today i've got my S1 i9000 , and i am not new in this all development on android, i already flashing roms for S3 and S2 .
so tried to flash ROMS from the forum , and the problem is when i get to CWM , trying to flash the zip folder in the middle of the Installation like
20% completed the device shuts down shows the logo of the new rom and start bootlooping.
i have proper root and a basic CWM , i did wipe data and cache. the rom i was trying is VorteX 0.1 JB.
It's installing a new partition layout. Just reboot into recovery and install the same ROM again, it well finish installation this time.
Sent from my GT-I9000 using xda premium
NIMBAH said:
It's installing a new partition layout. Just reboot into recovery and install the same ROM again, it well finish installation this time.
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
i cant , after installing, the device start bootlooping and i cant access CWM , i need to restore new firmware 2.3.6 via odin
Hey Guys,
So I updated Rom Manager to latest version and now in 'Manage/Restore backups' my backup was missing so I thought no probs I'll just restore previous version with Tit backup - but I still cannot see backup ?
I tried fixing permissions and also moving file out then back into CWM backup folder but this didn't work either -
so any idea's ?
Quote:
Originally Posted by NIMBAH
It's installing a new partition layout. Just reboot into recovery and install the same ROM again, it well finish installation this time.
Sent from my GT-I9000 using xda premium
i cant , after installing, the device start bootlooping and i cant access CWM , i need to restore new firmware 2.3.6 via odin
Click to expand...
Click to collapse
There are several threads on how to flash to JB, and coming from JB you have to flash to ICS first. Here is a good flash guide on JB->ICS: http://forum.xda-developers.com/showthread.php?t=1494493 When you flash in CWM to ICS you'll get a "quick" installation (about 20/30% as you say) and then the device reboots to a "bootloop". This happens because change in kernel. You can just pull the battery after the kernel has been flashed and insert battery while holding down 3-button combo to force into CWM. Now run the .zip again and it should flash properly in the new CWM and kernel.
Check here for more common problems and fixes: http://forum.xda-developers.com/showthread.php?p=30415128#post30415128
good luck!
Related
Hello,
I have a problem with flasinh my phone on slim bean
I'm on 2.3.6 version of gingerbred and i have rooted my phone and have installed cwm.
I have read that i need to flash my phone on cm9 or 10 and i tryed this.I have installed cm but then my phone didn't turn on -.- and I tryed about 10 times
Can somebody tell me what is the problem?
max_x said:
Hello,
I have a problem with flasinh my phone on slim bean
I'm on 2.3.6 version of gingerbred and i have rooted my phone and have installed cwm.
I have read that i need to flash my phone on cm9 or 10 and i tryed this.I have installed cm but then my phone didn't turn on -.- and I tryed about 10 times
Can somebody tell me what is the problem?
Click to expand...
Click to collapse
You sure you have enough battery on your phone? Go to download mode again and flash gingerbread, root the phone. Then copy the slim bean into your internal SD card. Now go into CWM and do three wipes (Cache, Dalvik and Data). And flash the ROM....It should be up and running after that...
rajamahbub said:
You sure you have enough battery on your phone? Go to download mode again and flash gingerbread, root the phone. Then copy the slim bean into your internal SD card. Now go into CWM and do three wipes (Cache, Dalvik and Data). And flash the ROM....It should be up and running after that...
Click to expand...
Click to collapse
i have 100% battery. Why again flash gingerbread ( i have it)
I tryed this but then after reboot the phone doesn't read my SIM card? any solution for this?
max_x said:
i have 100% battery. Why again flash gingerbread ( i have it)
I tryed this but then after reboot the phone doesn't read my SIM card? any solution for this?
Click to expand...
Click to collapse
If it doesn't boot flashing GB again sorts the problem out, thats GB again! It means your IMEI has lost. You need to go back to stock rom to retrieve your IMEI. Download any gingerbread stock rom from net.
Sent from my GT-I9000 using xda app-developers app
Sorry if I interrupt, but i have a quite similar problem. My SGS DOES boot though, and works okay... BUT it isn´t recognized proberly by my pc(although having all drivers installed) tried reinstalling both drivers and whole OS. Also tried other computers and cables. Phone boot fine in download and recovery mode but isn´t recognized by Odin, heimdall, oneclick etc.? My question is as following: Is it in anyway possible to grab a OTA/STOCK .zip to flash in Recovery 3e??
