Recently i have come across a puzzling bug when i flashed deodexed UK firmware S5830IXXLK3 (by Alucard1989PL) and was wondering if anyone else had come accross this,
I flash my phone via ODIN 3.07 to stock XXLK3 UK firmware as normal , this gives me stock kernel & ROM.
I fire up ODIN and flash either Rafael or Hells kernel (it doesnt matter which), reboot, check phone status and i have IMEI.
I root my phone via CWM next just to make sure and check that debug is ticked, reboot.
I then flash the S5830IXXLK3 deodexed ROM via CWM, no problem. When the phone boots i check the phone status and each time i have lost my IMEI number.
On all previous deodexed ROMS i have used i have never come accross this, could it be the latest firmware thats been deodexed or am i overlooking a simple detail here?
Any comments would be appreciated.
Viprdxd said:
Recently i have come across a puzzling bug when i flashed deodexed UK firmware S5830IXXLK3 (by Alucard1989PL) and was wondering if anyone else had come accross this,
I flash my phone via ODIN 3.07 to stock XXLK3 UK firmware as normal , this gives me stock kernel & ROM.
I fire up ODIN and flash either Rafael or Hells kernel (it doesnt matter which), reboot, check phone status and i have IMEI.
I root my phone via CWM next just to make sure and check that debug is ticked, reboot.
I then flash the S5830IXXLK3 deodexed ROM via CWM, no problem. When the phone boots i check the phone status and each time i have lost my IMEI number.
On all previous deodexed ROMS i have used i have never come accross this, could it be the latest firmware thats been deodexed or am i overlooking a simple detail here?
Any comments would be appreciated.
Click to expand...
Click to collapse
I haven't problem with IMEI. The deodexed rom has already root so i don't know why you installed root before you install my deodexed xxlk3 rom -_-" LOL. Try reflash rom with odin than my deodexed rom and at last custom kernel . . .
Alucard1989pl said:
I haven't problem with IMEI. The deodexed rom has already root so i don't know why you installed root before you install my deodexed xxlk3 rom -_-" LOL. Try reflash rom with odin than my deodexed rom and at last custom kernel . . .
Click to expand...
Click to collapse
Hey Alu, i tried all methods but result is the same i lose IMEI number, not to worry for now i will try another deodexed. BTW any eta on when you will release 15 toggle for XXLK3? this will motivate me to try again.
Txs for the reply.
Viprdxd said:
Hey Alu, i tried all methods but result is the same i lose IMEI number, not to worry for now i will try another deodexed. BTW any eta on when you will release 15 toggle for XXLK3? this will motivate me to try again.
Txs for the reply.
Click to expand...
Click to collapse
I'll try in this weekend make this mod for xxlk2 and xxlk3.
Alucard1989pl said:
I'll try in this weekend make this mod for xxlk2 and xxlk3.
Click to expand...
Click to collapse
Good stuff :good:
Viprdxd said:
Recently i have come across a puzzling bug when i flashed deodexed UK firmware S5830IXXLK3 (by Alucard1989PL) and was wondering if anyone else had come accross this,
I flash my phone via ODIN 3.07 to stock XXLK3 UK firmware as normal , this gives me stock kernel & ROM.
I fire up ODIN and flash either Rafael or Hells kernel (it doesnt matter which), reboot, check phone status and i have IMEI.
I root my phone via CWM next just to make sure and check that debug is ticked, reboot.
I then flash the S5830IXXLK3 deodexed ROM via CWM, no problem. When the phone boots i check the phone status and each time i have lost my IMEI number.
On all previous deodexed ROMS i have used i have never come accross this, could it be the latest firmware thats been deodexed or am i overlooking a simple detail here?
Any comments would be appreciated.
Click to expand...
Click to collapse
Hi Viprdxd, I have also just experienced this problem after flashing the same XXLK3 UK firmware and then flashing a custom deodexed ROM that I am currently building. My custom ROM is currently based on XXLI1 firmware and I thought there may be some incompatibility problem. However obviously you have flashed Alucard's XXLK3 deodexed ROM so it can't be that. You say its not a kernel issue either so at the moment I currently have very little idea what is causing this. I need to find out though to make my custom ROM compatible with all firmwares so I will be investigating this issue.
