MTP Problems - Nexus 7 General

OK guys, really need help guys. I can't get MTP to even be detected on my HP Windows 7 64bit laptop. I have 2 Nexus 7's, one I accidentally dropped and the screen cracked and became unresponsive, or at least half of it.....but anyways it had no problems with the laptop actually detecting an MTP device was detected and installed the driver. Now with my new one, no matter what I do, it wont detect it. I called Google and had a 30 minute talk, but to no avail. Now, what really twists my leg is that when I plug it in to my HP Windows XP 32bit desktop, it detects it and installed it! So I'm so confused right now, if ANYONE has the answer to my troubles, please help!
Sent from my Nexus 7 using Tapatalk HD

"Now with my new one, no matter what I do, it wont detect it."
Can I guess that you haven't deleted the drivers that worked with your original N7? Rather than typing "Device Manager" instructions have a look at http://www.nirsoft.net/utils/usb_devices_view.html

i was having this problem as well. no pc would recognize the device was even plugged in.. although the nexus 7 would still change while plugged into pc. windows 7, xp, and linux... nothing. this is using the cable that came with my nexus 7. i don't think it's cut out for data. just for kicks i used a motorola droid 3 cable and bingo worked instantly.... hmmmmmmmmmm.

peterk-1 said:
"Now with my new one, no matter what I do, it wont detect it."
Can I guess that you haven't deleted the drivers that worked with your original N7? Rather than typing "Device Manager" instructions have a look at http://www.nirsoft.net/utils/usb_devices_view.html
Click to expand...
Click to collapse
Yes I have, as a matter of fact.
Sent from my Nexus 7 using Tapatalk HD

i finally got MTP to work on my Windows 7 by following these steps: http://www.nexus7tablethelp.com/2012/08/connect-nexus-7-to-windows-xpvista7.html.
i don't even know if the download was necessary, what i did was go to 'devices'. and unspecified Nexus 7 device was there. i right-clicked on it and selected 'troubleshoot', and within a minute it had an option to install the drivers.

usb cable that comes with nexus 7 is bunk.
it doesn't work for crap. it charges.. i've checked the pins to make sure clean, etc... i feel like i got only a charging cable for some reason. it won't charge other things though such as a droid 3 phone. but the droid 3 cable works for data without any special song or dance. i'm upset because the droid 3 belongs to my roommate and i don't have any other cable that will work. so lame asus. i have not been able to find a straight answer from anyone in months. same thing over and over again.. install drivers, blah blah blah go in the device manager upgrade driver try pdanet. none of this works if the hardware on the most basic level is not interfacing.