Thanks
rajamahbub said:
If it doesn't boot flashing GB again sorts the problem out, thats GB again! It means your IMEI has lost. You need to go back to stock rom to retrieve your IMEI. Download any gingerbread stock rom from net.
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
first I do this http://www.theandroidsoul.com/downl...mware-update-galaxy-s-i9000-to-android-2-3-5/
then this http://www.theandroidsoul.com/galaxy-s-gets-official-value-pack-firmware-xxjw4-includes-touchwiz-4/
then i rooted it and install cwm like this http://www.theandroidsoul.com/xxjw4-root-and-clockworkmod-recovery-for-galaxy-s/
and then I copy slimbean 2.2 and 2.3.0 and when I'm in recovery I cant go immediately on 2.3.0 because it says than installaion is aborted so first i flash 2.2 and then 2.3.0
and stil my sim card doesn't work
max_x said:
because it says than installaion is aborted so first i flash 2.2 and then 2.3.0
and stil my sim card doesn't work
Click to expand...
Click to collapse
go here http://forum.xda-developers.com/showthread.php?t=1102881 select the latest gingerbread 2..3.6 Rom for your region than go here http://forum.xda-developers.com/showthread.php?t=1112908 flash a semaphore kernel to get root and CWM, than backup your EFS before flashing ICS (first) in CWM and than JB using CWM as per instructions on download page
xsenman said:
go here http://forum.xda-developers.com/showthread.php?t=1102881 select the latest gingerbread 2..3.6 Rom for your region than go here http://forum.xda-developers.com/showthread.php?t=1112908 flash a semaphore kernel to get root and CWM, than backup your EFS before flashing ICS (first) in CWM and than JB using CWM as per instructions on download page
Click to expand...
Click to collapse
but when i flash semaphore kernel i don't get root
When you flash from GB to ICS or jb and even fro. Ics to jb it will reboot on install then you need to go back into recovery and run the install a second time this is due to a partition change and the kernel needing to be rebooted into one compatible with those partitions so basicly flash cm9 or 10 twice for it to boot correctly
Sent via that ninja standing right behind you
Latrop said:
When you flash from GB to ICS or jb and even fro. Ics to jb it will reboot on install then you need to go back into recovery and run the install a second time this is due to a partition change and the kernel needing to be rebooted into one compatible with those partitions so basicly flash cm9 or 10 twice for it to boot correctly
Sent via that ninja standing right behind you
Click to expand...
Click to collapse
thanks
Hello dear friends!
I have following issue with the phone>
1. Phone had froyo installed on it.
2. i tried to copy a custom rom to sd, and then, i just tried to flash it directly via stock recovery. (completly noobish, i realize now...)
3. apparently by the status from the stock recovery it succeeded. BUUUT actually not...
so>
4. i got stuck into the samsung boot logo...
so>
5. i tried to flash cwm recovery through this steps provided by this tutorial.
http://forum.xda-developers.com/showthread.php?t=1342190
6. I now got a black screen instead of any recovery. tried it also with the froyo version of the recovery (designed apparently specially for froyo devices) and also with the gingerbread one. still no joy....
now, i am really lost and have no further ideas.... please help me at least get this back to stock again (it is the phone from work and i will have a hard time explaining them that i bricked it.... )...
please advise what should i try further??
THANKS!!!!!
PS> pls take into account that i am kind of a noob regarding this device... did a lot of things on my hox, but i do not know to much about this s5570....
download a four package firmware then flash it with Odin
Can u pls give me a link to a download / tutorial?? It's my first encounter with odin, so i am pretty noobish... Pls pls
Sent from my HTC One X using xda app-developers app
http://yagyagaire.blogspot.com/
you will get every required info
dheeraj (dhlalit11) said:
http://yagyagaire.blogspot.com/
you will get every required info
Click to expand...
