Database Develop

[Q] bricked galaxy tab..kindly help please.

hello there! i have one galaxy tab P1000...my tab is unlocked and rooted and also has super user access and clockwork recover mod installed on it..
i was trying to flash my tab with an cynogen mod rom for galaxy tab ..and after that try my tab is stuck in to a screen which says on top "overcome cWm Recovery v3.0.2.4
and its not letting me do anything ..its just keeps comig back to same screen again and again ..i also tried flashing it again through SD card update but that didn't work to...im uploading a video ..please go through it and you will have better idea of what im talking..thanks for your help..
http://www.youtube.com/watch?v=9h0nlYgCAZg

ok, instead of using the hardware buttons to select an option, itshould let you use the capacitative buttons on the bezel.
If you use the volume button to highlight your selection, then i think its either the menu or home capacitative button(the ones on the screen bezel), which will make the selection for you.
Hope it helps.

stoney73 said:
ok, instead of using the hardware buttons to select an option, itshould let you use the capacitative buttons on the bezel.
If you use the volume button to highlight your selection, then i think its either the menu or home capacitative button(the ones on the screen bezel), which will make the selection for you.
Hope it helps.
Click to expand...
Click to collapse
thanks for reading and replying...i already tried what u r suggesting but didn't work..
i just used a new pit file and now it gets stuck on galaxy tab written on screen...
but good things is i still go in to downloading mode by pressing volume down and power keys..help

If you still go to download mode. Then go back to stock using roto jmi rom. Refer to the overcome thread to find out how to flash and get necessary pit file.

soft brick please help

Hey i know the answers are here but the only net access i have is on my phone its really hard to find answers.
That being said i tried flashing my gfs stock 2.2 captivate with the fire fly rom via rom manager. Now it is stuck at the att logo screen. I tried doing 3button recovery but couldn't get in. I can get in downloading mode though. Can you give me stock tar file to flash thru Odin please or just the link also i made a nandroid backup with cmw but can't get into recovery. Thank you guys

dont know how your going to do it if you only have internet on your phone... but if you do at some point have access to a computor i would suggest the odin one click to revert to stock 2.1 but thats only if the phone came with 2.1 if it came with 2.2 i'm not exaactly sure what you would do but ive heard some horror stories of new bricked capivates because of using the one click.
so to recap if it came with 2.1 use this
http://forum.xda-developers.com/showthread.php?t=731989&highlight=stock

Thanks for the reply. I will have access to PC later that's why i want to gather info now. Anyway the phone actually came with the 2.2. Maybe there's a stock 2.2 tar somewhere to flash via Odin? Is there any other way i can try to get into recovery cause i made a backup. I tried holding volume up with home button and power button but it just keeps restarting. Also tried letting go of the power button while holding the two still.

ah... well thats your problem. volume, home and power is the i9000 captivate is both volumes and power and then release once you see the [email protected] logo. i see your on tmobile so im guessing your on the vibrant... ok so once you volume up down and power you should get into clockwork from there wipe dalvic factory reset and wipe cache should boot from there and if not just say and ill try to find the answer in the meantime

Thanks for your replies man i tried both volumes and power button followed by a release at att logo but nothing happens just sits there..

Anyone has a tar i can use to bring me to stock via Odin?i know there's got to be one.. i can get into download mode but can't get into recovery... bummer.

Sorry just read whit i typed and realized i said it wrong. you hold down all three buttons then release the power when you see the at&t logo but continue holding the volume rockeruntill it boots to clockwork

i just got to my pc. i tried that as well with no luck. any other suggestions?

Do the same procedure but let the boot screen process cycle through twice and then release the power button.
Sent from my SGH-I897 using XDA App

Samsung Captivate 2.1 soft brick please help
I have a samsung captivate was working fine until I forgot to charge it and the battery was completely drain. After full recharge turn on the phone but now stock on the Galaxy S logo then turn off. I can access recovery mode but still can't passed the galaxy S logo after recovery mode. My phone was rooted V2.1 EClair and lag fixed. Any help really appreciate it.
Phone can access via ADB command but i dont know the commands. Please help I stock on the Galaxy S logo after a while the screen turn black.

JIG is best solution. You should get one for up rom

MobileXT said:
I have a samsung captivate was working fine until I forgot to charge it and the battery was completely drain. After full recharge turn on the phone but now stock on the Galaxy S logo then turn off. I can access recovery mode but still can't passed the galaxy S logo after recovery mode. My phone was rooted V2.1 EClair and lag fixed. Any help really appreciate it.
Phone can access via ADB command but i dont know the commands. Please help I stock on the Galaxy S logo after a while the screen turn black.
Click to expand...
Click to collapse
If all of your apps/contacts are backed up i would suggest just reflashing stock JF6 eclair via OdinOneClick.

[Q] Power butten not working in recovery

I’ve got an AT&T Captivate that is stuck in 3e recovery, because it won't recognize when I use the power button to select "reboot system now."
Some background:
It was stuck in a boot loop running CM7. I re-installed éclair to take advantage of 2e recovery. Rooted it, and intended to put a version of UCKB1 without 3e recovery, so I could install unsigned files to prep for a re-install of CM. Apparently I flashed the wrong rom or the flash got corrupted. I can’t get it into download mode. Tried using a jig, tried using one-click unbrick. I can’t even use ADB, since it is in recovery.
Any help would be amazing! Thanks in advance.