Related

ADB device offline

I've been using ADB the last couple of days to install apps on my Captivate and all of the sudden it stopped working today.
When I type 'adb devices' the phone comes up right away, but it shows offline.
I have tried reinstalling the drivers and Android SDK, but no luck. I've searched around and found some others with this issue, but haven't really found a fix that works for me.
Any idea why ADB would just stop working like that? I even performed a factory reset of the phone and put everything back to defaults.
Ok I almost pulled my hair out, but I found the problem.
For some reason, ADB does not work with the Samsung USB cable that came with the Captivate.
I switched to another USB cable and it works just fine.
Man, I really thought I was going crazy.
wimbet said:
For some reason, ADB does not work with the Samsung USB cable that came with the Captivate.
I switched to another USB cable and it works just fine.
Click to expand...
Click to collapse
What the hell is that about!? I wish all these companies would stop trying to break from standards by proprietizing common cables.
I can't get the drivers to work. Where did you get yours?
Ok I almost pulled my hair out, but I found the problem.
For some reason, ADB does not work with the Samsung USB cable that came with the Captivate.
I switched to another USB cable and it works just fine.
Man, I really thought I was going crazy.
Click to expand...
Click to collapse
Yeah I buy that, I couldn't even get the thing to try and connect at all with out switching usb connections on my computer.
stock cable works. I just rooted and ran into that problem. In order to get around it if you cant get a diff cable, make sure that b4 you connect your phone to your pc you turn off your internet so it doesnt auto dl the drivers. b4 u connect, dl the drivers for your phone from the root thread. Plug your phone into ur comp with the internet off and close any pop ups. Go to device manager look for the notification labled usb or captivateand right click and select update. Select search from file on disk or select file (something like that, i forget) and scroll and select the folder where you extracted the usb drivers. Make sure the checkbox that says search subfolders is checked and click next to install. two more drivers will pop up in device manager after u install the first one. Repeat the same procedure for both of them and then you should be able to use adb just fine to root.
Just wanted to further confirm that using a different microusb cable works! I keep reinstalling the drivers but it kept showing the device was offline. Then I tried my old Nokia N85 cable and it worked like charm! So weird how usb cables aren't made equally, unless Samsung designed the cable to prevent using adb?
I had this issue for a little while, but I installed the Samsung Kies software (which contains drivers) and uninstalled the ADB drivers I had originally downloaded. It's worked like a charm since then.
Go to SamsungApps.com and then use the canada site, as the software isn't really available in the US yet.
I have had no problems using the stock cable on my Laptop and work PC, both are Win 7 32bit. The same cannot be said for my my main home PC which is Win 7 64bit. Neither the stock cable nor an after market cable worked with ADB.
For the 32bit OSes I installed the Kies software and the usb device gets installed correctly. for the 64bit OS, I installed the Kies software but could get the phone to connect correctly. I then tried to install the 64bit drivers that are floating around the web. The 64 bit drivers worked enough to get the phone connected to the PC but when I tried to query "adb devices" the phone would always appear as offline. I've tried several things: install/uninstall drivers and software on the PC, restart the PC and Phone, change cables. Nothing seems to help on Win 7 64bit.
It seems to me that there might be a bug in the 64bit driver, though I have no proof of a bug.
I am going to keep playing with the 64bit OS until i figure it out or get so annoyed a that I just give up.
I'll be using my Win 7 32 bit laptop until I get the 64bit PC to work.
TimF said:
I have had no problems using the stock cable on my Laptop and work PC, both are Win 7 32bit. The same cannot be said for my my main home PC which is Win 7 64bit. Neither the stock cable nor an after market cable worked with ADB.
