Hi all, I need help to flash cm 10.1 nightly or paranoid android from ultimate rom.
I've just flashed this:
http://forum.xda-developers.com/showthread.php?t=1927097
But I've not understood why I need it.
However, when I try to flash a cm 10.1 I have installation aborted status 7.
Help?!
You should go here and flash philz kernel v3.99... Now you a ready to go.
you donot need to flash that.. all you need to make sure is you are on Philz 3.99 version of the XXLSC kernel. boot into recovery and check the about in Philz settings. if its not 3.99 then upgrade it by installing the latest..
http://forum.xda-developers.com/showthread.php?t=1901191
PhilZ-cwm6-XXLSC-XJB-v3.99
flash it from recovery or Mobile odin and then reboot recovery. then you can easily install any rom.. No error 7
Yes I was on XXLSC version of the kernel.
Now i finally flashed paranoidandroid but i have 2 problem.
Don't work central key and aosp keybord crash!
Is it just me seeing this thread double times?
sent from galaxy s4(testing dev edition) using xda premium
refresh your XDA app.. 1 will disappear
Related
Hi,
I have an question i want to install a new rom
This one http://forum.xda-developers.com/showthread.php?t=1871713
but is says : Status 7 installation abboted
My cwm base version is 6.0.1.9
This was my other qeustion maybe is that helpful for my new qeustion
http://forum.xda-developers.com/showthread.php?p=35430659#post35430659
Thanks in advance
Seems you are on the leak Samsung jb with philz kernel. You can flash cm10 kernel or hydracore and then select boot into recovery and then flash the ROM. Boot into recovery will be under "advanced"
Sent from my GT-N7000 using xda premium
And where can i find so fast that kernel
ive been searching but i only found cwm rom's not kernels
Gr.
You are using Philz kernel, or you want it?
Sent From My Rooted Samsung Galaxy S2 JB 4.1.2 (GT-I9100)
Hydracore kernel will be in the Original Development Section
So i can install this one Kernel_CM10_20121213_Nightly_CWM
Over my kernel which i have now
Or this one do you know whats better ?
http://forum.xda-developers.com/showthread.php?t=1749863
you can use any. and as you are on TW JB phone wont boot on either. so preload all the required files before flashing the kernel just to be on the safe side
Hi, I need help with my Galaxy Note. I just buy secondhand Galaxy Note, it has XXLS2 4.1.1 rom for now. I want flash AOSPA 4.2.1 rom on it. My previous phone was HTC HD2, so I'm used to flashing without limitation So, I need your help to tell me if I'm thing good about it. So, firstly I must flash Philz kernel for my phone, to get root and recovery. But for my rom is only version 2.7... is it safe to flash? And next I can just do full wipe, reboot, and flash AOSPA 4.2.1 rom, yes?
You won't be able to flash a aokp rom using philz 2.7 as it will not install and error 7.
-Install Philz and gain root and cwm
-Then place all the required files to flash the rom to storage.
-Then flash a different safe kernel like hydracore or cm kernel.
-Boot into recovery and do wipes and formats and flash. the rom. (while on a different kernel you might not be able to boot into the rom. Just recovery)
And version 2.7 is safe? Why there is no 3.99 version for this rom? But when I finally flash PA rom, I can stay with kernel included in this rom? Or I need to flash cm kernel second time? I'm going to make backup before flashing new rom, but I'm just wondering if I can normally recover this on PA rom or I need to flash stock philz kernel before restoring... So the "diffrent safe" kernel may be "Kernel_CM10.1_20130126_Nightly_CWM.zip", yes? It will work with aosp based pa rom? I'm going to flash 2.99 version...
sinedoOo said:
And version 2.7 is safe? Why there is no 3.99 version for this rom? But when I finally flash PA rom, I can stay with kernel included in this rom? Or I need to flash cm kernel second time? I'm going to make backup before flashing new rom, but I'm just wondering if I can normally recover this on PA rom or I need to flash stock philz kernel before restoring... So the "diffrent safe" kernel may be "Kernel_CM10.1_20130126_Nightly_CWM.zip", yes? It will work with aosp based pa rom? I'm going to flash 2.99 version...
Click to expand...
Click to collapse
Yes 2.7 is safe. Just that it cannot install some roms.
Because it's and old kernel.
Yes stay with the kernel included in the rom
Yes PA has a safe kernel and the backup can be restored.
Any kernel like hydracore or cm will do.
