Related
I've read the thread over on the Euro HD2 part of the site, but there's little said about car & bike mounts that fit the TMOUSA HD2's. I'm especially interested in mounts that can charge while using GPS/Sat Nav (evidently some charges don't provide enough output). Any recommendations?
koz said:
I've read the thread over on the Euro HD2 part of the site, but there's little said about car & bike mounts that fit the TMOUSA HD2's. I'm especially interested in mounts that can charge while using GPS/Sat Nav (evidently some charges don't provide enough output). Any recommendations?
Click to expand...
Click to collapse
Well it's not any use for bikes, but brodit makes the best car mounts I've ever used, and you can order them with or without a power connection built-in. The one I used with my wizard charged it even faster than a wall charger. They also will let you flip the phone from portrait to landscape (and back) as needed.
www.proclipusa.com
sirphunkee - thanks for the info on the Brodit adapters. I was looking at both the Brodit adapters and the Herbert Richter mounts (not a fan of the vent mounts) from http://www.pdahut.com/store/home.php?cat=2717 . The one nice thing I can see from their stuff is that you could have a Herbert Richter car mount and bike mount and use the same Brodit adapter for both. Anyone using any others with success?
sirphunkee said:
Well it's not any use for bikes, but brodit makes the best car mounts I've ever used, and you can order them with or without a power connection built-in. The one I used with my wizard charged it even faster than a wall charger. They also will let you flip the phone from portrait to landscape (and back) as needed.
www.proclipusa.com
Click to expand...
Click to collapse
Actually Brodit/ProClip does make a mount for bikes... Brodit Bike Mount. I don't own the bike mount myself but I can definitely vouch for their car mounts, I've used them for my last two devices and now presently for my HD2.
Nice! I just ordered my ProClip Auto Mount for the HD2 (USA). This is more money than I wanted to spend, but it looks like a great solution and I really like where it will mount to my dash.
Again, Great forums, and great site.
Two thumbs up for ProClip
I don't want to sound like an advertisement, but wow, the ProClip is a spectacular car mounting system. Good quality mount, that works very well. It was more money than I wanted to part with, but I am satisfied.
I didn't think about the fact that I will have to ditch the rubber glove the HD2 comes with. I suppose I better invest in a clear shield solution and a belt clip case like the RIMs used to come in.
smileybri said:
I didn't think about the fact that I will have to ditch the rubber glove the HD2 comes with. I suppose I better invest in a clear shield solution and a belt clip case like the RIMs used to come in.
Click to expand...
Click to collapse
If you're referring to using a clear shield while it's in the proclip car mount then it wont work. The clear shield will make it to big and not fit properly in the mount...I tried the same thing a couple devices ago.
try www.bracketron.com. They have just about everything I could think of, and decent prices. I love my universal usb charger.
Also, if you wish to get the bike mount, looks like all of the brackets, waterproof cases, etc have universal slots on the back to fit any type of mount.
Pandemoniumone said:
If you're referring to using a clear shield while it's in the proclip car mount then it wont work. The clear shield will make it to big and not fit properly in the mount...I tried the same thing a couple devices ago.
Click to expand...
Click to collapse
Good tip. Darn! Well I guess I will have to just use it bare. I really wish the HD2 had a finish like the original HTC Dash for T-Mobile. It was a slight rubbery texture that didn't slide at all. These slick finishes lead to drops and falls.
Bicycle Mount
I just bought this from Amazon and used it today. Did 15 miles and it was awesome. I use a GPS app and listen to my music via bluetooth headphones and it was nice not to have to put my phone in my pouch.
http://www.amazon.com/gp/product/B002LSHOTE/ref=oss_product
Here's an interesting and inexepnsive alternative that I just ordered. Will let you know how it is when I receive it.
The best car mount?
Anybody use this from Brodit? I am just about to buy one...
http://www.proclipusa.com/applicati...s/513086.aspx&processor=page&categoryid=17987
I have used Brodit stuff in the past and I am crazy about their products. Every now and then they have one that does not fit exactly properly, however I believe this one should work well - for the US T-Moboe version.... anybody have this?
