Related
Has anyone already tried to build cyanmobile from source?I would try but squadzone is constantly updating his github so i should compile in the night...
and the meaning of the thread
dheeraj (dhlalit11) said:
and the meaning of the thread
Click to expand...
Click to collapse
The latest release had some problems for me so if someone had already compiled it i wanted to know his impressions before starting...:angel:
Hi guys...I've just built cyanmobile from source...I created on otapackage with the associated command...I'm waiting for someone wiser than me who could stop me worrying about possible bricks...As far as i know, having chosen the right repos, if something would go wrong, it wouldn't just boot...Am i right???...Waiting for your replies...
EDIT: Installed but not booting...Trying to compile again...
Recompiled and not booting again...I have a doubt: if i git clone the device configuration, do i have to extract also proprietary files?(i think not but i'm new on this so there could be differences)...Thanks for your help...
Asbusto said:
Recompiled and not booting again...I have a doubt: if i git clone the device configuration, do i have to extract also proprietary files?(i think not but i'm new on this so there could be differences)...Thanks for your help...
Click to expand...
Click to collapse
ask squadzone
Messi10 said:
ask squadzone
Click to expand...
Click to collapse
I finally made it...new ui is awesome!!!
Asbusto said:
Has anyone already tried to build cyanmobile from source?I would try but squadzone is constantly updating his github so i should compile in the night...
Click to expand...
Click to collapse
i cant, because i don know about how to build rom from source
Please use this thread for further discussion.
http://forum.xda-developers.com/galaxy-ace/s5830i-general/cm11-cooperve5830i-thread-cynogenmod-11-t2808268
This thread is for all the discussions,queries,help,etc so as to avoid spam in dev threads.
Important:-
Finallyyyy after so much struggle by each and everyone of us.Broadcomm released the drives.And if there are no more tricks in it by broadcomm we can hope for stable cm7,cm9 and maybe even cm10.
For more info about what this is,what is possible in future and for further update go here:-
http://forum.xda-developers.com/showthread.php?t=2666566
One again a huge thanks to all devs for all their contributions and wishing them best of luck for future from all the Ace i community.
Our dev team without whom we would still be in the middle of no where.:-
1.Bieltv.3
2.Lopicl.00
3.prototype-U
4.SpaceCaker
5.Percy-g2
6.Kissingmylove
7. Legolas93
Links to Dev threads
1. CM 7.2-
http://forum.xda-developers.com/showthread.php?t=2080065
2. CM 9.1-
http://forum.xda-developers.com/showthread.php?t=2118645
3. Bieltv.3 cm7.2 basic kernel-
http://forum.xda-developers.com/showthread.php?t=2253010
4. Thunder Kernel by Lopicl.00-
http://forum.xda-developers.com/showthread.php?t=2335947
5. Hells Fusion Kernel(prototype-U kernel)-
http://forum.xda-developers.com/showthread.php?t=2022147
Stock Task Manager for cm7/cm9 by me:-
(for checking ram usage and clearing it)
http://db.tt/LkPNZ3jS
Just copy in system\app and give rw-r-r permission and reboot.
And if you are interested in helping devs to fix bugs fast then please provide them with logcats of your bugs.Simple guide for making logcat is here
Happy flashing.
Geetings -HellRaiser-
has someone tried exchanging the meta.inf folders of pre-alpha 3 with alpha 1???
i dont have any way to donate for our dev ,
pelase guyz lets donate bieltv.3 for our self
]
#Please
in pre-alpha 3 does not work online and network indicator shows no signal, how to fix it?
now i have rafael kernel do i have to go back to Stock kernel then hell lock kernel or now i can directly install hell lock kernel and install this rom ???
ithunter said:
now i have rafael kernel do i have to go back to Stock kernel then hell lock kernel or now i can directly install hell lock kernel and install this rom ???
Click to expand...
Click to collapse
i think its important to install stock rom but you can give it a try.....
