Database Develop

Flashing Issues/Permission Issues

A few days ago I got my Atrix HD and immediately rooted and subsequently unlocked the bootloader. Later I successfully flashed EcHoFiiVe's paranoidAndroid port... I didn't really like it because of the aspect ratio (too tiny) so I tried to flash back to a stock ROM. I lost and later accidentally deleted the backup I had made of the stock ROM that came on the device so that is now out of the question but for some reason, no matter what I do, I can't make changes to /system from the recovery or from the bootloader using fastboot commands. I've tried inputing
Code:
fastboot erase system -w
and it told me that I didn't have sufficient permissions and that the command failed. Therein lies my problem. Fortunately, I have a runnable backup (PA) I just really wish to try something different and the device is adamantly against the idea. According to the bootloader the device is unlocked with status code 3. Any help will be greatly appreciated!

read this
http://forum.xda-developers.com/showthread.php?t=2226527

frog1982 said:
read this
http://forum.xda-developers.com/showthread.php?t=2226527
Click to expand...
Click to collapse
I've read through that and I can now see a line that I missed that said that it was a common issue for that particular command to not work but I still don't know what to do about my inability to flash a different ROM. I have tried to mount /system before flashing and I've tried wiping /system using the recovery before flashing, all without avail. Do you have any advice on how to wipe the system partition?

you do not have to wipe it just fastboot flash Mex retail to overwrite it and you will be starting over.

frog1982 said:
you do not have to wipe it just fastboot flash Mex retail to overwrite it and you will be starting over.
Click to expand...
Click to collapse
to be clear, are you saying I can just do this:
Extract the zip
Open a terminal to the extracted zips directory
Reboot into fastboot
Type the following commands in this order
Code:
fastboot flash boot boot.img
fastboot flash devtree device_tree.bin
fastboot flash system system.img
fastboot -w
fastboot reboot

sparkplugDev said:
to be clear, are you saying I can just do this:
Extract the zip
Open a terminal to the extracted zips directory
Reboot into fastboot
Type the following commands in this order
Code:
fastboot flash boot boot.img
fastboot flash devtree device_tree.bin
fastboot flash system system.img
fastboot -w
fastboot reboot
Click to expand...
Click to collapse
yes but make sure you also have the snap-fastboot files in the folder you are working in or in your path

[Tutorial] How to install Android Loliipop+Root

Note:​I'm going to assume you have the Fastboot and ADB Drivers installed and the boot loader is unlocked! ​
Why is this here?
This thread is made to help new users install the developers preview through what I think is the fastest way and safest way too through the command prompt on Windows.
Responsibility!
If your device becomes bricked, makes toast for you, and anything else I did not mention its simply not my fault since you took it upon your self to do this method.​
Credits!​​Thanks Google for this lovely Operating System. Thank you Chain Fire for providing this method to root Android Lollipop and for your app and boot.img too! Thanks to LG for manufacturing this great device to use and enjoy stock Android. Finally, big thanks to TWRP for providing us with this recovery!​​​​​
The Steps!​​​​​Step 1: Download the Lollipop preview HERE, extract it and open the folder with all the image files along with the radio and bootloader image too.
Step 2: Drop all the images to your folder that contains the ADB and Fastboot files
Step 3: Open the folder that contains the ADB and Fastboot files
Step 4: Hold the shift key and right click and click "Open command window here"
Caution! Make sure you back up everything before you begin the process if not its not my fault you forgot to back up.
Step 5: Make sure your device is in fastboot and connected. We are going to replace the boot loader for a newer one. Please make sure the boot loader image name first before we began because i'm just going to use boot loader as a example the real file name will be different. Type the command shown below.
Code:
fastboot flash bootloader bootloader.img
Step 6: Now we are going to flash the Radio as also stated above be sure to check the image name before we flash.
Code:
fastboot flash radio radio.img
Step 7: Now we are going to flash userdata. This part you don't have to worry about the file name you can just copy and paste the command but, I would double check.
Code:
fastboot flash userdata userdata.img
Step 8: Now going to flash boot or the kernel just as step 8 and here from out I will let you know when you have to worry about the file name again.
Code:
fastboot flash boot boot.img
Step 9: Now were flashing the system files.
Code:
fastboot flash system system.img
Step 10: Now were flashing the a custom recovery (twrp for this example) so we can install the SuperSU files later. You can get the recovery image HERE and rename it "Trecovery" and place it to the same folder. After flashing it go to the recovery and from there reboot it.
Code:
fastboot flash recovery Trecovey.img
Yay! We got Android Lollipop now we have to root it.​​​​​Step 1: Let Andriod Lollipop boot up and go download SuperSu on your device by going to Chainfire SuperSU thread and click on his installable zip link and download SuperSU 2.14 or above. On your computer download his modified boot image HERE and rename it Rboot.img and move it your folder where the ADB and Fastboot files are.
Step 2: On your computer go to fastboot again on your phone and type the code in below.
Code:
fastboot flash boot Rboot.img
Step 3: Go to recovery and install the SuperSU zip as usual, reboot, and that's it. Enjoy!