KruseLudsMobile said:
Anybody use this from Brodit? I am just about to buy one...
http://www.proclipusa.com/applicati...s/513086.aspx&processor=page&categoryid=17987
I have used Brodit stuff in the past and I am crazy about their products. Every now and then they have one that does not fit exactly properly, however I believe this one should work well - for the US T-Moboe version.... anybody have this?
Click to expand...
Click to collapse
On the first page of this thread there are many posts of users (including myself) who've made this purchase and love it. You can't go wrong with this mount, the best I've used to date.
is there a way i can use the pro clip and still maintain use of the micro usb slot? I have a carputer and i tether the hd2 to my PC, so I would need to be able to access the micro USB port to connect a usb cable to the pc
jmejia15 said:
is there a way i can use the pro clip and still maintain use of the micro usb slot? I have a carputer and i tether the hd2 to my PC, so I would need to be able to access the micro USB port to connect a usb cable to the pc
Click to expand...
Click to collapse
Yes, the usb slot is always accessable with pro clip mounts. The need to be able to charge the device while in the mount is crucial.
Actually, the proclips are available with and without a built-in charger...so if you want to keep the port free, just be sure to order the one that doesn't have the charger cord/plug attached.
I wanted to share this link from Lifehacker with anybody interested in getting a car mount for their HD2 but not wanting to spending $25+ plus.
http://lifehacker.com/5593245/build-a-custom-phone-car-mount-for-under-10
I tried this out but substituted a dash mount for a windshield mount. I got a cheap hardcover case and the universal Garmin mount from eBay. Both items were less than $3 and I got them with free shipping. I also had to buy some super glue since I didn't have any, I just got a small tube of it for $1.50 from Target.
It's worked like a charm so far. I will say that the case I got is a bit tight so my phone doesn't pop out of the mount as easily as the example shown.
Cheers!
Looks like the custom ones are starting to appear not a bad Price at £15.99
http://cgi.ebay.co.uk/FLEXIBLE-SUCT...K_AudioTVElectronics_PDAAccessories_PDAMounts
And £13.99 for the Vent kit
http://cgi.ebay.co.uk/SWIVEL-CAR-AI...K_AudioTVElectronics_PDAAccessories_PDAMounts
Hmm, Pre-order and the pictures are faked (charging lead plugging in the left hand side?). Best wait till after their September due date and check again, it looks like it will be a nice solution if it arrives.
I bought a universal car dock from ebay and whilst the phone fits (kind of) the streak is just so damn heavy it shakes about A LOT. It's usable, but very irritating.
Not sure what these 2 will be like though, but watch out for shaking
saving seller for future use.
Now they are on i am sure their will be more to follow ie China
ah, the chinese. good food, attractive women, cheaply made, cheaply priced inferior products we just cant resist. gotta love em
Yep that is all True and Yep We never Learn and we BUY BUY BUY dont we just love em
Considering the car docking kit from Dell is perfect, I don't see why anyone would consider a third party car station.
Muo said:
Considering the car docking kit from Dell is perfect, I don't see why anyone would consider a third party car station.
Click to expand...
Click to collapse
Sure... aside from the over-inflated price. I bought mine from a local Wireless Wave here in Toronto and it works just as well for $20 taxes in.
Dell car kit far from perfect
I bought the car kit from Dell, and no matter whether the device is hanging from the windshield or off the dash, the Streak bounces around like mad when I am driving. My car is nowhere NEAR that bad - it is a heavy device and an awkward mount.
I just ordered a GPS t-mount from ProClip that might work well. I will take the sleeve the Streak sits in on the gooseneck and mount that on the ProClip mount, then attach that to the vehicle mount made for my car. That should lock the device down.
It's an expensive solution, but I spend about an hour each way commuting daily, so it is really a necessity for me. My mount should be here on Wednesday, and if anyone is interested I will write it up and post a picture or two if it works.
pictures would be awesome.
Do you see anyway to have the adapter attached (jerry-rigged) to the mount so that it plugs in when you insert the Streak?
I am looking for a way, as plugging the cable in is extremely tempermental, and a pain, to be honest!!