-HellRaiser- said:
has someone tried exchanging the meta.inf folders of pre-alpha 3 with alpha 1???
Click to expand...
Click to collapse
I tried to re-sign the zip and i checked the updater-script, but all is ok!
Lopicl.00 said:
I tried to re-sign the zip and i checked the updater-script, but all is ok!
Click to expand...
Click to collapse
then it must be something wrong with the changes made by bieltv3......
Lopicl.00 said:
I tried to re-sign the zip and i checked the updater-script, but all is ok!
Click to expand...
Click to collapse
Maybe some features/drivers etc. when bieltv.3 try to build don't want to work properly or they're incorrectly compiled or something else . . .
Alucard1989pl said:
Maybe some features/drivers etc. when bieltv.3 try to build don't want to work properly or they're incorrectly compiled or something else . . .
Click to expand...
Click to collapse
i think he needs to check the changes he made after pre-alpha 3.But that is going to be difficult.
-HellRaiser- said:
i think he needs to check the changes he made after pre-alpha 3.But that is going to be difficult.
Click to expand...
Click to collapse
I don't know how he build the CM7 rom because i'm not as advanced developer as him but i appreciate their hard work for free and i'm really patient before they biuld fully worked CM7 for ours Ace"i"
Alucard1989pl said:
I don't know how he build the CM7 rom because i'm not as advanced developer as him but i appreciate their hard work for free and i'm really patient before they biuld fully worked CM7 for ours Ace"i"
Click to expand...
Click to collapse
patience is the key at present.....if we want a working cm7 we have to be patient otherwise our devs will be pissed off and we will again be left on our own......
-HellRaiser- said:
patience is the key at present.....if we want a working cm7 we have to be patient otherwise our devs will be pissed off and we will again be left on our own......
Click to expand...
Click to collapse
Heh . . .try to tell this noobs and newbies . . . they all aren't patient but they're very laziest guys -_-" . . . Of course i don't blame or abuse someones . . . but some of this people can be very galling . . .
Alucard1989pl said:
Heh . . .try to tell this noobs and newbies . . . they all aren't patient but they're very laziest guys -_-" . . . Of course i don't blame or abuse someones . . . but some of this people can be very galling . . .
Click to expand...
Click to collapse
but i still think the noobs on ace i thread are less annoying compared to what i have seen on threads of other phones......and after all thats the reason for this cm7 thread so that all noobs can show their noobiness here.....
Also can you tell me about Democracy rom u flashed from y gal y forum......
-HellRaiser- said:
i think he needs to check the changes he made after pre-alpha 3.But that is going to be difficult.
Click to expand...
Click to collapse
m... I've an idea, I enable bluetooth filew to be able to use bluetooth, was disabled in galaxy y sources, maybe that was the why... anyway seems strange that bluetooth libs break boot, that's why I enable it... will try to disable and compile again but my ideas are starting to waste all of them...
bieltv.3 said:
m... I've an idea, I enable bluetooth filew to be able to use bluetooth, was disabled in galaxy y sources, maybe that was the why... anyway seems strange that bluetooth libs break boot, that's why I enable it... will try to disable and compile again but my ideas are starting to waste all of them...
Click to expand...
Click to collapse
well i know its a tough job for you but as i remember before starting development for our device you told that one of your friend will donate his ace 'i' to you:-
This is from your blog---->"SO, as you probably now, we released beta 4 of CM10.1, you can download at XDA, wayland threads, but another important new is that I'm moving to another device for a couple of days, many people ask me to and one of my friends will donate me one, the galaxy ace 'i' and I don't know if that is some kind of chance but broadcomm has released the HW drivers for this device, so they can finally get CM7 working, and I will compile it so stay tuned for more info "
So cant you ask your friend to lend his to you.........
