Database Develop

[Q] Bricked Galaxy s

I think that i may of fully bricked my Galaxy s
I cant get into download mode or recovery
I have tried getting into download mode with a usb jig
Also my phone wont even turn on
Is there anything that i can do to make my galaxy s i9000 work again
I DONT want to have to get it repaired

hi dude did u tried to charge the battery
---------- Post added at 08:18 PM ---------- Previous post was at 08:13 PM ----------
if u did use jtag usb to active download mode and flash u re phone using odin
try to flash u re phone using a laptob if it s possible
hope u re phone wake up

Galaxy s
I have tried charging the battery and it didnt work
Tryed getting into download mode by using 3 button combo and a usb jig
I cannot flash with odin because i cannot get odin to recognize my phone due to the fact that it cant get into download mode
Cheers for ur help so far

Try getting a charged battery from someone else? maybe your battery is flat

Galaxy s
tried using a fully charged battery and it still didnt work

how did you do that? I mean, I thought it was nearly impossible to hard brick an Android Smartphone..

What did you try to do? More details would help pinpoint the issue properly.

i done all of this by updating my galaxy s by odin i then accidentilly removed the cable and now my phone is fully bricked. Samsung just say that it is impossible to brick it. They just speak a load of bull****

From what he said on YouTube:
He pulled the wire, accidentally, whilst he was on ODIN flashing back to stock rom...
I have suggested:
-Getting battery out + 3 button combo
-Trying to get into download mode
-Trying a JIG (which he got)
-Trying to get into recovery
I've run out of things to suggest...if anyone else knows more, then please post it for him :/
I'm just surprised the JIG doesn't work.

Which firmware did you flash? Did they have bootloaders?

@dhiru1602 i want to know if there is any methods that u know of that could help me get into download mode or just getting my phone working. I cannot do anything with my phone. I am thinking of sending it in for repair but that will only happen if there is no way of getting my phone to work

@dhiru1602 i flash back to jpx
Cheers totallydubbed for ur help so far
Can u check ur inbox on youtube plz

Answer these questions.
Which firmware were you on?
Which firmware did you flash?
When did the flashing stop? At the very start or sometime during the process?
Are you sure your battery has some charge?
It might be possible that the phone functions but display isn't coming. Have you tried the key combination and checking if the computer recognizes the phone?

Galaxy s
1. i was on Jp6(Froyo)
2. I flashed Jpx
3. The flashing stopped about half way during the process
4. Yes the battery is fully charged
5. How do u do the key combination to see if odin recognizes it ( if u mean the three button combo to get into download mode then Yes)

If the phone is being recognized by the computer then why dont you try a reflash?

Galaxy s
the problem is that i cant get my phone to be recognized by the computer

Repair
I have finally given in so I decided to send it in for repair. Thanks for it help anyway

Calvintown898 said:
I have finally given in so I decided to send it in for repair. Thanks for it help anyway
Click to expand...
Click to collapse
well good luck my man.
Remember flashing is a learning curve, don't take it as bad or anything. it happens to everyone once in a while.
Just remember when in download mode you do not want to do the following:
-Disconnect it
-Have a power cut
USUALLY, a JIG solves issues, even if you had the above two - in your case it didn't

The only thing that I could think of is the bootloader getting corrupt due to which the Download Mode doesn't work.

Brand new phone
I have just got my phone back which was great. it wasnt covered by manufacture warranty but they still done it for free. However they couldnt fix the phone so they gave me a brand new Galaxy s!
Cheers for ur help anyway though

Samsung Galaxy S HARD BRICKED

Hello,
I tried to flash back to the stock ROM of Galaxy S and then install a new Jetpack 8.2 custom ROM.
Apparently, since I did a bad search on the internet on finding a stock ROM and pit file, i downloaded a pack from xda with the .pit file pda file phone file and CSC file.
I DONT REMEMBER which it was..i selected all the files from the pack through odin and re-partitioning was ticked (i saw it after the flash finished).
So when the processes was completed waited a bit and since the phone was not responding i pulled it out.
Now that's it.. The screen is black - wont power on - wont go into download mode - wont show battery charge while the USB cable is on - nothing (AND YES THE BATTERY IF FULLY CHARGED).
Is there anything i can do to fix it?
p.s: havent tried a usb jig but from searches i made on the internet and on xda forums ppl said it will prolly not work. are there any instruction on how to make one (link would be appriciated)?
Thanks in advance

