Database Develop

[Q] What are the risks of flashing MY captivate?

I made another thread asking about a problem I was having with Odin not recognizing my captivate, but with no solution there I have decided to try and install froyo a different way. It looks like the froyo guide that nbs11 wrote will work for me a lot easier than odin. I am just about to attempt it, but I have a major concern:
With odin not being able to recognize my phone at all when it is in download mode, what would happen if my phone were to become bricked? Is odin the only way to fix it then? I would not want to brick it and then have a program that will never recognize it...
,thanks

I would recommend not flashing froyo until you work out the odin problem. You will be fine the first time you flash most likely but will essentially be stuck with that one rom. Most roms will throw crazy errors and fcs if you don't go back to stock before flashing.
Also if you happen to brick your phone you will be stuck without odin. It might be tempting to flash a rom but there will be no way to go back to stock.
Sent from my SAMSUNG-SGH-I897 using XDA App

I was afraid of this... Do you know of any other way to flash back to stock without odin? I spent 6 hours trying to get it to work yesterday with no luck...

Oh wait! I would be using clockwork and RomManager in order to flash the phone to Froyo.... Does that mean when I am on Froyo I could use the same procedure to flash back to an older firmware all without the use of Odin?

That's^ exactly what I did, I used Rom Manager (clockwork, they're one and the same) to flash the recovery, backed up the stock Eclair and flashed Axura Froyo.
I also used Titanium to back up all my apps and restore them after switching to Axura. No Odin at all.
Had this phone short of a month. I'm trying to figure out how to flash Odin now.

gunmetaldroid said:
That's^ exactly what I did, I used Rom Manager (clockwork, they're one and the same) to flash the recovery, backed up the stock Eclair and flashed Axura Froyo.
I also used Titanium to back up all my apps and restore them after switching to Axura. No Odin at all.
Had this phone short of a month. I'm trying to figure out how to flash Odin now.
Click to expand...
Click to collapse
So you can confirm that it would be completely possible to flash back to Eclair with just clockwork? If so, it might be worth doing. Well, as long as I don't get bricked... That, im sure, would require odin

totally not worth the risk. figure out ODIN first, or we will be seeing a post in a few weeks from you screaming about bricking your phone.....

Pirateghost said:
totally not worth the risk. figure out ODIN first, or we will be seeing a post in a few weeks from you screaming about bricking your phone.....
Click to expand...
Click to collapse
Thats the thing though... I see no way to get odin to work with my phone. I have tried every thing that I know of.
*sigh* guess Ill have to wait for the official froyo update then...

I prettu much figured out how to recover using Odin, but before my question is now that I've rooted and applied a custom firmware, will using Odin now wipe all of my user data, root and rom?
Thanks.

I think i get it now, Odin IS a way to recover the stock firmware, it's not like clockwork where you backup your original and custom firmware and switch between them.
The fact that I was able to flash a custom firmware without bricking my phone sort of negates the need for me to use Odin.
I took that risk and it worked fine. Now for the OP, it's better to find out that you do have that option of reverting back to stock in case you brick in the middle of flashing. Therein comes the problem that Odin doesn't recognize your phone, hence the hesitation to flash.
I guess it's really up to you if you want to do it anyway without Odin...

I see no reason to risk it... I spent too much money on this thing to brick it without a way to fix it
Sent from my SAMSUNG-SGH-I897 using XDA App

yentlequible said:
I see no reason to risk it... I spent too much money on this thing to brick it without a way to fix it
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
Don't you have warranty on it? well everything that goes flashing is always a risk if your going back to stock im prefer using the "odin stock with 3 button combo", it flashes the sbl.bin first which is the 3 button combo in cases it hangs up somewhere you can always unplug the usb then go to download mode again. In cases there is also a "homemade test jig" that can help you go to download mode. The benifits you get from flashing is a lot you can use your phone full potential. Correct me if im wrong as long as you can start your phone with a display you can always fix it. I would suggest to read all those with quote and theres also "ADB" which can help in some cases. just keep in mind before flashing make sure that the 3 button combo is intact first.

