i try to install v 20G with smart flash and after the phone was connected start to loading ...
after 3-4 sec was disconnected and now is dead
is not connecting with USB, not start with charger ...
how can resolve this?
thank you
Wrong subforum.
sorry, please a moder to move it ...
If you flashed it with battery inside, you should be able to enter in S/W mode and reflash it but if you flashed without battery you have probably bricked it.It's also possible a hardware failure, like the motherboard.
i flashed with battery inside... allways i do this ... but this time not work ...
yonelkent said:
i flashed with battery inside... allways i do this ... but this time not work ...
Click to expand...
Click to collapse
It enters in S/W mode if you plugg it again?If not, could very much be a hardware failure.
No, it won't start ...
yonelkent said:
No, it won't start ...
Click to expand...
Click to collapse
This means hard brick or hardware failure.Take it to the service.
damn ...
try to see if atleast your pc recognises it in computer management
doesn't recognized ... i try on other pc and nothing ...
well then i guess your warranty card is your friend
was ... because i haven't ...
i guess now you should try to search the web or send it for repairs :/
Thread moved. In future if you post in the wrong forum, just use the report button at the top right of your post and ask for it to be moved as will be much quicker for us to get to.
Thanks
AvRS
Probably when you start the flashing with smart flash tool at the first second you move or touch your phone and usb connection cutted sft writing bootloader unfortunately.Before flash your phone put your phone a constant can not move and dont touch your usb cable and phone until flashing finish.
George Jetson said:
Probably when you start the flashing with smart flash tool at the first second you move or touch your phone and usb connection cutted sft writing bootloader unfortunately.Before flash your phone put your phone a constant can not move and dont touch your usb cable and phone until flashing finish.
Click to expand...
Click to collapse
that was the problem ... i have a very long USB and i think i touch him ... :| i was to service and they told me is dead because i start flashing with low voltage ... under 3 V ... They can make with JTAG , for rewrite boot or another thing on motherboard .
now i hope to be fine ...
Related
Hi all kind bros and sis,
Please help me out as I think I've really bricked my less than 2 months brand new Optimus 2X..
You see.. I rooted my P990 using unlock root and chanced upon CM7 and thought of giving it a try. I installed clockworkmod and downloaded the stable release of 7.1 for Optimus 2x.. following the instruction to do a Nandroid backup and proceeded with the Mod..
Not knowing that I need to wipe everything including data.. I just selected the Dalvik cache wipe and proceed with the mod. The process went for more than 15mins and I saw some graphics (the android figure going round and round) but it just stuck there... the screen went blank and when I touched those home or back buttons.. they will lighted but nothing happens. I can't power it off also. So I manually took out the battery and put it back before powering up again. The android picture appeared again briefly for about 1 min and just hanged there. I took out the battery again and this time it was dead.. no matter what I press : vol + and power buttons together; home+Vol+ + power down; Vol- + power down.. all those do not revive the phone.
I tried taking out the external SD card and try powering up. The LG logo appeared and got stuck there.
I searched on Google and found the smartflashtool. I tried that and managed to install the NVidia boot recovery driver and stuff correct. Hold the vol+ button and power key before plugging in but the smarttool did not find the com port or communication driver whatever so I couldn't flash it back to stock.
I'm very desperate and stuck now... did I just accidentally burned the board or something? What bad luck I have
If that's the case, will I still be able to bring the phone back to LG service centre and get it repaired?
Please help me.. any kind souls out there. I really liked the phone and hoped to bring it back. else it's such a shortlived phone... really breaks my heart to see this..
Thanks in advance...
humblepie88 said:
Hi all kind bros and sis,
Please help me out as I think I've really bricked my less than 2 months brand new Optimus 2X..
You see.. I rooted my P990 using unlock root and chanced upon CM7 and thought of giving it a try. I installed clockworkmod and downloaded the stable release of 7.1 for Optimus 2x.. following the instruction to do a Nandroid backup and proceeded with the Mod..
Not knowing that I need to wipe everything including data.. I just selected the Dalvik cache wipe and proceed with the mod. The process went for more than 15mins and I saw some graphics (the android figure going round and round) but it just stuck there... the screen went blank and when I touched those home or back buttons.. they will lighted but nothing happens. I can't power it off also. So I manually took out the battery and put it back before powering up again. The android picture appeared again briefly for about 1 min and just hanged there. I took out the battery again and this time it was dead.. no matter what I press : vol + and power buttons together; home+Vol+ + power down; Vol- + power down.. all those do not revive the phone.
