Hi,
I have an question i want to install a new rom
This one http://forum.xda-developers.com/showthread.php?t=1871713
but is says : Status 7 installation abboted
My cwm base version is 6.0.1.9
This was my other qeustion maybe is that helpful for my new qeustion
http://forum.xda-developers.com/showthread.php?p=35430659#post35430659
Thanks in advance
Seems you are on the leak Samsung jb with philz kernel. You can flash cm10 kernel or hydracore and then select boot into recovery and then flash the ROM. Boot into recovery will be under "advanced"
Sent from my GT-N7000 using xda premium
And where can i find so fast that kernel
ive been searching but i only found cwm rom's not kernels
Gr.
You are using Philz kernel, or you want it?
Sent From My Rooted Samsung Galaxy S2 JB 4.1.2 (GT-I9100)
Hydracore kernel will be in the Original Development Section
So i can install this one Kernel_CM10_20121213_Nightly_CWM
Over my kernel which i have now
Or this one do you know whats better ?
http://forum.xda-developers.com/showthread.php?t=1749863
you can use any. and as you are on TW JB phone wont boot on either. so preload all the required files before flashing the kernel just to be on the safe side
Hi all, I need help to flash cm 10.1 nightly or paranoid android from ultimate rom.
I've just flashed this:
http://forum.xda-developers.com/showthread.php?t=1927097
But I've not understood why I need it.
However, when I try to flash a cm 10.1 I have installation aborted status 7.
Help?!
You should go here and flash philz kernel v3.99... Now you a ready to go.
you donot need to flash that.. all you need to make sure is you are on Philz 3.99 version of the XXLSC kernel. boot into recovery and check the about in Philz settings. if its not 3.99 then upgrade it by installing the latest..
http://forum.xda-developers.com/showthread.php?t=1901191
PhilZ-cwm6-XXLSC-XJB-v3.99
flash it from recovery or Mobile odin and then reboot recovery. then you can easily install any rom.. No error 7
Yes I was on XXLSC version of the kernel.
Now i finally flashed paranoidandroid but i have 2 problem.
Don't work central key and aosp keybord crash!
Is it just me seeing this thread double times?
sent from galaxy s4(testing dev edition) using xda premium
refresh your XDA app.. 1 will disappear
Hi, I need help with my Galaxy Note. I just buy secondhand Galaxy Note, it has XXLS2 4.1.1 rom for now. I want flash AOSPA 4.2.1 rom on it. My previous phone was HTC HD2, so I'm used to flashing without limitation So, I need your help to tell me if I'm thing good about it. So, firstly I must flash Philz kernel for my phone, to get root and recovery. But for my rom is only version 2.7... is it safe to flash? And next I can just do full wipe, reboot, and flash AOSPA 4.2.1 rom, yes?
You won't be able to flash a aokp rom using philz 2.7 as it will not install and error 7.
-Install Philz and gain root and cwm
-Then place all the required files to flash the rom to storage.
-Then flash a different safe kernel like hydracore or cm kernel.
-Boot into recovery and do wipes and formats and flash. the rom. (while on a different kernel you might not be able to boot into the rom. Just recovery)
And version 2.7 is safe? Why there is no 3.99 version for this rom? But when I finally flash PA rom, I can stay with kernel included in this rom? Or I need to flash cm kernel second time? I'm going to make backup before flashing new rom, but I'm just wondering if I can normally recover this on PA rom or I need to flash stock philz kernel before restoring... So the "diffrent safe" kernel may be "Kernel_CM10.1_20130126_Nightly_CWM.zip", yes? It will work with aosp based pa rom? I'm going to flash 2.99 version...
sinedoOo said:
And version 2.7 is safe? Why there is no 3.99 version for this rom? But when I finally flash PA rom, I can stay with kernel included in this rom? Or I need to flash cm kernel second time? I'm going to make backup before flashing new rom, but I'm just wondering if I can normally recover this on PA rom or I need to flash stock philz kernel before restoring... So the "diffrent safe" kernel may be "Kernel_CM10.1_20130126_Nightly_CWM.zip", yes? It will work with aosp based pa rom? I'm going to flash 2.99 version...
Click to expand...
Click to collapse
Yes 2.7 is safe. Just that it cannot install some roms.
Because it's and old kernel.
Yes stay with the kernel included in the rom
Yes PA has a safe kernel and the backup can be restored.
Any kernel like hydracore or cm will do.
Also 2.99 PA might not to that's stable. So.. Your choice. You can use and older version like 2.57 as well
Actually Philz 2.7 is ICS/older JB, and therefore not subject to error 7. Good to wipe and Flash ROMs with. (It's safe too)
Sent from my GT-N7000 using xda app-developers app
shoey63 said:
Actually Philz 2.7 is ICS/older JB, and therefore not subject to error 7. Good to wipe and Flash ROMs with. (It's safe too)
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
Need to meditate
GT N7000
hi frds i am having a issue with Amnix Xperia ROM Build 3 for GT N7000. After I installed my antivirus & later when it finished scanning for malware it gives warning about one app - MALICIOUS APP
VOODOO-INSTANT-ANTI-EXYNOS-MEM-ABUSE-0.3.APK
EXPLOIT.EXYNOS.A
can someone pls help....is it a virus....