Nope, I have no warranty on this... I have t-mobile but didn't want the vibrant because I would need to pay the extra money for a data plan on it. With the captivate, I bypassed the requirement for the plan when I unlocked it.
Sent from my SAMSUNG-SGH-I897 using XDA App

Ok time to re appear in this thread again. I have had a decent amount of flashing experience and want to make sure the right info us being shared.
Once again you can flash to any rom you want a couple of times.however after a few you are not found to be able to do it because what is going on in the phone of more complicated then you see on the phone. Most roms change the kernels and hardware software interaction. This can cause conflict resulting in fcs and excessive battery drain.
With all that being said I would still advise you to jump the bucket as king a you get odin to work. As long as you can figure that out you are golden. Once you have the hand of it you can flash to stock and to a rom in your sleep. I have managed to do it while on the highway.
Sent from my SAMSUNG-SGH-I897 using XDA App

A) You didn't install the driver (or the wrong driver)
B) You don't know what Download Mode is
C) Your phone is broken
D) You need to use a different USB port
Those are the ones that come to mind.
Alternatively, you could give Heimdall a try.

MikeyMike01 said:
A) You didn't install the driver (or the wrong driver)
B) You don't know what Download Mode is
C) Your phone is broken
D) You need to use a different USB port
Those are the ones that come to mind.
Alternatively, you could give Heimdall a try.
Click to expand...
Click to collapse
A) The drivers should be right, I downloaded them twice
B) I know exactly how to get to download mode.
C) Most likely
D) I Tried on 3 separate computers with different USB
Let me know if you have any other suggestions, I have tried everything.
What is Heimdall? Might be worth a shot...

Only idea i have is to pull your battery sim and sd card for a minut or two then flash odin with only your battery in.
Sent from my SAMSUNG-SGH-I897 using XDA App

I bricked my phone with an i9000 firmware. Since I was unlucky enough to have a phone without the 3 button combo, I was screwed.
Now, IF I decide to flash my new phone again, i'll make sure to put together the homemade jig which can put the phone into download mode without the phone needing to be able to do it itself.

crystalhand said:
Only idea i have is to pull your battery sim and sd card for a minut or two then flash odin with only your battery in.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
That is what I have been doing actually... I take everything out and enter download mode with just the battery in the phone
Sent from my SAMSUNG-SGH-I897 using XDA App

Moved to Q&A.

New to Rom Flashing - URGENT Help needed!

Hi all,
Sorry if i sound stupid, but I am new to all of this. I am trying to flash a gingerbread ROM onto my Rogers branded captivate. Currently I am running Rogers stock Froyo.
I have rooted and unlocked my phone using one click root, and the SGS unlock tool from the android market. I have also applied Ryans OCLF. I have busybox installed and the lasted version of Rom Manager.
However, every time i go to backup my stock rom using rom manager, nothing happens. I try to first flash the Clockwork Mod recovery, select the Captivate file and let the phone reboot, black screen with a yellow exclamation point in a white triangle with a Droid device laying under it. It will sit there forever until I manually restart the phone, at which point it acts fine.
I have backed up using titanium backup but cannot do it thru ROM manager. I have read countless forums, but it havent found a solution that works.
So i decided to proceed without a backup. I tryed to put the phone in download mode using the buttons so that I can flash it using ODIN but it doesnt go into download mode using any of the buttom press methods. I have tried to reinstall the packages from the boot menu, but i then get an error saying "e: failed to verify whole signature...."
I have also put a copy of the recently leaked gingerbread rom on my SD card and tried to install the ROM using rom managers install ROM from SD card, but i get the same black screen with yellow exclamation point and nothing happens until i maually start the phone.
I have no clue what I am missing? How to fix this? I have read and watched so many tutorials, followed all the steps. THey seem so easy on paper, but nothing that is supposed to happen, happens for me. Anyone have any suggestions on what I am doing wrong?
Please help!!

You need to follow installation instructions in the thread for whatever GB rom you are installing TO THE LETTER.
Which one are you trying?

