Hi, I tried changing my battery with rom toolbox and accidentally got it at an AT&T boot logo loop, I tried going into recovery and wiping but have the same problem and I can get it into download mode ive also tried redoing the kernel in Odin. Idk what to do now. Btw my phone is rooted but the battery thing is what caused the problem because my phone froze and i rebooted.
If u had a Dev'd Rom runnin before the trouble, just reboot into recovery and reinstall the Rom. Try that first.
And more info about what rom u r runnin would be useful. More info = :thumbup: and less info = :what:
But if u were just stock with root...u may just have to Odin or Heimdall back to Stock.
Sent from my SAMSUNG-SGH-I777 using xda premium
4-2ndtwin said:
If u had a Dev'd Rom runnin before the trouble, just reboot into recovery and reinstall the Rom. Try that first.
And more info about what rom u r runnin would be useful. More info = :thumbup: and less info = :what:
But if u were just stock with root...u may just have to Odin or Heimdall back to Stock.
Sent from my SAMSUNG-SGH-I777 using xda premium
Click to expand...
Click to collapse
Yea i tried flashing before all of this i was trying to upgrade to jelly bean from gingerbread could you maybe give me some instructions to reinstall the gingerbread (or maybe upgrade to jelly bean if possible) sorry i'm kinda new to messing with my phone like this. im running gingerbread 2.3.5 currently and had the KK4 stock kernal idk what i should do with that though
Well since u r running stock kk4 then u r good with the kk4 bootloaders. So basically all u need is a kernel that has cwm recovery included...like the KK4 Corn Kernel. Odin flash the .tar version of it. Reboot into the cwm and select to install JB rom. It will reboot quickly into the Rom's cwm recovery and from that select to install the JB Rom again. Install the Gapps afterwards. Success.
TRussello put together a flashin guide in the Q & A forum. It is a sticky thread. U could check it out as well.
Be sure and read a lot and know what u r doing before u do it...because in the end only u r to blame if u jack up ur phone.
Sent from my SAMSUNG-SGH-I777 using xda premium
4-2ndtwin said:
Well since u r running stock kk4 then u r good with the kk4 bootloaders. So basically all u need is a kernel that has cwm recovery included...like the KK4 Corn Kernel. Odin flash the .tar version of it. Reboot into the cwm and select to install JB rom. It will reboot quickly into the Rom's cwm recovery and from that select to install the JB Rom again. Install the Gapps afterwards. Success.
TRussello put together a flashin guide in the Q & A forum. It is a sticky thread. U could check it out as well.
Be sure and read a lot and know what u r doing before u do it...because in the end only u r to blame if u jack up ur phone.
Sent from my SAMSUNG-SGH-I777 using xda premium
Click to expand...
Click to collapse
I have already done the part with the part with flashing the kernel but i still have the same problem and i have CWM recovery. I put KK4 stock kernel.tar into the PDA area and start then it reboots and then i have the same problem. I also tried wiping from CWM and it did nothing.
Here is Stock KK4 without bootloaders...http://forum.xda-developers.com/showthread.php?p=18370912
Here is KK4 Corn Kernel...http://forum.xda-developers.com/showpost.php?p=18233847&postcount=1
Download mode. Odin to Stock. Odin .tar Corn Kernel. Reboot to CWM. Install JB (twice). Install Gapps. :thumbup:
Sent from my SAMSUNG-SGH-I777 using xda premium
4-2ndtwin said:
Here is Stock KK4 without bootloaders...http://forum.xda-developers.com/showthread.php?p=18370912
Here is KK4 Corn Kernel...http://forum.xda-developers.com/showpost.php?p=18233847&postcount=1
Download mode. Odin to Stock. Odin .tar Corn Kernel. Reboot to CWM. Install JB (twice). Install Gapps. :thumbup:
Sent from my SAMSUNG-SGH-I777 using xda premium
Click to expand...
Click to collapse
ok i did it with the corn kernel but now it just gets to the AT&T screen then to a system corps screen with a loading bar and then reboots in a loop sometimes it gets futher than and sometimes. I flashed it in odin
Related
I want to revert back to Stock GB from CM9. .Can i flash with mobile Odin??
flashing with Pc odin gives yellow triangle. .I dont want to that
It is not flashing with Odin that gives the red triangle. It is rooting your phone that does it. I used Odin to get rid of the red triangle (though the phone obviously still retains it's custom binary count)
I just downloaded the following ROM and flashed it with ODIN -
N7000XXLC1---------2.3.6-------2012 March----------N7000OXALC1-----------Open Europe----------------------------- Download (wipe)
I lost the triangle, lost root and gained a stock Galaxy Note.
