Here is what I did with the phone:
- Flashed JVU via odin
- Flashed CF-Root with CWM via odin
- Wipe EVERYTHING
- Flashed semaphore kernel for 4.3 via CWM
- Rebooted to CWM
- Flashed CM 10.2 stable via CWM
- Flashed semaphore again
- Flashed gapps
And now the phone keeps rebooting to CWM everytime I power it on. It never goes to Android, it always boots to CWM. Any ideas?
Of course, i tried to flash CM / semaphore / gapps again but it keeps doing the same. Flashing only CM does not work either
same problem with my i9000 back year..U have lost you internal memory..it can work if u take you phone into download mode for 5 minutes and then start it it will work..
Sent from my GT-I9300 using xda app-developers app
[email protected] said:
same problem with my i9000 back year..U have lost you internal memory..it can work if u take you phone into download mode for 5 minutes and then start it it will work..
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
What do you mean exactly? ;_;
By the way it seems to work after flashing a samsung stock ROM but it does the same everytime I try to install CM. And I have done it before, I don't understand this ;_; (I decided to start over again because I was having trouble to downgrade from 4.4)
Have you find a solution? I faced the same problem and after reading half of the day on this forum I managed to find a solution to go back to stock and restore the phone functionality. Now I only have to flash CWM/TWRP and start to flash custom ROMs again
Let me know if you still need help.
The correct procedure to come to any ROM is from GB>ICS>JB>KK. So make sure that you are following the correct procedure
Sent from my GT-I9000 using Tapatalk 2
roccatgaming said:
Have you find a solution? I faced the same problem and after reading half of the day on this forum I managed to find a solution to go back to stock and restore the phone functionality. Now I only have to flash CWM/TWRP and start to flash custom ROMs again
Let me know if you still need help.
Click to expand...
Click to collapse
Hi,
I have the same problem, device keeps rebooting.
I did a rooting through Odin 3 and I got the green box saying PASS and now the device keeps rebooting. how can i fix it. Looks like you did the fix on your device.
Can you please tell me step by step how to fix my device.
Your help would be appreciated
Thanks
FLDS
Related
today i've got my S1 i9000 , and i am not new in this all development on android, i already flashing roms for S3 and S2 .
so tried to flash ROMS from the forum , and the problem is when i get to CWM , trying to flash the zip folder in the middle of the Installation like
20% completed the device shuts down shows the logo of the new rom and start bootlooping.
i have proper root and a basic CWM , i did wipe data and cache. the rom i was trying is VorteX 0.1 JB.
It's installing a new partition layout. Just reboot into recovery and install the same ROM again, it well finish installation this time.
Sent from my GT-I9000 using xda premium
NIMBAH said:
It's installing a new partition layout. Just reboot into recovery and install the same ROM again, it well finish installation this time.
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
i cant , after installing, the device start bootlooping and i cant access CWM , i need to restore new firmware 2.3.6 via odin
Hey Guys,
So I updated Rom Manager to latest version and now in 'Manage/Restore backups' my backup was missing so I thought no probs I'll just restore previous version with Tit backup - but I still cannot see backup ?
I tried fixing permissions and also moving file out then back into CWM backup folder but this didn't work either -
so any idea's ?
Quote:
Originally Posted by NIMBAH
It's installing a new partition layout. Just reboot into recovery and install the same ROM again, it well finish installation this time.
Sent from my GT-I9000 using xda premium
i cant , after installing, the device start bootlooping and i cant access CWM , i need to restore new firmware 2.3.6 via odin
Click to expand...
Click to collapse
There are several threads on how to flash to JB, and coming from JB you have to flash to ICS first. Here is a good flash guide on JB->ICS: http://forum.xda-developers.com/showthread.php?t=1494493 When you flash in CWM to ICS you'll get a "quick" installation (about 20/30% as you say) and then the device reboots to a "bootloop". This happens because change in kernel. You can just pull the battery after the kernel has been flashed and insert battery while holding down 3-button combo to force into CWM. Now run the .zip again and it should flash properly in the new CWM and kernel.
Check here for more common problems and fixes: http://forum.xda-developers.com/showthread.php?p=30415128#post30415128
good luck!
