Related
I’ve been compiling some Cyanogenmod 10 builds for my tab recently and I've decided to share them here. The Cyanogenmod project is still under heavy development, so there will be bugs. Although I will be testing the wifi builds before I post them I may not be able to catch all bugs before I release the build; install these builds at your own risk and be aware of what you are doing. I take no responsibility for any damage caused by these builds. If I notice small bugs while testing I will make a note of them with the release. I plan on updating these builds every week or so.
Thanks to:
The Cyanogenmod team and pershoot- This is all their work, I am simply compiling their code.
RootzWiki - Providing gapps packages
Changelogs:
If there are major changes I will try to note them along with the builds, but for all other changes refer to the Cyanogenmod code review system: http://review.cyanogenmod.com/#q,status:merged,n,z
For gapps changelogs, refer to the RootzWiki gapps page: http://wiki.rootzwiki.com/Gapps
Builds:
2012.09.26
ROM:
Mirror 1: http://www.mediafire.com/?jbqzc4n7hrvyhc6
Mirror 2: http://d-h.st/7lc
GAPPS: http://goo.im/gapps/gapps-jb-20120726-signed.zip
MD5: 0ee6e5aa65f2b203d5893aedcc4349b4
2012.09.16
ROM:
Mirror 1: http://www.mediafire.com/?lh7db75g7vfd0hc
Mirror 2: http://d-h.st/Pvr
GAPPS: http://goo.im/gapps/gapps-jb-20120726-signed.zip
MD5: 719c05c28d8815c7c3e0382ce10b5c83
2012.09.01
ROM:
Mirror 1: http://www.mediafire.com/?lm54mos2u690chg
Mirror 2: http://d-h.st/xV3
GAPPS: http://goo.im/gapps/gapps-jb-20120726-signed.zip
MD5: 00ecd9dcde56f399c0ea3fa866f8ef5e
NOTE: Pershoot mentioned in his build notes that the goo.im july 26 gapps caused problems with his installation. I have tested this package on my build and it is working just fine. I think the problem is fixed but if you have issues try the older package.
Instructions:
1. Make a nandroid backup and save it in a safe place.
2. Wipe data, cache, and dalvik cache.
3. Install ROM zip in CWM.
4. Install GAPPS zip in CWM.
5. Reboot
Note: A wipe is probably not required for every single build, but it can't hurt. Make sure you make a backup even if you don't wipe.
If you enjoy these builds, you may wish to make a donation:
Cyanogenmod - http://www.cyanogenmod.com/ - See bottom of page
Nice
Second......
Sent from my ADR6425LVW using Tapatalk 2
Nice to see you back, CoffeeBeans.
TX
Gtalk audio works?
In The rom's Cyano no work
So far so good! Just a quick question. Is there anyway to just theme and change the battery to the circle mod or one like it? Thanks in advance!!
What kernel version is compiled with this build?
Not criticising, but was expecting front camera to work on this
ryanshapiro44 said:
So far so good! Just a quick question. Is there anyway to just theme and change the battery to the circle mod or one like it? Thanks in advance!!
Click to expand...
Click to collapse
If you go into Settings > System > Status Bar there is an option to change the battery status style. Unfortunately the percentage display doesn't seem to work but I'm sure CM will fix that soon. Your best bet for now is probably to enable it on the lock screen under Settings > Lock Screen > Battery status.
GalaxyNinja said:
What kernel version is compiled with this build?
Click to expand...
Click to collapse
2.6.36.4, pershoot hasn't added the 3.1 kernel to the jellybean repository just yet.
Ackoman said:
Not criticising, but was expecting front camera to work on this
Click to expand...
Click to collapse
Does it work on other cyanogenmod builds? If it does I can look into it.
Ackoman said:
Not criticising, but was expecting front camera to work on this
Click to expand...
Click to collapse
Not criticizing but you should have researched a bit. Front cam doesn't work yet on CM10.
njfoses said:
Not criticizing but you should have researched a bit. Front cam doesn't work yet on CM10.
Click to expand...
Click to collapse
I thought coffeebean's rom might have been the latest iteration of this:
http://forum.xda-developers.com/showthread.php?p=30240005#post30240005
If you look at the names. CM= cyanogen. That link is AOSP. Android open source. Totally differwnt
Thank you Coffeebeans, this one is all ready better then the last experimental from pershoot! I find it smoother and with better battery performance!! Sweet
i tried installing this :/ but i got Status 7 error on CWM6 it said some symlinks dont match , im using cwm6 that pershoot included
mrvtec69 said:
i tried installing this :/ but i got Status 7 error on CWM6 it said some symlinks dont match , im using cwm6 that pershoot included
Click to expand...
Click to collapse
I've been using TWRP for a while. No problems so far but I haven't flashed anything since Pershoot's last build on droidbasement.com.
Is there a means to change the items in the notification popup menu (the one in the lower right that pops up when the clock is tapped). I know Maple got is right in AOSP, just not sure what he did. When I make it visible, it seems to truncate some of the options.
Nice work on the ROM.
Getting a lot of screen flicker all the sudden, not sure whats causing it or how to best diagnose it.