Flashing stock Roms using PC Odin never gives you the triangle. Flashing custom kernels, Roms does.
chasmodo said:
Flashing stock Roms using PC Odin never gives you the triangle. Flashing custom kernels, Roms does.
Click to expand...
Click to collapse
Just as he said.. but if don't wana use Odin at all..then download the custom gb rom you want and download abyss3.9 kernel in your SD card..den do the following steps..
1.. go to recovery
2.. flash abyss kernel 3,9..
3.. don't reboot system...DONT...!!..
4.. go to advanced and select reboot recovery.. you will then reboot to abyss cwm recovery
5.. flash the gb rom you just downloaded..and reboot..
Okay first of all, flashing ANY STOCK ROM with PC Odin won't increase your binary counter, i.e. no yellow triangles.
Flashing ANYTHING (ROM obviously) with Mobile Odin won't give you the yellow triangle. Flashing non-stock or custom ROM with PC Odin will increase your binary counter.
So, just download any stock GB ROM from the development section and flash it with PC Odin. Simple!
I'm on Stock GB and wanna try CM9 ICS & other ICS roms... I know i have to flash Chainfire repack first, but which..?! There are more than one version...
kojinmalia said:
I'm on Stock GB and wanna try CM9 ICS & other ICS roms... I know i have to flash Chainfire repack first, but which..?! There are more than one version...
Click to expand...
Click to collapse
Just flash ICS repack from CF which is available in Forum.. .. i guess it doesn't matter which one.. i have been flashing the old one whenever i go back to GB then come to ICS... i have done it many times now without any problems..
The one i found says NO WAY TO RETURN TO GB. So please give me link to the one you installed...
1. You CAN go back. Don't worry!
Here:
http://forum.xda-developers.com/showpost.php?p=22758543&postcount=6
2. Flash this http://www.mirorii.com/fichier/3/501208/I9220LP1-N7000-ICS-REPACK-tar.html
Chainfire ICS LP1 Repack!
Just read the ICS Stunner forum.. It will help you a lot!
Thanks for all this. I tried all links and all goes @50ko/s Gonna search for it elsewhere.
kojinmalia said:
Thanks for all this. I tried all links and all goes @50ko/s Gonna search for it elsewhere.
Click to expand...
Click to collapse
DO NOT FLASH THE LP5 CHAINFIRE REPACK!! ONLY FLASH THE LP1 REPACK! THE LP1 IS THE ONE YOU WANT!
Sent from my GT-N7000 using Tapatalk
Thanks, now that's finally clear! But i couldn't find other links for it...
Sent from my GT-N7000 using XDA
Ok I'm getting it finally! But why 828mb on rapidshare & 790mb on all others... Scary!! So i flash this with odin (can't with mobile?) and right after, install stunner or other rom. Right?
Sent from my GT-N7000 using XDA
kojinmalia said:
Ok I'm getting it finally! But why 828mb on rapidshare & 790mb on all others... Scary!! So i flash this with odin (can't with mobile?) and right after, install stunner or other rom. Right?
Sent from my GT-N7000 using XDA
Click to expand...
Click to collapse
Flash it with Mobile Odin (Pro recommended) keeping all the options of Everroot checked. DONT flash with PC odin ...u wont get root if you do that.
Reboot and let the rom settle. Then go to recovery and then flash Stunner or any other ics rom you want.
Cheers! Enjoy your Note.
Hit thanks if it helped
I'm late in the discussion but this topic interests me.
But why can't you just restore Nandroid back using CWM from your GingerBread backup Nandroid?
(you did Nandroid your previous GB rom before you went to ICS, correct?)
I started out trying to go from some 2.x rom (May have been Serendipity) to the CM10 v4 (JB), which worked fine. I stayed on the v4 for a few days, then v6 came out and I tried to update to that. I got Status 7 errors no matter what I did (redownloaded rom several times, did everything I could think of and everything suggested in other threads), so I gave up on that and decided to just go back to GB. All stock roms I've flashed through Odin have worked just fine.
So, I flash UCKJ3 (stock GB 2.3.5) with bootloaders using Odin, but the recovery on that version doesn't let me switch over to CWM for some reason, so I use Odin to go back to UCJF6 (stock Eclair 2.1) without bootloaders and use the recovery there to switch to CWM. Now I'm in CWM and trying to flash KK4 Legend 5 (http://forum.xda-developers.com/showthread.php?t=1391192), and it all goes fine. I reboot and get the Corn Kernel loading screen, the loading bar fills... and then it freezes on that screen.
