Hey, I have been given a phone off a friend to fix but it wont turn on. Booting normally, I get a vibration and then the backlight comes on but i cannot see anything. When i try to boot into the bootloader by holding the camera button and powering it on, the backlight comes on but nothing else. I cannot see the bootloader. Under both circumstances, I cannot turn the phone off. I have to pull the battery to turn it off.
Does anyone have any suggestions about a possible fix? Thanks
Havie you tried send when trying to enter bootloader? If it resets then you can still get to bootloader. If not, your friend has soft bricked and only way is to JTAG which takes strong hardware knowledge and steady hands.
-------------------------------------
Sent via the XDA Tapatalk App
ok im having the exact same problem. actually i thought it was a battery problem so i spent 77$ on a 3700 mAh new batter i guess tripple life... and got it yesterday booted gave same problems. black screen where T-Mobile should be yet the rom loads with scribble screen meaning u see part but it looks like the pixels are messed up. so actually decided to resort to what someone told me a Factory Reset so Pressing Camera + Power i got a Black Backlight screen yet wont show... and I cant turn it off without Taking out the Battery this has become a issue after installing cyanogen 5.0.7 T5... since then i Re-rom'd to superbad 1.2.5 same problem screen scribbles and stops im thinking did I fry it i dont even know how to google my problem because its pretty unique it isnt a battery issue its something in the hardware ... or am I wrong please send us some feedback... ill keep this thread in mind
Sorry, what do you mean by 'send'. I am a complete noob when it comes to G1's. I have worked out i can shut off the phone by holding call + menu + end but thats it. I still cannot see anything at all on the screen. I still only get a vibration on boot. How would I know if the boot has been sucessful but i simply cannot see?
Could the flex ribbon cable be nackered?
Hey guys I think I actually did it. I was going to install the JPC Froyo Rom, and somehow booted into recovery in the ROM. Now whenever I turn the phone on it boots into recovery, and none of the button combinations work for putting it into Download mode so I can flash back to stock. On the i9000 thread it says that if you get into this situation you cannot flash back. Any of you guys run into this issue? If not then it looks like I'll be trying to convince an ATT rep to give me a new phone
Try powering off... Then hold vol up and down buttons then plug in usb.... That happened to me... Your not bricked
Sent from my SAMSUNG-SGH-I897 using XDA App
Connect to adb and run reboot command
Sent from my GT-I9000 using XDA App
Nope
Nope sorry guys I know all of what you just said. As for plugging in USB while holding volume buttons, it'll just go to that battery charging screen, and adb doesn't work because it doesn't boot past recovery. Sorry guys but yes it was bricked. It's okay though because I just went to ATT and since they can't identify the problem they just replaced the phone
Thought mine was bricked one night, too. Same scenario. Tried dropping the SIM and SD card out even though I didn't think it would make a difference, but it did. Got to download screen and reflashed with ODIN.
Good luck.
Sent from my SAMSUNG-SGH-I897 using XDA App
KCutrer1 said:
Nope sorry guys I know all of what you just said. As for plugging in USB while holding volume buttons, it'll just go to that battery charging screen, and adb doesn't work because it doesn't boot past recovery. Sorry guys but yes it was bricked. It's okay though because I just went to ATT and since they can't identify the problem they just replaced the phone
Click to expand...
Click to collapse
If you pull the battery, then put the battery in. hold both volume buttons buttons, and then plug the phone into the computer, it didn't boot to download?
Im curious if you even tried to use the Odin one click thread
There are 4 or 5 ways in that thread on how to get to download mode. And how exactly does this relate to development...just another curious thought. Well, you are getting a new phone, just hope that ATT or Samsung don't try to figure out the cause of your phone being "bricked".
AGAIN!
