Hello guys, ive been generally lucky in the sense that i have had no issues...until now.
I have tried installing the most recent updates (7.0, and now 7.1.1) and i continue to get this error through cmd. It does not seem to want to flash anything, and i have gotten it to flash, root, and twrp, but it still acted funky. Today, trying to remedy the situation, i attempted to flash the new 7.1.1 update, and return to stock (to later return to power user) but it is still doing it.
It says Bootloader: has-slot (not found), and a couple other things. When i try to flash individual pieces, it does not retain it. when i try to flash the flashall.bat, it flashes but does not flash everything, it will say the stuff has transferred 0 and skips it as it looks like. I cannot get my bootloader off the october one, and i have looked everywhere i can to try to fix this.. please help, its driving me mad. I will be happy to provide any information needed.
Thanks Community! You rock!
Have you tried a different USB cable? A different computer? How about a different USB AND a different computer? I think this would be a good place to start.
Can i ask you why this would matter? My usb seems to work fine, and my computer had no issues before this... i can still perform different actions, and my phone is showing up as ADB and Fastboot.
If it's not pc or usb cable related you can try to flash latest factory image step by step via fastboot without your simcard
Well, you might want to post the complete output of your flashing attempt, but if the bootloader slot isn't found, that's usually a sign of a hardware problem. Hopefully I'm wrong, but until we see more from you, I simply don't have an answer for you.
Ive tried to fastboot everything individually, and it refuses to take. I tried the flashall, same thing. I used NRT and it partially worked, but has sorta the same error. I will be flashing again and providing screenshots right now. I was able to get into a rom, root, twrp but i still cannot update all of those core things (bootloader, radio, and such) Thank you guys for the help. Much needed.
Here is the attempt to just flash the bootloader, i have tried from a different location but this is directly in Platform-Tools of the SDK. As you can also see, it does register under fastboot...
Try to flash radio and bootloader via twrp
https://forum.xda-developers.com/ne...-nexus-6-recovery-flashable-fastboot-t3066052
Did you try without simcard?
coremania said:
Try to flash radio and bootloader via twrp
https://forum.xda-developers.com/ne...-nexus-6-recovery-flashable-fastboot-t3066052
Did you try without simcard?
Click to expand...
Click to collapse
yes i have, i only do it with the simcard removed. Now whats weird is it says my bootloader is on 72.01, but my cmd clearly tells me its not working correctly...
coremania said:
Try to flash radio and bootloader via twrp
https://forum.xda-developers.com/ne...-nexus-6-recovery-flashable-fastboot-t3066052
Did you try without simcard?
Click to expand...
Click to collapse
I just tried what you suggest, and im not sure if it worked. It said everything wrote (on twrp) but it was very quickly done. I feel it did the same thing as CMD did.
You could try using the correct Fastboot command...
fastboot flash bootloader bootloader.img
The command is fastboot flash <partition> <image>
Your screenshot says only "fastboot flash image" but doesn't state the partition you're trying to load, hence "unknown partition".
And since we're on the subject, perhaps a repetition of the procedure I used to use before the full OTA days might be useful to you and other people.
Preparation.
- Take a TWRP backup and save it on your PC.
- Download factory image (https://developers.google.com/android/nexus/images#shamu) and unzip all files, including the zip within the zip. Rename the *.img files to the names below. Copy all of them to the same folder as your ADB/fastboot executables.
- Download the relevant TWRP and rename to twrp.img - also put in ADB/fastboot folder.
- Copy SuperSU to device (if root wanted).
- Set USB debugging in Developer options & attach to your PC.
- Open a CMD window, navigate to your ADB folder, and check connectivity with "adb devices". If it's ok, copy & paste each command below into the CMD window and run them - the only lengthy one is the system.img.
1. adb reboot bootloader
2. fastboot flash bootloader bootloader.img
3. fastboot reboot-bootloader
4. fastboot flash radio radio.img
5. fastboot reboot-bootloader
6. fastboot erase system
7. fastboot flash system system.img
8. fastboot erase boot
9. fastboot flash boot boot.img
10. fastboot erase cache
11. fastboot flash cache cache.img
12. fastboot reboot-bootloader
13. fastboot flash recovery twrp.img
14. From bootloader boot to TWRP and reflash superSu
dahawthorne said:
You could try using the correct Fastboot command...
fastboot flash bootloader bootloader.img
The command is fastboot flash <partition> <image>
Your screenshot says only "fastboot flash image" but doesn't state the partition you're trying to load, hence "unknown partition".
And since we're on the subject, perhaps a repetition of the procedure I used to use before the full OTA days might be useful to you and other people.
Preparation.
- Take a TWRP backup and save it on your PC.
- Download factory image (https://developers.google.com/android/nexus/images#shamu) and unzip all files, including the zip within the zip. Rename the *.img files to the names below. Copy all of them to the same folder as your ADB/fastboot executables.
- Download the relevant TWRP and rename to twrp.img - also put in ADB/fastboot folder.
- Copy SuperSU to device (if root wanted).
- Set USB debugging in Developer options & attach to your PC.
- Open a CMD window, navigate to your ADB folder, and check connectivity with "adb devices". If it's ok, copy & paste each command below into the CMD window and run them - the only lengthy one is the system.img.