Sent from my GT-P7510 using XDA Premium HD app
snakecharmer23 said:
I've been using TWRP for a while. No problems so far but I haven't flashed anything since Pershoot's last build on droidbasement.com.
Click to expand...
Click to collapse
cwm is known for that thats why I switched to twrp I recommend flashing that to the tab then flashing this rom had the same problem
alexige said:
Getting a lot of screen flicker all the sudden, not sure whats causing it or how to best diagnose it.
Sent from my GT-P7510 using XDA Premium HD app
Click to expand...
Click to collapse
Yes, that has suddenly started happening to me too
njfoses said:
Not criticizing but you should have researched a bit. Front cam doesn't work yet on CM10.
Click to expand...
Click to collapse
Just want to be sure, can front facing cam will ever work on cm10?. It seems all cm10 rom has been out of development. Cm stop buiding it and pershoot is not updating it supurb build recently. Want to know if jb is very difficult to treat? thanks
Disclaimer: By downloading and flashing/installing any of my files on your device, I am not responsible for any damage done to your phone and/or anything else that dissatisfies you. Proceed only if you're aware of what you're doing!
Uploading my files elsewhere (mirroring) is not appreciated. If you need to add my files elsewhere, just post the link to my goo.im account.
* Key layout:
Select: power button ( as of 05/05/2013 build 3 - also home button can be used )
Up/Down: volume up/volume down buttons
Back: back button
* How to flash:
Flash via odin3 in PDA column or with CWM recovery (only latest builds)
* Where to download:
Click here!
20/07/2013
* Fixed font issue
* Updated to support encryption (you need to format /data with this recovery to enable it)
23/11/2013
* updated to version 6.0.4.5
* use RGBX 8888 format
* Fixed backup/restore of .android_secure
* Support for Android 4.4
Special thanks to FrOz3n for helping me with testing initial builds!
XDA:DevDB Information
ClockWorkMod 6.0.x for Samsung Galaxy Mini 2, a Tool/Utility for the Samsung Galaxy Mini
Contributors
TheWhisp, CWM team
Version Information
Status: Stable
Current Stable Version: 6.0.3.3-b2
Stable Release Date: 2013-07-20
Current Beta Version: 6.0.4.5
Beta Release Date: 2013-11-23
Created 2013-10-11
Last Updated 2013-11-23
TheWhisp said:
Disclaimer: By downloading and flashing/installing any of my files on your device, I am not responsible for any damage done to your phone and/or anything else that dissatisfies you. Proceed only if you're aware of what you're doing!
Uploading my files elsewhere (mirroring) is not appreciated. If you need to add my files elsewhere, just post the link to my goo.im account.
* Progress:
Almost everything works, it needs some minor changes. Release very soon.
* Notice:
Key layout is a little different than in CWM5, so don't freak out.
* How to flash:
Flash via odin v1.85 in PDA column.
Special thanks to FrOz3n for helping me with testing!
Click to expand...
Click to collapse
All of the thanks goes to you, our beloved developer
Re: [DEV] ClockWorkMod 6 - coming soon
thanks for you two
keep it up
Sent from my GT-S6500D using xda premium
What benefif from cwm6
Google CWM6 changelog.. mostly super fast backup/restore
TheWhisp said:
Google CWM6 changelog.. mostly super fast backup/restore
Click to expand...
Click to collapse
And faster installing ROM, I've flashed CM10 in hmmm 20 sec ?! idk but faster than with CWM5. And it let you install zip via ADB(still untested) I'm going to test it now.
PS>
The recovery builder is now building version 6 of the recovery. The main changes are as follows:
Backups are much faster. 4-5x faster. (Bug fix due to excessive status updates of the UI and new backup technique)
Incremental backups are smaller. Way way smaller. Only 15-20MB each for each additional backup of a ROM. This is done using a new tool I wrote to dedupe the files between incremental backups to eliminate duplicates.
Read more at http://techie-buzz.com/android/cwm-...ler-nandroid-backups.html#6K7Mss6UKbjEK3lO.99
Click to expand...
Click to collapse
Re: [DEV] ClockWorkMod 6 - coming soon
awesome
Sent from my GT-S6500D using xda premium
Ynt: [DEV] ClockWorkMod 6 - coming soon
Thats good. Especially taking nandroid backups are taking ages to complete or restore.. thanks for everything.
GT-S6500 cihazımdan Tapatalk 2 ile gönderildi
Sweet and useful info for all Mini2 users
EDIT: TheWhisp should this CWM be touch or classic version?
Sent from my ZTE Blade III.
midzan21 said:
Sweet and useful info for all Mini2 users
EDIT: TheWhisp should this CWM be touch or classic version?
Sent from my ZTE Blade III.
Click to expand...
Click to collapse
Why touch !? In my opinion that would bring you only fail menu touches so its a no from me for the touch verzion..
Re: [DEV] ClockWorkMod 6.0.2.8 - coming soon
Wow good job i can't wait to try it. Is the recovery loop exist?
Sorry for my bad english
rianrazan said:
Wow good job i can't wait to try it. Is the recovery loop exist?
Sorry for my bad english
Click to expand...
Click to collapse
Haven't run into it yet.