I suppose you could do something on the bottom of the Dell sleeve to hold the cable. I will have my cable secured on the console and the mount, so it is no problem for me to plug it in the bottom of the phone when I put it in the stand.
The mount comes in tomorrow. Can't wait. Had to slam on the brakes on the way home today and it looked like my phone was on the business end of a trebuchet...
cue_32 said:
Sure... aside from the over-inflated price. I bought mine from a local Wireless Wave here in Toronto and it works just as well for $20 taxes in.
Click to expand...
Click to collapse
In the US it is only 39.99.... not too expensive if you ask me. Plus this car docking kit really is perfect for the Streak. The sides are flexible rubber that hold the Streak and on the back there are rubber pads so absolutely no plastic is touching the Streak resulting in no scratches. Plus you get a a cable with it.
Perfection is worth the 40 bucks. Although I would love to see images of the one you purchased and seem pleased with.
I have the Dell car kit and I like it. It seems reasonably priced at $40 since it comes with a cigar lighter-USB adapter and USB cable as separate items. One can never have too many charging cables or options. The mount does jiggle a bit however this can be cured by positioning the mount so the cradle rests on top of the dash rather than suspended in mid-air.
Sent from my Dell Streak using XDA App
I'm looking to use the dell case inners for a car holder. I have some garmin mounts that will allow me to fix to the dash.
The issue with the ones from ebay (original post) the holding part is covering the power pdmi connector.
Sent from my Dell Streak using XDA App
Anyone thinking of making their own car mount should make clearance for the camera lens so it can be used as a dash-cam. Dell did not do this and it would require some cutting on their kit.
Sent from my Dell Streak using XDA App
I acutally brought one of these:
http://www.mobilefun.co.uk/clingo-universal-in-car-holder-p25398.htm
The arm is solid but since it still sticks out a fair bit and the phone is kinda heavy, it does bounce a little (nothing compared to the flexi arms you find on most other phone holders). And since the Dell has a flat back, it sticks pretty well too (though I have had it drop once but I think that was cos my brother didn't put it on properly and due to the weight, it slowly peeled itself off). The pad only covers a small area of the back of the phone so you can use the camera, and there's also no clamps that would obscure the charging port or the buttons on top.
If the docking station was cheaper, I'd seriously consider getting another one for the car, that way I can easily put it on and take it off with super easy and I can leave the cable plugged in and just tuck it away (saves so much time when I do multiple deliveries and stuff).
da_ferreira said:
I bought the car kit from Dell, and no matter whether the device is hanging from the windshield or off the dash, the Streak bounces around like mad when I am driving. My car is nowhere NEAR that bad - it is a heavy device and an awkward mount.
I just ordered a GPS t-mount from ProClip that might work well. I will take the sleeve the Streak sits in on the gooseneck and mount that on the ProClip mount, then attach that to the vehicle mount made for my car. That should lock the device down.
It's an expensive solution, but I spend about an hour each way commuting daily, so it is really a necessity for me. My mount should be here on Wednesday, and if anyone is interested I will write it up and post a picture or two if it works.
Click to expand...
Click to collapse
which t clip did you get i use brodit mounts all the time and am just about to buy a streak .... am gonna get the car kit cos there is £25 off it when you buy both from dell direct .... but i hate mounts that sit on the window ..... so the t clip sounds good solution ,.,, which one did you buy and where from ???
ta
I've seen the Dell car mount kit, and it seems to have a snugg fit to the dell.
my question is... can you use it with a case over the Dell, something like the form fit case from Dell.
Keethos said:
I acutally brought one of these:
link: mobileFun
How good is it really? does it pad really grip the device. I'ts an interesting concept, but does it hold onto the Dell through a long journey.
would you recommned it?
thanks
Click to expand...
Click to collapse
Has any one tried this mount with the nexus 7?