I tried taking out the external SD card and try powering up. The LG logo appeared and got stuck there.
I searched on Google and found the smartflashtool. I tried that and managed to install the NVidia boot recovery driver and stuff correct. Hold the vol+ button and power key before plugging in but the smarttool did not find the com port or communication driver whatever so I couldn't flash it back to stock.
I'm very desperate and stuck now... did I just accidentally burned the board or something? What bad luck I have
If that's the case, will I still be able to bring the phone back to LG service centre and get it repaired?
Please help me.. any kind souls out there. I really liked the phone and hoped to bring it back. else it's such a shortlived phone... really breaks my heart to see this..
Thanks in advance...
Click to expand...
Click to collapse
Try using SmartFlashTool, download the LG stock ROM (can be found here in XDA forum, i'll help you find the link), flash the .bin and .fls files.
humblepie88 said:
Please help me out as I think I've really bricked my less than 2 months brand new Optimus 2X..
...
"Hold the vol+ button and power key before plugging in but the smarttool did not find the com port..."
Click to expand...
Click to collapse
Turn off the phone. Hold Vol-DOWN while plugging it in. Start Smartflash and see the com-ports magically appear.
Follow trymhansen's instructions. He helped me before with my softbricked phone.
I hope you get your O2X back to life! Keep us posted
Best of luck to you!
PS. I also believe you should pull out the battery after turning off the phone in Trym's instructions. Trym correct me if I'm wrong please.
Hi All,
Thanks for your kind replies. I did follow your instruction. Take out the battery (I removed the ext SDcard as well), press and hold -vol and plug in the phone via USB. Afterwhich start up smartflash tool.. still nothing happens and no com ports are found.. The version of smartflashtool that I used is Dec 2010. Do I need to get the latest one and also the LG united drivers installed?
I also tried starting smartflash tool before the sequence.. still the same. BTW.. my OS is Win 7. Is it supported?
Really at my end's wit. Hope I can bring my phone back to life soon and I'm not really bricking it. I heard Samsung phones are not that easy to brick and can get to the recovery mode pretty easily. is it true?
Please help me.. thanks
Hi bros,
Attached are my screenshots from the device manager and smartflash tool... both seems not able to find the phone and allocate a com port. I've tried installing the latest LG mobile driver 3.6 but no help as well
Have you followed instructions as described here http://forum.xda-developers.com/showthread.php?t=1008070 ?
Also, try to attach your phone directly to computer, using usb ports from computer mainboard. I have experienced problems when attaching it via extension usb cord or attaching it to computer case ports. (I hope that you can understand what I have mean to say with usb )
Hi Memhis,
Yes.. I followed exactly the instructions from the thread and I've plugged into a USB port directly to the computer which is one of the ports in front.. not via any extension or USB hub.. still it did not detect.
I'll try to use another computer which is running Win XP and try again. I've downloaded those 3 files from that thread you recommended try using those instead.. hope it can be detected this time else I think I'll have to send to LG service for repair tomorrow.
I've been jailbreaking and modding my Iphone a lot and everytime whenever there's a near brick situation.. I'm able to fix it but not this time with an Android or LG perhaps... I hope I don't have to go to the extend of using ADB low level to push some files which I saw in one of the thread that one of the guys did that.. but I doubt I can since my windows can't even detect the phone!!
Maybe this will be my first and last LG phone if I ever get it repaired...
humblepie88 said:
Hi Memhis,
Yes.. I followed exactly the instructions from the thread and I've plugged into a USB port directly to the computer which is one of the ports in front.. not via any extension or USB hub.. still it did not detect.
I'll try to use another computer which is running Win XP and try again. I've downloaded those 3 files from that thread you recommended try using those instead.. hope it can be detected this time else I think I'll have to send to LG service for repair tomorrow.
I've been jailbreaking and modding my Iphone a lot and everytime whenever there's a near brick situation.. I'm able to fix it but not this time with an Android or LG perhaps... I hope I don't have to go to the extend of using ADB low level to push some files which I saw in one of the thread that one of the guys did that.. but I doubt I can since my windows can't even detect the phone!!
