Hi all, I need help to flash cm 10.1 nightly or paranoid android from ultimate rom.
I've just flashed this:
http://forum.xda-developers.com/showthread.php?t=1927097
But I've not understood why I need it.
However, when I try to flash a cm 10.1 I have installation aborted status 7.
Help?!
You should go here and flash philz kernel v3.99... Now you a ready to go.
you donot need to flash that.. all you need to make sure is you are on Philz 3.99 version of the XXLSC kernel. boot into recovery and check the about in Philz settings. if its not 3.99 then upgrade it by installing the latest..
http://forum.xda-developers.com/showthread.php?t=1901191
PhilZ-cwm6-XXLSC-XJB-v3.99
flash it from recovery or Mobile odin and then reboot recovery. then you can easily install any rom.. No error 7
Yes I was on XXLSC version of the kernel.
Now i finally flashed paranoidandroid but i have 2 problem.
Don't work central key and aosp keybord crash!
Is it just me seeing this thread double times?
sent from galaxy s4(testing dev edition) using xda premium
refresh your XDA app.. 1 will disappear
Hi, I need help with my Galaxy Note. I just buy secondhand Galaxy Note, it has XXLS2 4.1.1 rom for now. I want flash AOSPA 4.2.1 rom on it. My previous phone was HTC HD2, so I'm used to flashing without limitation So, I need your help to tell me if I'm thing good about it. So, firstly I must flash Philz kernel for my phone, to get root and recovery. But for my rom is only version 2.7... is it safe to flash? And next I can just do full wipe, reboot, and flash AOSPA 4.2.1 rom, yes?
You won't be able to flash a aokp rom using philz 2.7 as it will not install and error 7.
-Install Philz and gain root and cwm
-Then place all the required files to flash the rom to storage.
-Then flash a different safe kernel like hydracore or cm kernel.
-Boot into recovery and do wipes and formats and flash. the rom. (while on a different kernel you might not be able to boot into the rom. Just recovery)
And version 2.7 is safe? Why there is no 3.99 version for this rom? But when I finally flash PA rom, I can stay with kernel included in this rom? Or I need to flash cm kernel second time? I'm going to make backup before flashing new rom, but I'm just wondering if I can normally recover this on PA rom or I need to flash stock philz kernel before restoring... So the "diffrent safe" kernel may be "Kernel_CM10.1_20130126_Nightly_CWM.zip", yes? It will work with aosp based pa rom? I'm going to flash 2.99 version...
sinedoOo said:
And version 2.7 is safe? Why there is no 3.99 version for this rom? But when I finally flash PA rom, I can stay with kernel included in this rom? Or I need to flash cm kernel second time? I'm going to make backup before flashing new rom, but I'm just wondering if I can normally recover this on PA rom or I need to flash stock philz kernel before restoring... So the "diffrent safe" kernel may be "Kernel_CM10.1_20130126_Nightly_CWM.zip", yes? It will work with aosp based pa rom? I'm going to flash 2.99 version...
Click to expand...
Click to collapse
Yes 2.7 is safe. Just that it cannot install some roms.
Because it's and old kernel.
Yes stay with the kernel included in the rom
Yes PA has a safe kernel and the backup can be restored.
Any kernel like hydracore or cm will do.
Also 2.99 PA might not to that's stable. So.. Your choice. You can use and older version like 2.57 as well
Actually Philz 2.7 is ICS/older JB, and therefore not subject to error 7. Good to wipe and Flash ROMs with. (It's safe too)
Sent from my GT-N7000 using xda app-developers app
shoey63 said:
Actually Philz 2.7 is ICS/older JB, and therefore not subject to error 7. Good to wipe and Flash ROMs with. (It's safe too)
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
Need to meditate
GT N7000
hi frds i am having a issue with Amnix Xperia ROM Build 3 for GT N7000. After I installed my antivirus & later when it finished scanning for malware it gives warning about one app - MALICIOUS APP
VOODOO-INSTANT-ANTI-EXYNOS-MEM-ABUSE-0.3.APK
EXPLOIT.EXYNOS.A
can someone pls help....is it a virus....
It's already replied in the noob friendly thread
I forget to reply, sorry. Thanks! It is all working good, so I have now my Galaxy Note with newest Paranoidandroid rom
Hi everyone!