Best option would be to try a Jig (you can buy one on ebay or dealextreme) and see if you can go into DL mode. Sometime the button combination for Download mode changes depending on the firmware. Try pressing the middle of the volume rocker and power at the same time.
If not wait for a Jib or build yourself one. There should be instruction in this forum on how to build one.

if the jig doesn't work, i would try and return it to the store you got it. I know its a long shot, but the same thing happened to me and I brought it back and she just gave me a new phone! Its worth a shot!

evanogrady said:
if the jig doesn't work, i would try and return it to the store you got it. I know its a long shot, but the same thing happened to me and I brought it back and she just gave me a new phone! Its worth a shot!
Click to expand...
Click to collapse
Worth a try. Just tell them it suddenly stopped working and you have no idea what's wrong. It's not like they can power it on and see that you failed flashing it or something. and even if they use a jig they can only get to download mode and reflash it...
even if they say no... a jig costs like $1.5 on eBay. search for "i9000 jig".
Insert if, press the power button and poof, you're in download mode,

the thing is that the phone is not under any warranty or something and the store i got it is far away now !!

JTAG service if you're in the UK: http://www.fonefunshop.co.uk/

The JIG won't work when you brick with a black screen (i.e. bootloader corruption, so no boot at all).
Your only solution is to JTAG it or sadlly, throw it away...

I used a I9003 ROM to flash it !!
Maybe there is still a solution?
also from what i've found on forum sometimes the JIG helped ppl who had a black screen to go into download mode. so how can you be so sure? @ Dan_Aykroyd

immortalcy said:
I used a I9003 ROM to flash it !!
Maybe there is still a solution?
also from what i've found on forum sometimes the JIG helped ppl who had a black screen to go into download mode. so how can you be so sure? @ Dan_Aykroyd
Click to expand...
Click to collapse
As long as your bootloader is intact, the jig will get you to the download mode
Wrongly flashed i9000 with i897 rom has been confirmed to work with the jig, but i don't know i9000 with i9003 rom...
Or you can apply the unbrickable mod if your phone's warranty was voided already, if not, send it back to the shop.

immortalcy said:
Hello,
Now that's it.. The screen is black - wont power on - wont go into download mode - wont show battery charge while the USB cable is on - nothing (AND YES THE BATTERY IF FULLY CHARGED).
Click to expand...
Click to collapse
Had that also yesterday putting a new ROM on my GS. The process of writing the PDA halted.. Black screen, no way to start it up en no screen indications of charging etc..
I removed it from my USB, Removed the battery a few times did the three way download mode trick several times and finally I got the download mode screen from where I successfully loaded the new ROM.
So try a few times.. even when you get a black screen !!

let me be clear once more..i downloaded a complete I9003 rom pack from xda... some guy posted..i just missed that it was I9003 and not I9000..
and on odin re-partition was clicked..but the process was completed successfully even thou after that the phone wont start or go into download mode :/
i used not only PDA and PIT files but 2 more was included as well :/ so what i am asking is if this could really have damaged the bootloader or not

immortalcy said:
I used a I9003 ROM to flash it !!
Maybe there is still a solution?
also from what i've found on forum sometimes the JIG helped ppl who had a black screen to go into download mode. so how can you be so sure? @ Dan_Aykroyd
Click to expand...
Click to collapse
Of course you're bound to brick it flashing a firmware for a phone completely different to yours...get a jig if you're confident or take it to a service centre
Sent from my GT-I9100 using xda premium

dk206 said:
Of course you're bound to brick it flashing a firmware for a phone completely different to yours...get a jig if you're confident or take it to a service centre
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Try jig first.
Next try JTAG or UNBRICKABLE mod.
Then Try a service centre.