Today I tried to update my phone to a new custom rom.
I followed the instructions of the threads and tried to get it to work.
Of course it didn't work or else I wouldn't be here right now asking for help.
Here's the current situation.
I am able to boot into download mode + recovery mode and also boot into cwmr and install a different kernel.
I used pc odin to install it each time and it does pass and the rom (i've tried installing a gingerbread rom so that I can try everything again) does install.
the problem is that it is currently stuck in a boot loop at the "Samsung galaxy note gt-N7000" screen.
I have looked up dr.ketan's posts and tried some too.
currently i am booting abyss note kernel 42cwt touch original. (I know for sure it is a workable kernel because I've been using it this whole time.
here's what i've done. please tell me what i've done wrong and the possible ways to reverse it.
1. backed up everything
2. went into recovery
3. factory reset/cache clear
4. use pc odin to install new kernel (since I was looking into switching to another kernel anyways)
5. use pc odin again to install gingerbread rom (I do get the green light saying it did get installed
6. phone auto reboots
7. it gets stuck at the boot loop like i have mentioned above
i will try to attach a few pictures of my note as soon as I can so you can see what's going on with it.
What rom is there on the phone now ? if you boot into recovery .. what recovery do you get now ? CWM or stock ardroid 3e recovery ?
nokiamodeln91 said:
What rom is there on the phone now ? if you boot into recovery .. what recovery do you get now ? CWM or stock ardroid 3e recovery ?
Click to expand...
Click to collapse
Right now it reboots to 3e recovery.
The rom that I tried to inject to it is currently a the stock gingerbread rom from dr. Ketans thread.
The rom that I had on it is the official ics rom for the hk region.
The rom that I wanted to inject to it was a custom jb rom that uses hydracore as a kernel.
Thanks!!
try installing a prerooted Gb rom or an ICS stock rom using PC odin.. if you choose ICS, after flash install a safe kernel..
nokiamodeln91 said:
try installing a prerooted Gb rom or an ICS stock rom using PC odin.. if you choose ICS, after flash install a safe kernel..
Click to expand...
Click to collapse
If I do a stock ics update can I just do it through kies or do I have to do it through pc odin? Also. Would abyss or hydracore considered as a safe kernel???
yes if kies can do it then good but at this situation i dont think. its better to use PC odin for now. yes both are safe kernels
nokiamodeln91 said:
yes if kies can do it then good but at this situation i dont think. its better to use PC odin for now. yes both are safe kernels
Click to expand...
Click to collapse
I've tried your suggestions...and it didn't seem to work out too well.
I am able to flash to different kernels and get in and out of different recovers and such, but ya...still no luck with running a rom.
Well I am not sure but I soft bricked my phone when I tried that Abyss Kernel. In my view Hydracore is safe. Philz is super safe.
Flash ICS which matches your region using Odin. If phone boots flash Philz, If not, then be ready to read a lot of stuff or get phone repaired.
asian_boi said:
I've tried your suggestions...and it didn't seem to work out too well.
I am able to flash to different kernels and get in and out of different recovers and such, but ya...still no luck with running a rom.
Click to expand...
Click to collapse
instead of flashing kernels. flash a complete rom using PC odin.
nokiamodeln91 said:
instead of flashing kernels. flash a complete rom using PC odin.
Click to expand...
Click to collapse
You have so much patience
Sent from my Amazon Kindle Fire using Tapatalk 2
the only thing i have...
Hey guys. my note seems to have cooperated and allowed me to flash a new rom and also a new kernel. Here's the catch though, now it's stuck in the samsung logo and won't boot beyond that. Any suggestions of what to do? I am continually searching on the forums to find a solution.
At least I'm happy to know it's not a brick that can't be fixed.
Thanks nokiamodeIn91 for your help so far. I really appreciate it.
which rom did you flash and which kernel? how?
He spent a lot of time helping you. Be sure to hit thanks button
Sent from my GT-N7000 using Tapatalk 2
I currently flashed the abyss note kernel 42 cw touch and I downloaded an old gb rom from sammobile .
Here's what I did.