First he have to buy a device and then Ive to tell him and then he decide to borow me or not... So probably by donations will be faster and also for.me free time here
Enviado desde mi GT-S5830 usando Tapatalk 2
bieltv.3 said:
First he have to buy a device and then Ive to tell him and then he decide to borow me or not... So probably by donations will be faster and also for.me free time here
Enviado desde mi GT-S5830 usando Tapatalk 2
Click to expand...
Click to collapse
But to be frank i really really dont think enough donations will be met to buy this device.....you would really have to lend form someone or the other.....
ok so biel has finally got the device up and running.....hope he will now test and then release the rom.....
I've done online, now it works That correction: http://forum.xda-developers.com/attachment.php?attachmentid=1633162&stc=1&d=1357826193
Just added to the file build.prop some lines
I currently work for make cm10.1 to golfu! I use the kernel of cute_prince, but I'll probably be making any changes if necessary...
if someone want to help to advance the project, I leave the link to download the rom!
I try to work as much as possible about the project but I do not have much time: s This is his if you want help, do not hesitate! Your aid goes help this is certain I put the file of the device on my github and file for the kernel are on the github of cute_prince for the moment but it is available since mine: P
Finally, I will publish here all link to the builds!
Build 1 (test only!) (2013-05-24)
Github
Device Github
Kernel Github Credit to cute_prince
the boot stop at htc picture, soo i upload the fix tomorrow just raplace this file in lib folder libandroid_runtime.so libandroid_servers.so libmedia_jni.so with the cm10 file
GL
Good Luck mate ....
for811 said:
the boot stop at htc picture, soo i upload the fix tomorrow just raplace this file in lib folder libandroid_runtime.so libandroid_servers.so libmedia_jni.so with the cm10 file
Click to expand...
Click to collapse
Wont work mate, i have tried many 4.2.2 roms, it will not wok, the set_perms are different and you'll get an error installing, if you use stock cm10 perms you get bootloop, when you carry the libs over it will stay at HTC splash screen, you need to wait for it to be built from source, sorry /:
Can you released to me your port? I can help you.
Jelly Android said:
Can you released to me your port? I can help you.
Click to expand...
Click to collapse
Listen to me oh my god, I have tried many ports and the lib swap will not help at all!!!! Trust Me! I've tried, needs to ported cleanly by source, or built by source, the porting method WILL NOT WORK! At least not for me and I've tried 15 different ROMs and devices! Trust me, need to be source built!
penguin449 said:
Listen to me oh my god, I have tried many ports and the lib swap will not help at all!!!! Trust Me! I've tried, needs to ported cleanly by source, or built by source, the porting method WILL NOT WORK! At least not for me and I've tried 15 different ROMs and devices! Trust me, need to be source built!
Click to expand...
Click to collapse
You are absolutely right!! You cannot port roms of different android versions................Only Method is to compile from source.....
okay, the port dont work, therefore need to compile from source, but I'm new to android developing under ... So I still have a lot to learn, such as how port device from source, soo for this part someone will do in my place anyway :/ I'll have to experiment to port cm10.1 on Golfu and perhaps lead to something
for811 said:
okay, the port dont work, therefore need to compile from source, but I'm new to android developing under ... So I still have a lot to learn, such as how port device from source, soo for this part someone will do in my place anyway :/ I'll have to experiment to port cm10.1 on Golfu and perhaps lead to something
Click to expand...
Click to collapse
Dude, YOU CANNOT PORT 4.2.2 WHEN WE ONLY HAVE A 4.1.2 BASE!
penguin449 said:
Dude, YOU CANNOT PORT 4.2.2 WHEN WE ONLY HAVE A 4.1.2 BASE!
Click to expand...
Click to collapse
when the first 4.1.2 build is create, is dont have a 4.1.2 base?
for811 said:
when the first 4.1.2 build is create, is dont have a 4.1.2 base?
Click to expand...
Click to collapse
When CM10.1 is released we will have a 4.2.2 base to use
penguin449 said:
When CM10.1 is released we will have a 4.2.2 base to use
Click to expand...