It's already replied in the noob friendly thread
I forget to reply, sorry. Thanks! It is all working good, so I have now my Galaxy Note with newest Paranoidandroid rom
Right guys heres the info...
Samsung Galaxy Note GT N7000
Rom Version: Ultimate XXLSC ROM
Build number: Ultimate XXLSC JellyBean 4.1.2 v5.1
Kernel Version: 3.0.31 - 593490 [email protected] #3 SMP PREEMPT Tue Nov 27 02:33:05 KST 2012
Now thats out the way let me explain this as clearly as possible.
All i basically want to do is to update my v5.1 to v6.
Well i read through everything and read that I had to be on a safe kernel.
To where my understanding goes I should be doing this:
Going into CWM > wiping the data and stuff > then booting back into CWM using the advanced tab > then installing the new version of the ultimate rom.
I dont need to be flashing philz new version-ed kernel via odin? because the truth is I DNT KNOW HOW TO!! lol
Is that what I should be doing or something else?
Please Help Guys
Appreciate the help Lads.
If your on ultimate ROM already then you should have the kernel that was with the ROM which is safe but your not sure you can flash philz kernel with cwm just download the one for your ROM version in .zip form and flash as normal also with philz kernel you will still have the stock version showing up in your info because his kernel is stock so if your on an custom jb ROM then your kernel is safe just flash as normal another thing is that philz kernel is a touch interface in recovery that is a easy way of knowing if its philz or not but like I said jb and cwm is safe
sent from the the darkness
ttibbetts83 said:
If your on ultimate ROM already then you should have the kernel that was with the ROM which is safe but your not sure you can flash philz kernel with cwm just download the one for your ROM version in .zip form and flash as normal also with philz kernel you will still have the stock version showing up in your info because his kernel is stock so if your on an custom jb ROM then your kernel is safe just flash as normal another thing is that philz kernel is a touch interface in recovery that is a easy way of knowing if its philz or not but like I said jb and cwm is safe
sent from the the darkness
Click to expand...
Click to collapse
Thanks Darkness.. very helpful... Will be flashing the new rom now... Thanks again
Hello,
I want to install Kitkar 4.4 on my Samsung Galaxy Note GT-N7000(India).
I'm completely not aware for this android installation. So please help me.
Please tell me steps and download links. I tried steps which is i got fro internet but most of the time file location was banned by government or removed. So again tried with CWM but still i got stuck. Now I'm using Android Jelly Bean 4.1.2, Build no- JZO54K.N7000DLSC, Kernel version- 3.0.31-906407(SMP PREEMPT WED MARCH 6 19:53:40 KST 2013). This is my phone details. Please suggest me for this model.
Thanks in advance.
Rahul.
I use Firefox with anonimox extesion to bypass the banned's site... But i'm in Italia. You Can try.
The Step to install kilkat are:
Install The correct philz kernel version.
Install the raw kernel and reboot the recovery.
Full wipe.
Install the 4.4 Rom
Install the gapps.
Wipe cache and dalvik
Roboot.
Inviato dal mio GT-N7000 utilizzando Tapatalk
try cm11 by herna (try the latest built by frantisheq) really stable and smooth
btw: full wipe means wipe data, wipe cache, wipe dalvik and manually format /system.
Sent from my GT-N7000 using XDA Premium 4 mobile app
I've tried to install 4.4 kitkat on my note n7000 too but there are too much cusrom, such as asylum,omnirom, cyogenmod and much recovery mode like cwm,twrp, this is make me so frustating, what to choose what to install? If anyone can guide newbie like us step by step and also the link, the best step that never make our phone brick
just stay away from Stock ICS kernel (dont wipe anything using stock ics recovery)
then root your rom and make a backup of your efs (this is the most important step)
now each thread contains all the steps you need to follow, just read them carefully)
I advice you to try herna cm11 (very stable)
regards
Sent from my GT-N7000 using XDA Premium 4 mobile app
done install philz kernel+safe kernel for my JB 4.1.2 and supersu 1.89. Want to install kitkat 4.4 but don't know where to start :crying:
aphinxwu said:
done install philz kernel+safe kernel for my JB 4.1.2 and supersu 1.89. Want to install kitkat 4.4 but don't know where to start :crying:
Click to expand...
Click to collapse
Ok my friend
I use this method to install cm 11 4.4 kitkat
1- I install philz kernel+safe kernel for my JB 4.1.2
2- I install cm 10.2 (4.3) or cm10.1 (4.2.2)
3- I install cm11(4.4)
It work to me and I install 3 kitkat rom
Or as he is already on philz kernel, just flash raw kernel reboot recovery and flash omnirom or asylum omnirom or Nameless Rom or DU or SlimKat
Sent from my GT-N7000 using Tapatalk
Dawood Al Amri said:
Ok my friend
I use this method to install cm 11 4.4 kitkat
1- I install philz kernel+safe kernel for my JB 4.1.2
2- I install cm 10.2 (4.3) or cm10.1 (4.2.2)
3- I install cm11(4.4)
It work to me and I install 3 kitkat rom
Click to expand...