Does the phone boot all the way to Android or does it still loop?
Did you use the jig while in recovery?
you have to use it on a powered off state.
Just yank the battery and either try the jig while powered off, or if it boots correctly use adb while it's powered up.

Thanks for replying. The phone does not boot into android, it gets stuck in 3e. I used the jig with the phone off. (I did try with it on just for kicks, but no joy.)
The phone "recoginizes" the power button when I try to turn it on, it gets to recovery, and then won't recognize a butten press in order to boot the rest of the way.
Thoughts?

Fixed it
Re-tried with a newly made jig. Must have blown a resister last time. Works now. Thanks for the advice.

I have this same issue intermittently, usually after a modem flash in cwm3. The txt will pop up saying that the back button has been disabled. A battery pull and restart and it reboots fine. Just a mystery to me...

Yeah that happens from time to time.try to Hold both volume buttons. That will sometimes re-enable the back button.
Ionno why that happens....

Some recoveries i've seen used back button or home button to select...just saying might work
Sent from my SAMSUNG-SGH-I897 using xda premium

Yeah some recoveries not all, I know specifically in boog's kernels, you can use the capacitive buttons.
Settings = down
Home = up
Search = select

you have to cycle from the bottom to the top... i don't know why it does this..
Hit down repeatedly until you end at the top. the power button will work.

Note 5 is stuck in android recovery

hi, i have recently tried rooting my Note 5 by flashing spacex kernel, so first i had to install a custom recovery i used "twrp-3.0.2-0-nobleltetmo.img (1).tar" . i installed via odin and rebooted into recovery. Once i rebooted into it i had a message with "installing update" or something like that with an android figure and then it changed to the robot laying down with a triangle with the message "no command". i tried rebooting the phone out of recovery but it just looped back to the same message
ps. the power button on the note 5 is not responsive, and it is 32gb tmobile
thanks to anyone who can help

Have you tried using ODIN to restore back to stock.

Leo_is_m said:
Have you tried using ODIN to restore back to stock.
Click to expand...
Click to collapse
The phone doesnt go past the samsung logo and the android recovery, when i use the button combination to go to DOWNLOAD, it takes me to the download screen but doesnt go any further.
I had a problem similar to this with my note 2 which also had a broken key, i was able to mess with the key and was ablew to boot into the phone

THEJUANANDONLY said:
The phone doesnt go past the samsung logo and the android recovery, when i use the button combination to go to DOWNLOAD, it takes me to the download screen but doesnt go any further.
I had a problem similar to this with my note 2 which also had a broken key, i was able to mess with the key and was ablew to boot into the phone
Click to expand...
Click to collapse
You could flash an official update.zip from Samsung and see if that works
What device model do you have? You must've flashed the wring twrp or something, it looks like you flashed the TMobile Version. Are you in T-Mobile?

if you can see that robot lying around... its mean you did not success to flash the twrp. it still stock recovery. try push vol button up/down several time and see if the stock recovery menu appear or not.

Help xposed failed (galaxy s6 sprint 5.1.1)

I have a Samsung Galaxy s6 on 5.1.1 (Sprint SM-G920P)
I tried downloading and failing to install xposed stupidly. So then it was stuck on a bootloop. I then again stupidly did a factory reset thinking that it'll fix the problem (but it only got worst in my opinion) i then flashed twrp and tried to install the uninstall for xposed but i couldnt uninstall it because it wasnt any data folder to put it in since i ****ing did a factory reset. Anyways then i got frustrated and did an advanced wipe and cleared all the data... I am now just stuck on the "samsung galaxy s6 ... Powered by android" screen and i need help . I literarlly tried everything
Black and white Samsung logo showed up.
Initially I could only get to blue Downloading screen
By observing and trying various described ways I finally got to the Android recovery menu.
My current procedure to get there is here:
Turn off holding Down+Power
The b/w Samsung logo will automatically come up and stay that way forever
Hold Down+Power+Home until screen goes black and move finder from Down to UP while still holding the Power+Home
as soon as black and white Samsung logo comes up AND continue holding UP+Power+Home until Android flashes and recovery menu comes up.
Then I did go through the described wipe cash, and factory reset and some more wipe cash with reboot system in various combinations and always ended on black and white Samsung logo screen.
Tried to flash sboot but failed.
Then the new firmware showed up for sprint and i tried flashing 2 firmwares (G920PVPU3BOJ7_G920PSPT3BOJ7_SPR and G920PVPU3BOI1_G920PSPT3BOI1_SPR)but both succeeded but is still on the samsung logo screen
From the recovery menu only power down selection is useful as it does turn the phone off until I turn it on. The power button does not power off – it just boots back on.
Apply update from cache gives yellow text in the bottom of the scree: “APPLY_CHEK is deprecate.”
I have no clue how to use e.g. first 3 menu items.
Reboot to bootloader – just brings the b/w logo .
View log displays row upon row of things I have no clue about – pages of it.
On the very bottom of the screen – in yellow – there are two lines:
“dm-verification failed…
Need to check DRK first…”
Please help. — Max