Maybe this will be my first and last LG phone if I ever get it repaired...
Click to expand...
Click to collapse
launch smartflashtool first, extract the .fls and .bin files, hold down volume at the same time plug in the usb port to your comp. you must see a s/w updating logo in your phone's screen and smartflash should detect your phone. then click start!
Sent using a phone.
Hi mrgian,
I just tried to revive my phone by using the same method on a different laptop running on Win XP.. plugged directly to a side USB port but still no luck. There's no s/w updating logo appearing on my phone and smartflashtool also failed to detect my phone. I've found another thread opened by another user and my situation is exactly the same as his :
http://forum.xda-developers.com/showthread.php?t=1161583
But lucky for him is that he's able to get it working after changing to another PC but I've tried 3 different machines and no luck so far...
I'll try to use the NVflash as a last resort and see if I've any luck with NVflash at all.. If it failed again.. I think I've no choice but to send it to the repair centre for servicing then..
humblepie88 said:
Hi mrgian,
I just tried to revive my phone by using the same method on a different laptop running on Win XP.. plugged directly to a side USB port but still no luck. There's no s/w updating logo appearing on my phone and smartflashtool also failed to detect my phone. I've found another thread opened by another user and my situation is exactly the same as his :
http://forum.xda-developers.com/showthread.php?t=1161583
But lucky for him is that he's able to get it working after changing to another PC but I've tried 3 different machines and no luck so far...
I'll try to use the NVflash as a last resort and see if I've any luck with NVflash at all.. If it failed again.. I think I've no choice but to send it to the repair centre for servicing then..
Click to expand...
Click to collapse
does the laptop have lg drivers installed?
Sent using a phone.
inflance hotota
mrgian said:
does the laptop have lg drivers installed?
Sent using a phone.
Click to expand...
Click to collapse
Yes.. I've installed the latest LG united mobile driver version 3.6. Any wrong with that version... Really don't know where / what is missing or my phone is really fried after just one mod attempt?
I've also tried NVflash and it's stuck at the "bootloader initialization" screen....
Nothing appeared on the phone... not even LG logo. Can't believe LG phones are so fragile and unmodifiable
humblepie88 said:
Yes.. I've installed the latest LG united mobile driver version 3.6. Any wrong with that version... Really don't know where / what is missing or my phone is really fried after just one mod attempt?
I've also tried NVflash and it's stuck at the "bootloader initialization" screen....
Nothing appeared on the phone... not even LG logo. Can't believe LG phones are so fragile and unmodifiable
Click to expand...
Click to collapse
can you entet CWM? Press volume down til s/w will appear.
Sent using a phone.
try to charge the battery first...power off your device and charge it...maybe leave it charging for about 1hr even if you dont see anything on the screen( i believe after plugin the charger you will see the charging logo but it will disapear after a few seconds)...after 1 hr unplug and try to check if it will boot to clockwork recovery...if yes then just do complete data wipe...also try installing the ext3 back.zip, it will help delete system files(sometimes CWR is not deleting this)...hope this help
chupi_24 said:
try to charge the battery first...power off your device and charge it...maybe leave it charging for about 1hr even if you dont see anything on the screen( i believe after plugin the charger you will see the charging logo but it will disapear after a few seconds)...after 1 hr unplug and try to check if it will boot to clockwork recovery...if yes then just do complete data wipe...also try installing the ext3 back.zip, it will help delete system files(sometimes CWR is not deleting this)...hope this help
Click to expand...
Click to collapse
you got a point there.
Sent using a phone.
humblepie88 said:
Yes.. I followed exactly the instructions from the thread and I've plugged into a USB port directly to the computer which is one of the ports in front.. not via any extension or USB hub.. still it did not detect.
Click to expand...
Click to collapse
When you say an USB port in the front do you mean an USB in the back? Because the ones in front are the case ones, the ones in the back are the good ones, i.e. the ones that are directly attached to the mobo.
LarsPT said:
When you say an USB port in the front do you mean an USB in the back? Because the ones in front are the case ones, the ones in the back are the good ones, i.e. the ones that are directly attached to the mobo.
Click to expand...
Click to collapse
I've tried the recovery via 2 diff laptops and plugging in directly to one of the side USB ports but to no avail as well.. I think I've plugged in the phone correctly but there's no reaction at all/
mrgian said:
can you entet CWM? Press volume down til s/w will appear.
