TPT ICS NANDROID Backup (rooted w/superuser - completely virgin) and other goodies!! - Thinkpad Tablet Android Development

Hey hey XDA! (ignore the account name, I was 13 years old when I first joined XDA in like '08)
My father bought a refurbished TPT from TigerDirect and literally nothing worked. I factory wiped it and tried to update it so I could get the cameras working and other such things - but no luck. I started to crawl my way through the internet but neither Lenovo nor anybody else seemed to have the answers. I thought that since I was failing the SHA1 hash checks that I might as well start replacing the files and see where it gets me. Five hours later:
First try to restore my ICS nandroid backup, but if not, follow the mini-guide below! Also look at the end of the post for all my files!
For those of you that can't update because you're failing assertion checks:
Root your current version with one of the root tools in my package. Go to your advanced properties and see which Lenovo internal version you're running "0089, 0075, 0060, etc". There are three toolkits that I included and they all work; use the one for your version.
Flash the Ventana CWM.
Do a nandroid restore through CWM by going to backup->restore. It's going to wipe and install a clean 0075 Honeycomb build.
Root again, the pre 0089 package should be a relatively easy root to do.
Restore the factory recovery. I have one fresh from my tablet and one that I found floating around on the internet. You could use either (the one floating around worked fine for me, but if you want something 'newer' just use mine).
Connect to a WiFi network and check for updates. This is the part where it might get tricky. Not all of the files in the 0075 build that I attached were original (it wasn't my build, not my fault). If you get an assertion check, look at your error and see which file has failed. I only had to replace three files, gps.conf, Generic.kl, and the busybox binary. This theoretically should be the same for you. Try to update without replacement, and as the updates start to fail replace the files that are causing failure. The ones you need are attached in my bundle, but I have others too - so let me know if you'll need them!
By this step you should be on the ICS update. Root using the debugfs kit (in the ICS folder for rootkits) and then flash Koshu's recovery (which only worked for me on ICS). Do a backup. Live a happy life.
This procedure isn't meant to be very 'easy'; I am just attempting to make your inconsistencies match mine so they can be fixed in the same manner. A quick Google search showed me that a lot of people are missing different files with barely any files available. Everything I have was extracted from official packages from previous versions. I think I managed to 'get lucky'.
You can find everything that you need on my website. I won't ever take this down save for a plane crashing into the datacenter where it's hosted. There are copies of all the files I mentioned in this tutorial and even copies of Lenovo's official updates since their servers go down more than Kim Kardashian.
Go to http//davidstancu.me/TPT
I'm also working on a small Android app to replace these files to the factory files (kind of like the way Windows has sfc /checknow or whatever that command is. I would also like to extend a massive thank you to everybody who made the tools that I used to get this done.
Since my account doesn't have 10 posts yet I can't post a link, so you'll have to manually include the colon. Sorry

What is your tablet version? US? ROW?
I am looking for 16 US version.

i have inadvertantly deleted my original ics files when upgrading to Koshu's JB. I need to restore the stock ics so would like to use your cwm restore files.I've downloaded the files but the md5 check doesn't work.I assume it's only because i need the actual name of the folder these files are saved in the cwm backup folder. can you please either post it or email it?

smiley1960 said:
i have inadvertantly deleted my original ics files when upgrading to Koshu's JB. I need to restore the stock ics so would like to use your cwm restore files.I've downloaded the files but the md5 check doesn't work.I assume it's only because i need the actual name of the folder these files are saved in the cwm backup folder. can you please either post it or email it?
Click to expand...
Click to collapse
'
don't worry. I just created a new blank nandroid.md5 file and it took.Unfortunately, my TPT would not boot up. It just stuck at the Lenovo logo. Any suggestions to get it working?

My guess is that a file was corrupted. Try redownloading?

Thank you so much for the detailed guide and the files! My TPT came with a strangely named bladenct...0037_0001 (US) firmware so I couldn't have updated to ICS otherwise.
In other words, confirmed working for a US 16GB TPT. :good:

BrazenRain said:
Thank you so much for the detailed guide and the files! My TPT came with a strangely named bladenct...0037_0001 (US) firmware so I couldn't have updated to ICS otherwise.
In other words, confirmed working for a US 16GB TPT. :good:
Click to expand...
Click to collapse
Based on that version number I'm curious... is that a TPT from Tigerdirect? Is the model number 1839AJ6 or 1839AD7?

US vs ROW
da_reeseboy said:
My guess is that a file was corrupted. Try redownloading?
Click to expand...
Click to collapse
Damn.I justchecked the build.prop and the ICS nandroid backup is for a US version. I've got a ROW version.
Anyone out there got an ICS nandroid ROW backup I can use? I'd really appreciate the help.

smiley1960 said:
Damn.I justchecked the build.prop and the ICS nandroid backup is for a US version. I've got a ROW version.
Anyone out there got an ICS nandroid ROW backup I can use? I'd really appreciate the help.
Click to expand...
Click to collapse
Maybe this can help you - http://forum.xda-developers.com/showthread.php?p=37330646#post37330646

da_reeseboy said:
Based on that version number I'm curious... is that a TPT from Tigerdirect? Is the model number 1839AJ6 or 1839AD7?
Click to expand...
Click to collapse
I bought it second-hand (and it seems to have had quite a rough life as is cut out for a ThinkPad), but it's an 1839AD7.