1. adb reboot bootloader
2. fastboot flash bootloader bootloader.img
3. fastboot reboot-bootloader
4. fastboot flash radio radio.img
5. fastboot reboot-bootloader
6. fastboot erase system
7. fastboot flash system system.img
8. fastboot erase boot
9. fastboot flash boot boot.img
10. fastboot erase cache
11. fastboot flash cache cache.img
12. fastboot reboot-bootloader
13. fastboot flash recovery twrp.img
14. From bootloader boot to TWRP and reflash superSu
Click to expand...
Click to collapse
hahahaha well that could surely be the issue :silly:, but the one thing im wondering is why it wouldnt work through NRT, and i also "successfully" sideloaded the ota... Gonna try this now and hopefully it works! I shall report back when finished
dahawthorne said:
You could try using the correct Fastboot command...
fastboot flash bootloader bootloader.img
The command is fastboot flash <partition> <image>
Your screenshot says only "fastboot flash image" but doesn't state the partition you're trying to load, hence "unknown partition".
And since we're on the subject, perhaps a repetition of the procedure I used to use before the full OTA days might be useful to you and other people.
Preparation.
- Take a TWRP backup and save it on your PC.
- Download factory image (https://developers.google.com/android/nexus/images#shamu) and unzip all files, including the zip within the zip. Rename the *.img files to the names below. Copy all of them to the same folder as your ADB/fastboot executables.
- Download the relevant TWRP and rename to twrp.img - also put in ADB/fastboot folder.
- Copy SuperSU to device (if root wanted).
- Set USB debugging in Developer options & attach to your PC.
- Open a CMD window, navigate to your ADB folder, and check connectivity with "adb devices". If it's ok, copy & paste each command below into the CMD window and run them - the only lengthy one is the system.img.
1. adb reboot bootloader
2. fastboot flash bootloader bootloader.img
3. fastboot reboot-bootloader
4. fastboot flash radio radio.img
5. fastboot reboot-bootloader
6. fastboot erase system
7. fastboot flash system system.img
8. fastboot erase boot
9. fastboot flash boot boot.img
10. fastboot erase cache
11. fastboot flash cache cache.img
12. fastboot reboot-bootloader
13. fastboot flash recovery twrp.img
14. From bootloader boot to TWRP and reflash superSu
Click to expand...
Click to collapse
Unfortunately, it did not work. Now google app keeps crashing. Phone is extremely buggy.
Calko2882 said:
Unfortunately, it did not work. Now google app keeps crashing. Phone is extremely buggy.
Click to expand...
Click to collapse
Can you give a bit more detail? So the phone is crashing, but is it now on the version that you wanted to have (7.0, 7.1.1)? There is rarely such a thing as "too much information".
dahawthorne said:
Can you give a bit more detail? So the phone is crashing, but is it now on the version that you wanted to have (7.0, 7.1.1)? There is rarely such a thing as "too much information".
Click to expand...
Click to collapse
Ok, so what happens is that it says i am on 7.1.1 with i guess the related info, but it does not load in properly as you can see with the screenshots. I start up the initial setup, and i can get through most of it fine, but some areas *permissions* are all blotchy. like i can toggle them on to submit data but i cant see what it is exactly im agreeing to. Then i start the phone, Google App automatically crashes, along side system ui. When i updated them, it seemed to fix the problem. But the issue is, i am not receiving phone calls and texts until possibly days later, and when i send texts it says "sending" and proceeds to spam the hell outta whoever its going to (sends literally 30+ texts). When i call someone, my phones Do Not Disturb mode gets enabled, and then nicely cuts out my audio. I can turn this feature off when im in the call, but sometimes it will then glitch the phone app, and i cannot essentially "hangup". My phone also now dies at 9%, where it had not previously (when i was on other rom / older stock) This all started after i updated to the october patch, and i noticed in december that i didnt have the december patch / update. I went to install it, and the same exact thing occurred. Ive attempted a rescue ota, and a sideload ota, and now this stuff as well, but i fear the worst for my phone. Let me know if i need to add anything else
Strephon may be right in suggesting a hardware fault, but equally it may just be that your phone is now somehow corrupted. My only suggestion is that you nuke it - factory reset, TWRP, wipe everything again in TWRP, and then try installing from fresh using the 7.1.1 full (not OTA) image and the instructions I posted earlier. If it still doesn't work I'm out of ideas, but there are people with far greater experience here than I have, so don't give up. It's too nice a device to just write off.
Calko2882 said:
When i call someone, my phones Do Not Disturb mode gets enabled
Click to expand...
Click to collapse
That's a new feature of 7.1.1. So you won't have to listen to notifications while on the phone. It's disabled as soon as the phone call is over.
dahawthorne said:
Strephon may be right in suggesting a hardware fault...
Click to expand...
Click to collapse
I hope I'm wrong.
Related
Preamble
As the title suggests, I had a Nexus 5 running stock Android 5.0, with root and TWRP, and wanted to update to Android 5.0.1 (without losing all my data, of course). I couldn't find any guides for my particular circumstances, so after working out how to do it myself, I thought I'd share my method.
Note: This guide is not for the uninitiated. Be prepared to Google something for yourself if you don't understand it.
Prerequisites
Before starting this guide, you should have:
A Nexus 5 that running stock Android. The presence of root/Xposed/custom recovery (maybe custom kernels?) shouldn't be relevant, but I can't vouch for the efficacy of this guide if you've done something obscure to your install.
