Database Develop

eViL-NXSense-v.1.13.1

Hey guys. I tried asking these questions on the official thread of this Rom but somehow my post is getting lost in the tons of pages which are accumulating everyday So here are my questions :
y2jamit said:
Alright folks. I finally managed to move from CM6 stable to NXSense. Before moving from CM 6, I partitioned my SD card using Rom manager with a partition of 512 MB & a swap of 32 MB.I managed to install version eViL-NXSense-v.1.13.1. However after that eViL-Q&D-NXSense-v.1.14.1 was released. So I downloaded that first from the 4shared link. I tried to install the new ROM from Rom Manager using the wipe option. However when the phone goes into recovery it shows formatting blah blah blah and then phone doesn't install the 1.14.1 Rom and reboots and gets stuck on the Google cross logo.
I managed to restore back to 1.13.1 from the back up that I had made. Now instead of using the Rom Manager I booted into recovery and tried to use the install from SD card option. This time the phone started copying files and showed that twice. After this I get the following huge error:
E: Can't symlink /system /customize/resource/bootanimation.zip
E: Failure at line 27:
symlink/data/local/bootanimation.zip
SYSTEM : customize/resource/bootanimation.zip
Installation aborted.
I had to once again resort back to my backup. Can anyone help me out this issue?
After all this I even tried to install 1.13.1 from the recovery using the install from sd card option and apparently this also gave me the exact same bootanimation error. So I guess both the zips are ok. not sure what else could be going wrong.
Also even after flashing networkfix on 1.13.1, the market still struggles to work. It shows loading for some time and then gives an option to retry. However if I try to search for any application or go to downloads, the market starts working normally. Can anyone also provide a fix for this problem?
I really want to use this as my default rom because I am in love with it Excellent work Evil !!! Just want to sort out these issues.
Click to expand...
Click to collapse
In addition to the above mentioned post, I wanted to add that I now also have a2sd enabled after running the commands from terminal emulator. What is the simplest way to update from 1.13.1 to a higher version? Also when loading market for the first time, the GPRS connection disappears and comes back in like a minute. Why is this happening? When using Trackball Alert Pro the patch option says compatible rom not found but the alerts are working fine When using wi-fi hotspot and default options, it is not getting turned on although 3G shows in the top left corner. Do I have manually change any settings.
I would be highly grateful if anyone can resolve all or any of my queries. I am absolutely exhausted in asking these queries in the official thread and reading through tons of pages just to see my query being buried.
Thanks in advance guys.

Alright guys I managed to install 1.14.1 successfully by doing a full wipe first using instructions from this fabulous thread http://forum.xda-developers.com/showthread.php?t=747381 Although this thread is for myTouch 3G Slide, the basic instructions are the same for Nexus One. You just have to use the trackball to select an option. This is exactly what I was looking for I am sure many newbies like me who don't know what a full wipe is, will learn a lot from this magnificent thread. Thank you kingofyo1
Now I still don't understand why the patch option in Trackball Alert Pro shows the rom is not compatible even though basic version is officially provided with the rom. Anyway the alerts work, so I am not going to waste any more time on it.
Even in eViL-Q&D-NXSense-v.1.14.1, when I first open market, my GPRS connection disappears and comes back in like 20-30 seconds. After that market works really well. Anyone has a solution for this?
Also Wi-Fi hotspot still doesn't turn on using default settings. Do I have to manually choose any settings?
Can anyone shed some light on the above mentioned questions?

Stuck on LG screen!

Hi guys,
Im new here and I wanted to post this in the FEAR developement thread, but for some reason I cant, anyway
Im on FEAR 8.0 and it has been running smothly. Today somehow my whatsapp, facebook etc always was forced to shut down when I tried to open it. So I rebooted an now Im stuck on the LG screen. Sometimes it freezes there, sometimes it reboots to the LG screen again!
Any ideas?
Thanks.

Well, seems that the system (Android) has crashed on your phone due to some unknown reason.
The only thing you can do is to do a factory reset (from ClockwordMod Recovery which I assume you have installed).

Yes I think I have it installed, but how does that help me if I cant access the phone anymore? Is there a manual for the reset process?
Is there no way to get the data off the phone, because that would suck big time

Go back to stock rom, search my thread to see how!