1. Put my phone into download mode
2. Run as admin on PC Odin
3. Selected the Abyss kernel then flashed it.
4. Boot into the cmw, wiped cache then booted the phone into download mode again.
5. Then I installed the old GB Rom on to my phone and restarted it.
6. Phone starts, loads past the GT-N7000 logo and goes into the samsung boot logo.
7. Phone repeats the animation of the samsung logo a time or two then restarts on its own. This loops until the phone is completely drained. I know that the rom works because that was the rom that I used to root my phone. I definitely don't mind downloading another rom if I have to.
my current goal, if we can fix this, is to quickly just update to the official jb rom for n7000 and not play around with the rooting and such until I have even more time to learn more.
at least I know for sure my phone isn't hardbricked, I would imagine I have either missed a step or something that caused the problem.
I have read through the forum and I did come across one post talking about checking my phone's partition and such.
I got to be honest, I'm really not technically skilled enough at this point in time to dare to mess around with that type of thing yet especially with so much coding to make sense of it. (I know this is kind of dumb to say especially when I rooted my phone and screwed up this bad). More importantly, I don't even know for sure if I need to do a partition or not.
Please let me know what I did wrong and how I can fix it.
I got a question though (out of curiosity), how come there's no toolkit for the n7000 like the S3 and also the note 2???
this is the name of the old gb rom that I tried flashing.
N7000ZSKJ6_N7000OZSKJ6_N7000XXKJ6_HOME.tar
I actually have tried several other roms as well (from GB-JB, official and custom) and all of them so far has gotten to the samsung boot logo
I have read on the forums to try using Philz-cwm 6 kernel but I don't know if it'd solve my problem.
let me show you one of the threads I have read, if I dived into the wrong material let me know and I won't consider using it (or learn how to use it) for my current situation
http://forum.xda-developers.com/showthread.php?t=1661590&highlight=samsung+logo+bootloop&page=2
like I was saying before, I really have no experience in coding so all the things that really made near no sense to me. I understand the basic concept of what its trying to do it's just seems like a very unsafe method for me to try especially when I lack the necessary knowledge in this area of expertise.
did you flash the GB rom using the standard PIT file ?
also you could try with the 5 file flashing method from this thread
http://forum.xda-developers.com/showthread.php?t=1530501
Hello..
Why are you only wiping cache.
You should have done a factory reset on that step.
Sent from my GT-N7000000000 using Tapastalker 2
asf58967 said:
Hello..
Why are you only wiping cache.
You should have done a factory reset on that step.
Sent from my GT-N7000000000 using Tapastalker 2
Click to expand...
Click to collapse
Yeah true... should also format system..
**** if you can boot into recovery , do a facotry wipe now
Hi all
N7000 @ 4.1.2 with PhilZ.Speedmod
Odd behaviour began a few days ago: Single tap power button would cause the Reboot/Airplane mode menu followed by a crash a few seconds later. This became more and more likely to happen so I wiped user data and performed a full factory reset/cache wipe etc.
Went through the android start up as per usual and only installed non-root apps just to be on the safe side (except Titanium Backup - which i use to freeze Touchwiz).
About 4 hours after, same problem only this time it wont get past Samsung Galaxy Note GT-N7000 Splash screen image at all.
A new battery was inserted a few days ago - could this have damaged the board maybe?
Recovery STILL works but I don't have any backup images.
Odin recognizes the phone in download mode
Should I try a different kernel/rom?
Really lost without my note.
Any help gratefully receieved!
Regards
Warnoceros
I am having the same issue. Was on Carbon Rom and everything was working fine, then after a restart the phone cannot pass the boot animation. It just shuts off right in the middle of booting. Have tried to reflash back to GB and still the same issue.
Flash a new fresh 4.1.2 rom thorugh pc odin after doing all necessary wipes
Sent from my GT-N7000 using Tapatalk 2
try use another battery...
RickR78 said:
I am having the same issue. Was on Carbon Rom and everything was working fine, then after a restart the phone cannot pass the boot animation. It just shuts off right in the middle of booting. Have tried to reflash back to GB and still the same issue.
Click to expand...