Okay after this I swear I won't be messing around with Froyo anymore. Here's the story: I got into download on the replacement captivate. Tried to install JPC froyo, but it never started flashing so I unplugged it from Odin and then tried to turn it back on. It goes to the normal "connect phone to computer" screen. However no attempts to get back into download mode have worked. Holding both volume buttons and power until second black screen doesn't work, booting while holding volume down doesn't work, holding both volume buttons and then inserting USB cable doesn't work. I think I'm stuck in this screen unless there's some incredible way I have yet to try. Anybody have any ideas? I would greatly appreciate feedback from the experienced users (Zilch25, designgears, kaik, reaver117), because I think I'd be pushing it trying to get it replaced a second time in such rapid succession
To flashman2002:
I put it in this section because it's in the development section that most flashing and such occurs so I thought there would be the greatest knowledge base. And yes I've pored over the one click thread and none of the methods mentioned there have any effect!
Jeez, I just scared the **** out of myself. I ran the remove lagfix script and it rebooted my phone but it was just a black screen. So I take the battery out. Bad Idea. It showed the ATT screen but just black after that. I could get it into recovery mode but not download. Then I messed some more and would only show a vague disconnected pic.
Finally I got it into download by doing this: (had odin open before hand)
1. took everything out including sim and usb cable.
2. quickly inserted battery and held volume buttons and very quickly inserted usb.
I'm pretty sure its the speed that matters because I tried about 4 times and only when I did it really fast did it work.
ThisWasATriumph said:
Jeez, I just scared the **** out of myself. I ran the remove lagfix script and it rebooted my phone but it was just a black screen. So I take the battery out. Bad Idea. It showed the ATT screen but just black after that. I could get it into recovery mode but not download. Then I messed some more and would only show a vague disconnected pic.
Finally I got it into download by doing this: (had odin open before hand)
1. took everything out including sim and usb cable.
2. quickly inserted battery and held volume buttons and very quickly inserted usb.
I'm pretty sure its the speed that matters because I tried about 4 times and only when I did it really fast did it work.
Click to expand...
Click to collapse
Nope. Unless you can do this with godly speed I dont think it'll work. I just got to the "Connect Phone to Computer" screen again.
You had the usb in before anything appeared on the screen right?
ThisWasATriumph said:
You had the usb in before anything appeared on the screen right?
Click to expand...
Click to collapse
Yeah originally. I can get to that screen now by just putting the battery in and holding power button. It seems to behave exactly like it normally would, just can't get out of it.
What screen? The screen you want has a big yellow triangle and says download.
ThisWasATriumph said:
What screen? The screen you want has a big yellow triangle and says download.
Click to expand...
Click to collapse
No it's on the phone...!...computer screen. That's what I'm saying, it's been stuck here for a while and none of the methods described on the one click thread work. I've been here before and just holding volume buttons and holding down power for it to boot twice and releasing would do it. Not so anymore. Can't get into download mode doing anything!
Well I read In the SRE thread I think that there are reports of newer phones not responding to any button combos. Bad batch they said not on purpose...
Also for the i9000 apparently you only have to hold the down volume key so since you flashed a i9000 rom try that if you haven't already.
You cant get into recovery right? Just holding volume and power then letting go of power after a bit?
Adb reboot download...
Sent from my SAMSUNG-SGH-I897 using XDA App
ThisWasATriumph said:
Well I read In the SRE thread I think that there are reports of newer phones not responding to any button combos. Bad batch they said not on purpose...
Also for the i9000 apparently you only have to hold the down volume key so since you flashed a i9000 rom try that if you haven't already.
You cant get into recovery right? Just holding volume and power then letting go of power after a bit?
Click to expand...
Click to collapse
Nope none of it works. I just got it replaced less then 3 hours ago and I already bricked it. I hope somebody finds out something that'll get this fixed. Maybe some way to force download mode through a computer application or something.
Well theres adb like mentioned above but im pretty sure that requires at least recovery mode working.
Like i said before i was stuck on the same screen so maybe theres still hope.
If all else fails someone will figure out how to JTAG these things eventually...