reserved

Trecovery.img

Thanks for your work. Unfortunately, we already have a sticky thread on flashing images and rooting: http://forum.xda-developers.com/google-nexus-5/general/tutorial-how-to-flash-factory-image-t2513701
The method to flash and root lollipop is no different than any other version.
Because we don't want multiple threads with the some information I will close this thread
Thanks.

flash which ROM ?

Hello, my watch R has 5.1.1 (LDZ22D) stock ROM and it has some problems. I tried factory reset, still not ok. I would like to try flashing again the stock ROM. I have found this thread: http://forum.xda-developers.com/g-watch-r/development/stock-boot-recovery-g-watch-r-t2956964 , i downloaded boot.img, recovery.img and system.img, checked SHA1 but i don't know which version should i try? 5.1.1 (LDZ22D), 5.1.1 (LCA44B), 5.0.2: ??? Are there limitations for downgrade / upgrade ?
And as a guide to flashing...
1. i start watch, swype 11 to 5, so now in fastboot mode i connect to PC, the PC detect the watch as what ?
2. adb devices and if watch is detected i continue.
3. fastboot flash boot boot.img
4. fastboot flash recovery recovery.img
5. fastboot flash system system.img
6. restart
is that ok ?
How long does it take to flash each of those imgs ?
thank you

intersectRaven said:
Notes/FAQ:
1.) I re-mkbootimg-ed them since I'll be uploading 2 x 20+MB files if I didn't. Still has the same SHA1 checksums as the ones being checked by stock ROM so it's safe to flash.
2.) If you're confused on how to download click on the box marked in this pic.
3.) The commands for flashing are as follows:
Boot: fastboot flash boot boot.img
Recovery: fastboot flash recovery recovery.img
System: fastboot flash system system.img
*replace boot.img, recovery.img and system.img with their respective filenames
**how to obtain the fastboot executables and drivers are explained in a separate thread
4.) The system.img provided above are stock and NOT ROOTED. If you want to go completely stock, just flash ALL the 5.0.1 images above.
*only for 5.0.1 since I didn't make a system image for 4.4W.2 or below
Click to expand...
Click to collapse
took that from the link you posted, just conect the watch to the dock while in fastboot mode, search for 15 second adb/fastboot installer, after installing that and the computer detects your watch just follow those steps using cmd and navigating to the directory where the files are at first, remember to install fastboot and adb system wide on the 15 second adb installer

when in fastboot mode the watch is not detected:
C:\Users\user>adb devices
List of devices attached
when i chose "recovery" in fastboot mode (android robot on back with door open and red exclamation mark) i get:
C:\Users\user>adb devices
List of devices attached
410KCHserialnr888 sideload
but the watch says he waits "adb sideload <filename>"
what i am doing wrong ? something else had to be done ?
thank you

you can use adb to boot watch on bootloader, but it is not needed since you can boot into fastboot already, problem is the watch is not detected on fastboot mode, try finding some drivers or something, what i usually do is download cydia impactor and select usb then let it do the driver stuff for me, quote me next time so i can get notified when you respond

Unable to unroll from Nougat

Hey,
I enrolled to the Android Nougat program and rooted my phone (chainfire) a few days ago. Decided to un-root (using superSU), and it said I was unrooted. After doing the un-rooting, the OEM unlock-option was greyed out (and on OFF setting), but the phone recovery says it's unlocked api 3.... I pretty much just wanted to unenroll and go back to MM. Every time I choose unroll from Google, download the MM OTA and it reboots I get an error. Just an image of android with message "ERROR". The only way to get the phone working is to do a hard reset and go back to Nougat.
Not quite sure what is wrong here. Any suggestions?