I'm just glad I got my IMEI back by reflashing the XXLK3 firmware with ODIN cause I've already permanently lost it once before when I was a bit of a noob and didn't have a backup or anything!
makeyourself said:
Hi Viprdxd, I have also just experienced this problem after flashing the same XXLK3 UK firmware and then flashing a custom deodexed ROM that I am currently building. My custom ROM is currently based on XXLI1 firmware and I thought there may be some incompatibility problem. However obviously you have flashed Alucard's XXLK3 deodexed ROM so it can't be that. You say its not a kernel issue either so at the moment I currently have very little idea what is causing this. I need to find out though to make my custom ROM compatible with all firmwares so I will be investigating this issue.
I'm just glad I got my IMEI back by reflashing the XXLK3 firmware with ODIN cause I've already permanently lost it once before when I was a bit of a noob and didn't have a backup or anything!
Click to expand...
Click to collapse
Yeah I know that feeling all to well when you see your IMEI number missing I'll keep playing around to see if I can find out why but my feeling is its an issue ROM side with XXLK3., Hey good luck with your ROM I'll defo check it out when its done.
Viprdxd said:
Yeah I know that feeling all to well when you see your IMEI number missing I'll keep playing around to see if I can find out why but my feeling is its an issue ROM side with XXLK3., Hey good luck with your ROM I'll defo check it out when its done.
Click to expand...
Click to collapse
Nice one thanks :good:
Edit: Sorry Actually I still can't figure this out, if I flash XXLK3 with ODIN, IMEI number is fine. If I install Rafael's kernel, nothing else, it disappears.
If I extract the XXLK3 ROM and flash it in recovery no problems, if I deodex it no problems, if I install custom kernels then IMEI dissappears.
Which leads me to the conclusion its a problem with custom kernels except for the fact that if I flash the ROM I'm building on stock kernel IMEI also dissappears!! So for now it remains a mystery!
makeyourself said:
Nice one thanks :good:
Edit: Sorry Actually I still can't figure this out, if I flash XXLK3 with ODIN, IMEI number is fine. If I install Rafael's kernel, nothing else, it disappears.
If I extract the XXLK3 ROM and flash it in recovery no problems, if I deodex it no problems, if I install custom kernels then IMEI dissappears.
Which leads me to the conclusion its a problem with custom kernels except for the fact that if I flash the ROM I'm building on stock kernel IMEI also dissappears!! So for now it remains a mystery!
Click to expand...
Click to collapse
I have concluded that its not a problem with XXLK3 or The custom Kernels as both work, let me explain, XXLK3 standard and deodexed on stock (came with package) kernel works as it should. Raf's or Hell's Kernel works fine on every other firmware.
It seems to be a problem of compatibility of the two maybe Samsung changed some small detail or a tweek is needed in the kernels or both? I don't know as I am not a dev.
My thread on what I found: http://forum.xda-developers.com/showthread.php?t=2052690
:highfive:
Related
I have flash a couple of ROMs beginning with the original Chinese leak and currently on Imilka CM9 port. I'd like to revert to stock.
Can I just download and flash the stock ROM from the forums using Odin?
I dont want to brick the thing by flashing something incompatible.
Thank you.
tekomni said:
I have flash a couple of ROMs beginning with the original Chinese leak and currently on Imilka CM9 port. I'd like to revert to stock.
Can I just download and flash the stock ROM from the forums using Odin?
I dont want to brick the thing by flashing something incompatible.
Thank you.
Click to expand...
Click to collapse
If you want to go stock just choose the rom that you want to go back to and flash through odin......period...and you are good
geo.samuel said:
If you want to go stock just choose the rom that you want to go back to and flash through odin......period...and you are good
Click to expand...