ThisWasATriumph said:
Jeez, I just scared the **** out of myself. I ran the remove lagfix script and it rebooted my phone but it was just a black screen. So I take the battery out. Bad Idea. It showed the ATT screen but just black after that. I could get it into recovery mode but not download. Then I messed some more and would only show a vague disconnected pic.
Finally I got it into download by doing this: (had odin open before hand)
1. took everything out including sim and usb cable.
2. quickly inserted battery and held volume buttons and very quickly inserted usb.
I'm pretty sure its the speed that matters because I tried about 4 times and only when I did it really fast did it work.
Click to expand...
Click to collapse
I know it doesn't help you out now, but when you remove the lag fix, just leave it set on the black screen. It's doing its thing. It will reboot when it's done. The home keys should still light up if you press them in this state...
Well thanks for your input anyway guys. Hopefully somebody figures something out. For now I guess I'll keep the SIM in my old iPhone 3G so I at least have a phone. Tomorrow I'll go to another ATT store in my area. Chances are the rep won't know what the hell that screen means and will replace the phone promptly.
Well for some reason, I pulled out my phone, and my power key stopped working. I have had this happen before. What I did was use odin one click ji6 to flash back to stock 2.2. (I have a 1012 build so i didnt want to talk to risk of bricking.) I was on cyanogenmod when this last occured, but now I'm on legend 4 kk4, corn kernal v7.0A. The real problem is that the OS, Bootloader, or something thinks the power key is being held down, and so i cannot get into download mode without using ADB. I am scared that if i brick the phone, i wont be able to get into download mode. Also, i went to an amusement park a few days ago, and i went on a water ride, and my phone got a little wet, not too much, and the stickers for water marks are still white, but i do not have warranty. I am not sure if the key is broken, or if it is the OS. Also, when i put my battery in, it auto-reboots. So i cannot turn my phone off without removing the battery. Also, i cannot flash because my computer is at home. Any suggestions?
well i found out it was a hardware issue so i need to go get it fixed, but im not sure, it works, but it is like loose, it sometimes works, sometimes doesnt. anybody have any idea before i send it in?
I have the same problem, what I do is turn on volume rocker wake. To get into recovery I either use Rom manager, or hold the combo to get into recovery when you reinsert the battery into the phone. You have to hold it until the boot loader screen shows for the second time. Once in recovery, either search back or home will be used to select options, depending on the kennel. I read some where that if you take apart the phone and clean where the button makes contact it will fix it, but if I were you I would send it in
EDIT: just found this http://forum.xda-developers.com/showthread.php?t=1529320 it should help
Sent from my SGH-I897 using XDA
ya it isnt auto-rebooting, so I know its the plastic part of the key that is working. I actually tried volume rocker wake, and it didnt work out that well for me. I am actually on stock, ji6. I went to the att store and they told me to go get it fixed locally, so thats what im going to do. thanks for replying though
I'm stuck in a pretty crappy situation. The phone is on some weird bootloop. When it boots, the AT&T screen comes up, then some weird multi-colored screen comes on, the phone turns off, and this process repeats.
I know how to put it into download mode, but the phone turns on as soon as I put the battery in. I'm not sure how to have it powered off with the battery in long enough so I can hold the volume buttons down and plug the USB in. If I could at least get into download mode and flash something via Odin, I could possibly fix it.
Any suggestions?
did you try, remove battery, plug in usb, hold power and both volume buttons then insert battery? or even just hold vol down and power then insert battery?
adobrakic said:
I'm stuck in a pretty crappy situation. The phone is on some weird bootloop. When it boots, the AT&T screen comes up, then some weird multi-colored screen comes on, the phone turns off, and this process repeats.
I know how to put it into download mode, but the phone turns on as soon as I put the battery in. I'm not sure how to have it powered off with the battery in long enough so I can hold the volume buttons down and plug the USB in. If I could at least get into download mode and flash something via Odin, I could possibly fix it.
Any suggestions?
Click to expand...
