suport.
2/ your karnel is safe mean that the eMMC_erase_cape was disabled by the developer ,and you can do wipes without riscks ,but flashing some thing dangerous can brick your phone.
3/ yes there is alot of stock release I list some : LQ2 ,LQ3 ==> 4.0.3 and LRG LRI LRK LRQ ==> 4.0.4 my favorite is LRQ.
4/ yes paranoid is not a TW rom it is an AOKP rom no suport for Spen and no Spen applications ,but it is a nice rom you should try it.
5/ you can install PA from any rom ,if you are on crisklo's or any other stock based roms you must do a full wipe affter the installation ,or it will not boot.
I think I answer to all your questions ,my english is bad sorry for that .
any other questions I will be here
thanx
lord-ralf-adolf said:
hi
1/ CM9 and CM10 are costom roms called AOKP that means this roms are not based on the stock rom ,it is based on the android open source project . this rom does not have the TW (touchWizz) suport.
2/ your karnel is safe mean that the eMMC_erase_cape was disabled by the developer ,and you can do wipes without riscks ,but flashing some thing dangerous can brick your phone.
3/ yes there is alot of stock release I list some : LQ2 ,LQ3 ==> 4.0.3 and LRG LRI LRK LRQ ==> 4.0.4 my favorite is LRQ.
4/ yes paranoid is not a TW rom it is an AOKP rom no suport for Spen and no Spen applications ,but it is a nice rom you should try it.
5/ you can install PA from any rom ,if you are on crisklo's or any other stock based roms you must do a full wipe affter the installation ,or it will not boot.
I think I answer to all your questions ,my english is bad sorry for that .
any other questions I will be here
thanx
Click to expand...
Click to collapse
1 its AOSP not AOKP.... AOKP its another custom rom like cm9/10 Wich are builded from AOSP.
2 its KERNEL universal software term for that part of the OS you don't need to know English to write it properly.
3 -
4 PA its not AOKP and it's compiled from CM10 sources.
5 you need to wipe when changing roms no matter what.. You just gotta be sure you are on a safe kernel before doing so
Enviado desde mi GT-P7500 usando Tapatalk 2
reply
msedek said:
1 its AOSP not AOKP.... AOKP its another custom rom like cm9/10 Wich are builded from AOSP.
2 its KERNEL universal software term for that part of the OS you don't need to know English to write it properly.
3 -
4 PA its not AOKP and it's compiled from CM10 sources.
5 you need to wipe when changing roms no matter what.. You just gotta be sure you are on a safe kernel before doing so
Enviado desde mi GT-P7500 usando Tapatalk 2
Click to expand...
Click to collapse
1/ thats what I was sayying.
2/ thanx for the correction (I hate linux any way)
3/
4/ no we don't need wipe if we are going from an cmX to CMX and if we are going from stock/based stock to stock/based stock without changing CSC .
re : I noticed that you treat noobs like sh*t on this forum ,we are humains !!
I didn't do any thing wrong I think ...
Thanks All
I just installed stock ICS 4.0.4
All my data is still there, i dont know maybe i need to wipe AFTER i install stock.
The way I've done it is : put phone in odin mode ( volume down , power and home key )
connect to pc
load odin , load the image and click start
and that was pretty much it , at no point did i have to wipe reset all data. ( i wanted to but i dont know why it didnt happen ) so all my data and apps are still there
I believe I am not rooted at the moment. and my Kernel has now changed back to : 3.0.15 - N7000XXLRK-CL811902
I would like to root the phone and also wipe all data if possible.
Should i change my kernel as a first step ? and if yes give me a safe way /tutorial link
thanks
You are not rooted and you need to do a full wipe
But it should be done only with a safe kernel
Flash hydracore kernel and you will automatically get rooted and then ,its safe to do a full wipe
http://forum.xda-developers.com/showthread.php?t=1749863
Never do a full wipe on stock kernel
i installed philz recovery yesterday after which i bricked my n7000 while i tried installing the C-Rom .
I just now used ODIN to get back to my STOCK ROM that is 2.3.6.
Its really interesting to see how i can just go back to the first firmware my phone came with :angel:
Please suggest me a combination of a custom recovery & a custom ROM without getting bricked .
as im new to this open source & trying new things for my phone ,i would like to try something according to your experiences .
Something which is stable ,smooth and latest !!
Thanks !!
i have read many many posts and whenever i try to install any recovery, i get E:verification failed !!
what am i doing wrong !! Please help !!
rajk53 said:
i installed philz recovery yesterday after which i bricked my n7000 while i tried installing the C-Rom .
I just now used ODIN to get back to my STOCK ROM that is 2.3.6.
Its really interesting to see how i can just go back to the first firmware my phone came with :angel:
Please suggest me a combination of a custom recovery & a custom ROM without getting bricked .
as im new to this open source & trying new things for my phone ,i would like to try something according to your experiences .
Something which is stable ,smooth and latest !!
Thanks !!
i have read many many posts and whenever i try to install any recovery, i get E:verification failed !!
what am i doing wrong !! Please help !!
Click to expand...