Samsung Galaxy Tab 7.0 (P3100) - Holder with Tilt Swivel
Item #: 511381
thanks
No, but I've emailed them. They said they are still waiting to receive their Nexus. Then they would probably have a 3-5 week period before they'd be available for order.
can we get a link PLEASEEEEEEEEEEEE
THANKS in advance
Here's a link to the one in question. I believe they also have one for the kindle fire. I'm sure one technically works based on size, but I'll wait for the actual Nexus one to be released.
http://www.proclipusa.com/store/products/holder-with-tilt-swivel-511381.aspx
Then you need the vehicle mount of your choice for your specific vehicle.
I have the iPad version of that mount and it's excellent albeit a bit pricey.
How do you mount it? Screw it on to the dash?
if you click the link above, you should see vehicle mounts.
They make different mounts for each car. Typically without the use of even double sided tape. Definitely no screwing to the dash.
The device mount, bolts to the vehicle mount. The vehicle mount is attached to your specific vehicle. Nothing permanent.
For my car for example, there are two mounts that use no tools at all, and one that uses double sided tape.
I bought a ProClip mount for my phone (Galaxy S II) and was unimpressed to find that it lightly clipped into the dash of my car, but was mostly held on with adhesive tape. On hot days, the tape basically melts and the mount stays lightly clipped in, but sags and moves around. Not the "perfect sturdy mounting solution" that was advertised.
I emailed support and their answer to me (paraphrased) was "well we've sold a hundred of these without issue, so we can't do anything for you".
Oh great, I feel like a moron for spending $85 on a phone mount. So, word of warning, depending on what car you drive and what type of mount you order, it might sag under the weight of the Nexus 7.
brahmy said:
I bought a ProClip mount for my phone (Galaxy S II) and was unimpressed to find that it lightly clipped into the dash of my car, but was mostly held on with adhesive tape. On hot days, the tape basically melts and the mount stays lightly clipped in, but sags and moves around. Not the "perfect sturdy mounting solution" that was advertised.
I emailed support and their answer to me (paraphrased) was "well we've sold a hundred of these without issue, so we can't do anything for you".
Oh great, I feel like a moron for spending $85 on a phone mount. So, word of warning, depending on what car you drive and what type of mount you order, it might sag under the weight of the Nexus 7.
Click to expand...
Click to collapse
I love their holders (made by Brodit) but the dash adapters are weak.
I use a dash adapter from panavise. It is made of steel. The bolt patterns match those used by Proclip/Brodit. Works great.
I wish Brodit/Proclip would support the pogo pins and what-not.
I might try this out here soon, been wanting to do a full in dash install or radio replacement for the Nexus 7 but can't find anything for that.
I want something that can adjust both up and down and left to right. I saw the SCS-270 for Verizon but I have the Sprint version of the LG G2. I know the Verizon size is a bit bigger because of the wireless charging so will the SCS-270 work on Sprint?
UPDATE: I went with this one and it is AMAZING! Extremely sturdy and a perfect fit! $10 shipped!
http://www.ebay.com/itm/Car-Windshield-Mobile-Phone-Long-Mount-Holder-Fit-LG-G2-D802-D802TA-D803-VS980-/121233657494
I'm not sure if the fits your needs ideal, but I have been using it and couldn't be happier. It's stable, sturdy, and simple. It fits my G2 with a fat case on it and also my girlfriends old iPhone and current HTC one. I recommend it.
iOttie HLCRIO102 One Touch Windshield Dashboard Universal Car Mount...
The iOttie is perfect for the G2. I use the flex 2.
Sent from my LG-D800 using XDA Premium 4 mobile app
I use this one, it is very easy to put the phone in the mount but be aware if you have a bigger case it may not fit well.
I had to cut the spring down a little and stretch it because it was too tight for my liking and I use a thin Nillkin case (very nice btw).
I do really like it though because it is so easy to put in the mount. :good:
Thanks everyone for your suggestions. I found some on eBay that are custom fit for only $10 shipped. I'll post the results when it arrives.
Not trying to hijack your thread, but anyone have a suggestion for a good car mount that clips to your car's air vents?
beezar said:
Not trying to hijack your thread, but anyone have a suggestion for a good car mount that clips to your car's air vents?
Click to expand...