Click to collapse
I don't think that necessarily does the whole job. I tried to go back to stock via ODIN - first my keyboard kept saying 'null' when I tried to input letters - which I fixed by flashing the multi CSC for Europe - now I have a working stock ROM but I can't get the OTA update to work. It downloads then fails when the phone boots into the recovery partition. I suspect there is a rooted kernel still lingering in there. I imagine if you download stock firmware with phone, pda, CSC, and pit files included that you wouldn't have the same problems as me, but my UK CPW firmware only comes with the PDA tar
hi.
i have an Australian N7000B Note, and it is currently rooted on the latest available android in the country for the phone (2.3.6)
i have superuser and CWM installed.
i can boot into CWM and navigate with no worries, but whenever i try to install any custom rom, regardless what rom it is, i get the same error.
i really want to get off this crappy rom that Telstra provides with the phone, so any help is greatly appreciated.
many thanks
pic attatched of error.
Use ODIN to flash a stock ICS or GB ROM and then re-root and add cwm and try again
the issue you face is because your version is the GT-N7000B and the build.prop is for the GT-N7000 so its failing because it believes the ROM is for a different device.
if the product codes do not match up in the build.prop it will fail - this applies to all devices and all ROMs.
you could also open the .zip and find the build.prop and change all of them, But its a pain in the ass !
azzledazzle said:
Use ODIN to flash a stock ICS or GB ROM and then re-root and add cwm and try again
the issue you face is because your version is the GT-N7000B and the build.prop is for the GT-N7000 so its failing because it believes the ROM is for a different device.
if the product codes do not match up in the build.prop it will fail - this applies to all devices and all ROMs.
you could also open the .zip and find the build.prop and change all of them, But its a pain in the ass !
Click to expand...
Click to collapse
I've looked everywhere and everywhere for a ICS or GB rom to flash onto the phone using Odin but all of them are for use with CWM, which doesn't work
WHAT !?!?!?!?! theres a whole thread dedicated to stock ODIN ROMs lol !!
http://forum.xda-developers.com/showthread.php?t=1424997
azzledazzle said:
WHAT !?!?!?!?! theres a whole thread dedicated to stock ODIN ROMs lol !!
http://forum.xda-developers.com/showthread.php?t=1424997
Click to expand...
Click to collapse
Because these are for the N7000 if i flash a stock ICS rom on my N7000B what will happen?
http://www.sammobile.com/firmware/?page=8
Put your details in there and it will find you a stock ROM. Ive seen threads where N7000B users have flashed N7000 ROMs without any issues.
EDIT: You CAN use any GT-N7000 firmware !
Awesome! I am downloading the Gingerbread Australian Rom as we speak for the N7000. if i flash it with odin, root it, and then install CWM would it work with installing custom roms such as paranoid android etc?
Yes because the Stock firmware will remove the 'B' and you will have no more install errors
Be sure to follow the instructions to the letter !! and make a nandroid before commencing.
azzledazzle said:
Yes because the Stock firmware will remove the 'B' and you will have no more install errors
Be sure to follow the instructions to the letter !! and make a nandroid before commencing.
Click to expand...
Click to collapse
Well, i have a nandroid backup of the current firmware, i made it just after i rooted it.
so, i will flash it with Odin on PC correct? does it require i wipe everything off the phone?
sorry for the questions i am a noob lol
you can wipe before or after it makes no difference so long as your on GB.
Dont ever wipe on ICS unless your on a safe kernel.
But do do a wipe as it will start you off on a fresh clean install
azzledazzle said:
you can wipe before or after it makes no difference so long as your on GB.
Dont ever wipe on ICS unless your on a safe kernel.
But do do a wipe as it will start you off on a fresh clean install
Click to expand...
Click to collapse
I'm successfully on a N7000 Rom, it unrooted my phone is there a way to root it again?
flash the CWM.zip in recovery and then the SU package
or flash a rooted kernel such as speedmod
azzledazzle said:
flash the CWM.zip in recovery and then the SU package
or flash a rooted kernel such as speedmod
Click to expand...