Android SDK tools, specifically the ADB and fastboot binaries. Additional USB drivers may be required on Windows.
The factory image for the Android version you are currently running.
1. Uninstall root and other /system modifications
If you have rooted your Android, and/or installed BusyBox, Xposed or other modifications to /system, you will need to uninstall these modifications. Failing to do so will cause the OTA to complain that there's something funky going on in your /system partition.
You may be able to manually uninstall each of these modifications, but this was not enough for my install – doing a ‘Full unroot’ in SuperSU still left behind files in /system. The easiest way to uninstall all /system modifications is to reflash the /system partition.
Extract the Nexus 5 factory image (e.g. hammerhead-lrx21o-factory-01315e08.tgz), yielding a directory with files such as flash-all.bat and image-hammerhead-XXXXXX.zip. Do not use the flash-all script, as this will unnecessarily wipe all data on the device.
Extract the image-hammerhead-XXXXXX.zip file, specifically the system.img file.
Open a command prompt/terminal window.
Connect the phone to the computer with a USB cable.
Boot the phone into the bootloader.
Method 1: Power down the phone, then hold VolUp + VolDn + Power until the phone boots into the bootloader.
Method 2: From the terminal, run adb reboot bootloader while the phone is still powered on.
From the terminal, run fastboot flash system /path/to/system.img.
2. Uninstall any custom recovery
Custom recoveries don't seem to support OTA updates, making it necessary to uninstall the custom recovery by reflashing the stock recovery.
Extract the recovery.img file from the factory image, as in Part 1.
Open a command prompt/terminal window, connect the phone to the computer, and boot into the bootloader, as in Part 1.
From the terminal, run fastboot flash recovery /path/to/recovery.img.
Optional: Reflash boot.img and/or cache.img
Some users have reported that reflashing system.img was not sufficient, and that reflashing boot.img and/or cache.img was also necessary. I did not have this problem, but if you do:
Extract the boot.img and/or cache.img files from the factory image, as in Part 1.
Open a command prompt/terminal window, connect the phone to the computer, and boot into the bootloader, as in Part 1.
From the terminal, run fastboot flash boot /path/to/boot.img.
From the terminal, run fastboot flash cache /path/to/cache.img.
3. Apply the OTA update
The simple part. In the bootloader, use the VolUp/VolDn buttons to select ‘Start’, then press the Power button, to reboot into Android. Follow the system update instructions to install the OTA update.
4. Reflash the custom recovery and re-root
Also self-explanatory.
Hey,
I just wanted to say thanks. This totally fixed the problem I was having. I also want to add that after I flashed the system.img, I was getting errors related to "EMMC:/dev/block/platform/msm_sdcc.1/by-name/boot" with a bunch of numbers after. I googled it and found I had to also flash boot.img, and after that, the OTA worked fine. I would assume if anyone else gets errors like this, they should flash whatever img it shows in the error (ie: mine said /by-name/boot so I flashed boot.img).
-BGM
It worked for me
I've always been using a toolkit for my rooting purposes, I have done Full Unroot on SuperSU, but still getting an error when trying to update to 5.0.1
Will flashing stock wipe everything(whatsapp image, camera's,messages, etc etc)on my phone?
azlan96 said:
I've always been using a toolkit for my rooting purposes, I have done Full Unroot on SuperSU, but still getting an error when trying to update to 5.0.1
Will flashing stock wipe everything(whatsapp image, camera's,messages, etc etc)on my phone?
Click to expand...
Click to collapse
I also had problems using ‘Full Unroot’ in SuperSU. It's not actually as ‘full’ as it sounds.
Flashing a full factory image would normally wipe everything, but carefully following this guide will only reset the /system partition, not any user data.
I'd like to say thank you very much! I was looking for this kind of tutorial... I encountered an error while following all the steps because I forgot I had a custom kernel. So I wanted to add that if you have a custom kernel remember to do the same steps as described above for the kernel (return to stock) and then follow the system and recovery steps afterwards.
If you don't like running commands in terminal you can use Nexus Root Toolkit, on advanced, you have all the commands you need available.
Thank you very much RunasSudo
Taiyo85 said:
I'd like to say thank you very much! I was looking for this kind of tutorial... I encountered an error while following all the steps because I forgot I had a custom kernel. So I wanted to add that if you have a custom kernel remember to do the same steps as described above for the kernel (return to stock) and then follow the system and recovery steps afterwards.
If you don't like running commands in terminal you can use Nexus Root Toolkit, on advanced, you have all the commands you need available.
Thank you very much RunasSudo
Click to expand...
Click to collapse
I have my ADB and Fastboot ok as confirmed by nexus root toolkit, but I am not sure on how to use terminal.. I launched command prompt but it doest recognise all the commands..
Tried Flash Stock + Unroot on Nexus Root Toolkit but the software will crash (fastboot.exe has stopped responding)
I am really clueless on what to do next..
azlan96 said:
I have my ADB and Fastboot ok as confirmed by nexus root toolkit, but I am not sure on how to use terminal.. I launched command prompt but it doest recognise all the commands..
Tried Flash Stock + Unroot on Nexus Root Toolkit but the software will crash (fastboot.exe has stopped responding)
I am really clueless on what to do next..
Click to expand...
Click to collapse
Flash Stock + Unroot wipes everything and defeats the purpose of the tutorial made by RunasSudo
First and foremost you should download Android SDK (Tools only) on http://developer.android.com/sdk/index.html and then ask to install the extra: Google USB Driver.
