So I just got a Galaxy Ace (S5830i) and was all excited to root etc.. with no problems. I browsed the net and stumbled upon Jelly Blast which I flashed (correct place to use that term?) with no problem. Decided I didn't like it so wanted to go back to the original settings. Researched that a bit and flashed (again not sure if it's the right term) back to retribution. However since then I haven't been able to use my phone.
I just get Samsung boot screen. I couldn't enter recovery mode however could enter download mode. I followed this tutorial http://forum.xda-developers.com/showthread.php?t=731989&page=4
however got stuck in Odin on a zimage. After 10 mins or so my phone turned it's self off and now will not turn on. I'm mortified and have no idea what to do. Any help would be greatly appreciated. Wish I'd never played with it now :crying:
PS. Know I'm an idiot..
ekaekar said:
So I just got a Galaxy Ace (S5830i) and was all excited to root etc.. with no problems. I browsed the net and stumbled upon Jelly Blast which I flashed (correct place to use that term?) with no problem. Decided I didn't like it so wanted to go back to the original settings. Researched that a bit and flashed (again not sure if it's the right term) back to retribution. However since then I haven't been able to use my phone.
I just get Samsung boot screen. I couldn't enter recovery mode however could enter download mode. I followed this tutorial http://forum.xda-developers.com/showthread.php?t=731989&page=4
however got stuck in Odin on a zimage. After 10 mins or so my phone turned it's self off and now will not turn on. I'm mortified and have no idea what to do. Any help would be greatly appreciated. Wish I'd never played with it now :crying:
PS. Know I'm an idiot..
Click to expand...
Click to collapse
I think it is just a softbrick.Download odin3 v3.07 from the dev section.Connect your phone in download mode(power key+volume up+volume down while turning on) and put the stock rom file from sammobile.com into pda section and click start.Hope it helps.This will get you back on stock rom.If you dont understand me,refer the unbrick tutorial in the dev section.Cheers!
Sent from my GT-S5830i using xda app-developers app
andy.acei said:
I think it is just a softbrick.Download odin3 v3.07 from the dev section.Connect your phone in download mode(power key+volume up+volume down while turning on) and put the stock rom file from sammobile.com into pda section and click start.Hope it helps.This will get you back on stock rom.If you dont understand me,refer the unbrick tutorial in the dev section.Cheers!
Sent from my GT-S5830i using xda app-developers app
Click to expand...
Click to collapse
My phone doesn't turn on at all so can't even get it into download mode.. :crying:
it on holding power key volume buttons the pc makes the tone that something has connected but within second also disconnects. there is no activity on the phone.
ekaekar said:
My phone doesn't turn on at all so can't even get it into download mode.. :crying:
it on holding power key volume buttons the pc makes the tone that something has connected but within second also disconnects. there is no activity on the phone.
Click to expand...
Click to collapse
Remove battery and then try it......it should work. Connect via cable and try entering download mode.....insert battery if you see download mode and then flash a stock rom.
Sent from my GT-S5830i using Tapatalk 2
try this
ekaekar said:
My phone doesn't turn on at all so can't even get it into download mode.. :crying:
it on holding power key volume buttons the pc makes the tone that something has connected but within second also disconnects. there is no activity on the phone.
Click to expand...
Click to collapse
what abt battery charge?? if its fine probably ur on hard brick...check this steps If your phone doesn’t boot into download mode..
Step 1 – Prepare odin with the firmware u want to flash (go and find firmware in samobile.com and use odin 3.75 ==>its in my skydrive:laugh: )
Step 2 – Remove battery and connect your galaxy acei to the computer;
Step 3 -- Insert battery holding Volume down + Power + Home
Step 4 – At this point Odin should have detected your SG Acei ( Yellow rectangle should appear);
Step 5 – Click Start button in Odin and wait about 5 min.
If all goes well it should come back to life.
niyaz1327 said:
what abt battery charge?? if its fine probably ur on hard brick...check this steps If your phone doesn’t boot into download mode..
Step 1 – Prepare odin with the firmware u want to flash (go and find firmware in samobile.com and use odin 3.75 ==>its in my skydrive:laugh: )
Step 2 – Remove battery and connect your galaxy acei to the computer;
Step 3 -- Insert battery holding Volume down + Power + Home
Step 4 – At this point Odin should have detected your SG Acei ( Yellow rectangle should appear);
Step 5 – Click Start button in Odin and wait about 5 min.
If all goes well it should come back to life.
Click to expand...