For the installation over sideload, I confirm IT WORKS. Thank you TheWhisp
You just setup the android SDK, install ADB tools, download your favourite ROM (currently mine is CM10 xD) and install it over ADB.
What does Install update via sideload do?!
You don't have to put your rom or flashing .zip file in your phone or SD card.
If you have it in your downloads folder (in linux) you just connect your phone to sideload on CWM6 and write in terminal (on your PC)
"adb sideload <.zip_file_path>" and you have it
Example. You have update.zip file in your downloads folder, so you write
adb sideload ~/Downloads/update.zip
So yah, i tried it, and as I said, it works falwlessly
PS. There are like NO bugs so I think this is going to be released tomorrow or so. Let's see what TheWhisp thinks
Re: [DEV] ClockWorkMod 6.0.2.8 - coming soon
Will it be compatible with existing flashable zip files? The whisp has been working hard for s6500. Thanks.
Sent from s6500d with custom ROM and kernel.
bhree said:
Will it be compatible with existing flashable zip files? The whisp has been working hard for s6500. Thanks.
Sent from s6500d with custom ROM and kernel.
Click to expand...
Click to collapse
It's compatible with all .zip files I have tried yet. It doesn't matter which zip file you try, it should work as long as the zip file worked in the previous CWM5.
cant wait for it...now its free from cwm loop .
Great news!!!! I'm very happy! Fast backup and fast restore!!! Ohh yeah! Thanks Whisp!
our beloved dev thewhisp really makes the Galaxy Mini 2 alive..
CM10+CWM really good.
and again... Ace Plus users ask me for help, I fix their kernel, they use my Mini 2 config, rename every jena to trebon and can't include me in the credits. Hate people like that. :/
TheWhisp said:
and again... Ace Plus users ask me for help, I fix their kernel, they use my Mini 2 config, rename every jena to trebon and can't include me in the credits. Hate people like that. :/
Click to expand...
Click to collapse
don't ever help 'em anymore sir
people like 'em never learned a lesson ..
It kind of feels sad when you do something in your free time and someone just takes your work and say it's his. Anyway, release in an hour.
Disclaimer: I take no responsibility for bad things that may occur as a result of flashing this.
NOTE: If coming from 10.1, make a back up first as you will not be able to flash back to 10.1 unless you factory reset
These are Official CM 10.2 builds for the Galaxy Note 8.0 N5110
Prereq: Unlocked Bootloader
It is recommended to flashed this in CWM .
Source: http://github.com/CyanogenMod
Instructions:
-Download and copy rom to sdcard
-Download and copy gapps to sdcard (make sure they are for 4.3!)
-Reboot into recovery (CWM)
-Flash rom
-Flash gapps
-Wipe data/cache
-Reboot
Known Bugs:
-BT voice search
ROM: http://download.cyanogenmod.org/?device=n5110
****** All links below this are UNOFFICIAL builds ******************
[8/1]ROM: http://www.androidfilehost.com/?fid=23060877489997662
Changes:
- Initial Release
[8/27] ROM: http://www.androidfilehost.com/?fid=23060877490002894
Changes:
- Upstream CM changes
[9/12] ROM: http://www.androidfilehost.com/?fid=23134718111252562
Changes:
- Fixed graphical glitches / black screens
- Upstream CM changes
[9/20] ROM: http://www.androidfilehost.com/?fid=23134718111254117
Changes:
- changed to tvdpi (fixes icon blur)
- Upstream CM Changes (including netflix fix!)
[10/08] ROM: http://www.androidfilehost.com/?fid=23159073880934700
Changes:
- Boost speaker volume slightly
- Add opensource camera (fixes front cam freezing)
- Upstream CM Changes
[10/10] ROM: http://www.androidfilehost.com/?fid=23159073880935566
Changes:
- Updated to 4.3.1
- Add IRDA service/support (needs testing)
- Opensource Sensors (fixes incorrect light_sensor reading really high instead of 0 or -1)
- Correctly read Wifi mac address
- Charging tweaks (need charging speed tested)
[10/14] ROM: http://www.androidfilehost.com/?fid=23159073880936401
Changes:
- Upstream CM Changes
- Fix Haptic feedback for back/menu keys
- Fix screen staying on while tablet is off and charging
[10/23] ROM: http://www.androidfilehost.com/?fid=23189362627840660
Changes:
- Upstream CM Changes
- Fix magnetic cover support (turn on/off screen)
- Fix Bluetooth (99% sure this is good, can anyone else confirm?)
- Fix wifi mac address again (should be good for sure now)
please make for N5100 :crying:
thanks for this, Scott!
Can we use the 0301 Gapps?
Must use 4.3 gapps. Google them, they're out there.
thats what I thought..I have the PA gaaps. which are 4.3, so I will try them
thanks
EDIT: found the non pa gapps, so gonna use them..thanks again!
Thanks for the build.
One question: Is the source in your 10.2 branch current? I see last update 9 days ago and I'd like to fork it for my own try.
Gesendet von meinem GT-N5100 mit Tapatalk 4
Anyone having any luck with this rom? I downloaded it twice, clean install, etc... Everything force closes for me. Can't even type because the keyboard FC, the back button won't work, the top bar is all out of whack.
works perfectly for me..make sure you use 4.3 gaaps, and fully factory wipe before flashing
wase4711 said:
works perfectly for me..make sure you use 4.3 gaaps, and fully factory wipe before flashing
Click to expand...