BrazenRain said:
I bought it second-hand (and it seems to have had quite a rough life as is cut out for a ThinkPad), but it's an 1839AD7.
Click to expand...
Click to collapse
Thanks for the reply. I am trying to help another member get his up to ICS, and he has the same weird software version. Did you restore the nandroid or follow the mini guide?

I used the mini guide. Unlike the original poster, I found nothing broken in the stock software. The rear camera has some serious magenta artifacts on the side but that remained in ICS and CM10 so I'm guessing that's hardware damage. (This tablet seems to have been through a lot. Thus I got it at a reasonable price from ebay.)

Awesome! Thanks again for replying.

Related

[ROM] 3 uk nandroid backup

Here is a clean nandroid backup as from factory of a 3 uk rom.It has all 3 uk apps,my 3 etc.
It is version-
2.1 update1
Baseband- 13.45.55.24H_3.35.15.31
Kernal- 2.6.29-4266b2e1
Build no.- 1.16.771.3 CL186175
Software number- 1.16.771.3
I have seen a few posts asking for this so thought i would post it.
There is NO personal information in this.
http://rapidshare.com/files/422526908/2010-09-26.18.35.51.rar
Copy the file to clockworkmod/backup on your sd card and boot in to recovery, and select nandroid restore.
tigger69 said:
Here is a clean nandroid backup as from factory of a 3 uk rom.It has all 3 uk apps,my 3 etc.
It is version-
2.1 update1
Baseband- 13.45.55.24H_3.35.15.31
Kernal- 2.6.29-4266b2e1
Build no.- 1.16.771.3 CL186175
Software number- 1.16.771.3
I have seen a few posts asking for this so thought i would post it.
There is NO personal information in this.
http://rapidshare.com/files/422507599/Wildfire__3uk__Backup__as_frm_factory_.zip
Copy the file to clockworkmod/backup on your sd card and boot in to recovery, and select nandroid restore.
Click to expand...
Click to collapse
Tried putting this into backup on the mem card in clockwork but when I try to get it to install I get a message:
MD5 mismatch!
what am I doing wrong???.
I'm not sure, i actually got this from someone else. It works fine on my wildfire, and it was'nt even created on mine either.
Here is the original link i got from the guy who gave me the backup, try this.
http://rapidshare.com/files/421492817/Wildfire__3uk__Backup__as_frm_factory_.zip
Maybe my upload got corrupted.
tigger69 said:
I'm not sure, i actually got this from someone else. It works fine on my wildfire, and it was'nt even created on mine either.
Here is the original link i got from the guy who gave me the backup, try this.
http://rapidshare.com/files/421492817/Wildfire__3uk__Backup__as_frm_factory_.zip
Click to expand...
Click to collapse
All I did was mount my sd and dragged and dropped it in to backup in clockwork folder (unzipped so that it was the same as my puzzle backup).
I then rebooted my phone into recovery and tried to do the backup through nan. Is that the way I should have done it? or did I need to do a flash first?
Thats how i did it myself, just go into recovery and restore it using nandroid options. I did do a wipe first though,to clear any crap from the previous rom.
Try the new link, hopefully that will work, i will dump it on my card again and try it myself too.
I have just updated the link in the first post with a backup that worked fine, i have tried it myself 5 mins ago.
tigger69 said:
Thats how i did it myself, just go into recovery and restore it using nandroid options. I did do a wipe first though,to clear any crap from the previous rom.
Try the new link, hopefully that will work, i will dump it on my card again and try it myself too.
I have just updated the link in the first post with a backup that worked fine, i have tried it myself 5 mins ago.
Click to expand...
Click to collapse
tigger can you tell my what is that nandroid backup? nandroid backup make's my htc sach at it was as I buied him? sry my english isn't very good
Is a backup of a 3 uk rom. it will restore anyones rom back to a official 3 uk one, with all 3 uk apps etc.
tigger69 said:
Is a backup of a 3 uk rom. it will restore anyones rom back to a official 3 uk one, with all 3 uk apps etc.
Click to expand...
Click to collapse
thanks man and maybe you can tell my what is that UK? I'm junior in htc
uk is england its a backup of a 3 network rom for england.
tigger69 said:
uk is england its a backup of a 3 network rom for england.
Click to expand...
Click to collapse
thanks very much