Click to collapse
Yess, but i will build cm10.1 from source, not port with another 4.2.2 base
for811 said:
Yess, but i will build cm10.1 from source, not port with another 4.2.2 base
Click to expand...
Click to collapse
Go for it mate, i'm here to test
i will try to make the device tree on my github this weekend! when to be made I will get you the link to my github: P
To 4.2.2? thank you
saider said:
To 4.2.2? thank you
Click to expand...
Click to collapse
yess!
Man I'd rather have a cm9 with working Wi-Fi than an incomplete cm10.1... I still goes for the .ko file thingy to be released, compiled or ported
0118 999 881 999 119 7253
Okey
I have some problem with my ubuntu computer so I was not able to advance this weekend but as soon as I resolve my problems im starting!
Fist build development!!
I'll probably be able to make a first build by the end of the week or early next week!!
Hello XDA,
As all of you may know there is a 4G LTE version of the Moto G 2nd Generation, better known under the model number XT1072 and XT1079. Unfortunately almost all ROMs are created for the titan. While the titan ROMs boot just fine because of the almost exact HW, when installing those ROMS we don't get 4G and the speakers and earpeace, especially while calling, get unusable.
So instead of sitting on my butt and asking LUK to develop a 4G patch, can anyone guide me ? I know how to setup the SDK and know the theory about compiling from source but have never done it. Do we have to recompile something or can I just replace certain files with some other files from the (one and only) CM12.1 port for the THEA ?
This must be doable I think.
soulaiman said:
Hello XDA,
As all of you may know there is a 4G LTE version of the Moto G 2nd Generation, better known under the model number XT1072 and XT1079. Unfortunately almost all ROMs are created for the titan. While the titan ROMs boot just fine because of the almost exact HW, when installing those ROMS we don't get 4G and the speakers and earpeace, especially while calling, get unusable.
So instead of sitting on my butt and asking LUK to develop a 4G patch, can anyone guide me ? I know how to setup the SDK and know the theory about compiling from source but have never done it. Do we have to recompile something or can I just replace certain files with some other files from the (one and only) CM12.1 port for the THEA ?
This must be doable I think.
Click to expand...
Click to collapse
It's easy but I'm not going to help in dirty ports. Build roms from source instead, this is my recommendation.
If you want to learn how to build roms from source I can help you but you'll need to have Linux machine to do that.
LuK1337 said:
It's easy but I'm not going to help in dirty ports. Build roms from source instead, this is my recommendation.
If you want to learn how to build roms from source I can help you but you'll need to have Linux machine to do that.
Click to expand...
Click to collapse
Thanks for the reply Luk, I also think that building from source is the same. I have followed many, many guides but somehow the part where I have to point to the thea specific HW blobs fails. The extract-files.sh points to ./../../$VENDOR/msm8226-common/setup-makefiles.sh [email protected] wich I understand is the motorola folder in the WORKING_DIRECTORY. Somehow I can't find the right repo on github to point it at.
Sorry for the noobish Q... There is a first time for everything.
EDIT: I wanted to say that I think that porting from source is better, not the same.
soulaiman said:
Thanks for the reply Luk, I also think that building from source is the same. I have followed many, many guides but somehow the part where I have to point to the thea specific HW blobs fails. The extract-files.sh points to ./../../$VENDOR/msm8226-common/setup-makefiles.sh [email protected] wich I understand is the motorola folder in the WORKING_DIRECTORY. Somehow I can't find the right repo on github to point it at.
Sorry for the noobish Q... There is a first time for everything.
EDIT: I wanted to say that I think that porting from source is better, not the same.
Click to expand...
Click to collapse
You could use blobs from TheMuppets instead: https://github.com/TheMuppets/proprietary_vendor_motorola
LuK1337 said:
You could use blobs from TheMuppets instead: https://github.com/TheMuppets/proprietary_vendor_motorola
Click to expand...