For the 32bit OSes I installed the Kies software and the usb device gets installed correctly. for the 64bit OS, I installed the Kies software but could get the phone to connect correctly. I then tried to install the 64bit drivers that are floating around the web. The 64 bit drivers worked enough to get the phone connected to the PC but when I tried to query "adb devices" the phone would always appear as offline. I've tried several things: install/uninstall drivers and software on the PC, restart the PC and Phone, change cables. Nothing seems to help on Win 7 64bit.
It seems to me that there might be a bug in the 64bit driver, though I have no proof of a bug.
I am going to keep playing with the 64bit OS until i figure it out or get so annoyed a that I just give up.
I'll be using my Win 7 32 bit laptop until I get the 64bit PC to work.
Click to expand...
Click to collapse
i've been able to install .apk's with my win7 64-bit ADB :O
all i did was install Samsung Kies.
i don't think i've ever had a problem...?
EDIT: i'm using the cable that came with it and no problems yet.
I'm running win 7 x64 and Kies did the trick for me. I haven't had a single issue connecting my phone since I did that.
Sent from my SAMSUNG-SGH-I897 using XDA App
Justa dding to the anecdotes.
I was having problems with the included cable using the front USB. It would show as Device Offline, also the charging wasn't very strong.
I switched to the onboard USB at the back of the case, and adb worked fine with the included cable.
Looks like I'll be picking up a couple extra USB cables so I won't have to continuously do the desk dive everytime I need to use it somewhere else.
1. I installed the kies drivers first and it would say offline when i checked the device through the cmd prompt.
2. I then installed the adb drivers and it then said the device was online.
3. i then rooted the phone and went on my way. i then tried it a second time and it said device offline.
4. nothing changed during this time except that i turned off debug mode, changed it to mass storage and plugged it back into the usb to transfer some files.
5. on returning to debug mode it no longer tells me the device is online. i have tried different USB ports as well.
6. i deleted the drivers, and reinstalled and it still says offline.
very frustrating.
wow. i forgot to try plugging it into another USB port. that worked. sorry about previous post.
I am running Windows 7 Home Premium 64bit on my laptop,
I installed the samsung 64bit drivers, it was an installer i found on the web, not the kies installer packaged driver one.
i changed my setting on my captivate to Mass Storage.
I mounted usb and everything works, by that I mean i was able to ADB like no tomorrow without any issues.
Then I made the mistake of installing Samsung Kies and that messed up my previous drivers and I wasnt able to ADB to my phone. I had to uninstall Samsung Kies and my phone still wasnt being found I still couldnt ADB.
my solution to fixing was restarted my phone and computer, without my phone connected to USB i re-installed the Samsung 64bit Driver Package, then hooked up my phone made sure Mass Storage was selected and Mounted USB and bam was able to ADB again.
hope this helps! also i have been doing videos helping people with issues with samsung's captivate on youtube, youtube.com/johnnyzappone if anyone wants to check em out, if anyone has any suggestions please let me know and id be happy to release a video!
I resolved my issues, I plugged the stock cable into one of the rear usb ports and the device is now available on my main PC Win 7 64 bit.
wimbet said:
Ok I almost pulled my hair out, but I found the problem.
For some reason, ADB does not work with the Samsung USB cable that came with the Captivate.
I switched to another USB cable and it works just fine.
Click to expand...
Click to collapse
Confirmed this made my device stop appearing as offline with adb.
How it is even possible that the cable prevents (only) adb access on the PC, I have no idea.
I have windows 7 and mac osx and I can use adb with both using the stock USB.
i have debugging active.
lol @ the samsung cable.
i've 2 indentic cables here, one doesn't work. plugged in the other one and this one works...
maby its just a strange issue on windows, next time try to pull out the cable and put in back in then connect your device again this should work.... :s
because earlier the cable just worked fine and now it doesn't.. so good luck xD
joelpt said:
Confirmed this made my device stop appearing as offline with adb.
How it is even possible that the cable prevents (only) adb access on the PC, I have no idea.
Click to expand...
Click to collapse
also can confirm PITA