Click to collapse
fractaline said:
did you try, remove battery, plug in usb, hold power and both volume buttons then insert battery? or even just hold vol down and power then insert battery?
Click to expand...
Click to collapse
(psst, he said his power button is broken)
You dont need to use the power buttons to enter download mode. Just hold both volume buttons and plug in usb. Though tbh I haven't had to do it in so long my memory is a bit foggy on whether it was both volume buttons + usb or just volume up + usb. Either way one of those should work. Im pretty sure you should be able to do it without the battery inserted.
When all else fails, jig it. Jig it hard.
Herp derp Captivate Tapatalk 2
fractaline said:
did you try, remove battery, plug in usb, hold power and both volume buttons then insert battery? or even just hold vol down and power then insert battery?
Click to expand...
Click to collapse
Well, the power button doesn't work, so I haven't tried the latter. It's not rooted, so trying to get into CWM wouldn't really do much. When I try to plug in the USB, hold the volume buttons, and plug in the battery last, the phone just goes to the battery charging screen. If I take the USB out.. it stays there.
I'm not sure why the phone turns on by itself as soon as I put the battery in. My sister has the same model, and she has to hold the power button to turn it on. :/
I just turned it on, and it's stuck on the AT&t screen instead of bootlooping. This is the first time it has done this after the bootloop began. Odin recognizes it. Is this ninja download mode? If so, could you please point me in the right direction of getting out of this mess? :x This is my sister's fiance's phone, I own a SGS4G. Really don't wanna risk this phone any more than I already have, lol.
Thanks, guys.
--Edit--
To be more specific, I attempted using this to root the phone, which resulted in this situation. Not sure if that's even helpful, but it can't hurt.
I feel for ya, I hate having hardware issues when a software issues happens..
follow fractaline's instructions: Odin ON, battery out, Good USB cable with good USB port Insert, (this is where it gets tricky), hold down volume up and volume down, whilst 2 seconds later putting the battery back in.
if you see the screen with something that looks like this, http://movilzone.org/files/2011/09/Captivate-Download-Mode1.jpeg
or this,
http://1.bp.blogspot.com/-BwmbWV5u6h8/TvNq1jXT7oI/AAAAAAAAMpU/_Mh4V9LMYd8/s1600/Semi-bricked.jpg, Then you can flash a kernel.
Were you on gingerbread 2.3.5? if so I would recommend this http://forum.xda-developers.com/showthread.php?t=1294477&highlight=corn
if you flash corn there is an option in CWM to install root I believe.
I used to flash the corn kernel all day to fix my 2.3.5 problems.
it really depends which version you previously were running. which is hard to tell since it wasn't your phone... more info needed, i'll be back in the morning. hope this helps.
Oh and on the hardware side of things, you could take the back plate off, the plate under the battery, and clean all the crap out. i find with mine i often get dust particles that interfere with my power button. there is a guide to properly tear down a captivate on xda somewhere... I've posted on it before as well.
or, take your fingernails and try and peel back the plastic on the edge of the glass up by the power button, if you can pull it back enough to blow air in there sometimes you can dislodge/clean out whatever is obstructing the power button.
Edit: if you do get it rooted, bring it up to ICS, it's fantastic up here
adobrakic said:
Well, the power button doesn't work, so I haven't tried the latter. It's not rooted, so trying to get into CWM wouldn't really do much. When I try to plug in the USB, hold the volume buttons, and plug in the battery last, the phone just goes to the battery charging screen. If I take the USB out.. it stays there.
I'm not sure why the phone turns on by itself as soon as I put the battery in. My sister has the same model, and she has to hold the power button to turn it on. :/
I just turned it on, and it's stuck on the AT&t screen instead of bootlooping. This is the first time it has done this after the bootloop began. Odin recognizes it. Is this ninja download mode? If so, could you please point me in the right direction of getting out of this mess? :x This is my sister's fiance's phone, I own a SGS4G. Really don't wanna risk this phone any more than I already have, lol.