Click to collapse
I am now on Cyanogen mod 9, thanks so much for your help kind sir, Many internets to you!
read this and be more careful when flashing other phones firmware on different versionhttp://forum.xda-developers.com/showthread.php?t=1698788
I guess the 7000b is very similar no?
Sent from my GT-N7000 using Tapatalk 2
JoshDubstep said:
I am now on Cyanogen mod 9, thanks so much for your help kind sir, Many internets to you!
Click to expand...
Click to collapse
Hi, Can u please help me. I'm having the same problem as u. Got the getprop error when flashing any rom through
How were u able to flash roms through cwm & what file did u use to turn your 7000B into a 7000?
I know out there is a bunch of baseband to flash through Odin. What about make them flashable?. What for?, for example I flashed Enox and Benz roms that are not for my specific model (L) and my phone boot without a problem, but just get not network signal. So I was guessing that will work If I flash my baseband (lubama1) over the one that came with the rom. Will the rom work without a problem I think, cuz that is what I did in my Atrix 4g times.
Why flashable, just to do it on the way. If someone can help me making my stock baseband flashable I will appreciate it.
Thnx
I'm pretty sure those roms doesn't change your modem, but only system files.
Why it doesn't work is probably because the config is for i8190 and not i8190L modem.
Open the rom.zip and see if you find a modem.bin in there.. I think not.
Sir_gpm said:
I know out there is a bunch of baseband to flash through Odin. What about make them flashable?. What for?, for example I flashed Enox and Benz roms that are not for my specific model (L) and my phone boot without a problem, but just get not network signal. So I was guessing that will work If I flash my baseband (lubama1) over the one that came with the rom. Will the rom work without a problem I think, cuz that is what I did in my Atrix 4g times.
Why flashable, just to do it on the way. If someone can help me making my stock baseband flashable I will appreciate it.
Thnx
Click to expand...
Click to collapse
even if you flash your baseband i think it will not work. wrong rom to your variant
any way, if you want, attach your baseband to make it flashable via odin.
Hi, I have a Samsung Galaxy S4 Active.
When I make a call i get no sound, microphone and earpiece are tested and working properly(I CAN'T HEAR THE PERSON, THE PERSON CAN'T HEAR ME).
Also, no sound when I put it on speaker.
I tried installing another stock rom but the problem persists..
First time it happened I removed battery and that solved the problem, now even removing the battery won't make it work.
Please help...
Nobody??
i537 or i9295?
Version of stock ROM?
Method of flash?
Tried factory reset?
I9295, 4.4.2 Kitkat, tried to flash through Odin.. tried factory reset and no result.
Also, I've wiped everything (data,system,boot,etc..) before flashing with Odin, using a custom recovery.
stefan2012 said:
I9295, 4.4.2 Kitkat, tried to flash through Odin.. tried factory reset and no result.
Also, I've wiped everything (data,system,boot,etc..) before flashing with Odin, using a custom recovery.
Click to expand...
Click to collapse
As you said you have checked the speaker phone and mic and confirm that it works so this eliminates any hardware issues.
Did you do the factory reset from within the phone in settings or through custom recovery. Suggest that you do the factory reset from within the phone in settings (prior backup of your internal sdcard data is required as this will get wiped out) as this solves most software / firmware issues. If still problem persists flash the entire firmware through odin (download from sammobile).
I have the same problem in the service menü i have no issue but when i make a call it doesnt work (sorry for my english)
Is it possible to make a logcat too see whats the Problem ?!
Snuk265 said:
I have the same problem in the service menü i have no issue but when i make a call it doesnt work (sorry for my english)
Is it possible to make a logcat too see whats the Problem ?!
Click to expand...
Click to collapse
Not sure if logcat will show the issue, but yes we can check it out.
Normally these issues arise due to either mismatch in firmware (flashing different modem) or issues in the ROM itself. You can check by flashing entire firmware and if issue still persists then do a factory reset from settings (not cwm) and reflashing the firmware.
Did you flash any firmware files / modem and are you on stock touchwiz or custom ROM
JASONRR said:
Not sure if logcat will show the issue, but yes we can check it out.