Click to collapse
ok, now device is in following state>
flashed GB rom on it - working
by downloading official gb rom from
here
flashed cwm recovery - works with the steps from my first post now
flashing a custom rom from a zip on the sd card does not work afterwards!!!!!!! - it soft bricks phone again and i have to redo the 2 steps above.... why???
what am i doing wrong???
you didn't wipe data and cache before and after flashing process, right
now u have cwm recovery just boot into recovery and flash another rom... but before u flash rom make sure u clear cache and data from recovery menu then flash rom.
Guilty as charged!!
Trying it now and updating afterwards!
Sent from my HTC One X using xda app-developers app
if your flashing gingerbread over froyo without wiping cache and data then that's why your getting soft brick.
I flashed jb from odin, so no cache deletion needed...
But yes, for custom rom install delete cache data all except sd before!!
So now cyanogenmod is up and running!!
Sent from my HTC One X using xda app-developers app
glad to hear you got it working
oh great its working now
suggesting you to use a hide tag in your sig
Why? to hide what?
Sent from my HTC One X using xda app-developers app
your sign is a bit big
thats nice from u
I have a probleme : i have gingerbread and i want to update to jelly bean but i can't : the message is (installation aborted). I downloaded rom manager i help with http://theunlockr.com/2012/08/29/how-to-load-a-custom-rom-on-an-android-device/ because i have a bleu recovery . I flash the cwm in rom manager and i have the recovery orange . I can't load all custom rom .What's solution ?
Try ICS first.. Then flash jb..
Sent from my GT-I9000 using xda premium
LohithN said:
Try ICS first.. Then flash jb..
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
I try this http://forum.xda-developers.com/showthread.php?t=1852546 but it's don't working
My baseband version is XXJVU
I have flash cm9 it's work ( installation complete) but and in boot i see he enter into recovery i see installation aborted
Search for the newest cwm recovery and flash it, install the JB Rom with factory reset and the hole stuff and then have a look at the wiki maybe theres a zip to go back to stock recovery (Used this way myself but i' m using the s+ so i don't now if theres such a file for the normal s. sorry for that)
Or you can search for how to recover from bootloop to recovery
Anywhere was a thread for this but don't know at the moment, will post a link tomorrow
Twll me if it helped you
markey97 said:
Search for the newest cwm recovery and flash it, install the JB Rom with factory reset and the hole stuff and then have a look at the wiki maybe theres a zip to go back to stock recovery (Used this way myself but i' m using the s+ so i don't now if theres such a file for the normal s. sorry for that)
Or you can search for how to recover from bootloop to recovery
Anywhere was a thread for this but don't know at the moment, will post a link tomorrow
Twll me if it helped you
Click to expand...
Click to collapse
No i try this but it's don't working for me i can't reflash to ics and jb . What's the solution
Hi.
first check your file download is complete
then Install 3 files Stock ROM (GB) then Root it with Semaphore and install Your Rom from Recovery
I use with this site http://pinappu.hubpages.com/hub/Sam...e-update-to-Android-40-aka-Ice-Cream-Sandwich . Thx you all
Right, to cut a lonnnnng first post story short, basically, rooted my phone yesterday, went well, installed some rooted apps and was having fun, one app, 3D something, from Google Play. it asked me to restart my phone after setting superuser (i thought this was quite weird) anyway i boot locked my phone - got the typical "Samsung GALAXY Note GT-N7000" and the phone woundnt move from there, i can gt into vol+ home and power and vol- home and power still. so after some research i found i had to flash therelivant stock ROM using odin - so i did. and it worked. then at somepoint today my phone got stuck in a boot loop consisting of the GT-N7000 screen then the samsung spash screen. when i do vol+ home power, i get in red text "E:/error%20in%20/data/recovery_last_kernal_log.txt" - what does this mean? and how(if at all) do i fix it?
i have curently re-flashed stock ROM and vol+ home power & "wipedata/factory reset" and so far so good......
any help or shed light would be a great help
Phone is Samsung GALAXY Note GT-N7000
Flashing the stock rom won't change anything if you have not wiped data. It just restores the system. What rom are you on? JB or ICS? To get everything to factory standards, install philz kernel.
Then boot into Cwm and choose wipe data,-clean before new rom flash.