You need to search for fixing the 3e recovery. 3e won't let you install custom roms. Also rom manager is just a gui interface for clockwork mod so in. wouldn't use it
Sent from my GT-I9000 using XDA App

cappysw10 said:
You need to follow installation instructions in the thread for whatever GB rom you are installing TO THE LETTER.
Which one are you trying?
Click to expand...
Click to collapse
I was trying to install the Official Gingerbread 2.3.3 for Captivate that was just leaked for the ATT captivate. I beleive the build number is I897UCKF1.
I do remember seeing the 3e recovery in the boot menu. Thanks alot, I will try to find a recovery fix and try that, then post the update.
Thanks alot for the suggestions so far. Its greatly appreciated!

Please for the love of all that is good in the world, do some research before you brick yourself for good. All of your issues would have not happened had you read more first before jumping in. I have seen far to many of these types if threads lately. Yes it takes a few hours to go through the threads but you save yourself the time you would spend (sometimes days) fixing your mistake.

zelendel said:
Please for the love of all that is good in the world, do some research before you brick yourself for good. All of your issues would have not happened had you read more first before jumping in. I have seen far to many of these types if threads lately. Yes it takes a few hours to go through the threads but you save yourself the time you would spend (sometimes days) fixing your mistake.
Click to expand...
Click to collapse
Your absolutely right, I did ALOT of reading, been doing so alot over a few weeks. Unfortunately, (or perhaps, I did not do enough digging) none of the tutorials, even the ones for beginners that i found on this forum mentioned anything about finding a fix for the 3e recovery. No one mentioned that the 3e Recovery bundled with the Rogers version of Froyo did not allow the install of custom roms, it also did not allow backups. Thanks to Crystalhand for letting me know this.
Anyway i found this link which helped:
http://forum.xda-developers.com/showthread.php?t=909213
I am FINALLY able to make a full backup image of my stock ROM and apps using CWM. This puts me more at ease now knowing i can also revert to stock if i install a rom that is not working properly for me.
The backup is completing as I type this. I will update again once I am able to install the gingerbread Rom I wanted to install.
Thanks again to all of you for the help!

that backup is not to restore the stock rom directly from whatever you flash. that is an imaage of your set up on stock rom. so you have to use odin to flash back to that stock rom you are on then restore that backup and it will be like you never flashed anything at all. if you just restore that backup onto the custom rom you flash it will not work properly.
the app backup your making with titanium backup will restore your apps on whatever you flash, but the rom backup doesnt work like that.

I would suggest using designgears odin 1 click, becuase no offence but you seen new and that would be least likely way for you to hard brick going to gb... Good luck
Sent from my SAMSUNG-SGH-I897 using XDA Premium App

Flashing is usually easy and safe (for the most part). But if something happends and it gets bricked u could always make/buy jigs. Easiest way to make I've seen is
forum.xda-developers.com/showthread.php?t=841512
Or you can buy them for about $8 maybe more depending your location (making em can cost less). The only thing I haven't tested the jig with is messed up bootloaders, example flashing gb bootloaders and flash froyo secundaries, everything else the jig works (atleast my experience)
Sent from my SGH-I897 running Cog 5 Beta 2

prbassplayer said:
Flashing is usually easy and safe (for the most part). But if something happends and it gets bricked u could always make/buy jigs. Easiest way to make I've seen is
forum.xda-developers.com/showthread.php?t=841512
Or you can buy them for about $8 maybe more depending your location (making em can cost less). The only thing I haven't tested the jig with is messed up bootloaders, example flashing gb bootloaders and flash froyo secundaries, everything else the jig works (atleast my experience)
Sent from my SGH-I897 running Cog 5 Beta 2
Click to expand...
Click to collapse
With messed up bootloaders you have to jtag
Sent from my SAMSUNG-SGH-I897 using XDA Premium App

leezrd said:
With messed up bootloaders you have to jtag
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
Click to expand...
Click to collapse
Well that's good to know. I'm not paying $150 for a jtag.
Sent from my SGH-I897 running Cog 5 Beta 2

$50 not $150.

prbassplayer said:
Well that's good to know. I'm not paying $150 for a jtag.
Sent from my SGH-I897 running Cog 5 Beta 2
Click to expand...
Click to collapse
Actually $50 by connexion 2005 but still expensive got something you don't need you to do
EDIT: Nevermind studacris beat me by a couple second to it
Sent from my SAMSUNG-SGH-I897 using XDA Premium App

studacris said:
$50 not $150.
Click to expand...
Click to collapse
Oh? where?
Edit:
leezrd said:
Actually $50 by connexion 2005 but still expensive got something you don't need you to do
EDIT: Nevermind studacris beat me by a couple second to it
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
Click to expand...
Click to collapse
Dosen't he charge $50 for a fix? not the jtag itself?