At the moment the ROM is not really my concern!
The only concern is my data!
I need a way to get it

Update:
Installed FEAR 10 without full wipe and everything is still there and running

[Q] DS7 Unstable keeps crashing

Hello All,
I'm fairly certain there isn't another thread asking this question, if I overlooked it I apologize in advance. Now to the point, I have a dell streak 7 and I have been having some stability issues with it for about the last week. What was happening is I was running Android 2.2.2 and my system would crash randomly eventually it wouldn't start back up. I tried doing a factory restore several times this didn't work so I re-flashed to restore the original file system and I installed the T-mobile system by mistake. I played around with this for a little bit and every thing seemed fine. So I decided to upgrade to 3.2 honeycomb, I flashed the DS7 did all of the set up steps and started reading about rooting the device (I didn't start any of the steps). While it was sitting next to me in sleep mode I noticed it just randomly reset itself and started booting up. I looked around in it and nothing seemed to be changed, so I powered it off and powered it back on to see if it would freeze up and crash again. it didn't so I put it back in sleep mode and kept reading. then the side lights came on and it froze up. I was able to get it to boot by going into recovery mode and then selecting boot normally. So my question is, is this some sort of hardware issue or something that I am doing wrong? I don't think it's hardware but I could be mistaken. Also, has anyone else had an issue like this and if so is there a known fix? I am going to try re-flashing to the original file system again and replace the restore .img and see if this helps. Also, I'm not sure if my DS7 is the mobile version or wifi only version. I entered the service tag at DELL's website and it said I had the mobile version, however it didn't have the t-mobile start up animation before I flashed it the first time and in the sim card slot there is a black piece of plastic or card (IDK which) lodged in there and it wont come out. Any help or advice on this would be greatly appreciated .
Thanks in advance-Woulfenstien
OK I'm pretty sure i got it solved. what I did was I re-flashed everything. I re-flashed the boot.img, the system.img, and the recovery.img using fastboot and then i re-flashed whole system with nvflash. It's been a couple of hrs. and this has seemed to work so far. I upgraded back to 3.2 honeycomb and rooted the device with no problems so far. If any other issues arise I will post them here along with what i did to fix it. I would also like to thank everyone on this forum who has posted the tutorials, it was a huge help I wouldn't have been able to fix my DS7 with out all of your help.
Thanks again-Woulfenstien

[Solved] Memory issue

Hey everyone,
so when I did a reboot, the first message I see when I rolled down the notification draw was "Preparing SD card. Checking for errors". No matter what I do, the message stays there. Can't even clear it from the notification drawer. I tried taking a screenshot of it, but another message came up: "Couldn't capture screenshot. Couldn't save screenshot. Storage ma (can't see the rest of the text).
I have tried the AIO-Toolkit (twice!) where I completely formatted the partition etc. but this message keeps popping up and the phone is sh*t like this so I am looking for a solution.
Running PA11, this is the first time I run into this with my 2 years of O2X'ism. Will try a stock ICS ROM straight from LG, but I highly doubt it will have any effect on this.
Any help is greatly appreciated!!
Thanks in advance.
-Custom40
Update: Something must have been really currupted. Downloaded original V30A kdz, and the phone froze at bootup. Even AIO-Toolkit couldn't fix this.
So I went looking for a ROM that gets installed through NVFlash (found Homero's ICS ROM) which formats the entire phone. That seems to have fixed it. Back on PA11 now, time to throw a party!

[Q] Stuck on Critical Failure:Unable to start Kernel.

Hi all,
This is my first post on XDA, but have found it useful in the past when needing info for my original G1 and later my HTC Desire, both of which I rooted and added custom roms on via the threads here.
Now though I am really stuck having cocked up an attempt to install Cyanogenmod 10.2 on my 4X HD.
I have a black screen with red text saying "Stuck on Critical Failure:Unable to start Kernel." and a few more lines.
I initially followed a guide at AndroidLegend but because the links in this guide went to Nightly's for 10.2 I decided to download a stable 10.1 instead. I can't post the link but the comments show the problems I was having.
The end result was that I never managed to install 10.1 and had just gone back to the original factory settings, but along the way on another forum I saw someone mention that the ROM may have the original phone name wrong and to take out the assert name in a config file, which I did (now knowing that that was the last thing I should have done). So upon rebooting I ended up where I am now.
I have searched thoroughly on these forums and have tried numerous fixes none of which none have been successful.
The one that I feel comes closest is this one by RuedasLocas (post number 7) on "Rollback Optimus 4X HD from 4.1.2 JellyBean to 4.0.3 Stock ICS"
I've followed it exactly and tried 3 or 4 times on different PC's and although I can see the phone in Device Manager and change port settings (LGE CDMA USB Serial Port to 41) etc, I never get beyond LGFlash Tool changing from "waiting" to anything downloading in Blue or failing in Red, nothing happens and my phone will just sit there in SafeMode whilst plugged in.
Can anyone suggest anything else that I need to do?
Many thanks if you got this far!