Sent using a phone.
Click to expand...
Click to collapse
How to enter CWM? I can't even power up the phone and no reaction at all when plugged into USB via smartflash.. the screen remains black. It's liked the whole phone is burned or something... but strange thing is that it can detect APX and asked to install drivers... but after successfully installing the Nvidia boot recovery driver.. the com ports does not get discovered.. What is wrong?
chupi_24 said:
try to charge the battery first...power off your device and charge it...maybe leave it charging for about 1hr even if you dont see anything on the screen( i believe after plugin the charger you will see the charging logo but it will disapear after a few seconds)...after 1 hr unplug and try to check if it will boot to clockwork recovery...if yes then just do complete data wipe...also try installing the ext3 back.zip, it will help delete system files(sometimes CWR is not deleting this)...hope this help
Click to expand...
Click to collapse
I plugged in the phone with battery but there was no charge logo or whatever.. the screen remains blank.. I'll try to leave it charging and see what happens. But I've remembered there was still about 80% power when this disaster happened and I've taken out the battery since.. so the charge should have remain? Btw.. where can I get this ext3 back.zip and how to use it? thanks
Dear fellows,
I need your help. My colleague has some how bricked his Galaxy I9000 device. As per discussion he said he tried to upgrade the rom and accidently the rom he selected for flash via odine was for I9003 which is a variant of Galaxy S line of product.
Now what happened is the phone is completely dead no download mode nothing its all dead. I prepared a USB Jig and plugged in and followed our expert's guidelines but still no success. The device is still dead. One hunch of mine was drained battery and I put it on charging and observed the back (camera side) was slightly heating up when i checked after couple of hour of charging but the situation remained the same.
Any suggestion to recover this device and what has happened to the device? Is the samsung phone are so fragile? Im personally using Xperia X10i and never faced such problem even bricked its all recoverable via software workarounds.
Please suggest
Thanks Faisal
well i dont know if this will help but ill give it a try. when you plug the phone into the computer does the computer recognize the device? if it does see if it recognizes in odin. if thats all good in odin (gives you a port number) then to flash these files http://www.mediafire.com/?34oxweahfpy53dj
just un rar and follow readme. this may not work for you but a while back i hd a simular problem and this is how i fixed it so try it see if it works. If it does hit thanks.
ps this has also worked on different devices with simular problems but i did it with different files(the ones meant for the proper device form samfirmware.com)
Good Luck!
try option bootloader flash in odin, if you flash a firmware package.
should be recoverable for sure
last resort would be Unbrickable mod
the files i posted will flash bootloaders at the sme time. At least thats what i think the sbl file that it flashes is
How can he flash via odin when he can't even get into download mode??
Anyways I think u gotta replace jtag now..
If my post helped, don't mind hitting THANKS
drakester20 said:
How can he flash via odin when he can't even get into download mode??
Anyways I think u gotta replace jtag now..
If my post helped, don't mind hitting THANKS
Click to expand...
Click to collapse
well if you read what i posted i clearly said that i had simular problems, meaning ive been to the point where i couldnt get into dl mode or recovery and that is how i fixed it. heres a example; start to flash via odin and unplug while its flashing. Then try to go into dl mode or recovery. You cant! it scared the crap out of me, so i didnt give up and all i had to do is plug it into the computer and i recognized it in odin. so i flashed and there i had it it was fixed
Thanks for responses
Hi Guys,
thanks for responses but when the device is plugged with PC no activity at all. Fully dead
My colleague acquired repair services and recovered the phone because I dont have JTAG/RIFF with me.
Unbrickable mod was hard to try specially modification by shorting resistors from device motherboard.
Thanks
Faisal
SGS i9000b hard bricked and dead
faisalusuf said:
Hi Guys,
thanks for responses but when the device is plugged with PC no activity at all. Fully dead
My colleague acquired repair services and recovered the phone because I dont have JTAG/RIFF with me.
Unbrickable mod was hard to try specially modification by shorting resistors from device motherboard.
Thanks
Faisal
Click to expand...
Click to collapse
I didnt understand your messege. Whats a JTAG/RIFF. Should I try the USB Jig on mine?