Mobiletechvideos.com

Problem with teamhacksung's ICS rom!!! Need help desperately!!!

ok guys here is the deal. I just flashed teamhacksung's CM9 ALPHA for Captivate (BUILD 16) and faced multiple problems :
-no service at all
-phone doesnt recognize internal sd card, and keeps asking to insert sd card to be able to use camera and media player
-no option to choose wifi that i want to use
-cannot connect phone with computer via usb even mass storage is on
I need help desperately guys as soon as possible!!! can someone tell how to fix these problems, or tell me how to fix connection problems so i can copy another rom to my phone, or maybe how to go back to stock settings and stock rom !!

try flashing different ROM, may be?
Nostalgia 2.1 is out.

Check the sticky in the dev section for an odin flashable stock rom. Don't use cwm. Start back at kk4, flash a cwm kernel (corn or similar), then try cm9 again.
Sent from my SAMSUNG-SGH-I897 using xda premium

GFunkOfLex said:
Check the sticky in the dev section for an odin flashable stock rom. Don't use cwm. Start back at kk4, flash a cwm kernel (corn or similar), then try cwm9 again.
Sent from my SAMSUNG-SGH-I897 using xda premium
Click to expand...
Click to collapse
Do this and try again. But before you go and flash things, make sure you know the way out first.
Sent from my CM9 ICS i897 Captivate

Thank u guys, i found my way out of this...now i have icsgs rom installed and ive got encryption unsuccessful problem than broke my internal memory, and now i have to deal with that...this phone really hates me :Thanks u guys for help

There is a thread in the Dec section with instructions for a work around for the sd card failure problem.
Can't find the link atm since I'm on my phone.
Sent from my SGH-I897 using XDA App

Hey guys i got new question for u, well now while im dealing with encryption problem i used the guide that yall mentioned and im having little problem (i hope its little) so heres the deal : whenever i try to pull or push file using adb i got device not found error. Im trying to push vold.flstab file that i somehow got out system/etc folder on my phone without using oull command since it wasnt working. I got it out and modified it but i cant push it back. How can i fix this error or how can i create a zip file to flash this file to my phone using cwm ???

Nevermind guys, figured out how to change that file (using root explorer) but now when i changed i was supposed to restart phone (thats what guide said) but phone now stucks on boot screen. really dont know what to do -.-

My friend says to me all the time... "your doing it wrong" and "just stop hacking your phone and u won't have that problem"
Sent from my SGH-I897 using XDA App

Yeea, I figured out that way now when my phone is totally busted, im gonna get new one (Captivate again) and not gonna mess a lot with it as I did with this one.

Really you shouldn't have to worry about completely messing up(but don't hold me to it) I thought I was done a couple times, but even when my captivate was soft bricked and my computer wouldn't recognize it, a USB jig pops it into download mode that we all know and love ... and from there you can flash back to whatever you like.
By the way...when is the last backup you have made? If it was right before you flashed, just go into download mode, flash to whatever you were on, restore your nandroid, then start over the right way(or choose not to flash that again)
Sent from my DROID X2 using XDA App