Click to collapse
That was weird never happened before with me as i have been using carbon rom almost 3months now.. And when you falshed back to a gb rom have performed a factory reset in recovery? If not then do it first
Sent from my GT-N7000 using Tapatalk 2
zai89 said:
try use another battery...
Click to expand...
Click to collapse
Thanks - tried a different Battery - same problem
abhinav quietly brilliant said:
Flash a new fresh 4.1.2 rom thorugh pc odin after doing all necessary wipes
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Thanks Abinav
Will try in the morning. Do I need a new Kernel first?
Warnoceros
No let it be the stock after first flash
Sent from my GT-N7000 using Tapatalk 2
abhinav quietly brilliant said:
No let it be the stock after first flash
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Okay, so reflashed and the phone booted fine but i'm still getting this intermittent 'power button causing crash' fault. Tried a couple of different Roms and am still getting the same problem.
Could it be a hardware problem?
Thanks
Warnoceros
Yeah it seems to be a hardware issue.. Wait for someone else more experienced then me to see this thread maybe he/she can suugest you a way to get out of this problem.. If you have warranty then do claim it before it's too late
Sent from my GT-N7000 using Tapatalk 2
the battery might be failing and have caused something that messed up the filesystem; try installing another battery and reflash any rom with wipes etc and see if it boots up
What kernel do you use exactly?..philz or speedmod?...
If you on philz or speedmod kernel I suggest you make a clean install,
Reboot recovery full wipe..
Reboot to download mode,
Flash stock GB or JB..
If you flash JB, download philz kernel.zip and flash through stock recovery...
Sent from my GT-N7000 using Tapatalk HD
Stuck on Splash Screen. No recovery. Odin not able to flash roms.
zai89 said:
What kernel do you use exactly?..philz or speedmod?...
If you on philz or speedmod kernel I suggest you make a clean install,
Reboot recovery full wipe..
Reboot to download mode,
Flash stock GB or JB..
If you flash JB, download philz kernel.zip and flash through stock recovery...
Sent from my GT-N7000 using Tapatalk HD
Click to expand...
Click to collapse
Hi
My stock JB official unrooted rom suddenly went to a bootloop. I looked up online for solutions and flashed an official JB ROM for my phone and Odin failed to flash it. I tried Philz recovery but Odin failed to flash it. I got a yellow triangle which I was able to removie through Odin. Currently my phone is stuck on the splash screen. Recovery doesn't work. Odin fails when I try to reflash with a md5.tar file. Please experts help me with my problem. would really appreciate it.
Thanks in advance.
fahad.anwar.xda said:
Hi
My stock JB official unrooted rom suddenly went to a bootloop. I looked up online for solutions and flashed an official JB ROM for my phone and Odin failed to flash it. I tried Philz recovery but Odin failed to flash it. I got a yellow triangle which I was able to removie through Odin. Currently my phone is stuck on the splash screen. Recovery doesn't work. Odin fails when I try to reflash with a md5.tar file. Please experts help me with my problem. would really appreciate it.
Thanks in advance.
Click to expand...
Click to collapse
you usually get stuck in a boot loop when you forget to wipe dalvik cache and factory reset the phone before installing a custom rom
Be patient...
makyubex said:
you usually get stuck in a boot loop when you forget to wipe dalvik cache and factory reset the phone before installing a custom rom
Click to expand...
Click to collapse
Just Got philz kernal for your device ..(i know you have done it but just do it again)...
go to samfirmware and download your firmware...and flash through odin...
Dr.Ketan thread is always available for u...
---------- Post added at 05:25 AM ---------- Previous post was at 05:19 AM ----------
makyubex said:
you usually get stuck in a boot loop when you forget to wipe dalvik cache and factory reset the phone before installing a custom rom
Click to expand...
Click to collapse
If you want the indian ROM and recovery and unable to install from the Hotfile just download these links serial wise...