Normally these issues arise due to either mismatch in firmware (flashing different modem) or issues in the ROM itself. You can check by flashing entire firmware and if issue still persists then do a factory reset from settings (not cwm) and reflashing the firmware.
Did you flash any firmware files / modem and are you on stock touchwiz or custom ROM
Click to expand...
Click to collapse
OK i know
Factory reset from Rom and cwm or stock recovery dosnt help
Reflash stock rom change anything
I was on the latest tw-rom but at the moment i use official cm11
Thanks for your help
Snuk265 said:
OK i know
Factory reset from Rom and cwm or stock recovery dosnt help
Reflash stock rom change anything
I was on the latest tw-rom but at the moment i use official cm11
Thanks for your help
Click to expand...
Click to collapse
Mic in speaker is a known issue in cm11. This has been fixed in 17.10 version. You can flash the 17.10 version and check
Factory reset from stock recovery only wipes the system and data while factory reset from within phone in settings resets much more than that.
Reflashing only stock ROM will not help... You need to flash the entire firmware through odin .
JASONRR said:
Mic in speaker is a known issue in cm11. This has been fixed in 17.10 version. You can flash the 17.10 version and check
Factory reset from stock recovery only wipes the system and data while factory reset from within phone in settings resets much more than that.
Reflashing only stock ROM will not help... You need to flash the entire firmware through odin .
Click to expand...
Click to collapse
I know that is an present issue in cm11 but dont on stock rom .. And with reflash i mean to flash stock Rom with Odin
Thanks in advance
Snuk265 said:
I know that is an present issue in cm11 but dont on stock rom .. And with reflash i mean to flash stock Rom with Odin
Thanks in advance
Click to expand...
Click to collapse
Ok which firmware (stock ROM) did you flash and can you send me a screenshot of your about from stock Rom
How can I know what modem suits my phone? I've flashed another stock rom from another region(earpiece and mic didn't work before) and the issue is still present.
stefan2012 said:
How can I know what modem suits my phone? I've flashed another stock rom from another region(earpiece and mic didn't work before) and the issue is still present.
Click to expand...
Click to collapse
It is always recommended to flash the modem for your region. ROM's generally are independent of region unless you have flashed the entire firmware. UCNE5 firmware so far seems to be safe and is known to work for most regions.
Which country are you from and which ROM did you flash.
I'm having the same problem, using CM11 or Stock.
Phone worked grate till 2 month ago (bougth on february). Tested different modems, different SIMS.
¿Maybe a hardware problem? ¿Maybe is bootloader/KNOX related? I think this as was using last TW from UK (I9295XXUCNH2), I'm from Argentina.
tasken said:
I'm having the same problem, using CM11 or Stock.
Phone worked grate till 2 month ago (bougth on february). Tested different modems, different SIMS.
¿Maybe a hardware problem? ¿Maybe is bootloader/KNOX related? I think this as was using last TW from UK (I9295XXUCNH2), I'm from Argentina.
Click to expand...
Click to collapse
Flashing modem from a different region/carrier is sometimes known to cause this issue with certain carriers. Recommend that you flash only the modem for your region and carrier (not the entire firmware) and check it out else try flashing the entire firmware.
If mic and speaker is working fine in other apps then it will not be a hardware issue.
JASONRR said:
Flashing modem from a different region/carrier is sometimes known to cause this issue with certain carriers. Recommend that you flash only the modem for your region and carrier (not the entire firmware) and check it out else try flashing the entire firmware.
If mic and speaker is working fine in other apps then it will not be a hardware issue.
Click to expand...
Click to collapse
The S4A is not sold in my country, what modem should i use for Latin America?
tasken said:
The S4A is not sold in my country, what modem should i use for Latin America?
Click to expand...
Click to collapse
hmm..this is a tricky one.. You could try the NE5 modem from my drive to start with and see if it works, though I would recommend that you flash the one that you were on before while it was working properly.
Tested NE5 before posting, same results. Using official 20141018.