Thanks very much for posting this. I decided to try wildpuzzle but i didnt think it was worth losing the 3 apps but I hadn't backed up my original rom so this was perfect. This worked very well for me.
Penguinsfly1 said:
Thanks very much for posting this. I decided to try wildpuzzle but i didnt think it was worth losing the 3 apps but I hadn't backed up my original rom so this was perfect. This worked very well for me.
Click to expand...
Click to collapse
Worked perfect for me too with a different SD card. Would not work with the card that had partition on.
Suits me though as I have one SD card with '3' rom on and one with Puzzle+partition on.
Best of both worlds!!!!.
Thanks very much for posting this.
No problem guys, at least it was useful posting it.
tigger69 said:
I'm not sure, i actually got this from someone else. It works fine on my wildfire, and it was'nt even created on mine either.
Here is the original link i got from the guy who gave me the backup, try this.
Maybe my upload got corrupted.
Click to expand...
Click to collapse
hey dude, this link seems inavailable cuz the limit of 10 downloads reached.
could someone reupload that? thx
Sorry i will sort it out.
EDIT- try it now
This might have just helped me solve the biggest problem i have faced in a while!!
Thanks to the OP.
I too, when i partitioned the SD, lost the original backup of the 3 ROM. Thing is, it's my mothers Wildfire!! She was missold it, and now has to return it and wait till next week to receive another.
Anyways, tried everything from RUU (Error 140 Bootloader); tired the %temp% rom.zip to get PC49DIAG.zip, fails to install.
Tried so many different WWE RUU (get Error 131 Invalid Client ID)
Yes, before you ask, i made a goldcard, doesnt do anything here (it works, as it works for other HTC devices i have rooted - Magic )
Anyways, i was going to just flash the most stock ROM i could find (probably MCR) and just tell her to say NOTHING, if the issue of branding arises, to just say that it came like that. Must of slipped thru the net!!
Hopefully this will work!
Thanks again.
UPDATE:
Links do NOT work, can somebody who got this files, please reupload.
I need to try this so i can restore a Wildfire back to 3 branded.
Thanks in advance (if anyone obliges)
Shokka9
http://rapidshare.com/files/441241968/Wildfire__3uk__Backup__as_frm_factory_.zip
I had it on my computer but there's no guarantee that the MD5 thing will work. That seems to break if you move it around too much.
I will get it later, but it appears after sucessfully getting the 3uk RUU from shipped-roms to work (with a downgrade.zip & region.txt), after full reboot, the touch panel has now failed.
If i goto hboot, it simply says TOUCH PANEL-FAIL.
I cannot access the phone at all. The RUU seems to of worked as the 3 logos appears etc, but cant slide the lock screen down to go through the setup.
No problem; its a case of.....'I did a factory reset via phone settings, it rebooted, and this'. Phone going back to 3 store, a new one is coming next week.
3 Store decided to issue new contract, when my Mum went in for an upgrade. They didnt tell her, she ended up phoning 3 as she kept getting SMS saying her balance was going up daily! 3 (on the phone) gave her better deal and said the 3 store do this all the time.
So, ultimately....i won by getting RUU to work, but the phone lost and decided to fail the touch panel to get back at me.
It doesnt even get recognised anymore on the PC, i was going to try a different RUU to see if it was the RUU that casued the fail (which i SERIOUSLY doubt).
Thanks anyways. Not had much joy with this Wildfire....Rooting etc was easy.
need help!
Hi, I've rooted my htc wildfire and after that I got to know that I can't update my phone from htc anymore. I was looking for the ruu file then I found ur post and it is the exact match for my phone. but the link is not working at all..... . could you please upload the file again so I would be able to download it for my phone. will be greatfull....
thanks in advance.
tigger69 said:
Here is a clean nandroid backup as from factory of a 3 uk rom.It has all 3 uk apps,my 3 etc.
It is version-
2.1 update1
Baseband- 13.45.55.24H_3.35.15.31
Kernal- 2.6.29-4266b2e1
Build no.- 1.16.771.3 CL186175
Software number- 1.16.771.3
I have seen a few posts asking for this so thought i would post it.
There is NO personal information in this.
Copy the file to clockworkmod/backup on your sd card and boot in to recovery, and select nandroid restore.
Click to expand...
Click to collapse