Click to collapse
Yup, full wipe and PA 4.3 gaaps. Maybe I'll give it another go in a bit. I've got a good set up going as is, so even if I can't get it working it's not a huge deal.
dont use PA gapps, use plain 4.3 gaaps..
get them here
http://d-h.st/6Oz
wase4711 said:
dont use PA gapps, use plain 4.3 gaaps..
get them here
http://d-h.st/6Oz
Click to expand...
Click to collapse
Tried with no gapps and had no luck. Maybe just a bad download, although I did d/l twice.
edit - downloaded the rom one more time and installed the PA 4.3 gapps and all is well. Third time was the charm.
sbrissen said:
Disclaimer: I take no responsibility for bad things that may occur as a result of flashing this.
NOTE: If coming from 10.1, make a back up first as you will not be able to flash back to 10.1 unless you factory reset
These are Unofficial CM 10.2 builds for the Galaxy Note 8.0 N5110
Prereq: Unlocked Bootloader
It is recommended to flashed this in CWM .
Source: http://github.com/sbrissen
Instructions:
-Download and copy rom to sdcard
-Download and copy gapps to sdcard (make sure they are for 4.3!)
-Reboot into recovery (CWM)
-Flash rom
-Flash gapps
-Wipe data/cache
-Reboot
Does this ROM really work? Tried downloading twice and from different mirrors but always get error during installation and it 'Aborts ...'.
I would have loved to give it a try though.
Click to expand...
Click to collapse
how long does it take / how difficult is it to compile these Roms? would love to help out development if I could figure out how to do it.
ddye said:
sbrissen said:
Disclaimer: I take no responsibility for bad things that may occur as a result of flashing this.
NOTE: If coming from 10.1, make a back up first as you will not be able to flash back to 10.1 unless you factory reset
These are Unofficial CM 10.2 builds for the Galaxy Note 8.0 N5110
Prereq: Unlocked Bootloader
It is recommended to flashed this in CWM .
Source: http://github.com/sbrissen
Instructions:
-Download and copy rom to sdcard
-Download and copy gapps to sdcard (make sure they are for 4.3!)
-Reboot into recovery (CWM)
-Flash rom
-Flash gapps
-Wipe data/cache
-Reboot
Does this ROM really work? Tried downloading twice and from different mirrors but always get error during installation and it 'Aborts ...'.
I would have loved to give it a try though.
Click to expand...
Click to collapse
its been on my tablet since 8-1, working fine with no problems
are you rooted? what recovery are you using?
Click to expand...
Click to collapse
Please make it for N5120. :fingers-crossed:
wase4711 said:
ddye said:
its been on my tablet since 8-1, working fine with no problems
are you rooted? what recovery are you using?
Click to expand...
Click to collapse
I have CWM and rooted. I once tried the 4.2.2 leak and went very well but reverted back to stock for stability and usability.
What is your overall assessment of CM 10.2 on our tablet (5110)?
Many thanks
EDIT: The OP says 'Unlocked Bootloader', is that so?
Click to expand...
Click to collapse
wase4711 said:
ddye said:
its been on my tablet since 8-1, working fine with no problems
are you rooted? what recovery are you using?
Click to expand...
Click to collapse
No graphical glitches or black screens?
Click to expand...
Click to collapse
hermeticist said:
wase4711 said:
No graphical glitches or black screens?
Click to expand...
Click to collapse
havent noticed any yet
---------- Post added at 08:41 AM ---------- Previous post was at 08:40 AM ----------
ddye said:
wase4711 said:
I have CWM and rooted. I once tried the 4.2.2 leak and went very well but reverted back to stock for stability and usability.
What is your overall assessment of CM 10.2 on our tablet (5110)?
Many thanks
EDIT: The OP says 'Unlocked Bootloader', is that so?
Click to expand...
Click to collapse
as long as you are rooted, you can install with no problems
Click to expand...
Click to collapse
Click to expand...
Click to collapse
I installed 10.2 and 4.3 gapps and all seemed find until I ran titanium backup.
It couldn't get root access
try installing busybox, then reboot
Earlier, I have been compiling several ROMs for the galaxy tab (P7510/p4wifi) based on KitKat 4.4. I now decided to move over to OMNI ROM as base: http://omnirom.org/
The nice thing of OMNI in my personal opinion is smoothness: it is relatively low in features, but at the same time it is not that resource hungry as some other ROMs. The end result is a smooth ROM.
Changelog of 15-Feb-2014
-Omni codebase of 14-Jan
Several small fixes, nothing spectecular
It features the Infamous kernel (same kernel as for JB4.3, without SELinux). The zram code has been optimized (based on google advice for low-RAM devices) and is enabled by default.