My N1 and Windows 7(No connection while USB mode)

It seems that when I try to connect my n1 to my CPU, my CPU can not recognize my n1 SD card while its in USB mode.
I am currently running window 7 32b. I thought it was my windows that was faulty so reformat my CPU with fresh copy of windows. However that was not the case. So I tried my other computer running windows XP and it picks up the SD card instantly. So I tried a new SD card in my N1 tried it again. Didn't work. I am confused. Everytime I need to transfer files from my CPU to my n1 I have to pull out the SD card. Its strange. All the drives were installed correctly but it will not detect. Other CPU will detect. Is anyone having this issue with windows 7 on your computer. I wan to fix this. Its really getting annoying. Please if you guys have any ideas let me know. I even called HTC and they figured out its my CPU not the phone. And I agree. It works on other windows but not my windows 7.
Sent from my Nexus One using XDA App
Make sure usb debugging is checked marked before trying to mount....See if that works
Sent from my Nexus One using XDA App
USB debugging works fine. I am able to use adb commands. Funny thing is phone thinks its in USB mode. There's got to be some driver issue or something. Drivin me crazy.
Sent from my Nexus One using XDA App
If all else fails...get one of those WiFi file transfer apps. Way, Way, Way faster than transfering through the USB cord on the N1 (tops out at 2mbps).
SiNJiN76 said:
If all else fails...get one of those WiFi file transfer apps. Way, Way, Way faster than transfering through the USB cord on the N1 (tops out at 2mbps).
Click to expand...
Click to collapse
What's the app call? Yeah I can't find what's wrong. Spent three hours. This sucks.
Sent from my Nexus One using XDA App
Try Websharing. That's what I use.
Thx I will give it a try.
Sent from my Nexus One using XDA App
Try another PC. My Home PC that I built used to recognize it... then stopped... then wouldn't for weeks... and just the other day I noticed it found it (after a minute).
Today on my netbook (EeePC 1000HE) it gave me fits a few times before coming up.
Nothing really changed on my Home PC really and USB sticks would read just fine, but not my N1. I know I reset the thing many times without success so finding it working was surprising.
One thing I use are my existing mini-usb cables and I picked up these little mini-micro usb converters. Perhaps those are flaky?
cdtan99 said:
Try Websharing. That's what I use.
Click to expand...
Click to collapse
Yup, that's the one I use.
Pushed Here From My N1