[Q] Nexus One, Return to stock 2.2 after trying 2.3.3

After the initial jubilation of finally getting Gingerbread on my stock Nexus one, I have come to the conclusion that its a little half baked and setting aside all the little annoyances, the current battery life bug that seems to be affecting some people (myself included) is just terrible.
So my question is, how to I get back to stock 2.2 (or 2.2.2) now that I have 2.3.3 installed.
I don't want to root, or open the boot loader or do anything to invalidate the warranty. Is there a way ?
Thanks, and sorry if this has already been covered somewhere else (could not find it)
shimsim said:
...I don't want to root, or open the boot loader or do anything to invalidate the warranty. Is there a way ?...
Click to expand...
Click to collapse
No.
10chars
shimsim said:
After the initial jubilation of finally getting Gingerbread on my stock Nexus one, I have come to the conclusion that its a little half baked and setting aside all the little annoyances, the current battery life bug that seems to be affecting some people (myself included) is just terrible.
So my question is, how to I get back to stock 2.2 (or 2.2.2) now that I have 2.3.3 installed.
I don't want to root, or open the boot loader or do anything to invalidate the warranty. Is there a way ?
Thanks, and sorry if this has already been covered somewhere else (could not find it)
Click to expand...
Click to collapse
http://www.google.com/support/forum/p/android/thread?tid=3ee1ccfdaffc5881&hl=en
Worked for lots of people, don't know if it works for 2.3, it worked for 2.2.
So.. ya might just wanna keep an open mind.
Anyway, some of the links on the page are dead, you might need to dig around for what you need.
Google is your friend
http://forum.xda-developers.com/showpost.php?p=11745519&postcount=21
I tried this also (just to see for myself, instead of listening to the rumors), and can confirm it works.
The only comment I would make is that the filename is NOT case sensitive (I got it to work as PASSIMG.zip, passimg.zip, and also combinations like PassImG.zip)
Sent from my Nexus One using XDA App
Passimg method is working? Nice find! I imagine this will be of great help to many people.
Thanks for all the suggestions and help, I will give it a go.
In terms of the most recent version that I can go back to, I assume it has to be a manufacturer shipment ROM or full system image.
The latest release on shipped roms is FRG33 http shipped-roms.com/index.php?category=android&model=Passion%20(Nexus%20One
I found on the HTC developers site (http developer.htc.com/) FRG83 but the link seems to be broken http dl4.htc.com/RomCode/Source_and_Binaries/signed-passion-img-FRG83_0923.zip
Assuming I can find a copy of FRG83 system image, am I correct in assuming I can also rename this to passimg.zip and downgrade or does it have to be the FRG33 manufacture shipped rom?
ps, sorry i cant post url links hence the http
If it's a shipped image, then yes.
If you look in the zip, and see a bunch of image files, instead of a folder structure, then it will probably work...
Let me know if you find FRG83.
I know someone who would LOVE to find it!
Sent from my Nexus One using XDA App
danger-rat said:
If it's a shipped image, then yes.
If you look in the zip, and see a bunch of image files, instead of a folder structure, then it will probably work...
Let me know if you find FRG83.
I know someone who would LOVE to find it!
Sent from my Nexus One using XDA App
Click to expand...
Click to collapse
Thanks!!!
Hi,
I know this question may sound stupid but I have this doubt and I would like to understand better one thing:
Can someone please explain me why it's not possible to restore 2.2 from 2.3.3 using directly a nandroid restore skipping the PASSIMG.zip part?
I'm new to this and I'm still learning some things, but if the nandroid is a backup of the entire system, why can't I just wipe out everything and restore from that file?
Thank you so much for your help!
If you have nandroid - great.
If you flashed stock image - you don't have it anymore, because stock image overwrites your custom recovery, and without unlocked bootloader or option to root, there is no way to restore it.
Thank you so much for the reply
So, just to be sure: since my bootloader is unlocked this means that if I wipe everything, then I can flash a custom recovery and then restore from a nandroid backup without having to flash first another stock ROM and root again, right?
That is correct.
However, keep in mind that rebooting your phone when you soil have the stock ROM will cause the stock recovery to be restored, so as soon as you install your custom recovery, you need to boot into recovery without rebooting the phone...
Sent from my Nexus One using XDA App
efrant said:
http://forum.xda-developers.com/showpost.php?p=11745519&postcount=21
Click to expand...
Click to collapse
The dowload link include in the link above for the ROM is not working. I am getting this error message: "Unable to open shipped/Passion (Nexus One/"
efrant: Can you please update the link?
Thank you!
jay_supreme said:
The dowload link include in the link above for the ROM is not working. I am getting this error message: "Unable to open shipped/Passion (Nexus One/"
efrant: Can you please update the link?
Thank you!
Click to expand...
Click to collapse
Updated...
I think I found a copy of FRG83 here:
androidpit.de/de/android/forum/thread/407726/ROMs-Kernels-Radios-fuer-das-Nexus-One
p.s. sorry, i still cant post url links ..... so add the w w w