With Nexus Root Toolkit you don't need terminal, click on advanced and you should see options to flash through fastboot the system only, recovery and kernel. It is pretty straighforward and it asks where the .img are in your computer
Thanks! This guide worked.
For Ubuntu users, you need to install adb and fastboot with these commands :
sudo add-apt-repository ppahablet-team/tools && sudo apt-get update (optional)
sudo apt-get install android-tools-adb android-tools-fastboot
Thanks for the great step by step.
As with some of the other posters, re-flashing system.img was not enough for me, I had to also re-flash the boot.img. Once that was done, I had no problems side loading the update and am now running LRX22C.
I only seem to fiddle with adb once a year - when it OTA time comes - and can never seem to remember some of the steps that need to be taken. Reading through some of the other threads, I have a feeling a lot of people who rooted/custom recovery and cant do the OTA are going to be doing complete image re-flashes when this guide makes that completely unecessary.
thanks again,
.d
BananasGoMoo said:
I googled it and found I had to also flash boot.img, and after that, the OTA worked fine.
Click to expand...
Click to collapse
datcon said:
As with some of the other posters, re-flashing system.img was not enough for me, I had to also re-flash the boot.img.
Click to expand...
Click to collapse
Thanks for the feedback! I've added a note about boot.img to the OP.
+1 for flashing boot.img worked perfect after I did that.
I tried with this tutorial. I flashed system and recovery and then restart. Confirm OTA but I get ERROR.
Then I flashed boot as it was described. Now I don't get OTA In About phone, I'm still on 5.0.0, Check for updates now don't find update
Any idea?
UPDATE - UPDATE: After hour now it is here ... super, it works.
This walkthrough was most helpful! Ended up replacing the boot.img as well since I had ElementalX installed. My apps are optimizing as we speak. Thank you!
Worked for me. What a hassle!
Here is a summary of the process for those looking for a less wordy procedure, with a few added steps:
Download Nexus 5 5.0 (LRX21O) file (note: NOT 5.0.1 yet) https://developers.google.com/android/nexus/images
Unzip via 7-zip multiple times in order to get boot.img, recovery.img, system.img
Enable USB debugging: http://www.kingoapp.com/root-tutorials/how-to-enable-usb-debugging-mode-on-android-5-lollipop.htm
Plug phone into PC > cmd prompt where adb is installed > type "adb devices" to ensure connection is valid (will need to authorize via popup on phone > then "adb devices" should return your device id and "device"; if it says "unauthorized" then look for the popup on your phone)
adb reboot bootloader
Put system.img, recovery.img, and boot.img in same folder as fastboot.exe
Run commands:
fastboot flash system system.img
fastboot flash recovery recovery.img
fastboot flash boot boot.img
fastboot erase cache (this is optional. I didn't have to do it, but you might)
Use Volume Up/Down to select Start > press Power Button to reboot
Update via Settings > About Phone > System Update
Re-flash TWRP recovery:
Get the file from here: http://forum.xda-developers.com/showpost.php?p=57580889&postcount=1
adb reboot bootloader
fastboot flash recovery openrecovery-twrp-2.8.1.0-hammerhead.img
Paul22000 said:
Worked for me. What a hassle!
Here is a summary of the process for those looking for a less wordy procedure, with a few added steps:
1. Download Nexus 5 5.0 (LRX21O) file (note: NOT 5.0.1 yet) https://developers.google.com/android/nexus/images
2. Unzip via 7-zip multiple times in order to get boot.img, recovery.img, system.img
3. Enable USB debugging: http://www.kingoapp.com/root-tutorials/how-to-enable-usb-debugging-mode-on-android-5-lollipop.htm
4. Plug phone into PC > cmd prompt where adb is installed > type "adb devices" to ensure connection is valid (will need to authorize via popup on phone > then "adb devices" should return your device id and "device"; if it says "unauthorized" then look for the popup on your phone)
5. adb reboot bootloader
6. Put system.img, recovery.img, and boot.img in same folder as fastboot.exe
7. Run commands:
fastboot flash system system.img
fastboot flash recovery recovery.img
fastboot flash boot boot.img
8. Use Volume Up/Down to select Start > press Power Button to reboot
9. Update via Settings > About Phone > System Update
Click to expand...
Click to collapse
Maybe you could add `fastboot erase cache` as stepp 8.
gee2012 said:
Maybe you could add `fastboot erase cache` as stepp 8.
Click to expand...
Click to collapse
I added it to step 7, thanks. :good: I also cleaned up the formatting and added step 10 about re-flashing TWRP.
Loading problem
I flashed system, recovery & boot images strictly following the instructions, restarted the phone. It got stuck in loading where balls in four colors keep running for half an hour. Shall I keep waiting? I think there must be something wrong. Your advises are welcome.
guangy said:
I flashed system, recovery & boot images strictly following the instructions, restarted the phone. It got stuck in loading where balls in four colors keep running for half an hour. Shall I keep waiting? I think there must be something wrong. Your advises are welcome.
Click to expand...
Click to collapse
Try flash the partitions again. If it's still not working, you may need to reflash a factory image.
RunasSudo said:
Try flash the partitions again. If it's still not working, you may need to reflash a factory image.
Click to expand...