1st: Sorry for my english :silly:
2nd: I need help, i'm very very noob at Android, i recently bought a new Samsung Galaxy Note with ICS 4.0.4 Software Unbrand... The question is, i want to install 4.1.2 ITV (N7000ITVLS4.... ITALY) with odin and later i wanna instal a safe kernel but i don´t know which one... Philz or Hydracore? Which one is better? and which one will able me to unbrand my GN in the case of loosing the Software Unbrand?
3rd: How i install the kernel, i really don´t understand very well the procedure! I have fear about bricking mi new GN...
Thanks !
R: [Q] GT-N7000 Stock ITV Jelly Bean, Philz Or Hydracore?
MarianoQT said:
Hi everyone!
1st: Sorry for my english :silly:
2nd: I need help, i'm very very noob at Android, i recently bought a new Samsung Galaxy Note with ICS 4.0.4 Software Unbrand... The question is, i want to install 4.1.2 ITV (N7000ITVLS4.... ITALY) with odin and later i wanna instal a safe kernel but i don´t know which one... Philz or Hydracore? Which one is better? and which one will able me to unbrand my GN in the case of loosing the Software Unbrand?
3rd: How i install the kernel, i really don´t understand very well the procedure! I have fear about bricking mi new GN...
Thanks !
Click to expand...
Click to collapse
You should first install a hydracore kernel on your actual ics (but maybe it is no need), then flash the new jb rom lsz (the one you said) and after you can choose to flash or philz kernel (v 4.88.2) or speedmod kernel (k5-1). Both are goods! To flash all this, you just need a simple program called Odin
If you go in original android development section, you will find all that you need! Just read carefully the main threads, and all will go fine. There are also screenshots attached to the posts, so it will be more clear. Btw if you have some doubts, post here or pm me (sono italiano anche io )
Edit: ops I just saw you're not Italian
Sent from my GT-N7000 using xda premium
Bad-Pixel said:
Edit: ops I just saw you're not Italian
Click to expand...
Click to collapse
No, he's from Argentina. But recent events make this misunderstanding acceptable (sorry for OT, couldn't resist).
R: [Q] GT-N7000 Stock ITV Jelly Bean, Philz Or Hydracore?
ThaiDai said:
No, he's from Argentina. But recent events make this misunderstanding acceptable (sorry for OT, couldn't resist).
Click to expand...
Click to collapse
Lol yes it's the same thing I thought about
Btw in that procedure, it may be safe, flashing the lsz rom directly without flash a safe kernel before, by odin ofc? Or we absolutely must flash a safe kernel before to flash anything by odin?
Sent from my GT-N7000 using xda premium
Thanks
Bad-Pixel said:
Lol yes it's the same thing I thought about
Btw in that procedure, it may be safe, flashing the lsz rom directly without flash a safe kernel before, by odin ofc? Or we absolutely must flash a safe kernel before to flash anything by odin?
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Thanks for the answer ! I just installed successfully the Italian version of JB !
PD: No, i'm from Buenos Aires, But i'm an Italian Citizen, i have double citizenship...
R: [Q] GT-N7000 Stock ITV Jelly Bean, Philz Or Hydracore?
Nice dude
Glad it worked! If I can give you a personal advice:
Install speedmod kernel (actual is k5-1) using odin, download triangle away (actual should be 2.75.. Search it here on xda, by chainfire) install it and use it to remove the yellow alert triangle at the boot time (please read carefully how to use that apk). Now you got a safe kernel, root permissions and very good performance / stability. Ofc if you do that, you "temporarily" will lose the warranty (cuz of the root and the custom kernel). If you don't want, just keep your note as it is now
Regards!
Sent from my GT-N7000 using xda premium
Bad-Pixel said:
Nice dude
Glad it worked! If I can give you a personal advice:
Install speedmod kernel (actual is k5-1) using odin, download triangle away (actual should be 2.75.. Search it here on xda, by chainfire) install it and use it to remove the yellow alert triangle at the boot time (please read carefully how to use that apk). Now you got a safe kernel, root permissions and very good performance / stability. Ofc if you do that, you "temporarily" will lose the warranty (cuz of the root and the custom kernel). If you don't want, just keep your note as it is now
Regards!