[Q] Can't download files on this site

I heard something recently about fileshare sites being shut down...is that what I'm experiencing. Tried to download files from: http://forum.xda-developers.com/showthread.php?t=1359068 and none of the links work. Actually a couple did but said I could only download a file I uploaded myself. I tried downloading from another thread on this site and had the same problem. Any solutions/alternatives? How can I download from the link I posted above?
Thanks!
Firecracker_RC said:
I heard something recently about fileshare sites being shut down...is that what I'm experiencing. Tried to download files from: http://forum.xda-developers.com/showthread.php?t=1359068 and none of the links work. Actually a couple did but said I could only download a file I uploaded myself. I tried downloading from another thread on this site and had the same problem. Any solutions/alternatives? How can I download from the link I posted above?
Thanks!
Click to expand...
Click to collapse
I see a KJ4 link. Have you tried the KJ5 thread? It's the newest one for our 7310.
Hi nirogu325, thanks for replying. This is what I am trying to do:
-Enable adhoc connection so I can use my windows mobile phone as a hotspot for my tabl, and
-Enable USB charging for my tab in my car and elsewhere, not just wall jack.
Based on what I've read, I need busybox (Titanium back up says it's installed but when I downloaded an app called wifiadhocenabler, it says it is not installed. Installing it from the market says I need Nand Unlock and this is where I'm stuck at the moment. Do you know how to perform this on the P7310? Or an easier way to meet the objectives above?
Thanks again
Firecracker_RC said:
Hi nirogu325, thanks for replying. This is what I am trying to do:
-Enable adhoc connection so I can use my windows mobile phone as a hotspot for my tabl, and
-Enable USB charging for my tab in my car and elsewhere, not just wall jack.
Based on what I've read, I need busybox (Titanium back up says it's installed but when I downloaded an app called wifiadhocenabler, it says it is not installed. Installing it from the market says I need Nand Unlock and this is where I'm stuck at the moment. Do you know how to perform this on the P7310? Or an easier way to meet the objectives above?
Thanks again
Click to expand...
Click to collapse
I assume you're on a stock firmware. If I were you, I'd flash this specific version which is already rooted and has busybox as you can read in the OP. Also, flash the v2d version of the motley kernel and go here for the USB charging script and instructions on enabling. I know that last link is for the 10.1, but it is the one motley linked to in the v2b version changelog in his kernel thread.
After my soft brick yesterday, I used Odin to "install" the version you attached in your General Guide post P310XARKJ5_P7310UEKJ5_HOME.tar.md5). That's the one, right?
Anyway, the good news is, I decided to install BusyBox without doing the Nand Unlock (maybe it was already done?), and it worked! The wifiadhocenabler app works now and I have a connection to my wm phone! Yay! Before trying the app (for the sake of onlookers) I tried the other method with the wpa_supplicant, such as the one here: http://androidtablethacks.com/android-tablet-hacks/how-to-enable-adhoc-wifi-on-android-tablets/ and it did not work for me. The app did!
So now, I'll try the kernel you posted above and then the USB charging.
I'm going to look over your general guide to see if I can figure out how to flash. I'm guessing it's the same or similar to when I recovered my tab in Odin...?
Firecracker_RC said:
After my soft brick yesterday, I used Odin to "install" the version you attached in your General Guide post P310XARKJ5_P7310UEKJ5_HOME.tar.md5). That's the one, right?
Anyway, the good news is, I decided to install BusyBox without doing the Nand Unlock (maybe it was already done?), and it worked! The wifiadhocenabler app works now and I have a connection to my wm phone! Yay! Before trying the app (for the sake of onlookers) I tried the other method with the wpa_supplicant, such as the one here: http://androidtablethacks.com/android-tablet-hacks/how-to-enable-adhoc-wifi-on-android-tablets/ and it did not work for me. The app did!
So now, I'll try the kernel you posted above and then the USB charging.
I'm going to look over your general guide to see if I can figure out how to flash. I'm guessing it's the same or similar to when I recovered my tab in Odin...?
Click to expand...
Click to collapse
If you mean flashing a CWM package as the motley kernel, a file goes in the SDcard, you access the CWM Recovery and flash. That's a generic way BUT depending on what you will flash you may have to wipe. That's why I avoided altogether putting generic instructions regarding CWM packages in my guide (instructions may vary between ROM and kernels). Read your flashable package's thread carefully.
kind of like rooting? Yes, do I have to wipe to flash the motley kernel? I'm not seeing the flashable packages thread, can you point me to it?
Firecracker_RC said:
kind of like rooting? Yes, do I have to wipe to flash the motley kernel? I'm not seeing the flashable packages thread, can you point me to it?
Click to expand...
Click to collapse