Click to collapse
I flashed the cache image as well, then the problem solved. Thanks
Hello, my watch R has 5.1.1 (LDZ22D) stock ROM and it has some problems. I tried factory reset, still not ok. I would like to try flashing again the stock ROM. I have found this thread: http://forum.xda-developers.com/g-watch-r/development/stock-boot-recovery-g-watch-r-t2956964 , i downloaded boot.img, recovery.img and system.img, checked SHA1 but i don't know which version should i try? 5.1.1 (LDZ22D), 5.1.1 (LCA44B), 5.0.2: ??? Are there limitations for downgrade / upgrade ?
And as a guide to flashing...
1. i start watch, swype 11 to 5, so now in fastboot mode i connect to PC, the PC detect the watch as what ?
2. adb devices and if watch is detected i continue.
3. fastboot flash boot boot.img
4. fastboot flash recovery recovery.img
5. fastboot flash system system.img
6. restart
is that ok ?
How long does it take to flash each of those imgs ?
thank you
intersectRaven said:
Notes/FAQ:
1.) I re-mkbootimg-ed them since I'll be uploading 2 x 20+MB files if I didn't. Still has the same SHA1 checksums as the ones being checked by stock ROM so it's safe to flash.
2.) If you're confused on how to download click on the box marked in this pic.
3.) The commands for flashing are as follows:
Boot: fastboot flash boot boot.img
Recovery: fastboot flash recovery recovery.img
System: fastboot flash system system.img
*replace boot.img, recovery.img and system.img with their respective filenames
**how to obtain the fastboot executables and drivers are explained in a separate thread
4.) The system.img provided above are stock and NOT ROOTED. If you want to go completely stock, just flash ALL the 5.0.1 images above.
*only for 5.0.1 since I didn't make a system image for 4.4W.2 or below
Click to expand...
Click to collapse
took that from the link you posted, just conect the watch to the dock while in fastboot mode, search for 15 second adb/fastboot installer, after installing that and the computer detects your watch just follow those steps using cmd and navigating to the directory where the files are at first, remember to install fastboot and adb system wide on the 15 second adb installer
when in fastboot mode the watch is not detected:
C:\Users\user>adb devices
List of devices attached
when i chose "recovery" in fastboot mode (android robot on back with door open and red exclamation mark) i get:
C:\Users\user>adb devices
List of devices attached
410KCHserialnr888 sideload
but the watch says he waits "adb sideload <filename>"
what i am doing wrong ? something else had to be done ?
thank you
you can use adb to boot watch on bootloader, but it is not needed since you can boot into fastboot already, problem is the watch is not detected on fastboot mode, try finding some drivers or something, what i usually do is download cydia impactor and select usb then let it do the driver stuff for me, quote me next time so i can get notified when you respond
I have been away from Android for a little while - but I'm coming to sell my Nexus 6, and so I'm attempting to flash the latest OS from google.
I downloaded 6.0.1 from google, and then worked through these steps:
fastboot flash bootloader C:/image-shamu-XXXXXX/bootloader.img
fastboot reboot-bootloader
fastboot flash radio C:/image-shamu-XXXXXX/radio.img
fastboot reboot-bootloader
fastboot flash system C:/image-shamu-XXXXXX/system.img
Yes, there are more steps, but I just can't get to them! Once I flash system I get the following...
target reported max download size of 536870912 bytes
sending sparse 'system' (517178 KB)...
OKAY [ 25.080s]
writing 'system'...
OKAY [ 7.142s]
sending sparse 'system' (515137 KB)...
OKAY [ 25.155s]
writing 'system'...
OKAY [ 7.346s]
sending sparse 'system' (515644 KB)...
Thats it, thats as far as it ever goes, then I just sit there waiting, waiting, and nothing happens.
Any suggestions?
Updated Android SDK Tools to make sure you have the latest fastboot? If you haven't updated, update these.
Here's the commands I run, keep in mind this will completely wipe all data/apps/files from the device, so backup anything you want saved to a computer before doing this. Is it overkill? Sure, but I've never had an issues across multiple devices, so since, for me at least, if it isn't broke I'll keep doing this:
Erase:
Code:
fastboot erase boot
fastboot erase cache
fastboot erase recovery
fastboot erase system
fastboot erase userdata
Flash bootloader:
Code:
fastboot flash bootloader "name of bootloader"
fastboot reboot-bootloader
Flash radio:
Code:
fastboot flash radio "name of radio"
fastboot reboot-bootloader
Flash img files:
NOTE: The system.img is large, so if your Android SDK tools isn't updated, you could get an error. This part does take a few minutes to do, so be patient and give it time to complete.
Code:
fastboot flash system system.img
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash cache cache.img
fastboot flash userdata userdata.img
Reboot device:
Code:
fastboot reboot
Just a thought, prompted by the commands in the original post referring to the C: drive. I didn't even know you could do this, though I suppose it makes sense. The easier method IMO is to copy or move all the image files to the ADB/Fastboot folder, rename them if necessary for simpler typing, then just "fastboot flash system system.img", etc., as RMarkwald says.
I doubt that it will make any difference, but since you appear to be stuck it might be worth trying - worst case, it fails again...
And just for curiosity, did you try flash-all.bat? I know that people have trouble with it and fall back on the separate flashing steps - just wondering if that's why you're doing it this way.
dahawthorne said:
Just a thought, prompted by the commands in the original post referring to the C: drive. I didn't even know you could do this, though I suppose it makes sense. The easier method IMO is to copy or move all the image files to the ADB/Fastboot folder, rename them if necessary for simpler typing, then just "fastboot flash system system.img", etc., as RMarkwald says.