It's probably because the SuperSU unroot hasn't cleaned up everything that the MM installer checks for. Your best bet is to use the sideload OTA here:
https://developers.google.com/android/nexus/ota
to install MM again. It's quick and easy, and doesn't touch your data.
Since you received the actual uninstall OTA you must have successfully unenrolled, so you should be ok from now on.

dahawthorne said:
It's probably because the SuperSU unroot hasn't cleaned up everything that the MM installer checks for. Your best bet is to use the sideload OTA here:
https://developers.google.com/android/nexus/ota
to install MM again. It's quick and easy, and doesn't touch your data.
Since you received the actual uninstall OTA you must have successfully unenrolled, so you should be ok from now on.
Click to expand...
Click to collapse
I received the OTA but while installing MM it gives me an error, so I have to go back to Nougat every time. I've tried the unenroll option several times and it gives me the same "error" every time. So, I should try manually flashing MM, then?

UPDATE:
I tried the following:
Downloaded and tried to sideload 6.0.1 (MOB30W) to my Nexus 6-device. It got up to 46% and after it gave me and error saying:
WARNING: No file_contexts. This package is for shamu devices; this is a "".
E: Error in /sideload/package.zip
Status 7
Installation aborted.
UPDATE2:
Tried another package. Didn't work. All the OTA updates stop at 46% giving me the same error. Device remains unlocked, but appears not to be rooted. Still stuck on Nougat.

What does "Tried another package" mean?
It may be that your download was corrupt. I always check the SHA with this checksum utility:
http://download.cnet.com/MD5-SHA-Checksum-Utility/3000-2092_4-10911445.html
though I've read in the instructions that the Android installation itself checks the package - it may be this error that the installation is reporting.

dahawthorne said:
What does "Tried another package" mean?
It may be that your download was corrupt. I always check the SHA with this checksum utility:
http://download.cnet.com/MD5-SHA-Checksum-Utility/3000-2092_4-10911445.html
though I've read in the instructions that the Android installation itself checks the package - it may be this error that the installation is reporting.
Click to expand...
Click to collapse
No, the checksum is fine. The package is fine. I mean I tried several OTA packages for N6 and it always stops at 46%. There's something else going on here. Maybe if I re-root with chainfire and the use another method to unroot it? Which is the correct method, I have no idea?

Factory reset, and try sideloading MOB30W again.

dahawthorne said:
Factory reset, and try sideloading MOB30W again.
Click to expand...
Click to collapse
Done it like 5 times already. Also wiped cache. No help.

Hannes084 said:
Done it like 5 times already. Also wiped cache. No help.
Click to expand...
Click to collapse
My suggestion is to go back to Android N, root with SuperSU and see if your OEM UNLOCK toggle in Developer Options is working again and not greyed out. Then I would fastboot flash back to MM and install TWRP and SuperSu.
Sent from my Nexus 6 using XDA-Developers mobile app

Dude, just flash the system image you want. Forget about the OTA

The OTA is a system image.

fast69mopar said:
My suggestion is to go back to Android N, root with SuperSU and see if your OEM UNLOCK toggle in Developer Options is working again and not greyed out. Then I would fastboot flash back to MM and install TWRP and SuperSu.
Sent from my Nexus 6 using XDA-Developers mobile app
Click to expand...
Click to collapse
Root with SuperSU? I think you mean with chainfire?

dahawthorne said:
The OTA is a system image.
Click to expand...
Click to collapse
You could say the new full otas are, but you can't go flashing them freely over newer images.
The unenroll option resets the phone anyways, so the best and aparently the only option for him is to flash the system image he wants from scratch.

blanco2701 said:
You could say the new full otas are, but you can't go flashing them freely over newer images.
The unenroll option resets the phone anyways, so the best and aparently the only option for him is to flash the system image he wants from scratch.
Click to expand...
Click to collapse
Sorry for asking but how would I even do that? I'm on Ubuntu 12, so it seems mega complicated.

Hannes084 said:
Sorry for asking but how would I even do that? I'm on Ubuntu 12, so it seems mega complicated.
Click to expand...
Click to collapse
Well my friend I have no idea since I'm on Windows. Google how to use adb and fastboot on ubuntu, there should be a solution for you.