Click to collapse
Thanks !!
I was really confused and got the CM12 branch instead the first time. Lol now I feel like a noob haha (wich I am when it comes to developing).
Will post here if I have any Questions/errors (that google can't help me with).
:good:
soulaiman said:
Thanks !!
I was really confused and got the CM12 branch instead the first time. Lol now I feel like a noob haha (wich I am when it comes to developing).
Will post here if I have any Questions/errors (that google can't help me with).
:good:
Click to expand...
Click to collapse
Also don't use git clone manually, make your local_manifests xml instead.
LuK1337 said:
Also don't use git clone manually, make your local_manifests xml instead.
Click to expand...
Click to collapse
Oh okay, I will look into that in a minute.
Now I got an issue that really got my head hurting... When I do the lunch command, my Moto G isn't in the list of devices... What Am I doing wrong ?
I have got a directory called thea in WORKING_DIRECTORY/device/moto/thea
I have got also an old thea directory (cm12.1) in WORKING_DIRECTORY/thea and WORKING_DIRECTORY/thea2
All the blobs from TheMuppits repo are in de device/moto/thea dir
All the poperiatary blobs are also in the XT907 dir...
I've done the
Code:
cd /device/moto/thea
init android-5.1.1_rx
repo sync
and let it finish without errors.
Once I get over this I will be good to go.
Oh, and thanks for sharing the knowledge !
soulaiman said:
Oh okay, I will look into that in a minute.
Now I got an issue that really got my head hurting... When I do the lunch command, my Moto G isn't in the list of devices... What Am I doing wrong ?
I have got a directory called thea in WORKING_DIRECTORY/device/moto/thea
I have got also an old thea directory (cm12.1) in WORKING_DIRECTORY/thea and WORKING_DIRECTORY/thea2
All the blobs from TheMuppits repo are in de device/moto/thea dir
All the poperiatary blobs are also in the XT907 dir...
I've done the
Code:
cd /device/moto/thea
init android-5.1.1_rx
repo sync
and let it finish without errors.
Once I get over this I will be good to go.
Oh, and thanks for sharing the knowledge !
Click to expand...
Click to collapse
Your directories are bit off, it should be looking like this.
CM/device/motorola/msm8226-common
CM/device/motorola/thea
CM/device/qcom/sepolicy
CM/device/qcom/common
CM/kernel/mototola/msm8226
CM/vendor/motorola
Don't forget about rest of CM source :3
LuK1337 said:
Your directories are bit off, it should be looking like this.
CM/device/motorola/msm8226-common
CM/device/motorola/thea
CM/device/qcom/sepolicy
CM/device/qcom/common
CM/kernel/mototola/msm8226
CM/vendor/motorola
Don't forget about rest of CM source :3
Click to expand...
Click to collapse
Oh okay got ya. Do I have to do some kind of refresh command when I touch the folders ?
soulaiman said:
Oh okay got ya. Do I have to do some kind of refresh command when I touch the folders ?
Click to expand...
Click to collapse
If you're building CM then all you have to do is to get vendor, do envsetup.sh and just brunch thea.
LuK1337 said:
If you're building CM then all you have to do is to get vendor, do envsetup.sh and just brunch thea.
Click to expand...
Click to collapse
I'm trying to build an AOSP build like yours to learn. I'm following this guide:
http://forum.xda-developers.com/chef-central/android/tutorial-compile-lollipop-ubuntu-t2929410
I guess it is similar in steps as what you described ?
Even with all the files in the correct directories when I exec the lunch command it doesn't list the moto G. See screenshot.
soulaiman said:
I'm trying to build an AOSP build like yours to learn. I'm following this guide:
http://forum.xda-developers.com/chef-central/android/tutorial-compile-lollipop-ubuntu-t2929410
I guess it is similar in steps as what you described ?