Click to collapse
Check out this seller. I will have mine on Saturday so I can't speak for the quality till then but these are exact fits, cheap and shipped from the US.
http://www.ebay.com/sch/m.html?_odkw=&_osacat=0&_armrs=1&_ssn=urmarketoutlet&_trksid=p2046732.m570.l1313.TR12.TRC2.A0.H0.Xlg+g2&_nkw=lg+g2&_sacat=0&_from=R40
Keep watch on slickdeals.net for the iOttie. It's meant for iPhones, but my phone fits fine. ~$10 is a good price for it.
Like other mounts, it secures the phone confidently, but I chose the iOttie because it has a very sticky suction cup. I've got a leather dash, with tons of little ridges and bumps, and my mount has adhered without dislodging for the last month. It's doesn't use a glue-like adhesive. You can reuse it if you run the cup under warm water, and it sticks like new.
They make the iOttie in XL, but it's a few bucks more.
Just hit up Amazon for reviews and pics.
Just my 2 cents... If you have a case on the phone... The best thing I've found is the imagnet mount on amazon.
http://www.amazon.com/gp/aw/d/B008IOQ3K6/ref=mp_s_a_1_1?qid=1392972564&sr=8-1
Hope u like
Sent from my g2 using xda app-developers app
I'm confused. Why wouldn't you use this one? I have it and it's great, plus it puts the phone into car mode.
http://www.amazon.com/LG-Electonics...8&qid=1392978566&sr=8-2&keywords=g2+car+mount
I gave up getting phone specific car mounts. My Epic 4G custom mount was useless with my EVO 4G. So I got a custom EVO 4G car mount. Wich was useless when I switched to Verizon and got a Bionic with the custom car mount. All so I could put the phone into car mode. When I got the G2 I said screw a custom car mount. Bought the iOttie flex 2 and and Damn happy with it. The iOttie flex 3 is even better. No it doesn't put my G2 into car mode. But I'm over it. Just got a lumia 1520 and it fits my flex 2 just fine. That's just my opinion after 15+ phones over 15 years
Sent from my LG-D800 using XDA Premium 4 mobile app
scottysize said:
I'm confused. Why wouldn't you use this one? I have it and it's great, plus it puts the phone into car mode.
http://www.amazon.com/LG-Electonics...8&qid=1392978566&sr=8-2&keywords=g2+car+mount
Click to expand...
Click to collapse
Does Sprint have car mode?
scottysize said:
I'm confused. Why wouldn't you use this one? I have it and it's great, plus it puts the phone into car mode.
http://www.amazon.com/LG-Electonics...8&qid=1392978566&sr=8-2&keywords=g2+car+mount
Click to expand...
Click to collapse
Does this mount fit non-Verizon variants?
No idea if none VZW G2's fit in the VZW Car mount. I guess you could always go to your local VZW store and ask to try out the car mount.
I orded this Mountek nGroove CD slot mount off Amazon and I love it. My dashboard mounts always fall off, especially harrowing on a long road trip (not to mention, potentially damaging my phone). But I'm very happy with this slot mount. You put it in your CD slot (and yes, you can have a CD in there), tighten the wing so it keeps the slot inserted tightly, place the phone in the mount, and close the arms. It's secure and easy for me to see. It blocks my Sonata's clock, so if I need the time, I have to look at the tiny print on my phone.
This is the link to the mount on their official site: http://www.mountek.com/shop/cell-ph...al-cd-slot-mount-cell-phones-and-gps-devices/
Virus Vice Car Cradle
I ordered such holder in the machine. The cover shouldn't be removed (any thickness).
Virus Vice Car Cradle Mount Holder Stand Kit for Smart Phone iPhone 4/4S/5
I ordered on ebay.
in dx . com a lot car mount
The Arkon mount is quite durable and fits the G2...
http://www.amazon.com/Arkon-Windshi...&ie=UTF8&qid=1398944221&sr=1-1&keywords=arkon
I purchased the Mountek Snap so I could mount any device. The magnet is thin enough to fit inside the case when you snap off the back.
I use the LG wireless charging car dock. Verizon though, I guess it would be useless if you don't have wireless charger.
Sent from my VS980 4G using Tapatalk