Once it's done, choose reboot download and flash the rom again with odin. This way anything that the "3d something" might have done will go.
Sent from my GT-I9500 using xda premium
nokiamodeln91 said:
Flashing the stock rom won't change anything if you have not wiped data. It just restores the system. What rom are you on? JB or ICS? To get everything to factory standards, install philz kernel.
Then boot into Cwm and choose wipe data,-clean before new rom flash.
Once it's done, choose reboot download and flash the rom again with odin. This way anything that the "3d something" might have done will go.
Sent from my GT-I9500 using xda premium
Click to expand...
Click to collapse
it was called "Chainfire3d" and could you write the bove in steps?
i currently have flashed stock JB rom... and its working for now, but i dont want to turn it off incase it loops again. so what should i do from here, its currently un-rooted...
thanks a million for your reply
1. Install philz kernel from recovery.
2. Boot into Cwm recovery and choose clean before new rom install.
3. Choose reboot download.
4. Connect to pc and flash rom using odin.
Sent from my GT-I9500 using xda premium
nokiamodeln91 said:
1. Install philz kernel from recovery.
2. Boot into Cwm recovery and choose clean before new rom install.
3. Choose reboot download.
4. Connect to pc and flash rom using odin.
Sent from my GT-I9500 using xda premium
Click to expand...
Click to collapse
so put philz kernel on the ext sdcard
vol+ home power - and install
boot into cwm and choose clean before new rom install
reboot into download
and then flash stock rom?
one last question... will the lastest philz kernel work?
thanks again
i currently have PhilZ-cwm6-XXLT4-OXA-4.93.6-signed on my external sd.... will this do?
yeah any kernel will do as you just need recovery... once the kernel is installed, boot into recovery.. You should see CWM based recovery.
nokiamodeln91 said:
yeah any kernel will do as you just need recovery... once the kernel is installed, boot into recovery.. You should see CWM based recovery.
Click to expand...
Click to collapse
and then clean before new rom install?
xDEADFAMOUSx said:
and then clean before new rom install?
Click to expand...
Click to collapse
yes if you got the philz recovery installed.
Here is what I did with the phone:
- Flashed JVU via odin
- Flashed CF-Root with CWM via odin
- Wipe EVERYTHING
- Flashed semaphore kernel for 4.3 via CWM
- Rebooted to CWM
- Flashed CM 10.2 stable via CWM
- Flashed semaphore again
- Flashed gapps
And now the phone keeps rebooting to CWM everytime I power it on. It never goes to Android, it always boots to CWM. Any ideas?
Of course, i tried to flash CM / semaphore / gapps again but it keeps doing the same. Flashing only CM does not work either
same problem with my i9000 back year..U have lost you internal memory..it can work if u take you phone into download mode for 5 minutes and then start it it will work..
Sent from my GT-I9300 using xda app-developers app
[email protected] said:
same problem with my i9000 back year..U have lost you internal memory..it can work if u take you phone into download mode for 5 minutes and then start it it will work..
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
What do you mean exactly? ;_;
By the way it seems to work after flashing a samsung stock ROM but it does the same everytime I try to install CM. And I have done it before, I don't understand this ;_; (I decided to start over again because I was having trouble to downgrade from 4.4)
Have you find a solution? I faced the same problem and after reading half of the day on this forum I managed to find a solution to go back to stock and restore the phone functionality. Now I only have to flash CWM/TWRP and start to flash custom ROMs again
Let me know if you still need help.
The correct procedure to come to any ROM is from GB>ICS>JB>KK. So make sure that you are following the correct procedure
Sent from my GT-I9000 using Tapatalk 2
roccatgaming said:
Have you find a solution? I faced the same problem and after reading half of the day on this forum I managed to find a solution to go back to stock and restore the phone functionality. Now I only have to flash CWM/TWRP and start to flash custom ROMs again
Let me know if you still need help.
Click to expand...
Click to collapse
Hi,
I have the same problem, device keeps rebooting.
I did a rooting through Odin 3 and I got the green box saying PASS and now the device keeps rebooting. how can i fix it. Looks like you did the fix on your device.
Can you please tell me step by step how to fix my device.
Your help would be appreciated
Thanks
FLDS