I hard bricked a SGS I9000B and its not even mine, I mean it wont turn on, wont light up the screen, wont give any working sign, when battery is inserted for a long time the phone warms up. 3 buttons wont work, sliding the battery in and pressing 3 buttons also wont work. Should I try the USB JIG?
please help me i have flashed using convert kdz and flashed by SFT.. my phone now not working.. no power any thing... what i do now ???:crying:
remove the battery, enter in s/w update mode and reflash whith SFT but with a good rom.
=> http://forum.xda-developers.com/showthread.php?t=1448803
rom V20O => http://forum.xda-developers.com/showpost.php?p=23788913&postcount=170
But it's not connecting to s/w update mode. No power any more... Pc not detect my phone...
I tried everything.. removed battery and connect phone but nothing happend, just like dead phone.
Sent from my LT18i using Tapatalk 2
jimmysmart83 said:
But it's not connecting to s/w update mode. No power any more... Pc not detect my phone...
I tried everything.. removed battery and connect phone but nothing happend, just like dead phone.
Sent from my LT18i using Tapatalk 2
Click to expand...
Click to collapse
If you really did everything and in a right way, you can start to build a new house because you have the first brick already.But...it's not so easy to brick a phone with SFT.If you really followed the rules for Smart Flash Tool it's practically impossible.I know that people tend to panic in such situations and do something wrong in a rush.Well, take the battery, sim card and memory card out of the phone; hold the volume up button and then plug your usb cable( sure that cable and contacts are okay ), which is pluged in your computer with SFT opened; sometimes the phone enters in s/w mode in a second but sometimes needs five.Then flash a GB rom or anything you want.If nothing will happen is very much possible that you have a hardware problem( something similar happened to me when my motherboard was fu.ked and this is quite common with P970 ).Good luck.:fingers-crossed:
P.S. Are you talking about SE arc or LGE P970?
jimmysmart83 said:
But it's not connecting to s/w update mode. No power any more... Pc not detect my phone...
I tried everything.. removed battery and connect phone but nothing happend, just like dead phone.
Sent from my LT18i using Tapatalk 2
Click to expand...
Click to collapse
Did you maybe flash a wrong ROM? Double check please. Whats the name of your kdz file? Where did you get it from? Did you interupt the update procedure? Or did it get interrupted?
Sent from my LG-P970 using xda app-developers app
Edvin73 said:
If you really did everything and in a right way, you can start to build a new house because you have the first brick already.But...it's not so easy to brick a phone with SFT.If you really followed the rules for Smart Flash Tool it's practically impossible.I know that people tend to panic in such situations and do something wrong in a rush.Well, take the battery, sim card and memory card out of the phone; hold the volume up button and then plug your usb cable( sure that cable and contacts are okay ), which is pluged in your computer with SFT opened; sometimes the phone enters in s/w mode in a second but sometimes needs five.Then flash a GB rom or anything you want.If nothing will happen is very much possible that you have a hardware problem( something similar happened to me when my motherboard was fu.ked and this is quite common with P970 ).Good luck.:fingers-crossed:
P.S. Are you talking about SE arc or LGE P970?
Click to expand...
Click to collapse
maybe something wrong i did but sft tool completed flash my phone i think my kdz file was wrong maybe... i give it to mobile repair center today and he also said that phone is totally dead not detecting to pc, now he will check motherboard... tomorrow i will know...
i am talking about LG P970
anyway i have SE Arc S also.
N00BY0815 said:
Did you maybe flash a wrong ROM? Double check please. Whats the name of your kdz file? Where did you get it from? Did you interupt the update procedure? Or did it get interrupted?
Sent from my LG-P970 using xda app-developers app
Click to expand...
Click to collapse
first time i was flashed stock ROM V10A which downloaded from here But my phone bootloop its only showing LG logo and touch buttons flashing only, so i searched in xda to try another method and i got V10G_00.kdz file from india region and got [TOOL] LGExtract 0.2.1 do it all process i think i lost my recovery or maybe motherboard problem....
anyway if any suggestions please reply...
jimmysmart83 said:
first time i was flashed stock ROM V10A which downloaded from here But my phone bootloop its only showing LG logo and touch buttons flashing only, so i searched in xda to try another method and i got V10G_00.kdz file from india region and got [TOOL] LGExtract 0.2.1 do it all process i think i lost my recovery or maybe motherboard problem....
anyway if any suggestions please reply...
Click to expand...