No, lol. If you want to flash the motley kernel just follow that thread's instructions. I gave you the motley kernel thread link in a previous post. For kernels, no wipe is necessary, for ROMs, yes.
Ok, thank you. lol
Firecracker_RC said:
Ok, thank you. lol
Click to expand...
Click to collapse
You're welcome. Some people have the tendency NOT to wipe while flashing ROMs...yet complain later on the road. Always wipe when it comes to ROMs if you want to avoid issues. The only bugs you will experience are the ones that come with the ROM already. Better safe than sorry.
Ah, that leads me to wonder...When my tab was soft bricked and I used Odin3 and inserted the KJ5 file into the PDA section, and so on (I think that was flashing), was I supposed to do a wipe before I did that? If so, would it be better if I started from scratch again? ...hoping not, but better now than latter I'm thinking.
Firecracker_RC said:
Ah, that leads me to wonder...When my tab was soft bricked and I used Odin3 and inserted the KJ5 file into the PDA section, and so on (I think that was flashing), was I supposed to do a wipe before I did that? If so, would it be better if I started from scratch again? ...hoping not, but better now than latter I'm thinking.
Click to expand...
Click to collapse
No. ODIN clears everything (including kernels, ROMs and CWM Recoveries). Everything back to stock. I was just referring to flashing other custom ROMs (non-ODIN, i.e. CWM flashable) procedures. Stick to the thread instructions in your chosen ROM and you'll be fine. It's just that some don't follow instructions and due to that, they may experience weird bugs.
That's good news, and strange, because after I used Oden3 (in the way I previously described), all my apps and files were still in tact. Does it just affect the system and not the file memory?
P.S. Hey! I'm no longer a noob! lol I just noticed I am now a "Junior Member".
P.S.S. I'm now running my tablet off my wm hotspot while charging it on my pc! woohoo
Firecracker_RC said:
That's good news, and strange, because after I used Oden3 (in the way I previously described), all my apps and files were still in tact. Does it just affect the system and not the file memory?
P.S. Hey! I'm no longer a noob! lol I just noticed I am now a "Junior Member".
Click to expand...
Click to collapse
That is because you didn't check F.Reset Time on the left side of ODIN before flashing. It is advisable to make sure it is checked. Thanks, I'm gonna put that little but important detail in my guide (dunno how I missed that one ). I advise using Titanium Backup (for apps backup) and then ODIN. You might be fine as you are, but if you ever experience something weird then you know.
Firecracker_RC said:
P.S.S. I'm now running my tablet off my wm hotspot while charging it on my pc! woohoo
Click to expand...
Click to collapse
I'm glad you made it!
Thanks for your support. If I ever have some extra change and feel like making a donation, I'll keep you in mind! Hey, where's your donation link anyway? Better get one!
nirogu325 said:
That is because you didn't check F.Reset Time on the left side of ODIN before flashing. It is advisable to make sure it is checked. Thanks, I'm gonna put that little but important detail in my guide (dunno how I missed that one ). I advise using Titanium Backup (for apps backup) and then ODIN. You might be fine as you are, but if you ever experience something weird then you know.
Click to expand...
Click to collapse
My tablet is definitely a little laggy now, but that could be the 3.2 HC. Since I did not check that off, does it mean that it did not install on a clean wipe? I'm wondering if I should just do it while I remember the path to how I got where I'm at now. I doubt I'll remember everything down the road.
I have been making nandroid backups as well as titanium app backups.
Firecracker_RC said:
My tablet is definitely a little laggy now, but that could be the 3.2 HC. Since I did not check that off, does it mean that it did not install on a clean wipe? I'm wondering if I should just do it while I remember the path to how I got where I'm at now. I doubt I'll remember everything down the road.
I have been making nandroid backups as well as titanium app backups.
Click to expand...
Click to collapse
As for donations, nah it's ok, I am no developer. As for the suggestion, it was just that, a suggestion for next time. Keep that in mind. It will become a habit down the road.
Sent from my GT-P7310
nirogu325,
I'm back to do my clean wipe. I performed the wipe/data reset in nandroid and now it's saying there is an update from KJ5 to LA3. Do you still think the custom kj5 is better than the stock LA3? I'm wondering if I should just install the update, root, install the motley kernel and go from there...?
Hope you're well! I still think you should add a donate link...you don't have to be a developer, your assistance/guidance is equally helpful to the community.
While I'm waiting, I flashed http://forum.xda-developers.com/showthread.php?t=1375112 and then I noticed I have the old CMR so I downloaded your updated package: GTab89Files and I cannot paste a single file from that folder onto my tab. I can paste files from other folders, but this one I copy and when I go to paste the paste option is not enabled; if I drag I get a little red circle with a line through it. Any ideas as to why it's rejecting?