Also 2.99 PA might not to that's stable. So.. Your choice. You can use and older version like 2.57 as well
Actually Philz 2.7 is ICS/older JB, and therefore not subject to error 7. Good to wipe and Flash ROMs with. (It's safe too)
Sent from my GT-N7000 using xda app-developers app
shoey63 said:
Actually Philz 2.7 is ICS/older JB, and therefore not subject to error 7. Good to wipe and Flash ROMs with. (It's safe too)
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
Need to meditate
GT N7000
hi frds i am having a issue with Amnix Xperia ROM Build 3 for GT N7000. After I installed my antivirus & later when it finished scanning for malware it gives warning about one app - MALICIOUS APP
VOODOO-INSTANT-ANTI-EXYNOS-MEM-ABUSE-0.3.APK
EXPLOIT.EXYNOS.A
can someone pls help....is it a virus....
It's already replied in the noob friendly thread
I forget to reply, sorry. Thanks! It is all working good, so I have now my Galaxy Note with newest Paranoidandroid rom
I currently using
ROM: AllianceRom JB XXLSC Beta 1.1
Kernel Version: 3.0.31-593490 [email protected]#3
I want to know is that my step for installation correct or not and is that kernel safe to full wipe data?
Step for install:
1) Full wipe data
2) Install the ROM and the GApps
3)Reboot
Will Jelly Beer V4.1.0 get "Error 7" during installation and how to fix it?
What kernel is on the lsc. Is it philz kernel.? Install a cm 10.1 kernel or use an updated philz kernel. You method is right.
nokiamodeln91 said:
What kernel is on the lsc. Is it philz kernel.? Install a cm 10.1 kernel or use an updated philz kernel. You method is right.
Click to expand...
Click to collapse
I think it is philz kernel can i flash CM 10.1 kernel on AllianceRom?
Yes. Boot into recovery and flash the zip or use mobile Odin.
Sent from my Samsung Galaxy SIV using Tapatalk 3
yes. it wont boot the rom but the access to recovery will be there.. from there you can wipe the data and install the new rom
Hello guys! So i have got a problem, i want flash a new firmware but the user that had this phone before has allready flashed a new firmware...
It is an old 2.2 FW but i want a 4.3 FW. However what should i do now? Its rooted allready, and there is a old recovery installed(no option to flash roms)
At first you have to flash a Custom Recovery Mode. For example CWM or TWRP.
Then you can flash your Custom Rom.
Just use Google an you will find an instructions.
For the best experience you can flash it to the latest stock ROM via ODIN, install CF-Root (contains CWM too) and then upgrade to CM 10.2 with fullwipe
Just go to the forum and search cyanogenmod 10.2 from ADC team then they will provide the link to install the CWM. You can install CWM through odin (makesure u got the right odin). Follow strictly the instruction that is provided by the forum
Sent from my GT-I9001 using xda app-developers app
I think there are only Roms by the ADC-Team for the I9001 and not the I9000.
Sent from my GT-I9001 using Tapatalk 4
Here is a instruction ...step by step ...hope it can help
http://forum.xda-developers.com/showthread.php?t=2444308
DjaiGM said:
Hello guys! So i have got a problem, i want flash a new firmware but the user that had this phone before has allready flashed a new firmware...
It is an old 2.2 FW but i want a 4.3 FW. However what should i do now? Its rooted allready, and there is a old recovery installed(no option to flash roms)
Click to expand...
Click to collapse
I'm on stock Rom GB 2.3.6 on my Samsung s plus and I tried to flash any Cyanogen Custom Rom in CWM ( Ics and Jb) and Always i get the same answer . O f course I rooted My phone ,Installed CWM and did all the wipes .Always the same answer no matter what version of Custom rom I tried to flash.What can I do?
Makesure you have to use correct version of cwm to install the cm. I recommend try cyanogenmod 10.1 JB 4.2.x . GO to the cyanogen official rom post (under ADC team).
FOllow all the instruction that stated inside the topic.
Any mismatch of the version of installation can fail to install rom.
Example:
http://forum.xda-developers.com/showthread.php?p=42346733
Sent from my GT-I9001 using xda app-developers app
iulian vu said:
I'm on stock Rom GB 2.3.6 on my Samsung s plus and I tried to flash any Cyanogen Custom Rom in CWM ( Ics and Jb) and Always i get the same answer . O f course I rooted My phone ,Installed CWM and did all the wipes .Always the same answer no matter what version of Custom rom I tried to flash.What can I do?
Click to expand...
Click to collapse
You have i9001
The rom you try to flash is for i9000
mihaitosca said:
You have i9001
The rom you try to flash is for i9000
Click to expand...
Click to collapse
Exactly.
Looks like your installation is failing because the file is for an I9000B. If you want to use CM10.1 on an I9001, you'll need to go here.