in case it wokes up.. anyone has links for stock rom and pit to flash with odin?
thanks again

There are some ways, when already got into DL mode is best to reflash with 812.pit file and then again with 512.pit file. After I bricked my phone and got "death" screen (God I was crying) I found way of taking up DL mode (hopefully SGS is pretty-hard to brick). Others than that try to connect to your phone via usb (remember to first inset usb and then battery) and hold ALL of the buttons on your phone. Screen must flash about 3 times and then release volUp to get DL mode combo. I hope that will help you as me.

Taxiozaurus said:
There are some ways, when already got into DL mode is best to reflash with 812.pit file and then again with 512.pit file. After I bricked my phone and got "death" screen (God I was crying) I found way of taking up DL mode (hopefully SGS is pretty-hard to brick). Others than that try to connect to your phone via usb (remember to first inset usb and then battery) and hold ALL of the buttons on your phone. Screen must flash about 3 times and then release volUp to get DL mode combo. I hope that will help you as me.
Click to expand...
Click to collapse
Any updates on this ? cause I'm also having the same issue!

Dan_Aykroyd said:
The JIG won't work when you brick with a black screen (i.e. bootloader corruption, so no boot at all).
Your only solution is to JTAG it or sadlly, throw it away...
Click to expand...
Click to collapse
Are you 100% sure the JIG wont work if bricked with a black screen. Are there any other possibilities to unbrick the phone. I really need this phone back or my dad will kill me..

Might be Bricked. NEED HELP!

Ok I did something stupid with my Galaxy S. I didn't pay attention to the firmware I was downloading i did a search for orange branded i9000 Firmware, and was downloaded from a site. Legit firmware and all. So I went to flash with odin like I have done lots of times. Came up fail, so I figured something happened during transfer, so restarted it back into download mode and reflashed again. FAIL again. Restarted and it would not turn back on. The unfortunate to all this is, the firmware after looking in horror at my galaxy s and looking back at the screen said I9100 above and I did not see that at all.
Sooo even with a USB jig this will not show a download menu, no recovery mode, no screen when plugged into charger. Anyone have any tips before I attempt the unbrickable mod?

post you question on darky rom forum they might b able to help

If even the Jig does not work i would try the unbricablemod. I dont't know an other solution to revive your phone than the UnbrickableMod if your phone doesn't boot into the Downloadmode with a Jig. So you have nothing to loose just try this Mod.(it could be your last hope to rescue the phone without sending the phone to Samsung) I didn't try it yet because i ever could revive my phone with the Jig but I've read some reports in a german forum and the users there are reporting that the Mod does rescue the phone even if the Jig doesn't boot your phone in Downloadmode.
You can find the unbricablemod i'm talking about here. http://forum.xda-developers.com/showthread.php?t=1153310 It's called "one click-unbrick". Just follow the given instructions and your phone schould work as before

Is your phone really bricked?
Is your phone bricked, or is it stuck at boot???
Normally, if a phone gets bricked, you see the screen of death: a phone logo and a computer logo, with an exclamation mark in between the two...
By the description, it looks like your phone is not able to boot, and is stuck at the screen, where it says: i9000
try putting it in downloading mode, and use odin to go back to stock firmware....

If you can't even turn on your phone, maybe your battery is flat after all that flashing

nwsk said:
If you can't even turn on your phone, maybe your battery is flat after all that flashing
Click to expand...
Click to collapse
^^^ That may be the case, try to get another battery or chargning this batter outside the phone (wire to to a 5v source).
Sidenote: I think that download mode draws power from the usb (the phone will stay on even if the battery is removed [at-least mine does])
If the jig does not work then you probably flashed the bootloader or something...which is bad, in that case, unbrickable mod may be your only hope.

I revived it with just the software version of the unbrickable tool. Only have like 2 seconds to do it in linux when you connect the phone, but it put it into a white screen and I flashed with heimdall and I am back up and running. Thank you all!

so you flashed a stable ?