Click to collapse
Hi Thank you
Think maybe it's hard bricked? Will not go into download at all. Followed all the above steps. When I put the cable in with no battery and hold volume and power buttons the computer registers something is plugged in with tudung sound however almost instantly disconnects it with dutung sound. Odin doesn't get a chance to detect my ace.
Any further suggestions?
Originally Posted by niyaz1327<br />
what abt battery charge?? if its fine probably ur on <font color="Red">hard brick</font>...check this steps If your phone doesn’t boot into download mode..<br />
<br />
Step 1 – Prepare odin with the firmware u want to flash (go and find firmware in samobile.com and use odin 3.75 ==>its in my skydrive:laugh: )<br />
<br />
Step 2 – Remove battery and connect your galaxy acei to the computer;<br />
<br />
Step 3 -- Insert battery holding Volume down + Power + Home<br />
<br />
Step 4 – At this point Odin should have detected your SG Acei ( Yellow rectangle should appear);<br />
<br />
Step 5 – Click Start button in Odin and wait about 5 min.<br />
<br />
If all goes well it should come back to life.
Click to expand...
Click to collapse
<br />
<br />
Hi Thank you<br />
<br />
Think maybe it's hard bricked? Will not go into download at all. Followed all the above steps. When I put the cable in with no battery and hold volume and power buttons the computer registers something is plugged in with tudung sound however almost instantly disconnects it with dutung sound. Odin doesn't get a chance to detect my ace. <br />
<br />
Any further suggestions?
Click to expand...
Click to collapse
Maybe the drivers are the problem..use somether samsung usb drivers
Sent from my GT-S5830i using xda app-developers app
ekaekar said:
Hi Thank you
When I put the cable in with no battery and hold volume and power buttons the computer registers something is plugged in with tudung sound however almost instantly disconnects it with dutung sound. Odin doesn't get a chance to detect my ace.
Any further suggestions?
Click to expand...
Click to collapse
I suggest unistalling, cleaning traces of your current Samsung Mobile phone Driver, then re-installing a clean driver from the below link. The fact that Windows detects your phone for a second or so confirms that it is detectable.
http://forum.xda-developers.com/showthread.php?p=11633550
Once this is please confirm back to us if Windows detects your phone.
try this
ekaekar said:
Hi Thank you
Think maybe it's hard bricked? Will not go into download at all. Followed all the above steps. When I put the cable in with no battery and hold volume and power buttons the computer registers something is plugged in with tudung sound however almost instantly disconnects it with dutung sound. Odin doesn't get a chance to detect my ace.
Any further suggestions?
Click to expand...
Click to collapse
seems its driver problem..download drivers from http://forum.xda-developers.com/showthread.php?p=11633550
if still no luck..samsung care waiting for u sorry
Viprdxd said:
I suggest unistalling, cleaning traces of your current Samsung Mobile phone Driver, then re-installing a clean driver from the below link. The fact that Windows detects your phone for a second or so confirms that it is detectable.
http://forum.xda-developers.com/showthread.php?p=11633550
Once this is please confirm back to us if Windows detects your phone.
Click to expand...
Click to collapse
Hi Thanks for the advice,
Installed the new driver however still getting same outcome as before :/
bro i had also bricked my cell and wasnt able to go to download mode.......just connect the cable to pc n then try by power(up+volume down) it works....for soft brick!
odin 3.75?? where??
i also have odin.. idin 3.07
Friend,
I had similar experience, my phone doesn't show GT -S5830i boot menu, no recovery mode, no screen activity on download mode (Odin). But odin in my PC detects com port correctly when connected via USB and pressing [volume+ volume- power button ]
But I finally managed to flash via Odin and my phone worked properly.
I'll give you that Odin package and PDA, modem, csc files after uploading to share site.
Don't worry, this is an Android community, we are all ready to help you.
Sent from my GT-S5830i using xda app-developers app
brijeshep said:
Friend,
I had similar experience, my phone doesn't show GT -S5830i boot menu, no recovery mode, no screen activity on download mode (Odin). But odin in my PC detects com port correctly when connected via USB and pressing [volume+ volume- power button ]
But I finally managed to flash via Odin and my phone worked properly.
I'll give you that Odin package and PDA, modem, csc files after uploading to share site.
Don't worry, this is an Android community, we are all ready to help you.
Sent from my GT-S5830i using xda app-developers app
Click to expand...
Click to collapse
sometimes it will blank screen when go to download mode when we already flash custom rom then want to flash stock rom back. just try to plug in usb cable and open odin. see, if it detect or not.. is that right?
brijeshep said:
Friend,
I had similar experience, my phone doesn't show GT -S5830i boot menu, no recovery mode, no screen activity on download mode (Odin). But odin in my PC detects com port correctly when connected via USB and pressing [volume+ volume- power button ]
But I finally managed to flash via Odin and my phone worked properly.
