[Q] Can't get Cyanogen 7 to work - XPERIA X8 Q&A, Help & Troubleshooting

Been trying this for about 3 hours now, and now I can't even access recovery.
I had Cyanogen 6 and 3 weeks ago I decided to upgrade to Cyanogen 7, however, I read somewhere that its easier if you downgrade your X8 to stock kernel and Android 2.1, so I did. Weirdly enough, it turned into a W8 instead of an X8, so I was using the W8 kernel instead. The root and everything was gone too, so today I rooted it again and I had some problems with installing xRecovery, took me about an hour to get that working and then I installed CyanogenMod 7 - only to forget ClockworkMod, therefore it gave me errors (Status 7) so after about half an hour of not knowing that I finally found out that I needed to install ClockworkMod. I did so and now I installed Cyanogen 7 and it said that it was successful, however, when I boot into the phone its stuck on the Sony Ericsson logo. I can't enter Recovery or anything, its just stuck.
I really don't wanna start all over again, and if I have to I want a noob step-to-step with pictures guide since I've followed about 5 guides now and none of them works.
What do?

Even though it has only been up for less than an hour, could I get some help really soon? I got school tomorrow and I gotta go to bed and I really can't go there without my phone.

Do what you did but now full wipe/factory reset before installing.
What rom exactly did you try?was it for stock kernel?
Sent from my X8 using xda premium

Related

Boot Loop?

Right, I have been on froyo for about a week and have been missing certain cyan features so decided to flash back. Flashed the old radio through fastboot and then flashed the new test5. Phone shows the first nexus logo and thats it. I know it sometimes takes longer with first boot, but it has been sitting there for half hour.
Thought I might try flashing froyo again?
Any suggestions.?
Wipe and re-flash
Have tried that already, but doing it again now. Got some weird write error when trying to flash Pauls froyo again. :/ Went with test 5 again.
Edit: How long does it take on first boot. Mine is still sitting there.
Have tried a nandroid restore as i couldn't think of anything else. And it seems to work, getting past first screen as i type.
If is cyanogen 5.0.8, then I believe it needs froyo radio
Rellikzephyr
-------------------------------------
Sent via the XDA Tapatalk App
That would be the solution, cheers matee.

[Q] Phone stuck on Cyanogen

Hi
I bought an Xperia x8i last week and wanted to update with the newest custom rom out there.
I rooted, xrecovered and installed GingerDX 007.
When i turned on the phone it showed me some logos and went in loop a couple of times on the Cyanoged CM7 logo then freezed.
Can anyone suggest what to do to go ahead?
Since i'm a really smart man i did not backup before doing the update.zip install :|
Did you change the file to update.zip?if so you gotta full wipe it.
Sent from my X8 using XDA App
I <3 U!
The wipe did it. I was scared to do that because thought that it would delete update.zip thus blocking my phone since the OS is there (right?)

[Q] problem installing cassies Xtralite ROM

I hear its a good rom so im trying to install the 4.0 version. Every time i do i get her custom loading screen, but it just cycles over and over, i tried using cwm to restore then re install her rom, but it never works, 5 attempts so far. i use kka version. Any thoughts? I came from a different rom, tried from sheep v2, then reverted to factory, tried that, nothing, i even tried from another mod abyss 1.5. Nothing still. So frustrated ughhhhh ><
Basically you are not supposed to experience any problems as it is a very easy installation, the only thing is that it takes ages for the first boot to load so you might wanna give another try and let it boot for few mins b4 giving up
Good luck
P.s
Follow the wipe/no wipe instructions on the OP
Sent from my GT-N7000 using xda premium
oddly it works now, though it is infact "lite" it isnt as fast as id hoped, if she would just incorporate a overclocking method :'(

Won't boot after flashing DerTeufel'S [ROM] Jellybean [4.1.1]