I doubt that it will make any difference, but since you appear to be stuck it might be worth trying - worst case, it fails again...
And just for curiosity, did you try flash-all.bat? I know that people have trouble with it and fall back on the separate flashing steps - just wondering if that's why you're doing it this way.
Click to expand...
Click to collapse
Good call on the movement of files to the adb/fastboot folder, as that is what I do when flashing these files, and the flash-all.bat potentially causing his issues.
RMarkwald said:
Updated Android SDK Tools to make sure you have the latest fastboot? If you haven't updated, update these.
Here's the commands I run, keep in mind this will completely wipe all data/apps/files from the device, so backup anything you want saved to a computer before doing this. Is it overkill? Sure, but I've never had an issues across multiple devices, so since, for me at least, if it isn't broke I'll keep doing this:
Erase:
Code:
fastboot erase boot
fastboot erase cache
fastboot erase recovery
fastboot erase system
fastboot erase userdata
Flash bootloader:
Code:
fastboot flash bootloader "name of bootloader"
fastboot reboot-bootloader
Flash radio:
Code:
fastboot flash radio "name of radio"
fastboot reboot-bootloader
Flash img files:
NOTE: The system.img is large, so if your Android SDK tools isn't updated, you could get an error. This part does take a few minutes to do, so be patient and give it time to complete.
Code:
fastboot flash system system.img
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash cache cache.img
fastboot flash userdata userdata.img
Reboot device:
Code:
fastboot reboot
Click to expand...
Click to collapse
Having all kinds of trouble rerooting my 6. Will this relock the bootloader? Wanted to keep user data but if a fresh start is what I need then OK. TIA
Mongo23ny said:
Having all kinds of trouble rerooting my 6. Will this relock the bootloader? Wanted to keep user data but if a fresh start is what I need then OK. TIA
Click to expand...
Click to collapse
No, you have to run "fastboot oem lock" to lock the bootloader, not recommended.
You perform above steps, boot device and go through setup, enable USB debugging, boot to bootloader and flash TWRP, boot to TWRP. You will need to clean up some space to flash SuperSU (you'll have to remove apps from /system/app or /system/priv-app), as there will not be any space on /system to install/flash anything that needs to live there, it either won't work or error out. Once you have removed system apps and create space on /system, you can flash your SuperSU zip, then reboot the phone.
RMarkwald said:
No, you have to run "fastboot oem lock" to lock the bootloader, not recommended.
You perform above steps, boot device and go through setup, enable USB debugging, boot to bootloader and flash TWRP, boot to TWRP. You will need to clean up some space to flash SuperSU (you'll have to remove apps from /system/app or /system/priv-app), as there will not be any space on /system to install/flash anything that needs to live there, it either won't work or error out. Once you have removed system apps and create space on /system, you can flash your SuperSU zip, then reboot the phone.
Click to expand...
Click to collapse
I don't wanna relock the bootloader. Not sure what to remove from system apps, etc. This was not this difficult the first time I rooted. Thanks for any and all help.
This is off-topic from the original question, but let's go with it...
Personally I've never had to remove anything from system. Clean install, flash TWRP (or just temporarily boot into it), flash SuperSU v2.67. Job done. Since it (probably) doesn't try to install into system, there shouldn't be any problem.
@dannstarr - you haven't answered my question.
dahawthorne said:
This is off-topic from the original question, but let's go with it...
Personally I've never had to remove anything from system. Clean install, flash TWRP (or just temporarily boot into it), flash SuperSU v2.67. Job done. Since it (probably) doesn't try to install into system, there shouldn't be any problem.
@dannstarr - you haven't answered my question.
Click to expand...
Click to collapse
Do I keep system read only in twrp 3.0.0.0?
Disregard, did everything suggested by rmarkwald and dahawthorne. Worked well, took some security update that happened to get rid of the corrupt phone boot message. Flashed twrp 3.0.0.0 and installed SuperSU 2.67 with no problems. Thanks all.
Hey,
I enrolled to the Android Nougat program and rooted my phone (chainfire) a few days ago. Decided to un-root (using superSU), and it said I was unrooted. After doing the un-rooting, the OEM unlock-option was greyed out (and on OFF setting), but the phone recovery says it's unlocked api 3.... I pretty much just wanted to unenroll and go back to MM. Every time I choose unroll from Google, download the MM OTA and it reboots I get an error. Just an image of android with message "ERROR". The only way to get the phone working is to do a hard reset and go back to Nougat.
Not quite sure what is wrong here. Any suggestions?
It's probably because the SuperSU unroot hasn't cleaned up everything that the MM installer checks for. Your best bet is to use the sideload OTA here:
https://developers.google.com/android/nexus/ota
to install MM again. It's quick and easy, and doesn't touch your data.
Since you received the actual uninstall OTA you must have successfully unenrolled, so you should be ok from now on.
dahawthorne said:
It's probably because the SuperSU unroot hasn't cleaned up everything that the MM installer checks for. Your best bet is to use the sideload OTA here:
https://developers.google.com/android/nexus/ota
to install MM again. It's quick and easy, and doesn't touch your data.