This is a script that I used to run before the full OTAs became available. It worked many times for me, but the usual caveat - you follow it at your own risk. You can probably skip the backup step in your situation.
Preparation.
- Take a TWRP backup and save it on your PC.
- Download factory image and unzip all files, including the zip within the zip. Rename the *.img files to the names below. Copy all of them to the same folder as your ADB/fastboot executables.
- Download the relevant TWRP and rename to twrp.img - also put in ADB/fastboot folder.
- Copy SuperSU to device (if root wanted).
- Set USB debugging in Developer options & attach to your PC.
- Open a CMD window and check connectivity with "adb devices". If it's ok, copy & paste each command below into the CMD window and run them - the only lengthy one is the system.img.
1. adb reboot bootloader
2. fastboot flash bootloader bootloader.img
3. fastboot reboot-bootloader
4. fastboot flash radio radio.img
5. fastboot reboot-bootloader
6. fastboot erase system
7. fastboot flash system system.img
8. fastboot erase boot
9. fastboot flash boot boot.img
10. fastboot erase cache
11. fastboot flash cache cache.img
12. fastboot reboot-bootloader
13. fastboot flash recovery twrp.img
14. From bootloader boot to TWRP and reflash superSu

dahawthorne said:
This is a script that I used to run before the full OTAs became available. It worked many times for me, but the usual caveat - you follow it at your own risk. You can probably skip the backup step in your situation.
Preparation.
- Take a TWRP backup and save it on your PC.
- Download factory image and unzip all files, including the zip within the zip. Rename the *.img files to the names below. Copy all of them to the same folder as your ADB/fastboot executables.
- Download the relevant TWRP and rename to twrp.img - also put in ADB/fastboot folder.
- Copy SuperSU to device (if root wanted).
- Set USB debugging in Developer options & attach to your PC.
- Open a CMD window and check connectivity with "adb devices". If it's ok, copy & paste each command below into the CMD window and run them - the only lengthy one is the system.img.
1. adb reboot bootloader
2. fastboot flash bootloader bootloader.img
3. fastboot reboot-bootloader
4. fastboot flash radio radio.img
5. fastboot reboot-bootloader
6. fastboot erase system
7. fastboot flash system system.img
8. fastboot erase boot
9. fastboot flash boot boot.img
10. fastboot erase cache
11. fastboot flash cache cache.img
12. fastboot reboot-bootloader
13. fastboot flash recovery twrp.img
14. From bootloader boot to TWRP and reflash superSu
Click to expand...
Click to collapse
If I download the factory image (OTA) off google's site it has none of those files under the zip-folder.

Hannes084 said:
If I download the factory image (OTA) off google's site it has none of those files under the zip-folder.
Click to expand...
Click to collapse
One thing is the OTA image, and another is the Factory Image.
Download the factory image from here.
https://developers.google.com/android/nexus/images#shamu
Unzip everything and you should get all the files needed. As I said before, you would need to have a computer with adb and fastboot installed.

blanco2701 said:
One thing is the OTA image, and another is the Factory Image.
Download the factory image from here.
https://developers.google.com/android/nexus/images#shamu
Unzip everything and you should get all the files needed. As I said before, you would need to have a computer with adb and fastboot installed.
Click to expand...
Click to collapse
Thanks, doing that now!

Hannes084 said:
Thanks, doing that now!
Click to expand...
Click to collapse
Just be sure to have selected "oem unlocking" in the developer options, make a backup (everything will be wiped), and start flashing!. There are several guides everywhere.

My nexus will not flash correctly

Hello guys, ive been generally lucky in the sense that i have had no issues...until now.
I have tried installing the most recent updates (7.0, and now 7.1.1) and i continue to get this error through cmd. It does not seem to want to flash anything, and i have gotten it to flash, root, and twrp, but it still acted funky. Today, trying to remedy the situation, i attempted to flash the new 7.1.1 update, and return to stock (to later return to power user) but it is still doing it.
It says Bootloader: has-slot (not found), and a couple other things. When i try to flash individual pieces, it does not retain it. when i try to flash the flashall.bat, it flashes but does not flash everything, it will say the stuff has transferred 0 and skips it as it looks like. I cannot get my bootloader off the october one, and i have looked everywhere i can to try to fix this.. please help, its driving me mad. I will be happy to provide any information needed.
Thanks Community! You rock!

Have you tried a different USB cable? A different computer? How about a different USB AND a different computer? I think this would be a good place to start.

Can i ask you why this would matter? My usb seems to work fine, and my computer had no issues before this... i can still perform different actions, and my phone is showing up as ADB and Fastboot.

If it's not pc or usb cable related you can try to flash latest factory image step by step via fastboot without your simcard

Well, you might want to post the complete output of your flashing attempt, but if the bootloader slot isn't found, that's usually a sign of a hardware problem. Hopefully I'm wrong, but until we see more from you, I simply don't have an answer for you.