I'll give you that Odin package and PDA, modem, csc files after uploading to share site.
Don't worry, this is an Android community, we are all ready to help you.
Sent from my GT-S5830i using xda app-developers app
Click to expand...
Click to collapse
thank you look forward to files. however odin in my pc doesn't detect port when connected to usb for me..
ekaekar said:
thank you look forward to files. however odin in my pc doesn't detect port when connected to usb for me..
Click to expand...
Click to collapse
are u already install samsung kies/samsung usb driver?
Related
i just upgrade my 2.1 into Cognition using rom manger
after installing i got a black screen with a blue text writing "NOW REBOOT"
nothing happened so i pushed the power button,since then nothing happened.
the phone dont response to nothing the screen is black like the phone is off.
i tried to go into download mode in order to use "one click odin" but nothing happens,the odin dont recognize the device and i get now picture while i am trying to get into the mode.
when i just got the phone i couldnt get into the recovery mode with the combination keys.seems like my phone dont response to any key combination.
and the biggest problem that i live in Israel and i dont have the option to replace it or something like that.
please,if can some1 root me what to do.
thanks .!
so i checked around here and i saw that device that cannot enter downloadmode using combination keys should use homemade 301k usb cable..
i checked the guide how to make 1 but it seems like very complicated action
can i buy it somewhere?
does any 1 want to make me 1 and i will pay him via paypal?
i upgraded as well and got the black screen and blue text it took so time but reboot. Did you try to get in download mode using sdk/adb ?
so i didnt wait enough and restart by pressing the power button.now i stock with a dead phone.
i cant use adb shell beacuse my computer dont recognize the phone nothing happens when i plug the usb.
yeah dude it looks that way maybe you should look around on how to unbrick i really dont know im kinda new to this all i do is read have much as i can on here and try not to mess mty phone up so far ive been doing a good job
got the same issue .. and the problem is that it's not mine .. it's my friend's phone :'(
any solution plzzz !!
Everyone having this problem needs to look up Odin and read.
Captivate
Cog 2.4
mcord11758 said:
Everyone having this problem needs to look up Odin and read.
Captivate
Cog 2.4
Click to expand...
Click to collapse
I didn't find any useful info .. could please please .. help us out !
AhmadAlmousa said:
I didn't find any useful info .. could please please .. help us out !
Click to expand...
Click to collapse
I wish I was qualified to help you. There are several seperate ways to induce your phone into download mode with Odin and.revert back to stock. If I am reading the post here correct your phones do not even power on.
People have recovered from this state using Odin. I have never had to so I am not able to spell out the steps.
Captivate
Cog 2.4
mcord11758 said:
I wish I was qualified to help you. There are several seperate ways to induce your phone into download mode with Odin and.revert back to stock. If I am reading the post here correct your phones do not even power on.
People have recovered from this state using Odin. I have never had to so I am not able to spell out the steps.
Captivate
Cog 2.4
Click to expand...
Click to collapse
yeah .. all you have to do is pull out your battery and reinsert it then hold both of the vol buttons and plug the usb cable ..
or the other combinations ... I tried all of those .. but nothing at all .. the phone is just a rock !
thnx though !
http://forum.xda-developers.com/showthread.php?t=731989&highlight=odin+click
Captivate
Cog 2.4
AhmadAlmousa said:
yeah .. all you have to do is pull out your battery and reinsert it then hold both of the vol buttons and plug the usb cable ..
or the other combinations ... I tried all of those .. but nothing at all .. the phone is just a rock !
thnx though !
Click to expand...
Click to collapse
2 other small things to try
1 make sure USB is in rear port
2 I believe some have had success by right clicking Odin then selecting run as administrator. Then follow steps
Captivate
Cog 2.4
My phone is also stuck in this state (i.e. the phone won't turn on or respond to button presses or inserting usb cords). I'm not sure if Odin can fix that.
To all with this issue. Try Odin. Make sure you right click Odin and make administrator. Follow steps for Odin. It has worked for others. Make sure you are using the rear USB port. I may have this sequence off so search and make sure.it is right. Open Odin pull battery and sim put battery back in. Hold volume up and down. Plug in USB.
Captivate
Cog 2.4
I had the same issue. Use odin. Hold both volume keys down and plug in the usb to your phone. You may have to hold it longer than normal. Sometimes the download screen does come on but odin will recognize it. Restore it and you should be okay.