Hello,
I tried searching for my problem in the forums but I didn't find my exact setup and don't want to brick my phone. (Well maybe it already is)
I had Cyanogenmod 7 for quite a while and tried the Nightlies for 9 some months ago. In the early days of my phone I used ODIN to flash the newest Stock firmwares and then used the chroot kernel to root my phone and install cwm. Since then I installed Cyanogenmod 7 and later Cyanogenmod 9 Nightlies with cwm recover and there was never a problem.
Today I tried the ROM from DerTeufel1980 http://forum.xda-developers.com/showthread.php?p=28819140
I flashed the rom, the addons, the superuser and google now fix. Then I flashed the kernel Devil3_1.0.0-Rc5_datadata_i9000_CFS_BLN_CMC_20120719.zip and fixed permissions. After that my phone wouldn't boot. The boot animation was the old standard android logo.
I managed to get into Devil Kernel Recovery and thought to try a reflash of just the ROM but when I try to "choose a zip" it always tells me
E:can't mount /sdcard/
After that I flashed the kernel with odin and now the phone seems to boot but veeeery slow and it has a ton of flickering the whole time. The bootanimation is the cyanogenmod 9 boot animation. I got into Devil Recovery and I still can't mount the sdcard. And it seems that it doesn't detect my sim card.
I hope you can help me.
Edit: Actually after rebooting several times the boot sped up and I could get into the ROM. I still can't mount the internal sdcard though and I have no phone functionality. It seems that my IMEI number is gone.
Hey
Downgrade your sgs to 2.3.6 valuepack using odin3...
Then root it and use it for a day atleast..
Then flash CM9 nightly..use that for a day too..
Then flash JB...not the same one u did earlier..
Instead Goto teamjellybean.noez.in (ad www.)
Find d latest version of jb and follow the instruction there..
Cheers
Sent from my GT-I9000 using xda app-developers app
Thanks that's exactly what I have done and it worked.
I've seen a lot of folks saying that they might have bricked their phones when some issue occured while flashing a new rom.
Personally whenever I face issues, I just goto the Download mode and Flash a GB rom and then move my way up (GB --> ICS --> JB).
As long as you can go into Download mode, shouldnt be a problem
Fwiw, I lost my IMEI for the first time trying out the JBs. Not sure if it was Slim or DerTeufel's. I ended up with the kind that allows you to connect to your mobile provider, a fake but working IMEI. But when I saw that I tried to go to GB and it didn't come back automagically. And the IMEI was totally wiped so I couldn't even register on the network. Ended up getting to ICS and only then did Root Browser let me write to the efs folder.
Lesson, in short: make a backup zip of your efs folder (to preserve permissions) and double back it up using Nitrality from the Play store.
Glad you got yours back, too.
sent from a telephonic device
tchindalia said:
Hey
Downgrade your sgs to 2.3.6 valuepack using odin3...
Then root it and use it for a day atleast..
Then flash CM9 nightly..use that for a day too..
Then flash JB...not the same one u did earlier..
Click to expand...
Click to collapse
OK, so I'm *definitely* a crappy speed-reader, because I missed this part about waiting on each version. What does the waiting do? I'm now wondering if that means I need to use the phone and, with the restored /efs folder, sometimes later /dev/block/stl3 will repopulate itself with the proper info.
Hey
I asked to wait on roms coz it can just make a few things working...like data..if it doesnt work on 1 rom it would not (probably) work on the next update..(personal experience)..
Cheers
If my post helped, don't mind hitting the Thanks button..