Click to collapse
So if i want to install kitkat, after i install philz kernel then i directly install cm11 (4.4) ? why you install 3 kitkat rom?
treacherous_hawk said:
Or as he is already on philz kernel, just flash raw kernel reboot recovery and flash omnirom or asylum omnirom or Nameless Rom or DU or SlimKat
Sent from my GT-N7000 using Tapatalk
Click to expand...
Click to collapse
sorry i'm newbie, how to flash raw kernel? flash is mean install? sorry stupid question.
aphinxwu said:
So if i want to install kitkat, after i install philz kernel then i directly install cm11 (4.4) ? why you install 3 kitkat rom?
Click to expand...
Click to collapse
I mean if you want to install kitkat in your phon and you have 4.1.2 by recovery philz you must install cm10.2 Jely been 4.3 after you install 4.3 you can install 4.4 kitkat
I use this method and I install 3 rom kitkat
Dawood Al Amri said:
I mean if you want to install kitkat in your phon and you have 4.1.2 by recovery philz you must install cm10.2 Jely been 4.3 after you install 4.3 you can install 4.4 kitkat
I use this method and I install 3 rom kitkat
Click to expand...
Click to collapse
wow so much step huh. maybe theres a more shortcut way if dont, i'm gonna take your way
aphinxwu said:
wow so much step huh. maybe theres a more shortcut way if dont, i'm gonna take your way
Click to expand...
Click to collapse
Install this recovery
http://downloadandroidrom.com/file/GalaxyNote/recovery/n7000-CWM-KitKatCompatible.zip
Aftarthat you can install kitkat 4.4.2
Just flash the raw Kernel from this thread:
http://forum.xda-developers.com/showthread.php?t=2397000
Then reboot into recovery directly (DO NOT reboot into system) then flash directly whatever you want of KitKat based ROMs.
Remember to follow the instructions of each ROM that is mentioned in the opening post of the thread.
kaborayyan said:
Just flash the raw Kernel from this thread:
http://forum.xda-developers.com/showthread.php?t=2397000
Then reboot into recovery directly (DO NOT reboot into system) then flash directly whatever you want of KitKat based ROMs.
Remember to follow the instructions of each ROM that is mentioned in the opening post of the thread.
Click to expand...
Click to collapse
thanks you for the link source. it help me cm10.2 is the latest?
Dawood Al Amri said:
Install this recovery
http://downloadandroidrom.com/file/GalaxyNote/recovery/n7000-CWM-KitKatCompatible.zip
Aftarthat you can install kitkat 4.4.2
Click to expand...
Click to collapse
is this recovery support kitkat nameless? i would like to install nameless. thank you for the link
Dawood Al Amri said:
Install this recovery
http://downloadandroidrom.com/file/GalaxyNote/recovery/n7000-CWM-KitKatCompatible.zip
Aftarthat you can install kitkat 4.4.2
Click to expand...
Click to collapse
Hey i already follow ur instruction and it works. Thank you. Very happy this is the first time for me changing rom :fingers-crossed:
but there's question i want to ask you, can i still use philz kernel to install rom kitkat? because i prefer philz kernel UI than cwm
Thank you sir
aphinxwu said:
Hey i already follow ur instruction and it works. Thank you. Very happy this is the first time for me changing rom :fingers-crossed:
but there's question i want to ask you, can i still use philz kernel to install rom kitkat? because i prefer philz kernel UI than cwm
Thank you sir
Click to expand...
Click to collapse
as mentioned earlier you need raw kernel to flash omnirom, you will get error if you try to flash using philz kernel.
treacherous_hawk said:
as mentioned earlier you need raw kernel to flash omnirom, you will get error if you try to flash using philz kernel.
Click to expand...
Click to collapse
ooo i understand. what's different between kernel and raw kernel? i install kitkat with cwm it works.
aphinxwu said:
ooo i understand. what's different between kernel and raw kernel? i install kitkat with cwm it works.
Click to expand...
Click to collapse
Raw kernel has SElinux support and that is required to be able to flash kitkat.
treacherous_hawk said:
Raw kernel has SElinux support and that is required to be able to flash kitkat.
Click to expand...
Click to collapse
so cwm is raw kernel too. How we know what kernel is support SELinux? So, if i dont instal philz kernel on my official stock rom before and then directly install cwm, so after that i can install kitkat ?
aphinxwu said:
so cwm is raw kernel too. How we know what kernel is support SELinux? So, if i dont instal philz kernel on my official stock rom before and then directly install cwm, so after that i can install kitkat ?
Click to expand...
Click to collapse
raw kernel r4 is cwm while r5 is TWRP. To root and get custom recovery for your stock rom,you must flash philz kernel. Once you have philz kernel, reboot recovery and from there flash r4 or r5 kernel and again reboot recovery and then do the wipes and flash any kitkat rom with gapps. Kernel with SELinux support are raw kernel, r4 and r5, Asylum kernel http://asylumrom.com/Asylum/Asylum-Roms/KitKat-4.4/N7000/kerner/.