[Q] Kernal replace - Galaxy Ace S5830i General

Hi guys my self steaven and i own Samsung galaxy ace Gt-s5830i and i have rooted and installed custom os AceCream V1.4 before with the kernel and now i have installed jelly blast 3.0.4 and the Rafael.Baugis my question is can i remove both of the ROM and kernel and install the stock ROM with stock kernel i have already backed up stock ROM before installing custom ROM. The issue is i have to go for warrenty replace so can i do with it please help an bit new here
Thanks :good:

steaven1441 said:
Hi guys my self steaven and i own Samsung galaxy ace Gt-s5830i and i have rooted and installed custom os AceCream V1.4 before with the kernel and now i have installed jelly blast 3.0.4 and the Rafael.Baugis my question is can i remove both of the ROM and kernel and install the stock ROM with stock kernel i have already backed up stock ROM before installing custom ROM. The issue is i have to go for warrenty replace so can i do with it please help an bit new here
Thanks :good:
Click to expand...
Click to collapse
Flash back to stock with odin
Open the zip of the rom
Remove the boot.img
Flash it!
Sent from my GT-S5830i using xda premium

Related

[Q] new user here on galaxy ace

hi guys i'm new here
how do i use this mod?
[KERNEL][STOCK GB 2.3.x] 06-11-2012 PSN>> Kernel Memory-Modded SWAPALL v3.0 & SuperSU
what are the prereqs?
do need to root? flash CWM? custom Rom or stock rom?
installation Procedure pls!
i really have no idea pls help!
Thanks In Advance!
im using galaxy ace s5830
Monmimi17 said:
hi guys i'm new here
how do i use this mod?
[KERNEL][STOCK GB 2.3.x] 06-11-2012 PSN>> Kernel Memory-Modded SWAPALL v3.0 & SuperSU
what are the prereqs?
do need to root? flash CWM? custom Rom or stock rom?
installation Procedure pls!
i really have no idea pls help!
Thanks In Advance!
im using galaxy ace s5830
Click to expand...
Click to collapse
You need to root, flash cwm and flash the rom through cwm. Instructions on flashing the rom are given on its thread. Instructions on rooting are given as a sticky in the general page. Good luck.
Press thanks if I helped!
Sent from my GT-S5830 using xda premium

[Q] Installing new rom

Hi,
I have an question i want to install a new rom
This one http://forum.xda-developers.com/showthread.php?t=1871713
but is says : Status 7 installation abboted
My cwm base version is 6.0.1.9
This was my other qeustion maybe is that helpful for my new qeustion
http://forum.xda-developers.com/showthread.php?p=35430659#post35430659
Thanks in advance
Seems you are on the leak Samsung jb with philz kernel. You can flash cm10 kernel or hydracore and then select boot into recovery and then flash the ROM. Boot into recovery will be under "advanced"
Sent from my GT-N7000 using xda premium
And where can i find so fast that kernel
ive been searching but i only found cwm rom's not kernels
Gr.
You are using Philz kernel, or you want it?
Sent From My Rooted Samsung Galaxy S2 JB 4.1.2 (GT-I9100)
Hydracore kernel will be in the Original Development Section
So i can install this one Kernel_CM10_20121213_Nightly_CWM
Over my kernel which i have now
Or this one do you know whats better ?
http://forum.xda-developers.com/showthread.php?t=1749863
you can use any. and as you are on TW JB phone wont boot on either. so preload all the required files before flashing the kernel just to be on the safe side

[Q] how to install paranoid 3.5 on stock JB N7000LSZ

Hello everyone, i am new in the forum. I want to install the new paranoid 3.5 on my n7000 with stock JB rom (N7000XXSLZ). My question is if i can flash the hydracore kernel v7 using directly PC Odin without risk hard brick or yellow triangle. Then my idea is to flash the paranoid rom from CWM how can i proceed?
Tanks to all
Check if hydracore kernel can be flashed on JB ROMs on the thread of the kernel. If it is compatible with stock JB ROMs you can safely flash it without any risks. After that you enter the recovery and install the .zip file of PA 3.5
Varad297 said:
Check if hydracore kernel can be flashed on JB ROMs on the thread of the kernel. If it is compatible with stock JB ROMs you can safely flash it without any risks. After that you enter the recovery and install the .zip file of PA 3.5
Click to expand...
Click to collapse
Thanks for your answer! :good::laugh:
hit thanks if i helped!

Galaxy S plus i9001-Ican't flash any custom Rom from stock Rom

I'm on stock Rom GB 2.3.6 on my Samsung s plus and I tried to flash any Cyanogen Custom Rom in CWM ( Ics and Jb) and Always i get the same answer . O f course I rooted My phone ,Installed CWM and did all the wipes .Always the same answer no matter what version of Custom rom I tried to flash.What can I do?
Makesure you have to use correct version of cwm to install the cm. I recommend try cyanogenmod 10.1 JB 4.2.x . GO to the cyanogen official rom post (under ADC team).
FOllow all the instruction that stated inside the topic.
Any mismatch of the version of installation can fail to install rom.
Example:
http://forum.xda-developers.com/showthread.php?p=42346733
Sent from my GT-I9001 using xda app-developers app
iulian vu said:
I'm on stock Rom GB 2.3.6 on my Samsung s plus and I tried to flash any Cyanogen Custom Rom in CWM ( Ics and Jb) and Always i get the same answer . O f course I rooted My phone ,Installed CWM and did all the wipes .Always the same answer no matter what version of Custom rom I tried to flash.What can I do?
Click to expand...
Click to collapse
You have i9001
The rom you try to flash is for i9000
mihaitosca said:
You have i9001
The rom you try to flash is for i9000
Click to expand...
Click to collapse
Exactly.
Looks like your installation is failing because the file is for an I9000B. If you want to use CM10.1 on an I9001, you'll need to go here.

Installing CM11 (ROM) from stock android Gingerbread

Good Day,
I want to ask if I can directly install a custom ROM on my GT-N7000 running on stock anrdoid Gingerbread.
Thank you.
chiechieyap said:
Good Day,
I want to ask if I can directly install a custom ROM on my GT-N7000 running on stock anrdoid Gingerbread.
Thank you.
Click to expand...
Click to collapse
Yes..
Flash Phil jb kernel using Odin... Then use that recovery to flash a cm11 kernel like raw kernel.. Then flash the kitkat rom... You should make the backup of your current rom if you want before installing the newer OS kernel.
Thanks for the reply. Can you give me the links so I can make the procedure. And also what is the latest stock rom for the GT-N7000? Thanks.
Just check the development section of xda n7000.. All links are there and for latest jb rom you can check samfirmware.com

Categories

Resources