Yep I posted stable. It's weird because if your device shows up in windows some weird device you only have have a couple seconds in linux to make it flip into download, but its doable and I didn't have to hardware mod anything. Back to a perfectly working Galaxy S

Good for you !
You did it well, nice one! ;-)

I was to about to ask you to check your battery but glad you fixed it

[Q] please someone anyone HELP my samsung captivate is soft bricked

ok to start with I am soft bricked cause i got the phone-!-computer on my screen. here is how it got bricked to start with... was updating to android 2.3 gingerbread with kies mini and the first time when finished updating my wifi would not work so i flashed the rom with odin and it was a bad version cause instantly it went to recovery mode. so I went and downloaded odin one click and flashed it back to stock android eclair and went to update to 2.2 froyo with kies mini our power blinked and now im softbricked.
ok here is what ive tried so far... 3 button combo both volumes and power tried all that. ok next i tried one click unbrick it just say failed everytime... tried AIO captivate toolbox and no avail.. went radio shack got 3 resistors 100k made a jig touched pins 4 and 5 and didnt work either.. so my questions are as follows
1. what next????
2. could i have possibly shorted out my usb port on my phone since i accidently slipped and touched a pin i should not have and AIO captivate toolbox says usb debugging isnt on.
3. is there any way to test the micro usb port on the phone to see if its working right?
any and all help would be very much appreciated.
thanks...

You're actually in an ok place. That phone--/!\--computer screen will function like download mode most times. Just try your Odin file again and you should be fine.

odin isnt recognizing it. is there a way i can make it recognize it?

I just went through this and got my phone working so no need to panic. Odin wouldnt see my phone but heimdall does. Search for the kb2 heimdall one click package and see if that helps. Since you flashed back to 2.2 youll need to use kb2. If you are on GB i897 bootloaders youll need the kk4 heimdall one click package

garydv2002 said:
odin isnt recognizing it. is there a way i can make it recognize it?
Click to expand...
Click to collapse
Try different ports, if nothing else. Look in the "Captivate Connection Issues" post in my signature for more items.
Also, you will probably want to stop using the AIO Toolbox. That particular piece of software is a little risky, as it flashes a known dangerous bootloader setup.

I found myself in the same boat. 3-button combo won't work, you have to remove battery and usb cable. Replace battery. Plug usb cable into the motherboard directly(rear), hold volume + and volume - then plug the usb cable into your phone. hold volume buttons until your phone boots into download mode. (assuming you have proper drivers installed)

didnt work
tried both heimdels kk2 and kk4 they both say looking for device. and also tried plugging my usb cord into every usb port on my computer still nothing.

Did your drivers unseat? for some odd reason i had to reinstall the drivers to get mine out of soft brick.

drivers
would that be the drivers for the program or the phone? and also on the kk2 and kk4 they download as jar files just like oneclick unbrick did so do i need to unzip them and move the jar file to where the exe folder is then right click and run as administrator or can i just run the jar file i downloaded?
also the the zadig driver program that comes with heindel programs will not see my phone at all when plugged in any usb port but my wife has a captivate also and when i plugged hers in zadig can see it as samsung usb composite device....

garydv2002 said:
odin isnt recognizing it. is there a way i can make it recognize it?
Click to expand...
Click to collapse
Pull battery, pull cable. With phone off, replace battery. Then press volume up only, and power. When screen loads, plug your USB in. If you get the system files screen, press the menu key. Then try Oden. This is what I had to do to get it to work.
Gingerbread through mini kies sucks. Your better off getting Gingerbread here:
http://forum.xda-developers.com/showthread.php?t=1300843

didnt work either
tried the just the volume up and power and plugged in usb still stuck in brick mode...

didnt work
the volume up and power then plug usb didnt work still in brick mode. should i try the usb jig with the phone off or on? when i touch pins 4 and 5 with the jig and the phone off the screen will come on but still computer- ! - phone no download mode

got it
finally got into download mode with the jig and alot of wiggling cussing fussing griping and finally praying lol.... thanks to all of you for your help not many strangers will help people anymore so thanks guys for your time i really appreciate it greatly

HELP
I have the Phone...!... computer screen ive done ever battery pull method oden cant "see" it but my computer says that a unidentifiable USB is plugged in. any advice?

cappy flasher said:
I have the Phone...!... computer screen ive done ever battery pull method oden cant "see" it but my computer says that a unidentifiable USB is plugged in. any advice?
Click to expand...
Click to collapse
Unistall your phone's drivers, restart pc and reinstall them.