[Q] Need help/input for ROM/Kernal upgrade

OK before anyone flames me I already searched... and searched.... and searched & couldn't find the information I needed. I am only asking for assistance/input from members who are knowledgable on flashing ROMs & Kernals. Unfortunatly XDA is growing at a rate that makes searching almost unbearable.
OK to the reason for the post. I am finally looking to flash my AT&T Samsung Captivate to a custom ROM. No I don't need help flashing, got that covered. I am looking to upgrade to CM9 (Stable). I was also looking at maybe flashing the Devil Kernal also. I had originaly upgraded to ICS from Samsung via kies & rooted my phone. It ran fine with no problems for several months. Sometime a few weeks ago it started to random reboot or crash & reboot for no apparent reason. It finally locked up completly & could only use the 3 button to get it to move. I previously posted trying to get help with that here (http://forum.xda-developers.com/showthread.php?t=1957224). The only way I could get it to come back was to go into recovery, do a factory reset & wipe everything. So now I am back to 2.3.5 (2.6.35.7-I897UCkk4-CL614489). Also my phone is currently not rooed as a result of the wipeout. My phone is running like crap now after all that & what I consider fuctioning minimally.
So now the assistance/input portion of the thread. Because of the problems I had prior & the current state of the phone how should I proceed? Because of what I am looking to do with both the ROM & Kernal & being unrooted. Is there some app or PC program I should run to check my phone to make sure its not a hardware issue? Also should I get to a state & flash the kernal first then go to CM9? Do I need to flash the kernal at all? Forum posts are like a spiders web & some say yes, others no. My head feels like it is going to explode!
I am just looking to do this in the best way possible to achieve the best success. I unfortunatly don't have a lot of time to keep flashing ROMs all the time & funds are tight with family so buying a new S3 isn't going to happen either. Im hoping that someone knowledgable with the android system can help me do this right.
Thanks in advanced!
Chris
HELP!
OK so I took the plunge & screwed my phone up. I tried piecing info from about 20 different threads & somewhere it went wrong. If anyone actually reads this please take the 2 seconds to help. Another sites members already pissed me off with their "oh a noob" crap. I swear as much crap as people give the i-freaks its seeming more and more that the android community is becoming just as bad.
So here is where I am. I wiped my phone & tried to install CM9 (cm-9.1.0-captivatemtd). I installed it on the SD card via my pc/USB, booted into recovery, tried to install & got error. So I tried again using speedmod kernal (speedmod-kernel-i897-k13e-500hz) & got same results. The I flashed the corn kernal (CornKernel_UCKK4_v705) & made 100% sure was rooted, tried again, error. So I read yet ANOTHER thread that said to flash ICS CM9 you need a compatible kernal. So I flashed Devil (Devil3_1.1.3_ICS_cappy_CFS_BLN_CMC_20120807). There were actually 2 & ZERO info as to which of the 2 you were supposed to use. Well after I flashed it I got stuck on a boot loop & could not get into recovery after that. So I tried flashing back to Corn, now I am just stuck at the boot screen. I can though boot into recovery still.
So now I have no idea what to do. I have spent my whole day trying to get this done. I tried & I failed. Apprently easy for some, not for others. Someone please help me!
When u first flash the CM9 Rom it should reboot into the CM9's recovery within a few seconds. Then from that recovery just select install the CM9 Rom and it will do the full install of that rom. Should be good after that.
And what error are u getting when u have tried the install and it failed ??
Sent from my SGH-I897 using xda premium
Thank the gods I got a response! First off thank you 4-2ndtwin for even taking the time.
OK so I am still on the Corn Kernal which uses "SystemsCorps CwM- Based Recovery v5.1.0.7". Using the 3 button I selected I did the following
- Install zip from SD card
- Choose zip from SD card
- selected "cm-9.1.0-captivatemtd.zip
- selected yes "Install cm-9.1.0-captivatemtd.zip"
Then it says finding updates.... then opening updates...
The error flashes on the screen so quick I cant even read it before it goes back to the select location for zip. I did it several times and I did see something that said "E:Can't open sd card...." , "bad!". I had to do it like 20 times to get that much from it.
I am lost. I have been looking high and low & cant seem to figure this out.
If you can't help no worries. I am starting to price out new phones but really dont want to. But if you can that would be awesome!
R u copying the rom onto ur internal sd card and not the removable sdcard ?
Maybe a bad download of the Rom...Try fresh download or even a different Rom.
Have u ever seen the "Encryption Unsuccessful" error on ur phone ?? -- it is the cause/result of the internal sdcard gettin messed up. But people with that error are able to flash Roms from their external sd.
Sent from my SGH-I897 using xda premium
i installed it via usb/pc to the main sd, dont have a removable installed. its in the same spot as the "update.zip" is located from the ota/kies upgrade. I checked and apparently I am dislexic. the file size was wrong. I cant get my phone to boot anymore though. gets stuck on the corn start up & never goes past it. I tried using the odin3 one click & now my phone no matter what I do says "firmware upgrade failed" "try using recovery mode". so now I cant do anything.
Sent from my ASUS Transformer Pad TF700T using xda app-developers app
*** Update ***
I finally got the Odin3 one click to work. I am now back to 2.1-update1, kernal is 2.6.29 [email protected] #2.
So I moved the CM9 zip file and verified 3 times the file size is correct.
So now do I just flash the kernal & then install from recovery or do I need to update to 2.3?
Im learning as I go, but damn its a painfull process! LOL
Shoktronic said:
Thank the gods I got a response! First off thank you 4-2ndtwin for even taking the time.
OK so I am still on the Corn Kernal which uses "SystemsCorps CwM- Based Recovery v5.1.0.7". Using the 3 button I selected I did the following
- Install zip from SD card
- Choose zip from SD card
- selected "cm-9.1.0-captivatemtd.zip
- selected yes "Install cm-9.1.0-captivatemtd.zip"
Then it says finding updates.... then opening updates...
The error flashes on the screen so quick I cant even read it before it goes back to the select location for zip. I did it several times and I did see something that said "E:Can't open sd card...." , "bad!". I had to do it like 20 times to get that much from it.
I am lost. I have been looking high and low & cant seem to figure this out.
If you can't help no worries. I am starting to price out new phones but really dont want to. But if you can that would be awesome!
Click to expand...
Click to collapse
This problem is solved simply by booting into recovery and flashing the zip a second time.
You can flash from 2.1, but I recommend you be on Gingerbread bootloaders.
Well I am on the 2nd update & then should hopefully be able to try it all again. After this update I am going to flash the new kernal, root & then try the update again.... hopefully!
Sent from my ASUS Transformer Pad TF700T using xda app-developers app

Categories

Resources