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
I will keep that in mind... But i want to install CM10.1 in mi N7000, my cousin(he has a Galaxy S3 with Philz 4.88.5 and CM10.1) he recommended it to me... I really want the performance/interface given by CyanoGen Mod...
What do you think? Will CM10.1 + Philz Recovery give me a remarkable efficiency that i'm looking for?
Will you recommend my Hydracore Kernel?
R: [Q] GT-N7000 Stock ITV Jelly Bean, Philz Or Hydracore?
MarianoQT said:
What do you think? Will CM10.1 + Philz Recovery give me a remarkable efficiency that i'm looking for?
Will you recommend my Hydracore Kernel?
Click to expand...
Click to collapse
You can't use philz kernel (I'm talking about our galaxy note at least) on any other rom than a Touchwiz based. So unfortunately you can't use it on cm10.1 :/
When I used a cm based, usually I kept the original cm kernel, Btw some of new kernels on xda are interesting! So maybe just try them
For now I'm on ultimate rom, and I'm planning to switch to another one soon (I'm flasholic...)
Sent from my GT-N7000 using xda premium
Bad-Pixel said:
You can't use philz kernel (I'm talking about our galaxy note at least) on any other rom than a Touchwiz based. So unfortunately you can't use it on cm10.1 :/
When I used a cm based, usually I kept the original cm kernel, Btw some of new kernels on xda are interesting! So maybe just try them
For now I'm on ultimate rom, and I'm planning to switch to another one soon (I'm flasholic...)
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Really? Maybe i read wrong ! But there is written that Philz 4.88.5 supports CM10.1 and GT-N7000...
Read This thread http://forum.xda-developers.com/showthread.php?t=2002953
Someone in http://www.Taringa.net recommended me to use Crash Rom with Philz kernel ! And not only one person did that !
What Do You Think? I'm very confused about Android(Kernel/Rom/Recovery)...
PD: I really miss my iPod Touch 4g ! iOS it's heaven for me hahahaha
R: [Q] GT-N7000 Stock ITV Jelly Bean, Philz Or Hydracore?
But dude, that topic is about the galaxy s3 (i9300) and talking about a custom recovery (with few words, the menu from where you install new roms or wipe your note) and not about a kernel. Plus, Dev Crash left our note community some months ago, and his last rom is a jb leak rom Samsung, so I don't recommend you to install it. It's too much old now. Btw, if you wanna some advice about all this story (kernel recovery and other maybe) I advice you to:
First search for some already opened thread, and if you will not any answer to your questions, open a new thread
Sent from my GT-N7000 using xda premium
Auch ! Sorry man ! I had a confusion !
But if you read the Thread there says that it's compatible with N7000... So, i can install Philz 4.88.5 Recovery on my Note !
Reading in the web i found a tutorial of the CM10.1 Official for N7000, i think i will use this ROM in my Note ! What do you think? Any advice?
In the page of CM i found the tutorial... I can't put the link here...
I'm think i will install... CM10.1 4.2.2(Nightly) ROM + Philz 4.88.5 Recovery ! Will this work?
I'm think i will install... CM10.1 4.2.2(Nightly) ROM + Philz 4.88.5 Recovery ! Will this work?
Click to expand...
Click to collapse
Philz kernels only work with Samsung TW roms and no other roms. CM10 has its on kernel or other kernels based on them like DH
nokiamodeln91 said:
Philz kernels only work with Samsung TW roms and no other roms. CM10 has its on kernel or other kernels based on them like DH
Click to expand...
Click to collapse
I said Philz Recovery... With CM10.1 ROM and Kernel !
which Philz recovery are you referring to ? Temp one?
nokiamodeln91 said:
which Philz recovery are you referring to ? Temp one?
Click to expand...
Click to collapse
Philz 4.88.5 Touch CWM 6.0.3.0.... Why?
MarianoQT said:
Philz 4.88.5 Touch CWM 6.0.3.0.... Why?
Click to expand...