Touch Screen not working after ICS update

Hello all,
I have a GTab 8.9 from AT&T. I performed the ICS upgrade last night using Kies and it seemed to load correctly with no errors however the touch screen does not work now. It boots up fine but I cannot do anything with the screen. Power and volume buttons seem to be working fine.
I was able to reboot the device by holding the power button in and then go into download mode and do a factory reset. That went with no errors but the touch screen still does not work.
So, next I thought I would use Odin and try to push the factory rom back to it however Odin never sees the device, (tried multiple usb ports and 2 different pc's Win7 32b and 64b) However if I go ahead and let the GTab boot on up Odin does see it at that point. I can also get to the internal sdcard via my computer.
I also tried to copy the 7300_cwmr files to the sdcard and rebooted back to download mode. I selected apply update from sdcard and went into each of the directories but the device does not see any files in the directories, just the directories themselves.
So.... at this point I'm at a loss what to try next and I'm hoping someone on this forum can give me a nudge in the right direction.
I did reinstall the usb driver
Odin sucessfully recognized this device in download mode 'before' the ICS upgdate, not after.
I am using the factory usb cable and I did try a second one.
I was running version 3.2 before the upgrade.
Not ever rooted
Kies recognizes the device as well, can kies be used to flash my device? (sorry if that's a stupid question)
Thanks ahead

Are you sure you're in download mode, not recovery, when you try Odin. If kies recognizes the device I can't believe Odin won't.
Is the stock rom file you're trying to flash a zip file or a .tar.md5? The recovery is looking for a zip file and that may be why you didn't see it in any folder. Odin uses the tar file.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app

Thanks for the reply.
Yes I am in download mode. As I mentioned, Odin was able to see my GT before I upgraded to ICS, but not after. At least not in DL mode. If I let the GT go ahead and boot up Odin recognizes it with the port showing up in it's normal amber color.
It boots up fine, the touch screen is not working though so I can't use the GT. Once it boots up I can see it in my computer and place files on on it.
Thanks

Have you tried fixing permissions when you're in recovery mode? Do you have a custom recovery installed our the stock recovery, and if custom which one?
Sent from my SGH-I727 using xda app-developers app

I apologize, I'm not sure what you mean by fixing permissions while in recovery mode. I do not see that option on the screen. Everything is factory on the GT. I have not installed a custom recovery. The only change to the device from stock was the ICS upgrade that I just performed via Kies.
Is there a way that I can recover the device back to 3.2 using either Kies or while in DL/recovery mode? When the device boots I can see it and add files via my computer. Can I place the stock rom that I have downloaded from sammobile on the devices sdcard and reboot into DL mode and do a restore from sdcard? Is there a different way to do this without Odin?
Odin... I am not sure why it is not recognizing it while in DL mode. Odin will recognize it after the device boots. Actually Odin recognizes it just after the "Samsung" logo displays... while the AT&T "Rethink Possible" startup video is playing Odin will see it at that point. Not before. Quite frustrating actually. (I have tried multiple pc's and usb ports)
Thanks again for the help and apologies if I am asking stupid questions.

With the device off, hold down the power and both volume keys. When you see the Samsung logo release the power key but continue to hold down the volume keys for 2 seconds then release them. That should get you into down load mode. It'll say something about pressing the volume up key to continue. Have Odin running and then plug on the usb cable. Have you done something like that?
Sent from my SGH-I727 using xda app-developers app

ok... so I found an old "XP" laptop here at my office and downloaded the usb driver and Odin again and wnet into DL mode and for whatever reason Odin sees it on the XP machine. (whatever) grrr
Anyway... I downloaded and tried pushing both of the roms I found on sammobile.com for AT&T ( i957UCKJ7 and i957UCLK4) to my GT8.9, both times they completed successfully and when rebooting the touch screen would not work.
Is the rom still available for 3.2? Can I revert back to what came with it when it was originally released?
Thanks again for the assistance.

It sounds like you have a bigger problem than putting the stock Rom on it is going to fix. If you're still under warranty I'd take it in.
Sent from my SGH-I727 using xda app-developers app

Yeah I called them up and can toss it back at them, which I will do if I cant find an original factory rom to try and push to it.
I'm still searching for one though I have not been able to find one yet. Can anyone point me to a factory rom for this device?
I'd like to try and flash it back to stock before I send it back to them (if possible) as the touch screen was working just fine before I pushed out the update via kies the other day. Once the update finished and it rebooted, the touch screen did not work after that.
Thanks!