I then flash back to stocks using the same process and flash the MPD version of KK4 Legend 5, same problem. I also tried flashing Corn Kernel 7.0A, rather than 7.06 which comes with the rom. Some people said that helped, but it didn't.
Okay, I'll just use a different rom. I figured since I was using Serendipity before, I'll try that. I download 6.4, and flash back to stock UCJF6, like the instructions say to, then install Serendipity through CWM. It "boots" to a black screen with the bottom four buttons lit up.
Am I doing something wrong that is causing these roms to fail?
Edit: I am now using Odin to flash UCKJ3 (stock GB 2.3.5) with bootloaders, then using Odin to flash the kernel with CWM. When I install KK4 Legend 5 from that CWM, it bootloops when the loading bar gets to the middle.
Perplexing.
That kj3 Odin package must not be Re-partitioning...
Try using one of the i897ucKK4 One Clicks in my post here... Stock i897ucKK4, Odin or Heimdall, Full Wipe, Re-partition, with or without GB Bootloaders .
This should get u takin care of. No need to flash the ones with gb bootloaders if u already have them installed. Once u r on kk4, then Odin flash the KK4 Corn Kernel v7.0A and go from there to install Dev Rom.
Sent from my SAMSUNG-SGH-I777 using xda premium
4-2ndtwin said:
That kj3 Odin package must not be Re-partitioning...
Try using one of the i897ucKK4 One Clicks in my post here... Stock i897ucKK4, Odin or Heimdall, Full Wipe, Re-partition, with or without GB Bootloaders .
This should get u takin care of. No need to flash the ones with gb bootloaders if u already have them installed. Once u r on kk4, then Odin flash the KK4 Corn Kernel v7.0A and go from there to install Dev Rom.
Sent from my SAMSUNG-SGH-I777 using xda premium
Click to expand...
Click to collapse
From what I rember that kj3 package does not do a repartition. Its great if you don't need the repartition cause it has a cwm kernel baked in. But coming from an ICS ROM you will need the repartition found in the one click previously mentioned because ICS uses a different partition table.
I have tried to flash speedmod kernel and use CWM from there but when i try to flash a rom it doesnt work and when i try to reboot it gets stuck at the boot animation. is there a way you can install CWM recovery that actually works? also if you can find an app like SGS kernel flasher except that flashes roms instead? i have tried using ROM Manager to flash CWM but all that happens is it says successfully flashed CWM recovery then when i boot into recovery it goes into android recovery 3e.
Rooted Samsung Captivate i897
use one click back to stock
Hello, what I do every time im stuck is go back to stock KK4 using one click odin.
from there then I use Odin 1.85 to flash Korn kernel.
Korn kernel include cwm, from there you can install other Roms or kernels, or just root.
regards.
Zestar said:
Hello, what I do every time im stuck is go back to stock KK4 using one click odin.
from there then I use Odin 1.85 to flash Korn kernel.
Korn kernel include cwm, from there you can install other Roms or kernels, or just root.
regards.
Click to expand...
Click to collapse
In addition to what Zestar suggested I would recommend the KK4 with boot loaders.
Sent from my SGH-I897 using xda app-developers app
Same thing with mine.
I want to have a cwm recovery, but i'm afraid to bricked again my captivate. Can someone make a step-by-step on how to get a cwm recovery?
thanks.
Sent from my SAMSUNG-SGH-I897 using xda premium
vergtot said:
Same thing with mine.
I want to have a cwm recovery, but i'm afraid to bricked again my captivate. Can someone make a step-by-step on how to get a cwm recovery?
thanks.
Sent from my SAMSUNG-SGH-I897 using xda premium
Click to expand...
Click to collapse
Would help to know what is your goal (flash rom, kernel, modem or simply having cwm recovery). There is a well written guide in the Q&A: http://forum.xda-developers.com/showthread.php?t=1350266
But Zestar pretty much explained it. You'll need Odin 1.85 (which you will find in the guide) and a custom kernel (doesn't matter much which one as long as it supports cwm recovery). You have a lot of reading to do before jumping into this and I highly suggest it! I also bricked once outta being hasty, won't happen again
Hello guys,
So I just downloaded the leaked official JB ROM for my N7000 and flashed it successfully via Odin (I came from the latest CM10 Nightly build).
After that I wanted to flash the latest Hydracore to have my phone rooted, but apparently it comes in .zip format only.