Original modem was 4.2.2, is there a modem repository?
tasken said:
Tested NE5 before posting, same results. Using official 20141018.
Original modem was 4.2.2, is there a modem repository?
Click to expand...
Click to collapse
I am not aware of one for i9295, from which region was the original modem and did it work in Argentina
tasken said:
The S4A is not sold in my country, what modem should i use for Latin America?
Click to expand...
Click to collapse
Just one more question? are you using GSM or LTE, you could start by trying GSM mode only. Also just remembered this thread I stumbled upon yesterday which may be useful in unlocking the band used in your country/carrier.
http://forum.xda-developers.com/oneplus-one/general/guide-unlock-aditional-bands-qualcomm-t2877031
Edit: another one which I searched and found today
http://forum.xda-developers.com/cro...ad-progress-please-leave-im-updating-t2871269
Did a little search and you may refer to the below links for the bands for Argentina as well as those on I9295 which could be helpful
http://www.gsmarena.com/network-bands.php3?sCountry=ARGENTINA
http://www.gsmarena.com/samsung_galaxy_s4_active_lte_a-5889.php
i9305 Imei shows null/null after flashing I9305XXUFNL1_DBTFNL1 which was a stock rom
Also no signal as you would guess
Now I cant even downgrade to any roms apart from 4.4.4.
Phoen is rooted and tried 4.1.1. I9305XXALI5_I9305EVRALI5_I9305BVALI5 through Odin and Mobile ODIN
On Mobile odin phone looks like its working then stays on the SAMSUNG Logo for ages and nothing, just stays there
I have a Back up of an efs which I done through Rom Manager but not sure if its corrupted or how to restore it
If someone coud give me a walkthrough :highfive:
EwOkie said:
i9305 Imei shows null/null after flashing I9305XXUFNL1_DBTFNL1 which was a stock rom
Also no signal as you would guess
Now I cant even downgrade to any roms apart from 4.4.4.
Phoen is rooted and tried 4.1.1. I9305XXALI5_I9305EVRALI5_I9305BVALI5 through Odin and Mobile ODIN
On Mobile odin phone looks like its working then stays on the SAMSUNG Logo for ages and nothing, just stays there
I have a Back up of an efs which I done through Rom Manager but not sure if its corrupted or how to restore it
If someone coud give me a walkthrough :highfive:
Click to expand...
Click to collapse
Hi,
About IMEI null/null with 4.4.4 firmware, you should search in this Q/A forum, there a lot of threads asking for this issue. Maybe you should get an answer yourself
However, you should try again to do a clean flash of latest official 4.4.4 firmware with ODIN v3.09 by following this GUIDE HERE from @MaHo_66.
AFAIK, it's impossible to downgrade from 4.4.4 because of KNOX bootloader. It has been said many times in this Q/A forum. Maybe it exists somewhere a tricky trick to do it but I'm not aware of this.
FLooDW said:
Hi,
About IMEI null/null with 4.4.4 firmware, you should search in this Q/A forum, there a lot of threads asking for this issue. Maybe you should get an answer yourself
However, you should try again to do a clean flash of latest official 4.4.4 firmware with ODIN v3.09 by following this GUIDE HERE from @MaHo_66.
AFAIK, it's impossible to downgrade from 4.4.4 because of KNOX bootloader. It has been said many times in this Q/A forum. Maybe it exists somewhere a tricky trick to do it but I'm not aware of this.
Click to expand...
Click to collapse
In Addition to @FLooDW 's answer:
Try to use Philz 6.48.4 or 6.59.0 as your recovery rather then TWRP or the old CWM (6.0.4.7), especially DON'T use the latest TWRP from their official website, its a broken build and its known to mess up the partitions! That could be your problem if you have done that before...
Any recovery you want to use, download from my RECOVERY/GUIDE thread that FLooDW linked to you, use those they work fine.
PS. before flashing official firmware with ODIN, make sure you have a custom recovery installed, then boot into recovery, wipe system/data/cache/dalvik-cache/internalSD/boot/modem etc. this is to ensure when you have flashed the firmware, there is nothing left from the previous firmware that was installed.