[Q] PC wont detect Streak 7

Hey guys. So, i got my Dell Streak 7 last night from my uncle for a present...and ive spent all day getting apps and such. The problem is, i have noticed that if i plug my Streak 7 into my laptop, it doesnt detect anything. The Streak charges and a Is battery indicator app i have says its an AC instead of USB. If i cant connect my streak to my computer, i cant get all my music, pictures, etc onto there, or root it.
Is there a way i can fix this? ive tried on twodifferent laptops,so it isnt my computer that ismessed up.
It is a T-Mobile Dell Streak 7 running on 2.2.2 and is the 4G and wifi Device.
Thanks guys.
And also,i love everything ive seen on the site so far, and thanks for the answers to questions on my other devices!
Need more info.
OS of PC's? Have you installed the drivers?
oh right...i used a toshiba and hp...both on windows 7 home premium...i have installed the drivers but when i plug the tablet into the computer nothing pops up. it doesnt ask for the driver or say its installing one..my computer is acting like an outlet and therefore, i cant view files or even see that its plugged into the computer.I go to my computer and nothings there.
What ROM do you have?
I have the same problem, and worried about the lack of solution in this thread so far.
Is this a reported bug?
I'm using XP on an old Toshiba notebook.
aledelgado said:
I have the same problem, and worried about the lack of solution in this thread so far.
Is this a reported bug?
I'm using XP on an old Toshiba notebook.
Click to expand...
Click to collapse
Honeycomb does not support USB as a drive, that's why Win XP doesn't recognized the tablet when you plugged it in.
Im using Gingerbread 2.2.2, so does the same thing go for that as honeycomb? thanks
djspeziale3 said:
Im using Gingerbread 2.2.2, so does the same thing go for that as honeycomb? thanks
Click to expand...
Click to collapse
There is no way you are running Gingerbread, period. End of story.
Perhaps you have a Streak 5?
djspeziale3 said:
Im using Gingerbread 2.2.2, so does the same thing go for that as honeycomb? thanks
Click to expand...
Click to collapse
is it GB or Froyo because 2.2 is froyo and not GB, you are mixing conflicting information and as a result you wont be able to get the resolution you desire. have you tried using airdroid to transfer the files? you are capable of setting up an adhoc network with the win7 laptops then transmit the files to the streak once you have connected that to the adhoc network... dont be useless, go to the about phone/about tablet tab under settings, tell us the android version and the model number, even OEM version
I have a similar issue i bought 2 dell streak 7s i rooted first just fine took a few youtube clips and alot of reading... Like i said first tablet rooted running great, i plug in second tablet to begin its root process and i get an error dont recall exact message something about over voltage on usb port, then the computer rebooted, restarted plugged in again no message but wouldnt see streak, plugged back rooted one computer sees it, unplugged put nonrooted one in went threw this 5 times trying diffrent usb ports and a diffrent usb cable just wouldnt see tablet since inital usb overvolt.... It charges just fine on wall but does nothing on pc.... I think i got 1 lemon....
Sent from my PG86100 using Tapatalk 2