Even with all the files in the correct directories when I exec the lunch command it doesn't list the moto G. See screenshot.
Click to expand...
Click to collapse
You won't get clean AOSP to build, also u messed up directories as you put vendor in device.
If you have hangouts you can add me ( https://plus.google.com/108108436166506337243 ) so I could help you live.
LuK1337 said:
You won't get clean AOSP to build, also u messed up directories as you put vendor in device.
If you have hangouts you can add me ( https://plus.google.com/108108436166506337243 ) so I could help you live.
Click to expand...
Click to collapse
Thanks for all the help man, really appreciate it !
Yeah stupid fault of my part. Will try it.
About Hangouts: My hangouts app allways FC's on me so that will be for another day. I'll add you asap ! Thanks!
Also it is 1:45AM here so
soulaiman said:
Thanks for all the help man, really appreciate it !
Yeah stupid fault of my part. Will try it.
About Hangouts: My hangouts app allways FC's on me so that will be for another day. I'll add you asap ! Thanks!
Also it is 1:45AM here so [emoji14]
Click to expand...
Click to collapse
K, I'm in the same time zone fyi.
Hello there, it's time to get this rolling somewhere.
This is a Development-Thread. Please don't post if you aren't a developer.
What this IS
This is a Development thread, a platform for developers to discuss the development of CyanogenMod for the G925F. It's made so that we can get this working, fix up the problems - because there will be severe ones - and achieve a working official Rom at some point.
At the moment it's @OldDroid and me with help, but it would be awesome if interested devs would join in so that we can make this a team effort.
In short, it's a Dev-Thread in a dev section.
Right now it doesn't work and I'm not sure that it will work.
What this IS NOT
This is NOT a working Rom. Not even close. I can only link you to the kernel repo and soon to device and vendor, as they are almost completed for a first try.
And yes, there is no download link for the Rom. Because there isn't anything you could download yet.
This is also NOT intended as a Q&A thread. Please don't ask if your variant will be supported, I will respond by trolling. Firstand only priority is to get this running, then we'll talk about variants.
And ETA is an evil word with no meaning here. I work slowly, deal with it
Where are we currently?
Much further than a day ago
Thanks to @OldDroid, we've teamed up
All the links you want (minus the download link :angel
device: (soon, almost complete)
https://gitlab.com/mythos234/device_samsung_zeroltexx
vendor:
https://gitlab.com/mythos234/vendor_samsung_zerolte
kernel:
https://gitlab.com/mythos234/zerolte-kernel-CM
Once available, buggy alpha builds will be posted here
///
vendor and device will soon be pushed to my github
Reserved
i'll join you ... also started working on cm12.1 for s6 edge 5 days ago (currently in england with my school class)
vendor is setup
OldDroid said:
i'll join you ... also started working on cm12.1 for s6 edge 5 days ago (currently in england with my school class)
Click to expand...
Click to collapse
Welcome aboard then
vendor is finally setup and good to go!
https://github.com/mythos234/vendor_samsung_zerolte
It's apparently not without some minor casualties, but we got it. Huge thanks to @RaymanFX, he's helping me, since I'm not that much into CM building yet and I'm also basing this project on his CM for the N910C, which's 5433 is darn similar to our 7420, so we got a pretty good base to begin with.
add me as participant to the repos ^^
https://github.com/OldDroid
OldDroid said:
add me as participant to the repos ^^
https://github.com/OldDroid
Click to expand...
Click to collapse
Done for all the 3 of them
Looks like I killed Bluetooth for now (lol). Other than that it's slow but steady progress.
mythos234 said:
Looks like I killed Bluetooth for now (lol). Other than that it's slow but steady progress.
Click to expand...
Click to collapse
What do you mean "killed"? Killed the chip or wiped the MAC addr. or something?
nasko_spasko said:
What do you mean "killed"? Killed the chip or wiped the MAC addr. or something?