Snookered said:
Hi all,
This is my first post on XDA, but have found it useful in the past when needing info for my original G1 and later my HTC Desire, both of which I rooted and added custom roms on via the threads here.
Now though I am really stuck having cocked up an attempt to install Cyanogenmod 10.2 on my 4X HD.
I have a black screen with red text saying "Stuck on Critical Failure:Unable to start Kernel." and a few more lines.
I initially followed a guide at AndroidLegend but because the links in this guide went to Nightly's for 10.2 I decided to download a stable 10.1 instead. I can't post the link but the comments show the problems I was having.
The end result was that I never managed to install 10.1 and had just gone back to the original factory settings, but along the way on another forum I saw someone mention that the ROM may have the original phone name wrong and to take out the assert name in a config file, which I did (now knowing that that was the last thing I should have done). So upon rebooting I ended up where I am now.
I have searched thoroughly on these forums and have tried numerous fixes none of which none have been successful.
The one that I feel comes closest is this one by RuedasLocas (post number 7) on "Rollback Optimus 4X HD from 4.1.2 JellyBean to 4.0.3 Stock ICS"
I've followed it exactly and tried 3 or 4 times on different PC's and although I can see the phone in Device Manager and change port settings (LGE CDMA USB Serial Port to 41) etc, I never get beyond LGFlash Tool changing from "waiting" to anything downloading in Blue or failing in Red, nothing happens and my phone will just sit there in SafeMode whilst plugged in.
Can anyone suggest anything else that I need to do?
Many thanks if you got this far!
Click to expand...
Click to collapse
when you get to "waiting", plug out your cell phone, eject battery, put the battery back in and hold vol - while plugging it back into comp. lgflashtool should then recognise the device and start flashing.
another thing you can do is use kdz flasher, which has a bit easier interface when compared to lgflashtool.

Many thanks for the speedy reply Flying_Bear, possibly seeing some success, did as you said and a file downloaded to the device, however I am now seeing the image that I have attached.
It looks like it's saying don't remove cable and don't switch off and refresh?
Can you confirm what I should do next?
Thanks again

Snookered said:
Many thanks for the speedy reply Flying_Bear, possibly seeing some success, did as you said and a file downloaded to the device, however I am now seeing the image that I have attached.
It looks like it's saying don't remove cable and don't switch off and refresh?
Can you confirm what I should do next?
Thanks again
Click to expand...
Click to collapse
hmmm, truth to be told, i dont remember seeing that image appear when using lgflashtool. also, i've never seen anyone with similar problem to yours (unable to start kernel)
did you give it some time? if it didnt work, try http://forum.xda-developers.com/showthread.php?t=2069723; it's similar to lgflashtool, but no need to set up ports, and you can track the progress while it's flashing (lParam=x on pictures). try 20a kdz file, if that fails, report here with some more info on what the problem was. hope we can fix things for you
also, can you post the link on tutorial you followed to flash cm, just so i can check what steps you have done? just remove http from the link if you cant post it

Flying_Bear said:
hmmm, truth to be told, i dont remember seeing that image appear when using lgflashtool. also, i've never seen anyone with similar problem to yours (unable to start kernel)
did you give it some time? if it didnt work, try http://forum.xda-developers.com/showthread.php?t=2069723; it's similar to lgflashtool, but no need to set up ports, and you can track the progress while it's flashing (lParam=x on pictures). try 20a kdz file, if that fails, report here with some more info on what the problem was. hope we can fix things for you
also, can you post the link on tutorial you followed to flash cm, just so i can check what steps you have done? just remove http from the link if you cant post it
Click to expand...
Click to collapse
It's working!
Just read your reply and as I wanted to wait to see what you might say I left the phone alone, so it was still attached to the pc showing that image.
I then unplugged it, held the power button down to power it down and then back on again, image of the android came up for a second showing as though it was updating, then the LG logo and then Setup started.
5 minutes later wifi and 3G were working and I was logged into Google.
So problem solved!
I'll hang back from updating further until I've read up more on XDA....thanks so much for your help though!