1. https://drive.google.com/file/d/0B9lXWJxj84B6Z2pkQ3RhV0lIbEU/edit?usp=sharing
2. https://drive.google.com/file/d/0B9lXWJxj84B6dGVpWDZXemNZckU/edit?usp=sharing
3. https://drive.google.com/file/d/0B9lXWJxj84B6dzRZYWU3aVV0MDg/edit?usp=sharing
Try the following please, you must have Android SDK installed beforehand:
http://forum.xda-developers.com/showthread.php?t=2165870
Instead of using the "-n" argument, I used "-y" and "-f" to force checking the partitions and to automatically answer yes to all questions.
Hi
I'm having a few problems with my trusty Galaxy S.
I tried to update to Cyanogen 10, got it installed through Clockwork mod no probs. I had a few problems with it , thought I'd try 9 as my friend gets on great with that.
It hasn't successfully flashed though. It's stuck in a loop where it enters Clockwork, then crashes back to the loading screen. I haven't done much of this for ages so guess I got careless and made an error somewhere.
I assume I need to flash through Odin now as I can still get to download mode, but not recovery. I don't know which kernel to get and use though? no idea what will work and don't want to brick my phone. I'd just like a working kernel that so I can put Cyanogen on again. Any advice is appreciated thanks.
pjimbo said:
Hi
I'm having a few problems with my trusty Galaxy S.
I tried to update to Cyanogen 10, got it installed through Clockwork mod no probs. I had a few problems with it , thought I'd try 9 as my friend gets on great with that.
It hasn't successfully flashed though. It's stuck in a loop where it enters Clockwork, then crashes back to the loading screen. I haven't done much of this for ages so guess I got careless and made an error somewhere.
I assume I need to flash through Odin now as I can still get to download mode, but not recovery. I don't know which kernel to get and use though? no idea what will work and don't want to brick my phone. I'd just like a working kernel that so I can put Cyanogen on again. Any advice is appreciated thanks.
Click to expand...
Click to collapse
Flash .tar semaphore kernel via odin then flash cm10.1 3 time from recovery
http://forum.xda-developers.com/showthread.php?t=1786220
Sent from my GT-I9000 using xda app-developers app
5aaled said:
Flash .tar semaphore kernel via odin then flash cm10.1 3 time from recovery
http://forum.xda-developers.com/showthread.php?t=1786220
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
Thanks that worked just fine. Nearly bricked the phone using someone's restore to stock guide. But now this kernel has installed fine.
Unfortunately I am trying to flash cm10, it installs fine, but it just loads back up into recovery mode, and wont boot properly.
Does anyone have any ideas on how I can get out of this CWM recovery boot-loop I'm stuck in?
The Semaphore Kernel is just stuck for me.
pjimbo said:
Does anyone have any ideas on how I can get out of this CWM recovery boot-loop I'm stuck in?
The Semaphore Kernel is just stuck for me.
Click to expand...
Click to collapse
All sorted now, flashed it back to stock with a recovery pack from a post on here
Hey! I got big problem, I can't open the recovery mode after updating my CyanogenMod to the latest RC4 version. After that i flashed Semaphore 2.9.25 kernel, and today I can't open recovery anymore After using Vol Up+Home+Power i see semaphore boot animation freezes for like 20 sec, then CM starts.
So what should I do to get into recovery mode again? I don't know if installing nightly updates will work (recovery doesn't work so how it will be updated), maybe using SGS Kernel Flasher will help?
Please help me solve my problem
Flash a rom with Odin
Go back to stock, try upgrade to CM10.1 again.
Alternatively if you want to learn how to use it you could try using ADB to force recovery. There are guides somewhere in these forums. But going back to stock would probably be easier...
Sent from my GT-P7510 using Tapatalk HD
Today I accidentally dropped my phone, and after back to home... I tried to open recovery CMW again - and it surprisingly worked so I was able to update my kernel :laugh:
But thank you for future solutions, I'd further try to flash only kernel via Odin
AreXe said:
Today I accidentally dropped my phone, and after back to home... I tried to open recovery CMW again - and it surprisingly worked so I was able to update my kernel :laugh:
But thank you for future solutions, I'd further try to flash only kernel via Odin
Click to expand...
Click to collapse
'one drop for solution' huhuhu
so......anyone! who hav same problem!
PREPARE TO DROP UR FONE !
not too hard i guess
Sent from my GT-I9000 using xda app-developers app