Thanks, guys.
--Edit--
To be more specific, I attempted using this to root the phone, which resulted in this situation. Not sure if that's even helpful, but it can't hurt.
Click to expand...
Click to collapse
I think you were not on Gingerbread and you attempted to flash a gingerbread kernel. That is why it is bootlooping. You can flash back to stock (Gingerbread or froyo) and that should solve your issue. I'm trying to download and get the stock froyo kernel for you so you can flash that again. Just an FYI, applying root through CWM would require the use of the power button.
Try flashing this in the PDA in Odin. It is the stock froyo kernel.
https://www.dropbox.com/s/vx5r7hr3iokj764/zImage.tar
@Bacon, it was version 2.2. I can't get to download mode because the phone turns on as soon as I put the battery in. I'm not sure why it does this. Also, I don't get the bricked screen because it just bootloops. The AT&T screen comes on, then this comes on, the phone turns off, and this repeats. I'm assuming that the multi-colored screen would be the SGS screen, or something similar.
Oh and on the hardware side of things, you could take the back plate off, the plate under the battery, and clean all the crap out. i find with mine i often get dust particles that interfere with my power button. there is a guide to properly tear down a captivate on xda somewhere... I've posted on it before as well.
or, take your fingernails and try and peel back the plastic on the edge of the glass up by the power button, if you can pull it back enough to blow air in there sometimes you can dislodge/clean out whatever is obstructing the power button.
Click to expand...
Click to collapse
If it comes to that, I'll definitely keep this in mind.
@Red Wow, I'm stupid. -_- I don't know how I missed the "Requirements" on that page. Thanks, I'll try your .tar now.
--Edit--
Ah, unfortunately that AT&T screen wasn't download mode. I guess I'm just gonna have to keep trying until I finally get it into download mode. I just don't get why it's this difficult.
adobrakic said:
@Red Wow, I'm stupid. -_- I don't know how I missed the "Requirements" on that page. Thanks, I'll try your .tar now.
--Edit--
Ah, unfortunately that AT&T screen wasn't download mode. I guess I'm just gonna have to keep trying until I finally get it into download mode. I just don't get why it's this difficult.
Click to expand...
Click to collapse
You're not stupid. I added that after reading your post to prevent others from getting into the same situation.
As for download mode, if you don't have a jig, try this:
Take battery out
Plug phone into computer
Hold down Volume Buttons
Put battery in
adobrakic said:
@Red Wow, I'm stupid. -_- I don't know how I missed the "Requirements" on that page. Thanks, I'll try your .tar now.
--Edit--
Ah, unfortunately that AT&T screen wasn't download mode. I guess I'm just gonna have to keep trying until I finally get it into download mode. I just don't get why it's this difficult.
Click to expand...
Click to collapse
I can't tell you how many times i flashed the wrong kernel because i didn't read that it was for my version! lol!
that screen is unsettling...
well it's tough to say what to do next... just keep trying for a download mode. I've never used a Jig, perhaps that would be a good investment. Maybe use a one click.. I don't know..
I don't suppose this could be a bootloader issue could it?
EDIT: You're sure you have a reliable USB port/Plug? it's very important that both are good.
Red_81 said:
You're not stupid. I added that after reading your post to prevent others from getting into the same situation.
As for download mode, if you don't have a jig, try this:
Take battery out
Plug phone into computer
Hold down Volume Buttons
Put battery in
Click to expand...
Click to collapse
When I do that, I get to this screen. I'm assuming that's the battery charging screen, but the picture of the battery never comes up, just that refreshing icon.
If I keep holding the volume buttons, the phone seems to turn off in this state. I tried immediately unplugging the USB cable and letting go of the volume buttons once it does this. It stays off (if it's actually off). However, when I hold the volume buttons down and plug the USB back in, it just goes back to that screen. No download mode.
@Bacon
I don't suppose this could be a bootloader issue could it?