[Q] LG Thrill GB w/ClockworkMod Recovery

(Obvious Noob warning---) A friend helped me root my Thrill, install ClockworkMod Recovery, and then install CM7 on my Thrill. But I would like to try the LG GB release. Is it necessary to backtrack all the way back to stock to do this (i.e. reinstall the stock ROM, reinstall the stock recovery, unroot, etc.)?
My friend tried using the LG upgrade tool on his LG phone without going back to stock and ended up bricking it. He says that usually within a few days of release, a CMR compatible zip file (usually already rooted) appears here on XDA (I haven't seen it), which makes things easier (but obviously he didn't wait for it himself).
Will a zip be possible for the Thrill GB? (The file seems quite large (420MB), so I'm guessing there is a lot of media included.) Or should I just bite the bullet and backtrack?
Rick
Rick Tillery said:
(Obvious Noob warning---) A friend helped me root my Thrill, install ClockworkMod Recovery, and then install CM7 on my Thrill. But I would like to try the LG GB release. Is it necessary to backtrack all the way back to stock to do this (i.e. reinstall the stock ROM, reinstall the stock recovery, unroot, etc.)?
My friend tried using the LG upgrade tool on his LG phone without going back to stock and ended up bricking it. He says that usually within a few days of release, a CMR compatible zip file (usually already rooted) appears here on XDA (I haven't seen it), which makes things easier (but obviously he didn't wait for it himself).
Will a zip be possible for the Thrill GB? (The file seems quite large (420MB), so I'm guessing there is a lot of media included.) Or should I just bite the bullet and backtrack?
Rick
Click to expand...
Click to collapse
I'm assuming that the official update method was used.
Just use this method after downloading the update. No bricking.
SEE THREAD
The Dark Lestat said:
I'm assuming that the official update method was used.
Just use this method after downloading the update. No bricking.
SEE THREAD
Click to expand...
Click to collapse
Thank you for your help!
Rick
Trojan?
Sorry, but as a noob, I can't post in that other thread.
It seems that the shttp3.exe in the LG Flash Package triggers Symantec's trojan detection. Some searching seems to indicate (assuming I'm reading all the cryptic virus sites correctly) that there is something to this, although it seems that different scanners find different trojans/viruses (can't post the link, but Google for "shttp3.exe" and "trojan"). I also found that the web site for this utility is blocked at work, because it's a "malicious site."
Has anyone seen this? Has anyone been able to verify/refute this?
Rick
There is no virus, Lestat would never do that
Sent from my LG-P925 using XDA
Just my .02 .....Get rid of Symantec !! They are known for scaring people into a virus frenzy.. Yes, it is possible that it is seeing it as a potential virus because shttp is a workaround from the usual porting of windows ip services. ...
Correct me if i'm wrong somebody please !!
Get yourself Comodo and save your money...
Regards,
Dwayne
PS: somebody on here has written a script that just uses shttp temporarily while
your doing the flash procedure, and then reverts your host files back automatically after your done. You should try it.
dwaynedman said:
Just my .02 .....Get rid of Symantec !!
Click to expand...
Click to collapse
Symantec isn't really a choice on work PC.
Get yourself Comodo and save your money...
Click to expand...
Click to collapse
I'm sorry I can't give the link yet, but if you'll Google you'll see Comodo classifies shttp3.exe as "ApplicUnwnt.Win32.ServerWeb.SmallHTTP.~A" or "UnclassifiedMalware" (I guess depending on the version). A number of scanners find issues with shttp3.exe. I'm not saying it is infected, only that it is doing something suspicious.
Rick
Rick Tillery said:
Sorry, but as a noob, I can't post in that other thread.
It seems that the shttp3.exe in the LG Flash Package triggers Symantec's trojan detection. Some searching seems to indicate (assuming I'm reading all the cryptic virus sites correctly) that there is something to this, although it seems that different scanners find different trojans/viruses (can't post the link, but Google for "shttp3.exe" and "trojan"). I also found that the web site for this utility is blocked at work, because it's a "malicious site."
Has anyone seen this? Has anyone been able to verify/refute this?
Rick
Click to expand...
Click to collapse
shttp3.exe is in no way a virus. I've scanned with AVG and MalwareBytes Anti-Malware and they check out good.
Back to square one
OK, I seem to be stuck.
With paranoia in tow, I decided to take the long way back to stock. Unfortunately, when I tried to restore the backup of my stock image I made to SD card after installing CMR, the md5 checksum failed. I'm not sure what I can do about this.
So ok, I tried following the above link. The first step is to ensure the su binary is up-to-date. But when I tried this, I get a failure downloading the manifest. This is true for WiFi and HSPA+. I Googled and found a suggestion to delete the su binary. But that didn't help (I'm not sure how it would have helped anyway).
So back to the original question. Can I use the LG upgrade process to upgrade without going backwards (as you can see above, I can't) without bricking the phone? Can I start at step 3 in the link above and succeed?
Rick
The Dark Lestat said:
shttp3.exe is in no way a virus. I've scanned with AVG and MalwareBytes Anti-Malware and they check out good.
Click to expand...
Click to collapse
Thank you, sir. I hope it didn't seem accusing.
Rick
Rick Tillery said:
Thank you, sir. I hope it didn't seem accusing.
Rick
Click to expand...
Click to collapse
It's cool, my friend.
Sent from my Samsung Galaxy S II w/ CM9
Rick Tillery said:
OK, I seem to be stuck.
With paranoia in tow, I decided to take the long way back to stock. Unfortunately, when I tried to restore the backup of my stock image I made to SD card after installing CMR, the md5 checksum failed. I'm not sure what I can do about this.
So ok, I tried following the above link. The first step is to ensure the su binary is up-to-date. But when I tried this, I get a failure downloading the manifest. This is true for WiFi and HSPA+. I Googled and found a suggestion to delete the su binary. But that didn't help (I'm not sure how it would have helped anyway).
So back to the original question. Can I use the LG upgrade process to upgrade without going backwards (as you can see above, I can't) without bricking the phone? Can I start at step 3 in the link above and succeed?