To see the additions on top of Omni, check github (additional patches are always shown on top):
Frameworks
Settings
OmniGears
First installation:
-Boot into recovery
-Factory reset
-Wipe system partition
-Install ROM
-Boot tablet (there sometimes are bootloops if gapps is flashed directly on top of the ROM without first booting the ROM)
-Reboot recovery
-Install SuperSU: http://download.chainfire.eu/371/SuperSU/UPDATE-SuperSU-v1.85.zip
-Install gapps (you should use a package specifically for KK4.4 and with the old-fashioned updater-script! - don't worry if you install an outdated gapps packages with the correct updater-script, as long as it is for KK4.4 the apps in the gapps package will be automatically updated -> only small gapps packages fit, e.g. banks core of pa 0-day gapps mini)
-Boot it up
-> some people report issues (e.g. bootloop or crashing gapps) if they flash ROM, gapps & supersu in a row after fully wiping the tablet. In that case, wipe again, flash ROM, boot the tab, reboot to recovery, and then flash the rest.
-> if coming from stock ROM, a factory reset may wipe you entire /data partition, so you loose you sdcard contents as well (I think this only happens with CWM, but I'm not sure)
-> in CWM "wipe system partition" can be found under mounts, and is called "format /system"
->If you get the message 'This package is for "p4" devices this is a "GT-P7500"' (or something likewise) update to a recent CWM or TWRP
Update installation (OMNI -> OMNI):
-Boot into recovery
-Install ROM
-Install SuperSU (in the SuperUser app you can create a script that will automatically backup/restore SuperSU on ROM updates so you don't have to reflash SuperSU).
-Boot it up
You can download any gapps packages for kitkat that you like, but one that many have used successfullyis PA 0 day gapps:
http://forum.xda-developers.com/showthread.php?t=2397942
Downloads:
P4WIFI:
http://rootaxbox.no-ip.org/kasper_h/roms/p4wifi/omni44/
P4:
http://rootaxbox.no-ip.org/kasper_h/roms/p4/omni44/
Credits:
OMNI team for the code
AAccount for his help along the way to get KK4.4 to compile for our aging device!
pershoot for the basis for the device trees & kernel base
Code:
Basis of OMNI code: https://github.com/omnirom/
Common p4 device tree: https://github.com/kasperhettinga/android_device_samsung_p4-common
Device tree p4wifi: https://github.com/kasperhettinga/android_device_samsung_p4wifi
Vendor blobs p4wifi: https://github.com/kasperhettinga/android_vendor_samsung_p4wifi
Device tree p4wifi: https://github.com/kasperhettinga/android_device_samsung_p4
Vendor blobs p4wifi: https://github.com/kasperhettinga/android_vendor_samsung_p4
What does NOT work?
-There are graphical glitches. Although they mainly have been solved there seem to be some remaining issues with hwcomposer that may crash the tab.
-Bluetooth audio does not work (other Bluetooth functions do work).
-HDMI output (may be fixed according to some posts, didn't test myself yet)
-HD movies (in e.g. youtube) may stutter
Smoothness advice:
Go to performance settings:
-Overclock CPU to 1400MHz (Do this at your own risk!)
-Set IO scheduler to CFQ
-Keep governor on Interactive
Go to developer settings:
-Set the three animation scale options to 0.5x
-Activate "Force GPU rendering"
-Active "Disble HW-overlays"
-Set background process limit to 4 processes
(if performance/developer options are not yet shown, go to settings>about and press build number 7 times)
-> Thanks to all forum members contributing to this list
-> Do it at your own risk!
-> Don't complain about limited battery life (ROW+interactive+1000MHz leads to better battery life for sure)
Some other tips:
-For improvement of sound quality, you can use Viper4Android
-For more volume only, SpeakerBoost is earier to use
-For netflix, head over here: http://forum.xda-developers.com/showpost.php?p=49208063&postcount=445
-To be able to use Flash player, use a browser that doesn't use the kitkat browser engine (e.g. firefox can be used). Download flash player from adobe website (thanks to AAccount for finding out!).
- If you can't see your internal SD on PC: Go to Settings -> Storage -> 3 dot menu -> tick MTP.
-To use the multi-window feature, go to the recent apps screen, press&hold an app, and select put aside.
Great......downloading now
Sent from my GT-N7000 using Tapatalk
p4
is there any p4 version in progress br zezam?
Nice work :good:
you will get version and for the P7500 ?
kasper_h said:
Reserved
Click to expand...
Click to collapse
i'm new to Galaxy tab 10.1..LOL,,, can this ROM be installed directly from Stock ROM with TWRP,,,Please help ASAP
zezam67 said:
is there any p4 version in progress br zezam?
Click to expand...
Click to collapse
paiktaras said:
Nice work :good:
you will get version and for the P7500 ?
Click to expand...
Click to collapse
Kasper already said that he won't be building for the p4.
Looks like my P7500 is gonna be a P7510 soon..
BTW, we still need to flash supersu zip?
Sent from my GT-P7500 using Tapatalk HD
Xenodrome_ said:
i'm new to Galaxy tab 10.1..LOL,,, can this ROM be installed directly from Stock ROM with TWRP,,,Please help ASAP
Click to expand...
Click to collapse
Just wipe everything and flash the ROM.
eushaun99 said:
Kasper already said that he won't be building for the p4.
Looks like my P7500 is gonna be a P7510 soon..
BTW, we still need to flash supersu zip?
Sent from my GT-P7500 using Tapatalk HD
Click to expand...