Click to expand...
Click to collapse
I'm currently building the Rom with completely removed Bluetooth support
First Build is compiled and ready for a test.. But I can't install the zip. This would be hillarious if it wasn't so annoying
mythos234 said:
Besides I said it can't be installed Hard to test something you can't even install
Click to expand...
Click to collapse
I think that there was a mistake in the partition sizes.. /system was declared as 4.1GB, but it's only 3.6GB. Recompiling with a new value, should be able to flash it then
Good luck develop without documentation for exynos chipset.
But can you tell us more in details how porting works and what are the challenges with it.
Is it hard to develop a rom without samsung binary files and drivers? I know they are proprietary and closed soruce.
If just Samsung could be more developer friendly like Sony.
We can request source for closed binaries here, http://opensource.samsung.com/reception/receptionSub.do?method=inquiryView, most likely they wont answer
Aircondition said:
Good luck develop without documentation for exynos chipset.
Click to expand...
Click to collapse
The lack of drivers makes this a fun exercise almost Where's be the challenge if everything was easy...?
Aircondition said:
Good luck develop without documentation for exynos chipset.
But can you tell us more in details how porting works and what are the challenges with it.
Is it hard to develop a rom without samsung binary files and drivers? I know they are proprietary and closed soruce.
If just Samsung could be more developer friendly like Sony.
We can request source for closed binaries here, http://opensource.samsung.com/reception/receptionSub.do?method=inquiryView, most likely they wont answer
Click to expand...
Click to collapse
I can't say what the challenges here will be, since I couldn't manage to even flash it yet - Second build is compiling since hours now. For now it's using all the proprietrary stuff we managed to grab and some additional stuff from the 5433 CM. But without booting it's hard to tell what won't work and might present a challenge ^^ From what I saw it'll be tough to just get the modem running. The hard part is to write the drivers yourself
mythos234 said:
I can't say what the challenges here will be, since I couldn't manage to even flash it yet - Second build is compiling since hours now. For now it's using all the proprietrary stuff we managed to grab and some additional stuff from the 5433 CM. But without booting it's hard to tell what won't work and might present a challenge ^^ From what I saw it'll be tough to just get the modem running. The hard part is to write the drivers yourself
Click to expand...
Click to collapse
It's interesting that you can use drivers from 5433, which is a 32bit platform. Most drivers are not compatible when you switch from 32bit to 64bit if I am right?
Sent from my SM-G920F using Tapatalk
lch920619x said:
It's interesting that you can use drivers from 5433, which is a 32bit platform. Most drivers are not compatible when you switch from 32bit to 64bit if I am right?
Sent from my SM-G920F using Tapatalk
Click to expand...
Click to collapse
As a base to know how to do it, obviously we can't just use drivers for a different chipset
Updated the /system size in the BoardConfig and at least it flashes. But it doesn't want to boot for some reason yet.
mythos234 said:
Updated the /system size in the BoardConfig and at least it flashes. But it doesn't want to boot for some reason yet.
Click to expand...
Click to collapse
If you have the 5.1.1 boot loader and are using 5.0.2 as a base. Sboot will not boot it. As a fyi. It checks Linux versions.
-Mr. X- said:
If you have the 5.1.1 boot loader and are using 5.0.2 as a base. Sboot will not boot it. As a fyi. It checks Linux versions.
Click to expand...
Click to collapse
Both is 5.1.1 and Sboot seems to clear the boot as well, everything seems to go fine, it just doesn't boot. :/ Trying with building the kernel during the build itself instead of using a prebuilt one and see how that goes
mythos234 said:
Both is 5.1.1 and Sboot seems to clear the boot as well, everything seems to go fine, it just doesn't boot. :/ Trying with building the kernel during the build itself instead of using a prebuilt one and see how that goes
Click to expand...
Click to collapse
I would personally flash an Engineering boot loader while doing this, to ensure version checking is not the issue.