EDIT: You're sure you have a reliable USB port/Plug? it's very important that both are good.
Click to expand...
Click to collapse
To be honest, I have no idea if it could be a bootloader issue. I'm knowledgeable of Android as far as a user goes, I know nothing about the OS past rooting it, and tweaking it to OC/UC, etc. Also, I believe that the USB port/plug is reliable. It's the same combo I used prior to bricking it (lol). However, I have about 8 different ports and a few different cables as well, I'll give those a go.
Thanks for the help guys, I really do appreciate it.
adobrakic said:
@Bacon
To be honest, I have no idea if it could be a bootloader issue. I'm knowledgeable of Android as far as a user goes, I know nothing about the OS past rooting it, and tweaking it to OC/UC, etc. Also, I believe that the USB port/plug is reliable. It's the same combo I used prior to bricking it (lol). However, I have about 8 different ports and a few different cables as well, I'll give those a go.
Thanks for the help guys, I really do appreciate it.
Click to expand...
Click to collapse
Man I wish I could help more, i tend to be a hardware guy so i'm not much help other than telling you how to fix you power button... just keep flashing the crap out of it i guess. see if anything sticks...
Open a dos window and go to KK4_Root\Tools (probably on your C:\ drive)
Type:
Code:
adb wait-for-device reboot download
and hit enter.
Now try booting the phone with it plugged in again. If the computer recognizes it during the bootloop, it will issue it the command to boot into download mode.
Otherwise, I would suggest getting a download Jig. It will put you into download mode every time.
@Bacon
All good buddy, thanks so much for your help.
@Red
Holy ****, that worked perfectly. I'm in download mode right now, and am in the process of using a one click to get back to stock.
I'll post back with results.
--Edit--
This is the one click I was using. It won't flash bootloaders at first to prevent bricking, so I'm now in Android system recovery. I'm wanting to get into download mode again, but I guess since it's not in bootloop, the command Red gave me doesn't get me there. I need to get back into download so the bootloaders can be flashed. Any suggestions as to how I could get there again?
the most success I've had is using kies mini up to 2.3.5 and then using corn from there on.
Sent from my SGH-I897 using xda app-developers app
Does it always boot to recovery? You could just pull the battery and then try to let it boot normally.
Sent from my SAMSUNG-SGH-I897 using xda premium
@Bacon
Don't I need the phone to boot up for kies, though?
@Red
Yes. As soon as I put the battery in, the AT&T screen comes on, and then the Android System Recovery <3e> screen comes on.
When I try to plug in the USB, hold the volume buttons down, and plug in the battery last, it simply goes to the battery charging screen. I don't know why it doesn't go to download mode. I've tested the volume buttons in the Android System Recovery screen, both work just fine.
If you could get that power button to work you could try wiping data. That might get it out of that funk.
Try this:
Open a dos window and go to KK4_Root\Tools (probably on your C:\ drive)
Code:
adb reboot recovery --wipe_data
Crap, my computer doesn't seem to recognize the device when it's in the Android System Recovery screen. Should I try prying open the power button and seeing if I can get it to work? Don't see any other way out of this. I wish the soft-key buttons could be used for 'enter' instead of just the power button. :|
adobrakic said:
@Bacon
Don't I need the phone to boot up for kies, though?
Click to expand...
Click to collapse
Shoot, sorry i misread i thought you said you had gotten it partially fixed... my b.
I was just commenting how I'd had the most success using a one click to stock and moving up with kies. I'm afraid you may have to wipe data, which would suck.
Try the power button first. It's really easy taking the hardware apart. Just don't strip the tiny screws.... i only have three of the 6 holding my back plate in. You really don't need them all
Sent from my SGH-I897 using xda app-developers app
Honestly man, at this point, I wouldn't care if I had to repurchase all of the apps that I had if it was necessary to get the phone working. I'll YouTube some instructions for disassembly. Hopefully it'll get me out of this jam.