Since you received the actual uninstall OTA you must have successfully unenrolled, so you should be ok from now on.
Click to expand...
Click to collapse
I received the OTA but while installing MM it gives me an error, so I have to go back to Nougat every time. I've tried the unenroll option several times and it gives me the same "error" every time. So, I should try manually flashing MM, then?
UPDATE:
I tried the following:
Downloaded and tried to sideload 6.0.1 (MOB30W) to my Nexus 6-device. It got up to 46% and after it gave me and error saying:
WARNING: No file_contexts. This package is for shamu devices; this is a "".
E: Error in /sideload/package.zip
Status 7
Installation aborted.
UPDATE2:
Tried another package. Didn't work. All the OTA updates stop at 46% giving me the same error. Device remains unlocked, but appears not to be rooted. Still stuck on Nougat.
What does "Tried another package" mean?
It may be that your download was corrupt. I always check the SHA with this checksum utility:
http://download.cnet.com/MD5-SHA-Checksum-Utility/3000-2092_4-10911445.html
though I've read in the instructions that the Android installation itself checks the package - it may be this error that the installation is reporting.
dahawthorne said:
What does "Tried another package" mean?
It may be that your download was corrupt. I always check the SHA with this checksum utility:
http://download.cnet.com/MD5-SHA-Checksum-Utility/3000-2092_4-10911445.html
though I've read in the instructions that the Android installation itself checks the package - it may be this error that the installation is reporting.
Click to expand...
Click to collapse
No, the checksum is fine. The package is fine. I mean I tried several OTA packages for N6 and it always stops at 46%. There's something else going on here. Maybe if I re-root with chainfire and the use another method to unroot it? Which is the correct method, I have no idea?
Factory reset, and try sideloading MOB30W again.
dahawthorne said:
Factory reset, and try sideloading MOB30W again.
Click to expand...
Click to collapse
Done it like 5 times already. Also wiped cache. No help.
Hannes084 said:
Done it like 5 times already. Also wiped cache. No help.
Click to expand...
Click to collapse
My suggestion is to go back to Android N, root with SuperSU and see if your OEM UNLOCK toggle in Developer Options is working again and not greyed out. Then I would fastboot flash back to MM and install TWRP and SuperSu.
Sent from my Nexus 6 using XDA-Developers mobile app
Dude, just flash the system image you want. Forget about the OTA
The OTA is a system image.
fast69mopar said:
My suggestion is to go back to Android N, root with SuperSU and see if your OEM UNLOCK toggle in Developer Options is working again and not greyed out. Then I would fastboot flash back to MM and install TWRP and SuperSu.
Sent from my Nexus 6 using XDA-Developers mobile app
Click to expand...
Click to collapse
Root with SuperSU? I think you mean with chainfire?
dahawthorne said:
The OTA is a system image.
Click to expand...
Click to collapse
You could say the new full otas are, but you can't go flashing them freely over newer images.
The unenroll option resets the phone anyways, so the best and aparently the only option for him is to flash the system image he wants from scratch.
blanco2701 said:
You could say the new full otas are, but you can't go flashing them freely over newer images.
The unenroll option resets the phone anyways, so the best and aparently the only option for him is to flash the system image he wants from scratch.
Click to expand...
Click to collapse
Sorry for asking but how would I even do that? I'm on Ubuntu 12, so it seems mega complicated.
Hannes084 said:
Sorry for asking but how would I even do that? I'm on Ubuntu 12, so it seems mega complicated.
Click to expand...
Click to collapse
Well my friend I have no idea since I'm on Windows. Google how to use adb and fastboot on ubuntu, there should be a solution for you.
This is a script that I used to run before the full OTAs became available. It worked many times for me, but the usual caveat - you follow it at your own risk. You can probably skip the backup step in your situation.
Preparation.
- Take a TWRP backup and save it on your PC.
- Download factory image and unzip all files, including the zip within the zip. Rename the *.img files to the names below. Copy all of them to the same folder as your ADB/fastboot executables.
- Download the relevant TWRP and rename to twrp.img - also put in ADB/fastboot folder.
- Copy SuperSU to device (if root wanted).
- Set USB debugging in Developer options & attach to your PC.
- Open a CMD window and check connectivity with "adb devices". If it's ok, copy & paste each command below into the CMD window and run them - the only lengthy one is the system.img.
1. adb reboot bootloader
2. fastboot flash bootloader bootloader.img
3. fastboot reboot-bootloader
4. fastboot flash radio radio.img
5. fastboot reboot-bootloader
6. fastboot erase system
7. fastboot flash system system.img
8. fastboot erase boot
9. fastboot flash boot boot.img
10. fastboot erase cache
11. fastboot flash cache cache.img
12. fastboot reboot-bootloader
13. fastboot flash recovery twrp.img
14. From bootloader boot to TWRP and reflash superSu
dahawthorne said:
This is a script that I used to run before the full OTAs became available. It worked many times for me, but the usual caveat - you follow it at your own risk. You can probably skip the backup step in your situation.
Preparation.
- Take a TWRP backup and save it on your PC.
- Download factory image and unzip all files, including the zip within the zip. Rename the *.img files to the names below. Copy all of them to the same folder as your ADB/fastboot executables.
- Download the relevant TWRP and rename to twrp.img - also put in ADB/fastboot folder.
- Copy SuperSU to device (if root wanted).
- Set USB debugging in Developer options & attach to your PC.