Sent from my GT-I9000 using XDA App
darron2k3 said:
I had the same issue. Use odin. Hold both volume keys down and plug in the usb to your phone. You may have to hold it longer than normal. Sometimes the download screen does come on but odin will recognize it. Restore it and you should be okay.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
I tried that already. The computer don't even recognize if there's any device plugged into it. I guess it has to be sent to Samsung
Mine was dead like yours with the black screen. My computer wouldnt recognize it. They have a post in general or Q&A where someone had the same issue as yours. I think is titled "Help". I was thinking the same thing that I would have to sent it in but it worked.
Black Screen / RST_STATUS 0x0
Procedure:
1. Remove the battery, external SD card and SIM card.
2. Wait 10 seconds.
3. Open odin3
4. Connect usb cable.
5. Hold volume up + volume down + Power.
6. Insert battery.
7. Release POWER BUTTON ONLY.
Sent from my GT-I9000 using XDA App
Vol up down and power? i would say just vol up and down (for download mode )
darron2k3 said:
Mine was dead like yours with the black screen. My computer wouldnt recognize it. They have a post in general or Q&A where someone had the same issue as yours. I think is titled "Help". I was thinking the same thing that I would have to sent it in but it worked.
Black Screen / RST_STATUS 0x0
Procedure:
1. Remove the battery, external SD card and SIM card.
2. Wait 10 seconds.
3. Open odin3
4. Connect usb cable.
5. Hold volume up + volume down + Power.
6. Insert battery.
7. Release POWER BUTTON ONLY.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
tried both solutions .. nothing at all !
I guess the galaxy s finally has been bricked by a software failure
AhmadAlmousa said:
tried both solutions .. nothing at all !
I guess the galaxy s finally has been bricked by a software failure
Click to expand...
Click to collapse
you should try my method just figured out today here is the link:
http://forum.xda-developers.com/forumdisplay.php?f=704
I used odin 1 click to get phone back to stock . Now my phone will not go into dl mode with any of the button combos.Also i can not get into recovery.Other than those 2 things the phone boots up and works.Any help please..
Which Odin one click ? And what were you running before you did the one click?
Use a jig for dl mode.
You tried Vol Down-Power and then after the splash screen releasing the power button and continuing to hold Vol Down.
Does your phone fully boot? If it does and you have adb on your computer. Turn on USB debugging, connect the phone to your computer via USB, and then use the command 'adb reboot download' without the '
Hope that works for you.
I used odin 1 click flashed phone back to eclair 2.1 I897UCJF6..The phone will boot into eclair and function properly but i cant get to dl mode or recovery.thanks for the responses
Its risky but IF YOU ARE ON 2.1 YOU CAN FLASH THE 3 BUTTON FIX, or flash i897 gingerbread bootloaders, but DO NOT FLASH THE 3 BUTTON FIX AFTER FLASHING THE GINGERBREAD BOOTLOADERS OR YOU WILL BE HARD BRICKED YOU HAVE BEEN WARNED!!!!!!
Sent from my SAMSUNG-SGH-I897 using XDA App
holeindalip said:
Its risky but IF YOU ARE ON 2.1 YOU CAN FLASH THE 3 BUTTON FIX, or flash i897 gingerbread bootloaders, but DO NOT FLASH THE 3 BUTTON FIX AFTER FLASHING THE GINGERBREAD BOOTLOADERS OR YOU WILL BE HARD BRICKED YOU HAVE BEEN WARNED!!!!!!
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
I would recommend i897 GB bootloaders instead of the 3 button fix. It still fixes the button problem, but never, never, never flash the 3 button fix after flashing GB bootloaders. You have been warned again.
ok finally got into dl mode but when i plugged phone up to usb it went to the phone ! computer screen what do I do.Thanks in advance..
jnblackmon30 said:
ok finally got into dl mode but when i plugged phone up to usb it went to the phone ! computer screen what do I do.Thanks in advance..
Click to expand...
Click to collapse
Does Odin recognize the phone? If so, just flash from there.
odin will not recognize.Any sugestions? Thanks
will a jig get me to d/l mode from here?
jnblackmon30 said:
odin will not recognize.Any sugestions? Thanks
will a jig get me to d/l mode from here?
Click to expand...
Click to collapse
It should. Also, hold volume up + down, then plug in USB should also. Before you try that, restart your computer and pull the battery on the phone for a couple minutes before trying again. Have Odin open before you plug in the phone. Make sure you are using a pry on the back of the computer ( #1 on a laptop).