Click to collapse
Are you sure you used the v10G for P970? Cause otherwise only and interruption could cause such a hard failure...
N00BY0815 said:
Are you sure you used the v10G for P970? Cause otherwise only and interruption could cause such a hard failure...
Click to expand...
Click to collapse
yes m sure.
jimmysmart83 said:
first time i was flashed stock ROM V10A which downloaded from here But my phone bootloop its only showing LG logo and touch buttons flashing only, so i searched in xda to try another method and i got V10G_00.kdz file from india region and got [TOOL] LGExtract 0.2.1 do it all process i think i lost my recovery or maybe motherboard problem....
anyway if any suggestions please reply...
Click to expand...
Click to collapse
Well, the phone goes in bootloop when you flash patched files with recovery and then forget to flash Superuser.You must not boot your phone when it enters in recovery after flashing with SFT but flash Superuser from your SD card first.I think that this maybe was your first problem.But LG logo and flashing leds are also a very possible sign for a faulty motherboard.The same happened to me with one week old P970 with official firmware and not rooted, when I tried just to reboot the thing.And if your phone died after this, you can be 99.9% sure that you have a fu.ked motherboard.
Hello ,
I was flashing my 5830 with CWM then he shuted down while he was fully charged.
I was'nt able to reboot in any way (regular , download, recovery) : my screen is black, not even a little light.
But i plug it into the computer, and this time odin recognised it as 0:[COM17].
I was happy, and i put the firmware from samfirmware, and started flashing.
But he gets stucked at setup connection because he says that he can't open the serial COM port.
What can I do ?
Thanks, Kal.
PS : I need my phone tomorrow :crying: so please answer quickly
Okay,
so in fact it's hardware problem.
The power button as dead.
A store replace it and now it's ok
kal8578 said:
Okay,
so in fact it's hardware problem.
The power button as dead.
A store replace it and now it's ok
Click to expand...
Click to collapse
Good to know the problem is solved
Hi
This morning i charge my phone full. And try to trought MiPphone install a rom. Now i cant turn it on, no recovery, no fastbooth. When i put it in charge it doesent turn the light that he is chargin. I press bottons and hold to enter in recovery and to fastbooth and noting. Please tell me is posiblle to fix and how! ((((
My firends, plese help meee :'((((
I think that is impossibile that it don't turn on in all mode...maybe you had a low battery level when you flash the rom?
simoneluconi said:
I think that is impossibile that it don't turn on in all mode...maybe you had a low battery level when you flash the rom?
Click to expand...
Click to collapse
He have so much battery... :'(
maybe you did the wrong thing in the wrong moment, the phone broke while you were updating. Or try with a different charger
wavexda said:
Hi
This morning i charge my phone full. And try to trought MiPphone install a rom. Now i cant turn it on, no recovery, no fastbooth. When i put it in charge it doesent turn the light that he is chargin. I press bottons and hold to enter in recovery and to fastbooth and noting. Please tell me is posiblle to fix and how! ((((
My firends, plese help meee :'((((
Click to expand...
Click to collapse
if charging doesn't help there is a thread on miui forum but it requires opening the phone(if it's in warranty don't)
quote me if u want the link
anuraag122 said:
if charging doesn't help there is a thread on miui forum but it requires opening the phone(if it's in warranty don't)
quote me if u want the link
Click to expand...
Click to collapse
Thx my firend. Yes I know and I do that. Here is what i posted after wen i finish that method:
After brick my MI3, I use the methodr to fix my phone with wire. I open MI3, put wire on test points and tray to FLASH. But I never finish flash. Then i remove the wire and I make Flash without WIRE
After flash, I have 7 local disk in my computer from MI3. Two local disk are 63.9 MB and they are just free 11.5MB, and other 5 local disk want to do a format disk.
When I back battery I can't turn on my phone, and wont charge. If I put USB in him he will have the same local disk like without battery.What to do?
Now I can do a Flash with, and witout battery. But they are the same problem. PC recognize MI3 but it wont turn ON, won't charge.
What to do now?
Click to expand...
Click to collapse
Service center
in any condition fastboot mode should be open. if not, only possibility low battery. or else service center
try ADB flash..search in google..it may help..if ur pc recognizes ur phone.
Unbrick Completely Dead Mi3 With No Fastboot/Recovery http://en.miui.com/thread-73348-1-1.html
credits to @subhrajitnath