Ive tried to fastboot everything individually, and it refuses to take. I tried the flashall, same thing. I used NRT and it partially worked, but has sorta the same error. I will be flashing again and providing screenshots right now. I was able to get into a rom, root, twrp but i still cannot update all of those core things (bootloader, radio, and such) Thank you guys for the help. Much needed.

Here is the attempt to just flash the bootloader, i have tried from a different location but this is directly in Platform-Tools of the SDK. As you can also see, it does register under fastboot...

Try to flash radio and bootloader via twrp
https://forum.xda-developers.com/ne...-nexus-6-recovery-flashable-fastboot-t3066052
Did you try without simcard?

coremania said:
Try to flash radio and bootloader via twrp
https://forum.xda-developers.com/ne...-nexus-6-recovery-flashable-fastboot-t3066052
Did you try without simcard?
Click to expand...
Click to collapse
yes i have, i only do it with the simcard removed. Now whats weird is it says my bootloader is on 72.01, but my cmd clearly tells me its not working correctly...

coremania said:
Try to flash radio and bootloader via twrp
https://forum.xda-developers.com/ne...-nexus-6-recovery-flashable-fastboot-t3066052
Did you try without simcard?
Click to expand...
Click to collapse
I just tried what you suggest, and im not sure if it worked. It said everything wrote (on twrp) but it was very quickly done. I feel it did the same thing as CMD did.

You could try using the correct Fastboot command...
fastboot flash bootloader bootloader.img
The command is fastboot flash <partition> <image>
Your screenshot says only "fastboot flash image" but doesn't state the partition you're trying to load, hence "unknown partition".
And since we're on the subject, perhaps a repetition of the procedure I used to use before the full OTA days might be useful to you and other people.
Preparation.
- Take a TWRP backup and save it on your PC.
- Download factory image (https://developers.google.com/android/nexus/images#shamu) and unzip all files, including the zip within the zip. Rename the *.img files to the names below. Copy all of them to the same folder as your ADB/fastboot executables.
- Download the relevant TWRP and rename to twrp.img - also put in ADB/fastboot folder.
- Copy SuperSU to device (if root wanted).
- Set USB debugging in Developer options & attach to your PC.
- Open a CMD window, navigate to your ADB folder, and check connectivity with "adb devices". If it's ok, copy & paste each command below into the CMD window and run them - the only lengthy one is the system.img.
1. adb reboot bootloader
2. fastboot flash bootloader bootloader.img
3. fastboot reboot-bootloader
4. fastboot flash radio radio.img
5. fastboot reboot-bootloader
6. fastboot erase system
7. fastboot flash system system.img
8. fastboot erase boot
9. fastboot flash boot boot.img
10. fastboot erase cache
11. fastboot flash cache cache.img
12. fastboot reboot-bootloader
13. fastboot flash recovery twrp.img
14. From bootloader boot to TWRP and reflash superSu

dahawthorne said:
You could try using the correct Fastboot command...
fastboot flash bootloader bootloader.img
The command is fastboot flash <partition> <image>
Your screenshot says only "fastboot flash image" but doesn't state the partition you're trying to load, hence "unknown partition".
And since we're on the subject, perhaps a repetition of the procedure I used to use before the full OTA days might be useful to you and other people.
Preparation.
- Take a TWRP backup and save it on your PC.
- Download factory image (https://developers.google.com/android/nexus/images#shamu) and unzip all files, including the zip within the zip. Rename the *.img files to the names below. Copy all of them to the same folder as your ADB/fastboot executables.
- Download the relevant TWRP and rename to twrp.img - also put in ADB/fastboot folder.
- Copy SuperSU to device (if root wanted).
- Set USB debugging in Developer options & attach to your PC.
- Open a CMD window, navigate to your ADB folder, and check connectivity with "adb devices". If it's ok, copy & paste each command below into the CMD window and run them - the only lengthy one is the system.img.
1. adb reboot bootloader
2. fastboot flash bootloader bootloader.img
3. fastboot reboot-bootloader
4. fastboot flash radio radio.img
5. fastboot reboot-bootloader
6. fastboot erase system
7. fastboot flash system system.img
8. fastboot erase boot
9. fastboot flash boot boot.img
10. fastboot erase cache
11. fastboot flash cache cache.img
12. fastboot reboot-bootloader
13. fastboot flash recovery twrp.img
14. From bootloader boot to TWRP and reflash superSu
Click to expand...
Click to collapse
hahahaha well that could surely be the issue :silly:, but the one thing im wondering is why it wouldnt work through NRT, and i also "successfully" sideloaded the ota... Gonna try this now and hopefully it works! I shall report back when finished