Click to collapse
You need to separately flash SuperSU. SuperSU can create a script for backing it up, so that on future ROM flashes you don't have to repeat this.
oooppppsss the ROM can not be installed in a P4
Hi,
I have tried to install the ROM in a P4 and I receive an error saying "this device is a P4 and the ROM can not be installed"
esfjrg1 said:
Hi,
I have tried to install the ROM in a P4 and I receive an error saying "this device is a P4 and the ROM can not be installed"
Click to expand...
Click to collapse
Doh, its a p4wifi ROM. If you don't use 3g, flash a p4wofi recovery first, reboot, and flash again.
Sent from my GT-P7500 using Tapatalk HD
esfjrg1 said:
Hi,
I have tried to install the ROM in a P4 and I receive an error saying "this device is a P4 and the ROM can not be installed"
Click to expand...
Click to collapse
Flash P4wifi recovery, Then flash this ZIP again
Bad to see that it is really not for the GT-P7500 . So i will not update.... i really need my 3G
Why it is so difficult to get 3G working Did 4.4 change so much?
Traace said:
Flash P4wifi recovery, Then flash this ZIP again
Bad to see that it is really not for the GT-P7500 . So i will not update.... i really need my 3G
Why it is so difficult to get 3G working Did 4.4 change so much?
Click to expand...
Click to collapse
The problem is that in 4.4 the radio stuff has been redone. I also had problem with another device I develop for (SGS) to get the radio to work. And to develop a ROM for a device I don't own make it even more complicated. In the past weeks I sometimes flashed 10-15 testbuilds on a single day to try and fix something simple (like USB OTG). If someone else would test something for me, the progress would be way too slow.
But all my code is open source: someone with a p7500 can just grab all the code, adapt it to p7500 and compile it. And start the whole process of fixing bugs
I get a unfortunately, setup wizard has stopped error and can not pass it.. Anything to work around it?
Sent from my SPH-L720 using xda app-developers app
@kasper_h As you might awared, YouTube is broken. It ran the same problem at that time with my GT-N7000 with OMNI 4.4, they managed to fix it. Maybe you can check with herna on that thread.
So far so good running ART
Sent from my GT-N7000 using Tapatalk
I also get the com.google.process.location has stopped error but I can pass that one..
Sent from my SPH-L720 using xda app-developers app
kasper_h said:
First installation:
-Install gapps (you can download any gapps package you like, as long as it is specifically for JB4.3!)
Click to expand...
Click to collapse
Is there a difference between 4.3/4.4 gapps?
Sent from my myTouch 4G using Tapatalk
Chris4809 said:
I get a unfortunately, setup wizard has stopped error and can not pass it.. Anything to work around it?
Sent from my SPH-L720 using xda app-developers app
Click to expand...
Click to collapse
Which gapps package? I flashed ROM & gapps myself today as well, just to test it once more. And it works flawlessly.
rogconnect said:
@kasper_h As you might awared, YouTube is broken. It ran the same problem at that time with my GT-N7000 with OMNI 4.4, they managed to fix it. Maybe you can check with herna on that thread.
So far so good running ART
Sent from my GT-N7000 using Tapatalk
Click to expand...
Click to collapse
Youtube is a problem with some hardware blobs I believe. I had the same on AOKP. I have spend a lot of time, but could never solve it. I decided to ignore it
Chris4809 said:
I also get the com.google.process.location has stopped error but I can pass that one..
Sent from my SPH-L720 using xda app-developers app
Click to expand...
Click to collapse
jaibar said:
Is there a difference between 4.3/4.4 gapps?
Sent from my myTouch 4G using Tapatalk
Click to expand...
Click to collapse
Yes, you should only use kitkat (4.4) gapps!
kasper_h said:
Which gapps package? I flashed ROM & gapps myself today as well, just to test it once more. And it works flawlessly.
Youtube is a problem with some hardware blobs I believe. I had the same on AOKP. I have spend a lot of time, but could never solve it. I decided to ignore it
Yes, you should only use kitkat (4.4) gapps!
Click to expand...
Click to collapse
If it is 4.4 gapps you might want update the OP.. It is telling us that we should use 3.4
Sent from my SPH-L720 using xda app-developers app
After enabled ART on first boot then rebooted. And then rebooted to recovery to install Banks 12-14_GApps_Core_4.4.2_signed.zip.. then I can signed in Google...so far no FC on Google apps.
Sent from my GT-P7510 using Tapatalk
I'm getting the "setup wizard has stopped" error also.
Coming from pac_P4wifi_4.3-Infamous_20131114
Followed install instructions.
Used gapps-jb-20130813-signed
Cannot find gapps for 4.4. The 20130813 (4.3) package seems to be the most current.
Hello guys!
After learing a lot from these great devs arround here i decided to start to try out a new project! Multirom!!
You might or might not have heared of it, THE multi-boot mod for the Nexus 7. I found it and have decided to port it for our device.
First of all, it is a very initial release now. Though I have tested multiple cases and didn't find any problem except those in the bug list, bugs can arise. Do have a backup! Also, do read through the whole OP and 2nd post! If you don't understand something, rather read again and/or ask!