Followed ur directions still no go.You have any other ideas without a jig?Thanks
jnblackmon30 said:
Followed ur directions still no go.You have any other ideas without a jig?Thanks
Click to expand...
Click to collapse
No. I used a jig last time it happened to me. They only cost about $10.
thanks for all your help.I ordered 1 from ebay...thanks again
No problem. Hope you get it.
Have you tried adb?
Sent from my SAMSUNG-SGH-I897 using XDA App
jnblackmon30 said:
ok finally got into dl mode but when i plugged phone up to usb it went to the phone ! computer screen what do I do.Thanks in advance..
Click to expand...
Click to collapse
I had this a cpl of times, u'll have to reinstall drivers (uninstall first) ,or I use kies mini to reinstall drivers all the time when the pc won't recognize it (this usually happens after switching bootloaders), reboot ur pc and after that ur pc should pick it up (found new hardware). Once the drivers are loaded head back to odin and this time ur com port should light up.
Try this method for download mode... It's worked on every build captivate I've tried, even the fabled 1008 build.
1. Turn off phone, pull battery, sim card, sd card
2. Open ODIN (optional)
3. Plug in USB, then hold both volume buttons (NOT power button)
4. Re-insert battery while still holding volume buttons.
Phone should instantly boot into download mode
hi,
by mistake i closed odin during update
now the device not turn on !!!
i tried to press vol- and power and vol+ and power nothing happened.
and windows not detect the device.
please help...
what should i do to bring it back to life
maalzaben said:
hi,
by mistake i closed odin during update
now the device not turn on !!!
i tried to press vol- and power and vol+ and power nothing happened.
and windows not detect the device.
please help...
what should i do to bring it back to life
Click to expand...
Click to collapse
Try to charge it fo about 4 hours first. See if you can see the battery icon during charging.
Meanwhile, could you tell us the chronological detail of what happened?
1. What type of G-Tab do you have? P1000? GSM/CDMA?
2. What firmware/kernel did you have before flashing? and what were you trying to flash using ODIN?
Which step were you in when you accidentally close ODIN?
can you explain in more detail?
yappoe said:
Try to charge it fo about 4 hours first. See if you can see the battery icon during charging.
Meanwhile, could you tell us the chronological detail of what happened?
1. What type of G-Tab do you have? P1000? GSM/CDMA?
2. What firmware/kernel did you have before flashing? and what were you trying to flash using ODIN?
Which step were you in when you accidentally close ODIN?
Click to expand...
Click to collapse
it's GT-P1000 not sure about GSM OR CDMA.
before flashing:
2.3.3
P1000JPJPC
and i tried to flash with the same P1000JPJPC.
it is same this model
this is what i know
maalzaben said:
it's GT-P1000 not sure about GSM OR CDMA.
before flashing:
2.3.3
P1000JPJPC
and i tried to flash with the same P1000JPJPC.
it is same this model
this is what i know
Click to expand...
Click to collapse
If you had JPJPC, then your G-Tab is GSM P1000.
well, with this limited amount of information can't help you much, but, try these steps first:
1. Charge your G-tab by charger for about 4 hours. (Please let us know if you get battery icon while charging.. But continue charge your G-tab for 4 hours even if you do not see any battery icon).
2. If after charging you can go to download mode (Power+Volume down), than great. Continue just flash as you were but be more careful.
if after charging you still can't go to download mode, then try do this:
a. On your computer, start ODIN.
b. Connect your Gtab to PC using USB Connection.
c. While connected, press the POWER + VOLUME DOWN button for about 5
seconds then release. See if ODIN can detect your device.
If after you did these steps ODIN can detect your device, go ahead flash your G-tab with the ROM you were flashing, even if you can't see anything on your screen.
If that doesn't work, post again, we'll try something else.
See this guide for references that you think may help you too:
http://forum.xda-developers.com/showthread.php?t=1133590
Note (if works after step 2):
you can download any official firmware at http://fus.nanzen.se/
1. Download Check Fus Downloader 2.1
Open Check Fus Downloader, and select the correct model of your G-Tab, choose a Firmware for your region. It will automatically decode the .enc2 file to.zip file
2. Extract the .zip file generated from decoding file to a folder and you will get
tar.md 5 file.
3. Start Odin - put the .md5 to PDA and leave everything else as is.
4. Go to download mode on the G-tab (Power + Volume down) - connect to your computer.
and click start. It takes about 6 to 7 minutes to do the flashing.
Can't guarentee if it would work, but good luck.
yappoe said:
If you had JPJPC, then your G-Tab is GSM P1000.
well, with this limited amount of information can't help you much, but, try these steps first:
1. Charge your G-tab by charger for about 4 hours. (Please let us know if you get battery icon while charging.. But continue charge your G-tab for 4 hours even if you do not see any battery icon).