Go to sammobile.com for the stock roms. You'll have to sign-up but it's free.
Sent from my SGH-I727 using xda app-developers app

Yeah I've been to that site, that's where I got the 2 I mentioned above (i957UCKJ7 and i957UCLK4). I believe the UCLK4 file is ICS, correct? I'm not sure what version the UCKJ7 file is. I did try both. Those were the only 2 roms I could find there for the 8.9 ATT GT. I'll go back and look again. Maybe I missed it.
Thanks for your help

I'm sure those are the only two. The other one is honeycomb. They are the official Samsung roms. I think you've done what you can.
Sent from my SAMSUNG-SGH-I957 using xda app-developers app

This is the second reported occurrence of this happening. Weird
Sent from my SAMSUNG-SGH-I727 using xda premium

orlandoxpolice said:
This is the second reported occurrence of this happening. Weird
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
Make that three ?? .. any resolution so far ?

orlandoxpolice said:
This is the second reported occurrence of this happening. Weird
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
Yea, noticed that too. I used the rom from Sammy but didn't have an issue. I wonder if they got the wrong tab version.
OP, can you post what rom you flashed? And do you have an i957?
Sent from my SAMSUNG-SGH-I957
---------- Post added at 07:43 PM ---------- Previous post was at 07:23 PM ----------
wamaOnline said:
Make that three ?? .. any resolution so far ?
Click to expand...
Click to collapse
You're the second. Weird that a couple of you have had the same problem.
Sent from my SAMSUNG-SGH-I957

Regretfully my tab is not under warranty, and I don't know what to try next? Do you have any ideas

In a small way I'm glad to see that others are experiencing this also.
I wonder if anyone out there has a completely stock rom or knows where I can pick one up? I have tried the 2 over at sammobile and neither brought my touch screen back. I have searched and searched online and can't find anything.
I was reading on a different site while researching this issue and he said he reverted back to his original factory image and the touch screen functionality came back. I'd really just like to get my GT back up and running somehow until this ICS touch screen problem gets figured out.
Thanks ahead for any help.

Sammobile is the stock roms. Use the oldest one, honeycomb. The download is a zip file. To use Odin you'll need to extract the .tar.md5 file out of the zip. Use 7-zip to do that.
Sent from my SAMSUNG-SGH-I957 using xda app-developers app

Yeah I've tried both of the roms on sammobile. Didn't work.
Well, thanks very much for the help. I'll keep checking here through tomorrow to see if anyone else has a suggestion to try and if not I will just mail it back to Samsing on Monday. I hate doing that because I need it for a trip on the 15th. Grrr
Very frustrating.

EraserX33 said:
Yeah I've tried both of the roms on sammobile. Didn't work.
Well, thanks very much for the help. I'll keep checking here through tomorrow to see if anyone else has a suggestion to try and if not I will just mail it back to Samsing on Monday. I hate doing that because I need it for a trip on the 15th. Grrr
Very frustrating.
Click to expand...
Click to collapse
Any updates ? A question, did you try to use a non ATT card ?
Sent from my A500 using xda app-developers app
---------- Post added at 01:50 AM ---------- Previous post was at 01:43 AM ----------
EraserX33 said:
Yeah I've tried both of the roms on sammobile. Didn't work.
Well, thanks very much for the help. I'll keep checking here through tomorrow to see if anyone else has a suggestion to try and if not I will just mail it back to Samsing on Monday. I hate doing that because I need it for a trip on the 15th. Grrr
Very frustrating.
Click to expand...
Click to collapse
One more thing , can you please tell us where did you get your tablet from ? In case it is a he issue from the seller
Sent from my A500 using xda app-developers app

[Q] Accidentally wiped rom from Samsung Galaxy Exhibit 4g.. help!