Click to collapse
While on GB you cannot install any kernel from recovery.. only using Odin. . You have to be either on ICS or JB to be able to follow Philz kernel install steps.
nokiamodeln91 said:
While on GB you cannot install any kernel from recovery.. only using Odin. . You have to be either on ICS or JB to be able to follow Philz kernel install steps.
Click to expand...
Click to collapse
First of all, Thanks a lot for your reply. Now i understand why and how my several attempts failed
now i clearly understand that if im on JellyBean , then i can install kernel from recovery.
I just updated my phone to JellyBean using the official update option in the phone.
Can you please direct me to the right link to install kitkat rom from using odin .
rajk53 said:
First of all, Thanks a lot for your reply. Now i understand why and how my several attempts failed
now i clearly understand that if im on JellyBean , then i can install kernel from recovery.
I just updated my phone to JellyBean using the official update option in the phone.
Can you please direct me to the right link to install kitkat rom from using odin .
Click to expand...
Click to collapse
KK cannot be installed using Odin as its a custom rom.. As you are on JB, root it using one of the Philz kernels matching your rom build number (post 3 or Philz thread TW).. The flash raw r4 kernel, boot into its recovery and then flash KK roms.
nokiamodeln91 said:
KK cannot be installed using Odin as its a custom rom.. As you are on JB, root it using one of the Philz kernels matching your rom build number (post 3 or Philz thread TW).. The flash raw r4 kernel, boot into its recovery and then flash KK roms.
Click to expand...
Click to collapse
Thanks a lot for the information
I checked the link ,i found this kernel to be matching with my build number.
PhilZ-cwm6-XXLRK-XEU-v2.7
Should i now install it using the recovery ?
Also please let me know what do you mean by "The flash raw r4 kernel" ( is this the kernel im currently installing ?)
After installation, please suggest me a KK ROM !
rajk53 said:
Thanks a lot for the information
I checked the link ,i found this kernel to be matching with my build number.
PhilZ-cwm6-XXLRK-XEU-v2.7
Should i now install it using the recovery ?
Also please let me know what do you mean by "The flash raw r4 kernel" ( is this the kernel im currently installing ?)
After installation, please suggest me a KK ROM !
Click to expand...
Click to collapse
And I can add an old baby bottle for free...
ThaiDai said:
And I can add an old baby bottle for free...
Click to expand...
Click to collapse
Please kindly just reply by answering the specifically asked question regarding the kit kat rom.
I am in a confused state as i can see there are a huge amount of ROMs available many are nightly made, which say them to be not in a stable state.
Found the SlimKat in the forum ,downloading the ROM SlimSaber-n7000-4.4.2-20140531.zip 139mb
Installation instructions..
Download the latest build from [here]
Gapps ( if you don't have it already) from [here]
!Recommended! Full wipe, and manual format /system
Flash ROM and the gapps you want, reboot
Maybe a silly question but ,Do i need to download the gapps files & why ??
rajk53 said:
Please kindly just reply by answering the specifically asked question regarding the kit kat rom.
Click to expand...
Click to collapse
Please kindly start to grow up and read and learn yourself. Do not expect spoon-feeding from other members.
This is a development forum. It is not expected that you are a developer but it would be a sign of respect to read their threads and follow their instructions - they spent a lot of their time writing them. And if you not understand then try to use the search.
Should i now install it using the recovery ?
Also please let me know what do you mean by "The flash raw r4 kernel" ( is this the kernel im currently installing ?)
After installation, please suggest me a KK ROM !
Click to expand...
Click to collapse
Not one of these questions show anything of this:
the first is part of the installation instructions.
the second can be found with the search (and was answered thousands of times)
the third is simply against XDA rules
To flash a kitkat rom, the recovery needs to be compatible with SE linux.
The recovery is part of a kernel
To flash a kitkat rom you need to flash a recent kernel first.
Try flashing raw kernel r4,r5, or Forest-CM11. it does not matter that they are incompatible with your current or future roms, they will get overwritten when you flash a rom (roms include kernels).
Then reboot recovery or restart phone and enter recovery again.
Then you wipe cache, data, and system.
Then flash the kitkat rom of choice.
gapps
Azeazezar said:
To flash a kitkat rom, the recovery needs to be compatible with SE linux.
The recovery is part of a kernel
To flash a kitkat rom you need to flash a recent kernel first.
Try flashing raw kernel r4,r5, or Forest-CM11. it does not matter that they are incompatible with your current or future roms, they will get overwritten when you flash a rom (roms include kernels).
Then reboot recovery or restart phone and enter recovery again.
Then you wipe cache, data, and system.
Then flash the kitkat rom of choice.
Click to expand...
Click to collapse
Thanks a lot for the explanation,
I installed slim ROM but i didnot like it . where can i find the simplest basic KK ROM without any mods ?
rajk53 said:
Thanks a lot for the explanation,
I installed slim ROM but i didnot like it . where can i find the simplest basic KK ROM without any mods ?
Click to expand...
Click to collapse
http://forum.xda-developers.com/search.php?searchthreadid=2770097
rajk53 said:
Thanks a lot for the explanation,
I installed slim ROM but i didnot like it . where can i find the simplest basic KK ROM without any mods ?
Click to expand...
Click to collapse
https://source.android.com/