2. If after charging you can go to download mode (Power+Volume down), than great. Continue just flash as you were but be more careful.
if after charging you still can't go to download mode, then try do this:
a. On your computer, start ODIN.
b. Connect your Gtab to PC using USB Connection.
c. While connected, press the POWER + VOLUME DOWN button for about 5
seconds then release. See if ODIN can detect your device.
If after you did these steps ODIN can detect your device, go ahead flash your G-tab with the ROM you were flashing, even if you can't see anything on your screen.
If that doesn't work, post again, we'll try something else.
See this guide for references that you think may help you too:
http://forum.xda-developers.com/showthread.php?t=1133590
Note (if works after step 2):
you can download any official firmware at http://fus.nanzen.se/
1. Download Check Fus Downloader 2.1
Open Check Fus Downloader, and select the correct model of your G-Tab, choose a Firmware for your region. It will automatically decode the .enc2 file to.zip file
2. Extract the .zip file generated from decoding file to a folder and you will get
tar.md 5 file.
3. Start Odin - put the .md5 to PDA and leave everything else as is.
4. Go to download mode on the G-tab (Power + Volume down) - connect to your computer.
and click start. It takes about 6 to 7 minutes to do the flashing.
Can't guarentee if it would work, but good luck.
Click to expand...
Click to collapse
I charged it 4 hours and no battery icon
ODIN can't detect my device!!!
when in connect it to usb message showed up:
please see attachment
it seems your device has got stuck in are S5PC110 development mode
Have a read here:
http://forum.xda-developers.com/showthread.php?t=1257434
kaanoglu said:
it seems your device has got stuck in are S5PC110 development mode
Have a read here:
http://forum.xda-developers.com/showthread.php?t=1257434
Click to expand...
Click to collapse
Yeap, seems like you 'bricked' ur G-tab. Please follow the following thread CAREFULLY. It looks hard and messy, but its actually not that bad.
http://forum.xda-developers.com/showthread.php?t=1312391
Good luck.
Well Done!
Thank U both of you [yappoe ] & [kaanoglu]
Now my Tab back again to Life
Good experience
hello, which one works on you? i tried to flash GT-P1000 using Odin, it completed successfully but my tab doesn't turned on. I tried charging for 4 hours with no battery charging icon.
gambitr7 said:
hello, which one works on you? i tried to flash GT-P1000 using Odin, it completed successfully but my tab doesn't turned on. I tried charging for 4 hours with no battery charging icon.
Click to expand...
Click to collapse
It is possible u flashedd the wrong ROM or kernel that sgould not be used for your device. Although you have a blank screen, see if odin can recognize your tab.
Plug your gtab to the computer, start odin, press volume down+power button for 5 seconds. If odin still can see you than flash a rom following the check fus instruction above.
help me
My gtab doesn't power on.I flashed p1000xxjq1.When power on stop at samsung logo and run run run.
achaa said:
My gtab doesn't power on.I flashed p1000xxjq1.When power on stop at samsung logo and run run run.
Click to expand...
Click to collapse
Plug your gtab to the computer, start odin, press volume down+power button for 5 seconds. If odin still can see you than flash a ROM.
gambitr7 said:
hello, which one works on you? i tried to flash GT-P1000 using Odin, it completed successfully but my tab doesn't turned on. I tried charging for 4 hours with no battery charging icon.
Click to expand...
Click to collapse
I followed the procedure but ma phone is not coming to home screen just that samsung gloing logo comin up.
Pls tell me wat to do next.
When i activate recovery mode and chose to proceed flah from internal storage it shows Cant mount sdcard.
Choose external?
It might get swapped around
Sent from my GT-I9300 using xda app-developers app
my device just now also cant turn on.but my home button had light when i touched the screen.i charged for 4hours ++ without battery charging icon.and after finish charging i try power+ vol down.screen still black.but had light on home button.and i tried power + vol up.luckily my tab working back in CWM recovery mode.stuck on recovery for a while because when i press reboot its keep coming back to recovery.but at last the tab working with 40% power and hopefully its will working like charm.my solution is charging for 4hours and try open it back.
maalzaben said:
I charged it 4 hours and no battery icon
ODIN can't detect my device!!!
when in connect it to usb message showed up:
please see attachment
Click to expand...
Click to collapse
i have a same problem, when i charge it, it turn the screen like the attachment... then when i connect the usb the screen turn blank, also odin cannot detect my device..
safffwan said:
i have a same problem, when i charge it, it turn the screen like the attachment
Click to expand...