For more information on how it works and what it does, I suggest that you read the first few posts in the original thread. Those are very detailed and well-written posts that explain MultiROM in general. Installing roms to USB and Ubuntu/Ubuntu Touch of course doesn't work for our device atm.
Installation
The device must not be encrypted!
You need to flash the modified TWRP recovery that has MultiROM extensions. My version is based on the latest sources with gordon0001's device-specific modifications included. You can keep this recovery if you don't want to use MultiROM anymore and you like TWRP, because the MultiROM extensions don't interfere with other functions, even if the boot sector is not injected.
You have to flash a kernel that is capable of Kexec-hardboot.
Links
You can find everything at https://www.androidfilehost.com/?w=files&flid=32204.
multirom-20150521-v32-UNOFFICIAL-p880.zip : The multirom zip
CM12_Kernel_Patched.zip : CM 12 Kernel with Kexec-Hardboot Patch ; Thanks to @Adam77Root the patch and @laufersteppenwolf for building Kernel
multirom_uninstaller.zip : Selfexplaining
Known Bugs
-Reboot to recovery doesn't work.
-UI has some graphical bugs
-Double Press to boot Secondary Rom doesnt work -> Press twice on the Rom you want to boot and press Powerbutton at the same time till you recoginze a vibration
-You tell me more
Changelog
23 May 2015: Initial release
Credits
@Tasssadar for MultiROM, Kexec-hardboot for Nexus 7 and his help with debugging and porting
@Adam77Root for Thread Content
XDA:DevDB Information
[MOD][23 MAY] MultiROM v32, Tool/Utility for the LG Optimus 4X HD
Contributors
fritzcola
Version Information
Status: Testing
Created 2015-05-23
Last Updated 2015-05-24
Explanation
In the next two examples, I will refer any official, unofficial, or CM-based roms as CM. Keep this in mind.
I use the word 'injected', because MultiROM is actually injected into the boot partition. It works on any kernel that is capable of doing Kexec-hardboot (and if you don't want to use different kernel (i.e. you will use kernel sharing), it will work on unpatched kernels as well).
I may refer to non-shared kernel method as Kexec(-hardboot) method
Example scenario of multi-booting CM with CM and kernel sharing
You are on CM with MultiROM-capable recovery, patched kernel and MultiROM-injected and you want to install e.g. CarbonRom as second.
Boot into TWRP, navigate to Advanced->MultiROM and select 'Add ROM'. Since the base rom is CM, you can share the same kernel. It will be faster as there will be no hardboot needed.
The installation steps are easy and it doesn't take more time than a normal installation.
Example scenario of multi-booting CM with CM and different kernel
You are on CM with MultiROM-capable recovery, patched kernel and MultiROM-injected and you want to install e.g. CarbonRom as second.
Boot into TWRP, navigate to Advanced->MultiROM and select 'Add ROM'. Select 'Don't share'.
Continue with installation.
Now, since the target kernel (that is installed with the rom) is very likely not patched, you will have to flash one of my linked kernels to that rom. Do this by selecting 'List roms', selecting the desired rom, than 'Flash ZIP' and flashing one of the kernels I have patched.
You can only share kernels if you are on the same Android version for example 5.0.x!
Source Codes:
Tree
Any screenshot? I didn't understand the ui bugs. What are they ? Great work fritzcola I will install my device when ui bugs are solved
CrazyWinner said:
Any screenshot? I didn't understand the ui bugs. What are they ? Great work fritzcola I will install my device when ui bugs are solved
Click to expand...
Click to collapse
Look here! https://www.dropbox.com/s/whor0zf6xx7z4jh/VID_20150523_234854.mp4?dl=0
fritzcola said:
Look here! https://www.dropbox.com/s/whor0zf6xx7z4jh/VID_20150523_234854.mp4?dl=0
Click to expand...
Click to collapse
Ow it's no problem for me Installing now , great work !
thanks
its work good
HI @fritzcola i have this bugs
after flash kernel
system ui has stopped on Euphoria rom
sim internet not work on ResurrectionRemix+BlissPop rom
some rom need to disable sim (plane mod )or it got bootloop from home screen PAC-ROM LP rom
work before but now i have this.
many times when add lolipop rom in multiboot i get error
blkdiscrad faild: operation not supported on transport endpoint
e:error executing updater binary in zip '/tmp/mr_update.zip
faild to install zip
thanks
mater2 said:
HI @fritzcola i have this bugs
after flash kernel
system ui has stopped on Euphoria rom
sim internet not work on ResurrectionRemix+BlissPop rom
some rom need to disable sim (plane mod )or it got bootloop from home screen PAC-ROM LP rom
work before but now i have this.
many times when add lolipop rom in multiboot i get error
blkdiscrad faild: operation not supported on transport endpoint
e:error executing updater binary in zip '/tmp/mr_update.zip
faild to install zip
thanks
Click to expand...
Click to collapse
That error with executing bla bla bla is rom related!
I already have TWRP 2.8.6.0 installed. To use your MultiROM Mod do I just need to flash MultiROM zip? Or do I need to flash recovery img (I found in your link)?
Will the uninstall zip send me back directly to the Stock TWRP 2.8.6.0?
__________________________________________
It works. But I'm getting the same problem as @mater2.