Since I'm not rooted and I don't have CWM now, how can I get to flash Hydracore via PC Odin?
Hope someone has the answer for this, as the internet is just full of bullocks all websites are describing the same non working procedure....
Thanks all
//M
Sent from my GT-P6800 using xda app-developers app
latest jb leak does not work with hydracore. If you want to root use philz kernel zip file and install using stock recovery.
Sent from my GT-N7000 using xda premium
Thanks much
will do so... I already flashed Hydracore and now I'm stuck @ Samsung's logo
Hopefully I won't face such issues again
Sent from my GT-P6800 using xda app-developers app
Well, I've downloaded both v3.65 .zip files (XXLSA and XXLS7) and tried flashing them through CWM which was already on the device.
After rebooting either, it goes into a black screen after the initial boot screen (Galaxy Note GT-N7000).
Bear in mind I had already flashed Hydracore before that...
Any helpers as to what I'm doing wrong?
Should I reflash the stock ROM via PC Odin then flash Philz kernel via stock recovery?
Thanks in advance
P.S. I know I messed up big time
As what my friend nokia said. Hydracore is not compatible with jb leaks rom.
I m not so sure which kernel u r now, since u stuck at boot logo.
And I don't want to decide too fast that u have bricked ur phone.
Just try to flash the firmware again through odin. If u can, and can boot up, try to flash philz kernel from stock recovery.
Sent from my GT-N7105, at the corner of this rounded earth.
antique_sonic said:
As what my friend nokia said. Hydracore is not compatible with jb leaks rom.
I m not so sure which kernel u r now, since u stuck at boot logo.
And I don't want to decide too fast that u have bricked ur phone.
Just try to flash the firmware again through odin. If u can, and can boot up, try to flash philz kernel from stock recovery.
Sent from my GT-N7105, at the corner of this rounded earth.
Click to expand...
Click to collapse
That's what I'm thinking and doing now, wish me luck
I've also downloaded xxlsa to have 4.1.2 .. according to online tutorials I should flash cf-root via odin, then flash the rom via CWM .. any thoughts?
[Update - 1] phone is ok, re-flashed the stock firmware via PC Odin and it is working now, no problem! tried flashing cf-root, got stuck at the yellow triangle screen and nothing happens ... so I reflashed the stock rom again.
will try now to flash cf-root then boot into recovery, i just might be lucky
[Update - 2] upgraded to JB 4.1.2 successfully and rooted!
So which kernel are you using? and which Jelly bean?
Ok so using Odin oneclick to unbrick my semibrick samsung captivate its all set and good, but then i root it. Thats successful as well, but then i try to use odin 3.07 to install the GB Kernel after installing the rooted MUGU into it and when my phone boots it INSTANTLY glitches and i have to go back to Odin oneclick to bring it back to 2.1 which i believe is Eclair.
Any help would be appreciative and thank you
I believe ur problem is that u r trying to flash a GB kernel on Eclair firmware. So...
Update to Android 2.3.5 Gingerbread here...Stock GB i897ucKK4
You will need to use a one click with the GB Bootloaders. Heed all warnings about flashing BLs. U do not want to break the connection during the few seconds that the bootloaders are being flashed, i.e. power, usb/micro usb cable. And once u have flashed the Stock GB KK4 one click with bootloaders, there is no need for u to flash back to stock eclair with its bootloaders. If u ever need to flash back to a Stock firmware to fix something or whatever, just use one of the KK4 one clicks without the bootloaders included.
Get Root and/or KK4 Corn Kernel that has CWM Recovery included so that u can move on to flashing Dev Roms here...[Utility] KK4 Easy Root. See post 4 in this thread for a working download link.
Read carefully. Read some more. Understand what ur doing and the risks involved. Proceed. Enjoy. Be sure to at least hit the Dev's thanks buttons because they have worked hard and spent a lot of time doing what they do.
Ok so if i remember correctly(i am not on my comouter right now) odin 3.07 has a BL slot and the PDA slot. If i input the GB BL into the BL slot and the KK4 into the kernel slot would i be able to run them under the same odin setup or would i have to run the BL restart my phone into download mode and THEN run it again? Sorry im a huge noob when it comes to flashing, i onlt found out about it from my stepdad who put Darkstar on his Note
Sent from my SAMSUNG-SGH-I897 using xda app-developers app
The Odin or Heimdall One Clicks that I linked above will do it all for u. There are instructions included in those downloads.
Sent from my SGH-I777 using xda premium
Thank you very much
Sent from my SAMSUNG-SGH-I897 using xda app-developers app