Hey everybody, new to the forum.. glad to be here!
Here's the deal.. I have googled and searched xda as well as other forums and can not seem to find the answer I am looking for,,
Here's what happened...
I was running 2.3.6. Used CWM and root zip to root my phone. That all worked fine, but next, like a dummy, I went through and started deleting stock apps and accidentally deleted my Live Wallpapers and Wallpapers. So, I used an app (I feel bad for not being able to remember which one, but in the midst of panic I went into last night, it slipped my mind) to unroot it.
When I did this, the stock apps didn't return. I'm guessing because I didn't back them up. So, next I tried to install Flash2stock, thinking that would get me back to where I needed to be. Well, somehow in the menu, I thought it would be a good idea to wipe the rom and everything else.
So, now when I turn my phone on it will boot to "Samsung Galaxt Exhibit 4g" screen and then just boot loop.
In my googling yesterday, I found a page about using ODIN and how I could use it to flash back to stock with my phone. I tried and tried, but Odin will not recognize my phone. I have the correct drivers installed (as far as I can tell) but no luck..
So, I'm here to ask you root gurus about solutions. Are there other methods to restoring my stock rom and getting my phone working again?
or am I just missing something with the Odin stuff?
Please, please, please help! I thank you so much in advance. Not having a phone sucks!

Try uninstalling the drivers and re-installing the ones from here:
http://forum.xda-developers.com/wiki/Samsung_Galaxy_Exhibit_4G
PS: Have you put your phone into download mode before connecting it to your computer? Volume down and power should get you there.

meekrawb said:
Try uninstalling the drivers and re-installing the ones from here:
http://forum.xda-developers.com/wiki/Samsung_Galaxy_Exhibit_4G
PS: Have you put your phone into download mode before connecting it to your computer? Volume down and power should get you there.
Click to expand...
Click to collapse
Thank you for sending me that link. I did not know that I needed a different driver for download mode.. unfortunately both links provided in the wiki page do not work. I am going to google it again and see if I can find them somewhere else.. or if you know of another link that would rule.
And yes I did. I believe I did so correctly. Once the screen with the yellow "!" came up, I pressed the Vol up to get into download mode, then I plugged in my phone, then started Odin. Odin showed the message "Please connect Phone".
I'm running Windows 7 32-bit. And my computer thinks the other driver is called "mtp driver". This is draining, but I am determined to not let a phone beat me

I have done this before, since you have cwm on your phone, all you need to do is download the flash2stock zip to your external sd. Flash via cwm and wait for it to finish, then reboot and let your phone sit for roughly 10 mins. You should be good after that
Sent from my SGH-T679 using xda app-developers app

Thanks again guys. I finally found the srivers I needed and got Odin ti recorgnize my phone.
The method with the sd card would have worked perfectly, but i do not have an sd card reader for my computer. Will definitely be investing in one soon!
When Odin set this guy back up, it install 2.3.5 bavk on here, which is fine because I plan to root and customize anyway.
Any suggestions for kernels/roms i should check out? I have done minimal looking at the ones for my drvice, but intend to.
My main concern is functionality. I need my camera and other apps to work. If they dont, then to me it defeats the purpose.
Also, I do remember the joy os rom that looks like an iphone-ish layout.. Has anybody made one that looks like a windows phone? Ive used the launchers in the past, but it would be cool if there was a rom out there.
Thanks again yall!
Sent from my SGH-T679 using xda app-developers app

ts0rock said:
Thanks again guys. I finally found the srivers I needed and got Odin ti recorgnize my phone.
The method with the sd card would have worked perfectly, but i do not have an sd card reader for my computer. Will definitely be investing in one soon!
When Odin set this guy back up, it install 2.3.5 bavk on here, which is fine because I plan to root and customize anyway.
Any suggestions for kernels/roms i should check out? I have done minimal looking at the ones for my drvice, but intend to.
My main concern is functionality. I need my camera and other apps to work. If they dont, then to me it defeats the purpose.
Also, I do remember the joy os rom that looks like an iphone-ish layout.. Has anybody made one that looks like a windows phone? Ive used the launchers in the past, but it would be cool if there was a rom out there.
Thanks again yall!
Sent from my SGH-T679 using xda app-developers app
Click to expand...
Click to collapse
If you want a windows phone look you could get Cyanogenmod and install a windows phone theme. Then just get Launcher 8. The theme is pretty extensive and does the whole system. Then just get apps like metro messaging to replicate core apps. Also there is a Windows phone keyboard out there somewhere.
Sent from my Galaxy Exhibit 4G