dahawthorne said:
You could try using the correct Fastboot command...
fastboot flash bootloader bootloader.img
The command is fastboot flash <partition> <image>
Your screenshot says only "fastboot flash image" but doesn't state the partition you're trying to load, hence "unknown partition".
And since we're on the subject, perhaps a repetition of the procedure I used to use before the full OTA days might be useful to you and other people.
Preparation.
- Take a TWRP backup and save it on your PC.
- Download factory image (https://developers.google.com/android/nexus/images#shamu) and unzip all files, including the zip within the zip. Rename the *.img files to the names below. Copy all of them to the same folder as your ADB/fastboot executables.
- Download the relevant TWRP and rename to twrp.img - also put in ADB/fastboot folder.
- Copy SuperSU to device (if root wanted).
- Set USB debugging in Developer options & attach to your PC.
- Open a CMD window, navigate to your ADB folder, and check connectivity with "adb devices". If it's ok, copy & paste each command below into the CMD window and run them - the only lengthy one is the system.img.
1. adb reboot bootloader
2. fastboot flash bootloader bootloader.img
3. fastboot reboot-bootloader
4. fastboot flash radio radio.img
5. fastboot reboot-bootloader
6. fastboot erase system
7. fastboot flash system system.img
8. fastboot erase boot
9. fastboot flash boot boot.img
10. fastboot erase cache
11. fastboot flash cache cache.img
12. fastboot reboot-bootloader
13. fastboot flash recovery twrp.img
14. From bootloader boot to TWRP and reflash superSu
Click to expand...
Click to collapse
Unfortunately, it did not work. Now google app keeps crashing. Phone is extremely buggy.

Calko2882 said:
Unfortunately, it did not work. Now google app keeps crashing. Phone is extremely buggy.
Click to expand...
Click to collapse
Can you give a bit more detail? So the phone is crashing, but is it now on the version that you wanted to have (7.0, 7.1.1)? There is rarely such a thing as "too much information".

dahawthorne said:
Can you give a bit more detail? So the phone is crashing, but is it now on the version that you wanted to have (7.0, 7.1.1)? There is rarely such a thing as "too much information".
Click to expand...
Click to collapse
Ok, so what happens is that it says i am on 7.1.1 with i guess the related info, but it does not load in properly as you can see with the screenshots. I start up the initial setup, and i can get through most of it fine, but some areas *permissions* are all blotchy. like i can toggle them on to submit data but i cant see what it is exactly im agreeing to. Then i start the phone, Google App automatically crashes, along side system ui. When i updated them, it seemed to fix the problem. But the issue is, i am not receiving phone calls and texts until possibly days later, and when i send texts it says "sending" and proceeds to spam the hell outta whoever its going to (sends literally 30+ texts). When i call someone, my phones Do Not Disturb mode gets enabled, and then nicely cuts out my audio. I can turn this feature off when im in the call, but sometimes it will then glitch the phone app, and i cannot essentially "hangup". My phone also now dies at 9%, where it had not previously (when i was on other rom / older stock) This all started after i updated to the october patch, and i noticed in december that i didnt have the december patch / update. I went to install it, and the same exact thing occurred. Ive attempted a rescue ota, and a sideload ota, and now this stuff as well, but i fear the worst for my phone. Let me know if i need to add anything else

Strephon may be right in suggesting a hardware fault, but equally it may just be that your phone is now somehow corrupted. My only suggestion is that you nuke it - factory reset, TWRP, wipe everything again in TWRP, and then try installing from fresh using the 7.1.1 full (not OTA) image and the instructions I posted earlier. If it still doesn't work I'm out of ideas, but there are people with far greater experience here than I have, so don't give up. It's too nice a device to just write off.

Calko2882 said:
When i call someone, my phones Do Not Disturb mode gets enabled
Click to expand...
Click to collapse
That's a new feature of 7.1.1. So you won't have to listen to notifications while on the phone. It's disabled as soon as the phone call is over.

dahawthorne said:
Strephon may be right in suggesting a hardware fault...
Click to expand...
Click to collapse
I hope I'm wrong.