[Q] windows will not recognize touchpad

I am not sure when this started. I have used windows to install cymod several times but i went to download a update and install it and my computer will not recognize the touchpad. it says the device driver was not installed properly
i have tried on two different units.
one has web os only and the other has android
it goes through the steps of looking for the device and then nothing.
i get a tone on the touchpad and then nothing on the computer
I do have the correct setting in the storage settings so i have no idea what to do
did you run novacom again?
x000x said:
did you run novacom again?
Click to expand...
Click to collapse
no i didnt see a point because Windows wont find the touchpad in explorer
Now i forgot to mention this was a fresh windows install too
dyson77 said:
I am not sure when this started. I have used windows to install cymod several times but i went to download a update and install it and my computer will not recognize the touchpad. it says the device driver was not installed properly
i have tried on two different units.
one has web os only and the other has android
it goes through the steps of looking for the device and then nothing.
i get a tone on the touchpad and then nothing on the computer
I do have the correct setting in the storage settings so i have no idea what to do
Click to expand...
Click to collapse
It sounds like driver problem to me. Search for HP touchpad driver and download and install the latest version you find, that should do it.. I'm assuming you have the MTP box checked in storage > settings > USB computer connection. Also, reboot both the tablet and the computer after installing the new driver.
Good luck.
I have two different devices one only has web os and the other has android.
on the android I have the MTp checked and have accessed it in the past but i upgraded to windows 8
that being said i had the same issue with windows 7 i just thought a fresh install would fix the issue and it has not
I have downloaded what i thought was teh latest drivers.
I have installed novacom
and rebooted my system.
and I get the same error message Windows does not recognize the device.
i get the connected tone on my computer but I don't get any response on the touchpads
did you put the tablet in usb mode?
i did on the android not on touchpad forgot how to honestly
dyson77 said:
i did on the android not on touchpad forgot how to honestly
Click to expand...
Click to collapse
In webos when you plug in the USB it will come up with a prompt. Remember to safely eject before disconnecting.
sstar said:
In webos when you plug in the USB it will come up with a prompt. Remember to safely eject before disconnecting.
Click to expand...
Click to collapse
it doesn't do anything when i plug in the usb. i get the tone on the computer but nothing on the touch-pad at all
i ried through the usb ports on the computer and the ones on the case just to be sure
dyson77 said:
it doesn't do anything when i plug in the usb. i get the tone on the computer but nothing on the touch-pad at all
i ried through the usb ports on the computer and the ones on the case just to be sure
Click to expand...
Click to collapse
Try using a different USB lead and plugging into different USB sockets on your PC sometimes I find my PC will recognize it with one socket but not another same thing occasionally happens with my USB sticks. Otherwise I would suggest trying a different PC if you still have a problem that would suggest a fault with the USB socket on your touchpad which I have had to have replaced once.
Fingers crossed that isn't your problem.
dyson77 said:
i did on the android not on touchpad forgot how to honestly
Click to expand...
Click to collapse
This will let TP be recognized on the PC
"If you want to transfer files back and forth from the CM9 touchpad you might have difficulty figuring out how exactly to do it.Here's how you pull it off:
First, tap on your app drawer in the top right of the screen (the little checkerboard). Now, select the "settings" icon.
Now tap on storage on the left-hand pane.
Finally, the tricky part - tap on the 3 squares at the VERY top right of your screen. It will bring down a little drop-down menu for USB computer connection. Tap it and put a checkmark in the "Media Device MTP" box.
Now you can plug your touchpad into the computer at will and transfer files back and forth from it. Easy as pie, I'm not sure why this isn't activated by default, but it's a simple fix if you know what to do."
Sorry I copied this from XDA a couple of weeks ago, so I can not take credit for this but it works great
that is already done on my android, and the touch-pad should auto connect. but neither are it says device not recognized
dyson77 said:
that is already done on my android, and the touch-pad should auto connect. but neither are it says device not recognized
Click to expand...
Click to collapse
Did you check my second suggestion/try it on another PC to find out whether you have a faulty USB socket on your Touchpad as they can go wrong?
yes i did and i tried 4 usb ports, but that would be rather unusual for it to go bad on two devices right?
dyson77 said:
yes i did and i tried 4 usb ports, but that would be rather unusual for it to go bad on two devices right?
Click to expand...
Click to collapse
i also just tried it on my galaxy s3 using a usb port and it gave me the same unknown device error
im not sure i read that you put TP into usb mode from webos..if not, google the how to.. really simple..
also, install the novacom again.. iirc, it has the drivers too
to me, this screams missing drivers for both devices.
it wouldnt hurt to go to youtube and watch some reverendkjr vids
amkaos said:
im not sure i read that you put TP into usb mode from webos..if not, google the how to.. really simple..
also, install the novacom again.. iirc, it has the drivers too
to me, this screams missing drivers for both devices.
it wouldnt hurt to go to youtube and watch some reverendkjr vids
Click to expand...
Click to collapse
Novacom shouldn't make a difference, I have just installed windows 8 on my laptop and haven't installed anything yet , just plugged in the Touchpad and it was recognized straight away
Sounds like either windows is messed up or the USB connector of the Touchpad has gone .
same error on TP + his galaxy??
dam the luck..busted ports on both devices at the same time..
right after a fresh format of windows ; what a coinkadink
if on your very longest shot that win needs new drivers, the palm / novacom etc
process installs them and TP will get recognized and picked up..
he said he does not know how to root his TP to put into usb mode..
i know from recent experience that even when android is in mtp mode, my PC would not connect play w/ it until i had new drivers..
same experience w/ my new nexus 7 during the process of rooting it..
amkaos said:
same error on TP + his galaxy??
dam the luck..busted ports on both devices at the same time..
right after a fresh format of windows ; what a coinkadink
if on your very longest shot that win needs new drivers, the palm / novacom etc
process installs them and TP will get recognized and picked up..
he said he does not know how to root his TP to put into usb mode..
i know from recent experience that even when android is in mtp mode, my PC would not connect play w/ it until i had new drivers..
same experience w/ my new nexus 7 during the process of rooting it..
Click to expand...
Click to collapse
Ok lets get a few things right
I do know how to root my device I did it a while ago and honestly haven't done it in a while so I am rusty
but that being said if you cant access the device at all even in usb mode then you cant root.
And yes now my galaxy s3 wont recognize either.
every time i try it tells me that there was a device error and windows doesn't recognize the device.
i formatted the cpu again and put windows 7 and no help
I have tried two diffrent touchpads one android and one web os
and my phone
to get things right you have to start at the beginning. Windows will not recognize TP w/o the drivers first. It's obvious you have been avoiding that step. you need to go back and do the whole nova com thing to install them before you attach TP to it.. look at the you tube videos. you will be finished in a few minutes. .