- Open a CMD window and check connectivity with "adb devices". If it's ok, copy & paste each command below into the CMD window and run them - the only lengthy one is the system.img.
1. adb reboot bootloader
2. fastboot flash bootloader bootloader.img
3. fastboot reboot-bootloader
4. fastboot flash radio radio.img
5. fastboot reboot-bootloader
6. fastboot erase system
7. fastboot flash system system.img
8. fastboot erase boot
9. fastboot flash boot boot.img
10. fastboot erase cache
11. fastboot flash cache cache.img
12. fastboot reboot-bootloader
13. fastboot flash recovery twrp.img
14. From bootloader boot to TWRP and reflash superSu
Click to expand...
Click to collapse
If I download the factory image (OTA) off google's site it has none of those files under the zip-folder.
Hannes084 said:
If I download the factory image (OTA) off google's site it has none of those files under the zip-folder.
Click to expand...
Click to collapse
One thing is the OTA image, and another is the Factory Image.
Download the factory image from here.
https://developers.google.com/android/nexus/images#shamu
Unzip everything and you should get all the files needed. As I said before, you would need to have a computer with adb and fastboot installed.
blanco2701 said:
One thing is the OTA image, and another is the Factory Image.
Download the factory image from here.
https://developers.google.com/android/nexus/images#shamu
Unzip everything and you should get all the files needed. As I said before, you would need to have a computer with adb and fastboot installed.
Click to expand...
Click to collapse
Thanks, doing that now!
Hannes084 said:
Thanks, doing that now!
Click to expand...
Click to collapse
Just be sure to have selected "oem unlocking" in the developer options, make a backup (everything will be wiped), and start flashing!. There are several guides everywhere.
Hey guys,
Need some help here as I've checked everywhere I possibly can and can't find the answer. I've rooted phone then installed miui 6 rom which worked but i didnt like it. Then I tried to install my rom 3.3 and everything got fuked up. Now when i power on my phone it is in bootloop. At this moment i am only able to use twrp 2.7.1.0(only recovery that is working) and fastboot. I've tried wiping data through recovery and still nothing. Anyways my bootloader isunlocked. .
Also I've tried the forced update method to get it working again but for some reason I cant start it, just a bootloop.
When i try to install custom rom it just give me message "unable to mount data". Same message i get when i try to do factory reset or wipe data.
Appreciate the help guys.
Tomislav995 said:
Hey guys,
Need some help here as I've checked everywhere I possibly can and can't find the answer. I've rooted phone then installed miui 6 rom which worked but i didnt like it. Then I tried to install my rom 3.3 and everything got fuked up. Now when i power on my phone it is in bootloop. At this moment i am only able to use twrp 2.7.1.0(only recovery that is working) and fastboot. I've tried wiping data through recovery and still nothing. Anyways my bootloader is unlocked. .
Also I've tried the forced update method to get it working again but for some reason I cant start it, just a bootloop.
When i try to install custom rom it just give me message "unable to mount data". Same message i get when i try to do factory reset or wipe data.
Appreciate the help guys.
Click to expand...
Click to collapse
The force update will not work since you replaced the stock recovery from Huawei with TWRP.
Follow these steps:
1. Go to Huawei's website and download the UPDATE.APP package.
2. Go to Huawei's website and download the Update Extractor tool.
3. Use the downloaded tool to extract the UPDATE.APP package. Then you should have a folder filled with .img files such as system.img, recovery.img etc.
4. Connect your device to your PC and enter fastboot on your Ascend P7 device
5. Open up Command Prompt or Terminal (cmd for Windows, terminal for Linux) and go to the directory where fastboot is installed
6. Check to see if your PC finds your device using the command: "fastboot devices". If successful, you should find your phone listed.
7. Flash this partition images using these commands:
"fastboot flash boot /path/to/your/images/boot.img"
"fastboot flash system /path/to/your/images/system.img"
"fastboot flash cache /path/to/your/images/cache.img"
"fastboot flash cust /path/to/your/images/cust.img"
"fastboot flash userdata /path/to/your/images/userdata.img"
5. Reboot your device
Now if successful, your phone should have EMUI installed on it. Hope this helps you.
MihaiChirculete said:
The force update will not work since you replaced the stock recovery from Huawei with TWRP.
Follow these steps:
1. Go to Huawei's website and download the UPDATE.APP package.
2. Go to Huawei's website and download the Update Extractor tool.
3. Use the downloaded tool to extract the UPDATE.APP package. Then you should have a folder filled with .img files such as system.img, recovery.img etc.
4. Connect your device to your PC and enter fastboot on your Ascend P7 device
5. Open up Command Prompt or Terminal (cmd for Windows, terminal for Linux) and go to the directory where fastboot is installed
6. Check to see if your PC finds your device using the command: "fastboot devices". If successful, you should find your phone listed.
7. Flash this partition images using these commands:
"fastboot flash boot /path/to/your/images/boot.img"
"fastboot flash system /path/to/your/images/system.img"
"fastboot flash cache /path/to/your/images/cache.img"
"fastboot flash cust /path/to/your/images/cust.img"
"fastboot flash userdata /path/to/your/images/userdata.img"
5. Reboot your device
Now if successful, your phone should have EMUI installed on it. Hope this helps you.
Click to expand...
Click to collapse
I tried that long ago, but it said it cant write to data or smth like that.