Note: when explaining your issue, try to do that by providing as much as possible info about your actions before and after the problem occured, that way anyone who wants to help can help you the best way possible.
MaHo_66 said:
In Addition to @FLooDW 's answer:
Try to use Philz 6.48.4 or 6.59.0 as your recovery rather then TWRP or the old CWM (6.0.4.7), especially DON'T use the latest TWRP from their official website, its a broken build and its known to mess up the partitions! That could be your problem if you have done that before...
Any recovery you want to use, download from my RECOVERY/GUIDE thread that FLooDW linked to you, use those they work fine.
PS. before flashing official firmware with ODIN, make sure you have a custom recovery installed, then boot into recovery, wipe system/data/cache/dalvik-cache/internalSD/boot/modem etc. this is to ensure when you have flashed the firmware, there is nothing left from the previous firmware that was installed.
Note: when explaining your issue, try to do that by providing as much as possible info about your actions before and after the problem occured, that way anyone who wants to help can help you the best way possible.
Click to expand...
Click to collapse
Really helpful addition !
Trying what you guys have mentioned just now, let you know as soon as :good:
What 4.4.4. om do you suggest?
Also the efs I backed up (not sure if its working or not as it was with Rom Manager)
How do I restore, can it be done with root explorer?
Tried the [ROM][i9305][18.10.15]>>>4.4.4<<<[KK][STOCK][TW][STABLE][+AROMA] S5 Elite Lite v4.0
which I posted a few days ago, left a post with no reply and thats when I started getting the null/null
PSN_AGNi_pureSTOCK-v5.9.5-4.4.x_I9305_AROMA
Currently trying this rom.. watching the installation set up and says so far that set_perm: some changes failed
used philz_touch_6.59.0-i9305
Rebooting and stays on Samsung Galaxy boot screen ??
EwOkie said:
PSN_AGNi_pureSTOCK-v5.9.5-4.4.x_I9305_AROMA
Currently trying this rom.. watching the installation set up and says so far that set_perm: some changes failed
used philz_touch_6.59.0-i9305
Rebooting and stays on Samsung Galaxy boot screen ??
Click to expand...
Click to collapse
AGNi is not a ROM, this is a kernel. Did you flash AGNi kernel over official Samsung firmware ?
As MaHo_66 said, you have to explain more what you have done and what you need if you want us to help you.
Steps :
reflashed a Stock Rom then Rooted it then added Philz Recovery
Then Tried this rom : I9305XXUFNL1_O2UFOB1_4.4.4_KK.zip
Currently trying various modems to see what this gives me
Failing this will need to try QPTS or EFS Professional again.
* I know how to flash and root roms if you look at my signature along with kernels I am basically telling you what I have tried to get
this null/null away as I think its a baseband/modem issue somewhere as I have read various posts and some people agree.
Cant even do the *#197328640# or *#*#197328640#*#* to get into certain modes
Thinking it maybe the sim card slot now .......... I am losing my mind now!
EwOkie said:
Steps :
reflashed a Stock Rom then Rooted it then added Philz Recovery
Then Tried this rom : I9305XXUFNL1_O2UFOB1_4.4.4_KK.zip
Currently trying various modems to see what this gives me
Failing this will need to try QPTS or EFS Professional again.
* I know how to flash and root roms if you look at my signature along with kernels I am basically telling you what I have tried to get
this null/null away as I think its a baseband/modem issue somewhere as I have read various posts and some people agree.
Cant even do the *#197328640# or *#*#197328640#*#* to get into certain modes
Thinking it maybe the sim card slot now .......... I am losing my mind now!
Click to expand...
Click to collapse
There are few other possible solutions you could try:
- try this, it shows you how to get in service mode and the restoring of the golden efs backup, that should be present if its good.
If above doesnt work, then try the one below.
- have you tried to flash the param_bin file? if not try that with ODIN, it might work.. file attached.
Let us know how it goes.
H yes tied that file and didnt work
will the imei work from another phone or efs?
isnt that link just gps?