Drivers
So i dont know what the drivers are I had a friend set this all up for me. also i think if odin id updated that might work. It was current at the time but when a few months pass its time to update!
---------- Post added at 03:53 AM ---------- Previous post was at 03:46 AM ----------
BWolf56 said:
Unistall your phone's drivers, restart pc and reinstall them.
Click to expand...
Click to collapse
so i just updated odin and i still got nothing. so what are the drivers? ill try that.

if you dont even know what drivers are in windows, and have other people set things up for you, you should not be flashing your phone in the first place.
any time you buy a device and hook it up to windows you install??? drivers.
Google: "drivers"... a piece of software that tells an operating system how to use a device.
but it is doubtful reinstalling your drivers will help
what version of odin are you using? what are you trying to flash now? what were you flashing when it messed up?
im sorry but this may end up being an expensive lesson not to do things you dont understand. you may have to send your phone away to be jtagged or unbricked.

I still have the phone...!...computer screen so i should be able to flash it back to stock. and even though i didn't add the drivers I know what im doing so don't assume Im a noob at this. and for your information I own 6 Samsung captivates and I work for Mobile Tech Videos so I flash these phone a lot I flash at least twice a day. so Jtaging it will be rather inexpensive but I would like to figure this out so I don't have to spend my time shipping this phone out. I notice that a lot of people have the same trouble as I am having so if I figure out how to solve the worst soft brick (witch I now have) it will be great for A post that covers everything with this screen. I got my phone this way by the USB port falling out during flashing so I'm lucky to even have this screen. I was at gingerbread 2.3.5 stock flashing to ice cream sandwich. I tryed using the USB jig but it failed so all I need to know is what the driver names are so i can try what was recommended. I also think ADB might help solve the problem some how some way. I just got the most recent Odin I was using 1.3 now im using 1.85

Not to be mean or start something, but if you work for mobile tech videos and you don't know what drivers are or you say you flash phones multiple times a day, then you should have a GREAT idea of what to do to fix this problem. Did you flash an ICS ROM and it bootlooped on the first flash, well that is supposed to happen. And Since you were on 2.3.5 then there is no DL mode combo problem. I don't know what to tell you. use your resources and Google it, or better yet let me Google that for you...

cappy flasher said:
I still have the phone...!...computer screen so i should be able to flash it back to stock. and even though i didn't add the drivers I know what im doing so don't assume Im a noob at this. and for your information I own 6 Samsung captivates and I work for Mobile Tech Videos so I flash these phone a lot I flash at least twice a day. so Jtaging it will be rather inexpensive but I would like to figure this out so I don't have to spend my time shipping this phone out. I notice that a lot of people have the same trouble as I am having so if I figure out how to solve the worst soft brick (witch I now have) it will be great for A post that covers everything with this screen. I got my phone this way by the USB port falling out during flashing so I'm lucky to even have this screen. I was at gingerbread 2.3.5 stock flashing to ice cream sandwich. I tryed using the USB jig but it failed so all I need to know is what the driver names are so i can try what was recommended. I also think ADB might help solve the problem some how some way. I just got the most recent Odin I was using 1.3 now im using 1.85
Click to expand...
Click to collapse
Heimdall flash!
Sent from my SAMSUNG-SGH-I897 using XDA