Click to collapse
Dont you read? Phil touch recovery + stock kernel is only for touchwiz rom a.k.a stock rom. No cm9 no cm10 or cm10.1. If im not mistaken speedmod kernel is using phil recovery but no touch features it also for stock touchwiz rom. Correct if im wrong
Sent from my GT-N7000 using xda premium
struk in boot
Bad-Pixel said:
You should first install a hydracore kernel on your actual ics (but maybe it is no need), then flash the new jb rom lsz (the one you said) and after you can choose to flash or philz kernel (v 4.88.2) or speedmod kernel (k5-1). Both are goods! To flash all this, you just need a simple program called Odin
If you go in original android development section, you will find all that you need! Just read carefully the main threads, and all will go fine. There are also screenshots attached to the posts, so it will be more clear. Btw if you have some doubts, post here or pm me (sono italiano anche io )
Edit: ops I just saw you're not Italian
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
hi i just want your help pls answer me as soon as possible i installed official 4.1.2 official rom on my note. after that i want to root it and i install philz kernal from cwm. now the phone is not starting not going in recovery mode. only downloading mode. now i dont know waht to do install that rom again or install a kernal first.
altanole said:
hi i just want your help pls answer me as soon as possible i installed official 4.1.2 official rom on my note. after that i want to root it and i install philz kernal from cwm. now the phone is not starting not going in recovery mode. only downloading mode. now i dont know waht to do install that rom again or install a kernal first.
Click to expand...
Click to collapse
Ok resolved
I installed philzkernal matching to my rom via Odin and now is all fine
Sent from my GT-N7000 using xda app-developers app
Right guys heres the info...
Samsung Galaxy Note GT N7000
Rom Version: Ultimate XXLSC ROM
Build number: Ultimate XXLSC JellyBean 4.1.2 v5.1
Kernel Version: 3.0.31 - 593490 [email protected] #3 SMP PREEMPT Tue Nov 27 02:33:05 KST 2012
Now thats out the way let me explain this as clearly as possible.
All i basically want to do is to update my v5.1 to v6.
Well i read through everything and read that I had to be on a safe kernel.
To where my understanding goes I should be doing this:
Going into CWM > wiping the data and stuff > then booting back into CWM using the advanced tab > then installing the new version of the ultimate rom.
I dont need to be flashing philz new version-ed kernel via odin? because the truth is I DNT KNOW HOW TO!! lol
Is that what I should be doing or something else?
Please Help Guys
Appreciate the help Lads.
If your on ultimate ROM already then you should have the kernel that was with the ROM which is safe but your not sure you can flash philz kernel with cwm just download the one for your ROM version in .zip form and flash as normal also with philz kernel you will still have the stock version showing up in your info because his kernel is stock so if your on an custom jb ROM then your kernel is safe just flash as normal another thing is that philz kernel is a touch interface in recovery that is a easy way of knowing if its philz or not but like I said jb and cwm is safe
sent from the the darkness
ttibbetts83 said:
If your on ultimate ROM already then you should have the kernel that was with the ROM which is safe but your not sure you can flash philz kernel with cwm just download the one for your ROM version in .zip form and flash as normal also with philz kernel you will still have the stock version showing up in your info because his kernel is stock so if your on an custom jb ROM then your kernel is safe just flash as normal another thing is that philz kernel is a touch interface in recovery that is a easy way of knowing if its philz or not but like I said jb and cwm is safe
sent from the the darkness
Click to expand...
Click to collapse
Thanks Darkness.. very helpful... Will be flashing the new rom now... Thanks again
Hello everyone, i am new in the forum. I want to install the new paranoid 3.5 on my n7000 with stock JB rom (N7000XXSLZ). My question is if i can flash the hydracore kernel v7 using directly PC Odin without risk hard brick or yellow triangle. Then my idea is to flash the paranoid rom from CWM how can i proceed?
Tanks to all
Check if hydracore kernel can be flashed on JB ROMs on the thread of the kernel. If it is compatible with stock JB ROMs you can safely flash it without any risks. After that you enter the recovery and install the .zip file of PA 3.5
Varad297 said:
Check if hydracore kernel can be flashed on JB ROMs on the thread of the kernel. If it is compatible with stock JB ROMs you can safely flash it without any risks. After that you enter the recovery and install the .zip file of PA 3.5
Click to expand...
Click to collapse
Thanks for your answer! :good::laugh:
hit thanks if i helped!