Click to collapse
Your tab is in download mode. If you can't update your tab with odin, then try with heimdall.
glussier said:
Your tab is in download mode. If you can't update your tab with odin, then try with heimdall.
Click to expand...
Click to collapse
either of them can detect my device. the screen only turn like that when i charge it, when i unplug it, it turn off and cannot turn on even i press home+vol down button
I know what it does. If you plug your device via usb, eventually, the screen will turn on, and you'll be able to flash your device via Odin or Heimdall. The difference between the usb port and the charger, is that the usb port only gives the tab 500mA of power, the charger gives the tab 2000mA.
Hey guys,
I been looking for past few hours in this forum to find answers but cant.
Here is my problem.
Samsung Galaxy Note will not power on
It will go to download mode by pressing Vol down+home button and Power button.
I tried flashing few roms with Odin, seems to be all goes fine, but as soon phone restarts it stays on Samsung Galaxy Note screen. Also I get USB Not recognised on my PC when phone stack Samsung Galaxy Note screen.
Can please someone kindly explain to me step by step what to do to get it working.
bakili said:
Hey guys,
I been looking for past few hours in this forum to find answers but cant.
Here is my problem.
Samsung Galaxy Note will not power on
It will go to download mode by pressing Vol down+home button and Power button.
I tried flashing few roms with Odin, seems to be all goes fine, but as soon phone restarts it stays on Samsung Galaxy Note screen. Also I get USB Not recognised on my PC when phone stack Samsung Galaxy Note screen.
Can please someone kindly explain to me step by step what to do to get it working.
Click to expand...
Click to collapse
Flash abyss kernel. Get into abyss kernel by reboot into recovery and do a full wipe (wipe data/factory reset, wipe cache and wipe dalvik) then flash a rom of your choice.
Thanks
Can you give me link to abyss kernel please :good:
Sorry, also how to flash kernel
Sorry for many questions, i am new to this, but learning fast
If you are flashing in Odin bare in mind there are 2 pit files one for the 16gb and one for the 32gb versions of the phone. It wont boot if youve used the wrong pit file
Sent from my GT-N7000 using xda premium
I tried every possible option
Flashed abyss kernel
Flashed stock firmware
Flashed pit file
Still same as soon it boots in Galaxy Note screen i get error USB not recognised, cant access in to recovery also
It is same as mine....but after installing stock rom i just went to the phone recovery mode and wipe data & all that....then my phn restarted well...so i suggest u the same....;-)
Sent from my GT-S5570 using Tapatalk 2
Which stock firmware r u loading?
Sent from my GT-N7000 using xda premium
Rohan Pujari said:
It is same as mine....but after installing stock rom i just went to the phone recovery mode and wipe data & all that....then my phn restarted well...so i suggest u the same....;-)
Sent from my GT-S5570 using Tapatalk 2
Click to expand...
Click to collapse
I cant still enter in recovery mode
can enter download but not recovery
This what i flashed
CODE_N7000XXLC1_CL1003701_REV02_user_low_ship.tar
Dont know what to do with this files?
GT-N7000-MULTI-CSC-OXALC1.tar
MODEM_N7000XXLB2_REV_05_CL1106002.tar
bakili said:
I tried every possible option
Flashed abyss kernel
Flashed stock firmware
Flashed pit file
Still same as soon it boots in Galaxy Note screen i get error USB not recognised, cant access in to recovery also
Click to expand...
Click to collapse
Power off your Note.
Hold Volume down & Home & press Power button. Then when you see the Samsung logo, let go of the Power button. Your phone will boot into Odin/download mode. Press Volume up when asked to. Now you are in download mode.
Connect your phone with usb cable to your computer.
On your computer, run PC Odin. You should see a yellow highlighted COM sign. If you don’t, download Samsung Kies and install it. Then plug-out and plug-in the micro-USB cable to your Galaxy Note and you should see it.
Then click on PDA, and select the pit file then press start.
Sir my advice go to dr ketans thread find pre rooted gb rom for your country start from the begining flash it via pc odin be patient read everything carefully... It is described there...
Sent from my GT-N7000 using xda premium
tknguyencsu said:
Power off your Note.
Hold Volume down & Home & press Power button. Then when you see the Samsung logo, let go of the Power button. Your phone will boot into Odin/download mode. Press Volume up when asked to. Now you are in download mode.
Connect your phone with usb cable to your computer.
On your computer, run PC Odin. You should see a yellow highlighted COM sign. If you don’t, download Samsung Kies and install it. Then plug-out and plug-in the micro-USB cable to your Galaxy Note and you should see it.