"error executing updater binary in zip '/tmp/mr_update.zip";
I tried latest BlissPop 3.4 and Euphoria 1.1.
If it is ROM related how can we solve it?
I saw some users reporting the same problem with the Nexus 5. They said the problem was on the "updater-script" of the ROM.
Thanks for your work and attention.
Enviado de meu Optimus 4X HD usando Tapatalk
gugu6897 said:
I already have TWRP 2.8.6.0 installed. To use your MultiROM Mod do I just need to flash MultiROM zip? Or do I need to flash recovery img (I found in your link)?
Will the uninstall zip send me back directly to the Stock TWRP 2.8.6.0?
__________________________________________
It works. But I'm getting the same problem as @mater2.
"error executing updater binary in zip '/tmp/mr_update.zip";
I tried latest BlissPop 3.4 and Euphoria 1.1.
If it is ROM related how can we solve it?
I saw some users reporting the same problem with the Nexus 5. They said the problem was on the "updater-script" of the ROM.
Thanks for your work and attention.
Enviado de meu Optimus 4X HD usando Tapatalk
Click to expand...
Click to collapse
1. Create backup from primary rom
2. Wipe everything and install rom you want as secondary as primary
3. Make backup from Primary you want to have as secondary
4. Use option to add rom to MR with Backup
5. Restore backup from old Primary
Are iodak and werewolf supporting multirom ?
@fritzcola
@gugu6897
strange thing its work for me all roms i can multiboot after some days and try some roms except euphoria because its not work with patched kernal after that
the error Shows up i try to format every thing internal +cache+davlik
doesn't fix that .
its allow to add 4.4.4 or 4.1.2 rom but 5.0x didn't
thanks for your good work
CrazyWinner said:
Are iodak and werewolf supporting multirom ?
Click to expand...
Click to collapse
I tried Werewolf kernel. The answer is no [emoji17].
Enviado de meu Optimus 4X HD usando Tapatalk
@gugu6897 @CrazyWinner
the kernel in this post (patched kernel) only can used for multiboot.
when use patched kernel
maybe you will have bug with sim internet with all roms except blissbob.
every thing else work good
@CrazyWinner, looks like iodak (and mourta too) has kexec-hardboot, but my secondary ROM (MIUI v5) don't boot. I double tap it, but the device just power off.
Does someone know any ROM that works with MultiROM?
Enviado de meu Optimus 4X HD usando Tapatalk
Look at Known Bugs in post #1
Sent from my A0001 using XDA Free mobile app
fritzcola said:
Look at Known Bugs in post #1
Sent from my A0001 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks, I forgot about that [emoji28].
Enviado de meu Optimus 4X HD usando Tapatalk
progress
is it 'save' and will you update this anytime soon??
an update to MultiROM v33 - MultiROM TWRP 3.0.0-1 would be amazing
Extractor 2.4 from @Alexey71
derders said:
an update to MultiROM v33 - MultiROM TWRP 3.0.0-1 would be amazing
Click to expand...
Click to collapse
+1
I just discover the win tool Extractor 2.4 from @Alexey71 , as I didn't succeed to get finish compiling mmb 5.1.1.37 (or 29), I played with @csk1jw 2xAosp LP &MM system.new.sdat:
http://forum.xda-developers.com/showpost.php?p=57742855&postcount=42
extraction + re-zip(boot.img+file_contexts +/system/) in @laufersteppenwolf Nameless 5.1.zip + twrp’ add 2nd multirom + reboot and IT JUST WORKS!
I can now multiboot, WITH Nameless 5.1 AS PRIMARY: mmb 5.1 as 2nd+
cm11+OEMlg JB (+ BlisspopLP+ crdoidLP).
Many thanks to native kexeced Nameless’ kernel for LP!
Unfortunately’ the re-zipped aosp MM did not boot (boot.img conflict? or primary slot required with kexec.. or I miss more).
I believe there won’t be any future update on mmbLP, so it will be good if, @csk1jw or @MoltenMotherBoard or @streambinder could make an old_fashion-zipped official ultimate edition to be used with gorgeous @fritzcola ’ multirom 2.8.6 .
Also if they explain me how to bake it, patched with microG, i try wakelockblocker's patch for a better battery control in ‘pure’ FLOSS.
I still hope that, in this combination, some could give a try to my infamous nightly-cm11+3; while waiting for a snappy MM snapshot...
http://forum.xda-developers.com/and...kelock-blocker-official-2016-nightly-t3393825
Basics multirom tips;
-If you think something is wrong, like battery drain or excessive reboot: in twrp menu go to advanced menu then fix permissions and re-flash multirom32 on primary rom before rebooting;
-Always use ext sdcard for twrp’s copy-backup and avoid using twrp’s File Manager to restore, otherwise they could be buried and waste your mem until a complete re-format; if needed: boot in primary rom (or install a rom ZIP!) and copy them to sdcard/twrp/backup/IdDevice… with your favorite apk.
-For better efficiency use native kexeced Nameless 5.1 for primary rom.
Actually I don’t know if mmb5.1 is 100% compatible with @laufersteppenwolf ‘s Nameless 5.1_kernel.
Be aware that the smell of night roasted marshmallows is scientifically attracting werewolves.