Note 3 won't connect to PC, Kies 3 installed and everything

So I've run into a weird issue that was happening with my Atrix HD the last few days of its life too and now over to the note on my laptop.
I know this is probably a more computer specific problem, as it's recognized on my desktop but I'm running outta ideas here so maybe someone can help?
I've been flashing and rooting and all that jazz since android was released so I know how to work it and my thinkpad was accepting mtp/android connections as recently as september. I unlocked my Atrix HD bootloader and all that but couldn't get the phone to accept the twrp so eventually I just gave up because it was just a stop gap phone.
But now with my new Note 3, I can plug the phone to the laptop and it'll charge but it doesn't bring up the MTP notification (all my androids do this now)
I've checked device manager, it's not even an unknown device in the list..so weird.
Anyone run into this issue before? I know it's not really phone specific but yeah.
thanks in advance
Are you using it on a USB 3.0 port? My home pc only recognizes mine if it's plugged into USB 2.0. Fought this same fight last night myself. Good luck.
Sent from my SAMSUNG-SM-N900A using Tapatalk 4
Do you guys have BC 1.1 enabled on your machines? If so that's why the 3.0 port doesn't work.
Sent from my SAMSUNG-SM-N900A using Tapatalk 5
to both of you, my thinkpad (for some awful reason) doesn't have usb 3.0, so no there isn't any USB 3.0 issues.
Literally plug it into my laptop, and nothing. no response from the computer at all not even in device manager, just starts charging as if the phone was plugged into a low voltage socket or something.
baffling.
works absolutely fine on my desktop, but I don't have all my adb and sdk tools set up the way I like them on there.
I have no idea.
ERR edit that it just started working :/ weirdd
Verizon note 3 here - same issue.
Do you guys have any programs that's suppose to charge devices faster with usb? It has to be software related on your laptop
Sent from my SAMSUNG-SM-N900A using Tapatalk 5
To everyone with this problem, you have to specifically download the Note 3 drivers from Samsung
samsung.com/us/support/owners/product/SM-N900VZWEVZW
I was having the same problem, but now both Kies and manual usb file transfer work perfectly on Windows 8
I have same problem here as well ?? its not reconizing my phone in usb 3.0 and i have the newest drives as well for note 3 gn 9005
got it working
Had the same problem after trading in handset,maybe there is some kind of hardware identifier messing things up for usb?
I removed (uninstalled and deleted) drivers for usb, including for hub then reinstall hub drivers followed by reinstall driver option in Kies3 to install samsung drivers. This got everything working.
Panikos said:
Had the same problem after trading in handset,maybe there is some kind of hardware identifier messing things up for usb?
I removed (uninstalled and deleted) drivers for usb, including for hub then reinstall hub drivers followed by reinstall driver option in Kies3 to install samsung drivers. This got everything working.
Click to expand...
Click to collapse
I disable fast usb 3.0 charging in the BIOS..Now it works.
---------- Post added at 05:52 AM ---------- Previous post was at 05:51 AM ----------
pachi72 said:
I disable fast usb 3.0 charging in the BIOS..Now it works.
Click to expand...
Click to collapse
PEOPLE DISABLE FAST 3.0 USB CHARGING IN YOUR MOBO BIOS..IT WORKS FOR ME NOW>:highfive:
NOOOO its easy! thats too much work. All you have to do is dial *#0808# and click mtb+adb and that should solve the problem for everyone. If that doesn't click on something else lol but thats what I did.
Hope this helps someone :good:
Android3220 said:
NOOOO its easy! thats too much work. All you have to do is dial *#0808# and click mtb+adb and that should solve the problem for everyone. If that doesn't click on something else lol but thats what I did.
Hope this helps someone :good:
Click to expand...
Click to collapse
Your going to mess your phone up some kind of bad playing with those settings if you don't know what your doing. Also please don't recommend doing any of that without a trustworthy source because you can cause another person to mess up their phone as well.
The Note 3 does NOT support BC 1.1. That's what "Fast Charge" or whatever they call it is. Your phone will not use that connection so there is no workaround, just disable the BC 1.1 function.
Agent said:
Your going to mess your phone up some kind of bad playing with those settings if you don't know what your doing. Also please don't recommend doing any of that without a trustworthy source because you can cause another person to mess up their phone as well.
The Note 3 does NOT support BC 1.1. That's what "Fast Charge" or whatever they call it is. Your phone will not use that connection so there is no workaround, just disable the BC 1.1 function.
Click to expand...
Click to collapse
Yes I stand corrected however I always mess with these settings in order to unlock 90% of the gsm galaxy lineup. This is just a different way of mounting your phone to the computer at least that is what I was told and have been doing for a while. I have tried all the methods on the note 3 and so far no problem. I have been using my phone like this for a while without any hiccups and I had this usb problem since day one on my SAMSUNG laptop so I tried this method which worked. You can easily switch back to the same setting but once again you might be right about the messing up your phone part. FYI MTP just stands for media trasnfer protocal I think so I went with it after a little research.
Just letting everyone know what worked for me no harm done
Android3220 said:
Yes I stand corrected however I always mess with these settings in order to unlock 90% of the gsm galaxy lineup. This is just a different way of mounting your phone to the computer at least that is what I was told and have been doing for a while. I have tried all the methods on the note 3 and so far no problem. I have been using my phone like this for a while without any hiccups and I had this usb problem since day one on my SAMSUNG laptop so I tried this method which worked. You can easily switch back to the same setting but once again you might be right about the messing up your phone part. FYI MTP just stands for media trasnfer protocal I think so I went with it after a little research.
Just letting everyone know what worked for me no harm done
Click to expand...
Click to collapse
I tried installing the drivers from samsung with no luck and then tried this and no luck either. GOD DAMNIT! Why is google making it harder and harder to do this ****? Why can't it be as simple as moving files to another other usb drive like it used to be.
IT works!!it actually works..
what i did was,,download kies 3,supported kies for note 3, and go to Tools tab, and see the option "reinstall device driver" dont unplug your note 3,,and voila!!just wait a while, and see how the kies recognize ur note 3..:laugh:
Android3220 method works for me using Note 3, Windows and Kies. Thank ypu.
Panikos said:
Had the same problem after trading in handset,maybe there is some kind of hardware identifier messing things up for usb?
I removed (uninstalled and deleted) drivers for usb, including for hub then reinstall hub drivers followed by reinstall driver option in Kies3 to install samsung drivers. This got everything working.
Click to expand...
Click to collapse
Do you plug it in USB port 3.0 or in 2.0? Mine, either port are not working
Try using a USB hub,,, 2.0 or 3.0.... this will work......
Go to device manager then to USB find the Samsung driver uninstall. Plug your note 3 in then your system will see your note 3 and reinstall your drivers. Then your good to go.
Sent from my SAMSUNG-SM-N900A using xda app-developers app
Pullback said:
Do you plug it in USB port 3.0 or in 2.0? Mine, either port are not working
Click to expand...
Click to collapse
From what I remember I had tried both and neither worked before re-installing as described

Categories

Resources