Then click on PDA, and select the pit file then press start.
Click to expand...
Click to collapse
Bit confused buddy, as i cant see any pit files when click on PDA
I can see pit files only when I click on PIT
If its helps
In download mode
On top left corner it says
Product Name: GT-N7000
Custom Binary Download:No
Current Binary:Samsung Official
Then i suggest u to go to the service centre...;-)
Sent from my GT-S5570 using Tapatalk 2
There are lots of videos on youtube about pc odin
Shows what to do exactly try it
Sent from my GT-N7000 using xda premium
bakili said:
Bit confused buddy, as i cant see any pit files when click on PDA
I can see pit files only when I click on PIT
Click to expand...
Click to collapse
I think its because of selection there about partition or something like that
Sent from my GT-N7000 using xda premium
Will try later flash GB Rom
Bit strange , no errors when flashing , only when restarts after Odin flash my pc won't recognise usb drives
How to flash stock recovery?
Thanks for advice guys.
Sent from my GT-I9300 using Tapatalk 2
Tried GB stock rom, same installs fine through odin, but when phone restarts Samsung Galaxy Note starts up few seconds later get error on my pc that USB device not recognised
Also when connected with usb to pc, i have empty battery image on phone with circle in the middle
bakili said:
Tried GB stock rom, same installs fine through odin, but when phone restarts Samsung Galaxy Note starts up few seconds later get error on my pc that USB device not recognised
Also when connected with usb to pc, i have empty battery image on phone with circle in the middle
Click to expand...
Click to collapse
Change USB port, if not try having another cable.
Still not working? Hope phone's port is ok and not broken.
Sent from my GT-N7000 using Tapatalk 2
Hi guys,
My phone is soft bricked. I can't access download mode. How to flash a stock rom without Odin ?
I've forgotten to add... My phone is a GT-S5830i !
pymanavichal said:
I've forgotten to add... My phone is a GT-S5830i !
Click to expand...
Click to collapse
This is for S5830 but u can try:
Step 1 – Prepare Odin with the firmware You want to flash and get it ready to Go.
Step 2 – Remove battery, SIM and SD card, next connect your galaxy ace to the computer;
Step 3 – Hold Volume down + Power + Home button at the same time;
Step 4 – Insert the battery and wait a bit;
Step 5 – At this point Odin should have detected your Samsung Galaxy ( Yellow rectangle should appear);
Step 6 – Click Start button in Odin and wait about 5 min.
If You do All Above Steps Correctly Then It should come back to life.
Jonny_Brravo said:
This is for S5830 but u can try:
Step 1 – Prepare Odin with the firmware You want to flash and get it ready to Go.
Step 2 – Remove battery, SIM and SD card, next connect your galaxy ace to the computer;
Step 3 – Hold Volume down + Power + Home button at the same time;
Step 4 – Insert the battery and wait a bit;
Step 5 – At this point Odin should have detected your Samsung Galaxy ( Yellow rectangle should appear);
Step 6 – Click Start button in Odin and wait about 5 min.
If You do All Above Steps Correctly Then It should come back to life.
Click to expand...
Click to collapse
Doesn't work for me !
Odin detected my phone (yellow rectangle appeared) but stucked at setupConnection...
How do you know your phone is softbricked if you cant get in downloadmode?
Sent from my ace, shall I but say (√π).
I thought when you can't get in download mode the device is soft bricked. Am I wrong ?
Does it start? Or something like that? Bootlogo for example?
Sent from my ace, shall I but say (√π).
Yes, it does. It works correctly except download mode that is unreachable. This prevents me to flash a stock rom. And that's just what I want to do !
Everything is OK. I've found the solution here : http://forum.xda-developers.com/showthread.php?t=1642686
try to use usb jig to get into download mode
pymanavichal said:
Hi guys,
My phone is soft bricked. I can't access download mode. How to flash a stock rom without Odin ?
Click to expand...
Click to collapse
Go to Samsung service center and act dumb. Don't mention 'brick','root','custom ROM','download mode','custom recovery'.
Tell them you were downloading some random games over Wifi when suddenly your phone switched off... I'll leave the rest of the story to you
Rishabh13 said:
Go to Samsung service center and act dumb. Don't mention 'brick','root','custom ROM','download mode','custom recovery'.
Tell them you were downloading some random games over Wifi when suddenly your phone switched off... I'll leave the rest of the story to you
Click to expand...
Click to collapse
OMG read , he fixed it already -.-
Sent from my GT-S5830 using xda premium