[BRICKED AGAIN !] Black screen, no bootscreen, no detection

Yesterday after unbricked my note from lpy brick (for the 5th time), I tried to flash a stock rom with a pit file (found somewhere on xda, special 16gb pit file for restoring bricked device) but the flash stuck at the begginning so I unplugged it.
Now my phone is unable to go in Download mode, recovery mode neither normal mode.
The screen stay black whatever I do, I've tried all the combinaison possible...
I tried to put it in charge all the night but now the problem is still here.
Any help appreciated

Phenom2 said:
Yesterday after unbricked my note from lpy brick (for the 5th time), I tried to flash a stock rom with a pit file (found somewhere on xda, special 16gb pit file for restoring bricked device) but the flash stuck at the begginning so I unplugged it.
Now my phone is unable to go in Download mode, recovery mode neither normal mode.
The screen stay black whatever I do, I've tried all the combinaison possible...
I tried to put it in charge all the night but now the problem is still here.
Any help appreciated
Click to expand...
Click to collapse
ur phone still ok but u need do manually ...
1st-take out ur battery
2nd-put it back
3rd-Put your Galaxy Note into download mode by holding down Volume Down, Center button, and Power button together for about 10 seconds.
after that press volume up , then connect ur device to odin , flash new fresh rom without pit file

Your phone seems to be totally unresponsive; that sounds like the ultimate hard brick to me.
Take it to the nearest service centre.

USB jig
Did you try putting your phone to download using USB jig ? There are many articles relating to that . Sometimes the phone may not charged when its bricked . So get it charged from somewhere else , or may be from your friend who has note and try using USB jig . It might work , no guarantee , try your luck , else be ready to spend almost half what you paid for your phone to change the motherboard !

ichson said:
ur phone still ok but u need do manually ...
1st-take out ur battery
2nd-put it back
3rd-Put your Galaxy Note into download mode by holding down Volume Down, Center button, and Power button together for about 10 seconds.
after that press volume up , then connect ur device to odin , flash new fresh rom without pit file
Click to expand...
Click to collapse
Already tried... Odin doesn't show me anything... neither adb nor windows..
chasmodo said:
Your phone seems to be totally unresponsive; that sounds like the ultimate hard brick to me.
Take it to the nearest service centre.
Click to expand...
Click to collapse
I have unbricked all my brickeds phones, I think there's always a solution for unbricking it, but if I can't I will take it to SSC
Archangel919 said:
Did you try putting your phone to download using USB jig ? There are many articles relating to that . Sometimes the phone may not charged when its bricked . So get it charged from somewhere else , or may be from your friend who has note and try using USB jig . It might work , no guarantee , try your luck , else be ready to spend almost half what you paid for your phone to change the motherboard !
Click to expand...
Click to collapse
I don't think that the problem is battery, It was 55% yesterday evening, but I haven't friend with a Gnote
I haven't a JIG but I will try to make one if I can find a 300K resistor
Can I find a 300K resistor into a old none working device ? (Like a old radio, tv, telecommand ?)

Phenom2 said:
Now my phone is unable to go in Download mode, recovery mode neither normal mode.
The screen stay black whatever I do, I've tried all the combinaison possible...
I tried to put it in charge all the night but now the problem is still here.
Any help appreciated
Click to expand...
Click to collapse
similar type of brick....and the suggestion given by the SSC is better to buy a new mobile since they have to replace the main board....(without warranty)..and cost will be around (Dhs.1150) that is almost half the price of new mobile....
btw i have tried jig also but no luck...

I have the same problem with my galaxy note.
i treid everything no reaction
pls has somebody an idea for me ?

Same problem with me.
Weird, I had a I91000 for a year, flashed everything and never had any problems. Never got close to bricking it.
I did this:
Rooted it with this method: http://forum.xda-developers.com/showthread.php?t=1501719 - OK
Ran again CWM.
I put the latest nightly from CM9. When I started flashing it, it hung. I turned off my cell (no other option, it was stuck), now it won't turn on.
Whoa... What did I do wrong? I admit I was anxious and didn't take the proper care I should've, I was very anxious, but, wow... I wasn't expecting it to be so easily brickable.
Do I have any hope left?