Rick
Click to expand...
Click to collapse
Is it safe to ignore the su version update?
Short of this, can I override the MD5 checksum? I realize that image could be corrupt, but if I'm just going to replace it with the GB release, does that matter?
Rick
You should just put your phone in recovery mode and update through the tool
with your IMEI #. It will give you the latest update !
If you need some help on that I think Lestat or somebody has a write-up
on doing this.
Good luck,
Dwayne
dwaynedman said:
You should just put your phone in recovery mode and update through the tool
with your IMEI #. It will give you the latest update !
If you need some help on that I think Lestat or somebody has a write-up
on doing this.
Good luck,
Dwayne
Click to expand...
Click to collapse
Can you be a bit more specific?
1. By "recovery mode," do you mean into ClockworkMod Recovery, or I should revert to stock (I made a copy of it after I rooted the stock ROM, but before I installed CMR)?
2. By "the tool," do you mean the official LGMobile Software Update, or the LG Flash Package referenced in the link above?
3. By "latest update," do you mean the file directly from LG, or the copy (v20p) linked from the link above?
4. If the latter in both previous questions, which set of steps do I need to follow from the above link? Can I do only 3 (LG Flash Tool), or do I need to follow 1 (Recovery Manager), 2 (Returning to Stock), and 3?
My friend had a different LG phone, with ClockworkMod Recover and CM7 installed. He reverted the CM7 to stock, but did not replace CMR with the stock recovery. Then he used the official LG upgrade method and bricked his phone. I'm trying to avoid this.
Are you saying I don't have to worry about this on the LG Thrill 4G? Can I go straight from the current CMR+CM7 configuration to the LG GB release using the official LG process?
If you mean I should use a different process, can you point me to it? As I mentioned, I run into dead-ends using the method linked above. And I'm not even sure whether I should be doing steps 1, 2 and 3, or if I should just use step 3.
Any and all help is appreciated, but I guess I don't understand the shorthand you're using here, so if you could be a bit more specific, I wouldn't feel so lost.
Rick
Rick Tillery said:
Can you be a bit more specific?
1. By "recovery mode," do you mean into ClockworkMod Recovery, or I should revert to stock (I made a copy of it after I rooted the stock ROM, but before I installed CMR)?
2. By "the tool," do you mean the official LGMobile Software Update, or the LG Flash Package referenced in the link above?
3. By "latest update," do you mean the file directly from LG, or the copy (v20p) linked from the link above?
4. If the latter in both previous questions, which set of steps do I need to follow from the above link? Can I do only 3 (LG Flash Tool), or do I need to follow 1 (Recovery Manager), 2 (Returning to Stock), and 3?
My friend had a different LG phone, with ClockworkMod Recover and CM7 installed. He reverted the CM7 to stock, but did not replace CMR with the stock recovery. Then he used the official LG upgrade method and bricked his phone. I'm trying to avoid this.
Are you saying I don't have to worry about this on the LG Thrill 4G? Can I go straight from the current CMR+CM7 configuration to the LG GB release using the official LG process?
If you mean I should use a different process, can you point me to it? As I mentioned, I run into dead-ends using the method linked above. And I'm not even sure whether I should be doing steps 1, 2 and 3, or if I should just use step 3.
Any and all help is appreciated, but I guess I don't understand the shorthand you're using here, so if you could be a bit more specific, I wouldn't feel so lost.
Rick
Click to expand...
Click to collapse
Remove your battery and keep the phone unplugged
Launch the mobile updater tool
Hold the volume+ button plug the phone in and keep holding the volume+ till the computer downloads the drivers your phone is now in download mode
Once the phone is picked up go to customer support on the LG updater tool and click on recovery phone put your imie number in click check (make sure its the right model) an let the updater tool do its job. Once its done flashing launch into recovery volume- plus power plus 3D button do a complete wipe and factory reset and reboot your phone ... you'll lose cwm and root and be back to full stock
Sent from my LG-P925 using XDA
Bricked?
No joy. Following the steps, the upgrade stopped at 6%. Trying a number of times, it eventually forced me to exit the program (no more restarts). Rerunning the updater (and downloading the 420 MB image yet again on a VERY slow connection) I tried again and again, with different combinations of battery and plug order with power and volume buttons, but nothing worked. Checking elsewhere I found some issues had been reported with Windows Vista/7, so I tried on an XP machine. Now the "Start Updating" bar is red (it was always gray with W7). But now when I try to restore (or even update for that matter), it asks for my S/N (it never did that before) and then says it is "no longer able to upgrade." Reading around, it seems this is an indication of the device being bricked.
Rick
It sounds like you are very close to getting it working Rick.
My update did the same thing, looped over and over until it
finally kicked me out. Just plugging and unplugging the phone etc....
And when my update stuck at 6% the last time, i took my battery out and then in real quick and that seemed to work.
Does the phone still vibrate when you plug the usb cable into it while holding volume..? If it does then I highly doubt that your phone is bricked, just in a semi flashed state....No worries
Should Rick be trying to run LG Updater as administrator ? I didn't, but it might not hurt.
Regards & Luck,
Dwayne
http://forum.xda-developers.com/showthread.php?p=22417769
Have you tried this yet cause if you can get the LG logo to come up then you can reflash the phone and get it working send a pm to the dark lestat he may be able to team viewer you and help you out
Sent from my ****ty supported LG Thrill
dwaynedman said:
It sounds like you are very close to getting it working Rick.
Click to expand...
Click to collapse
I wouldn't have believed you early this morning, but now maybe...
My update did the same thing, looped over and over until it
finally kicked me out. Just plugging and unplugging the phone etc....
And when my update stuck at 6% the last time, i took my battery out and then in real quick and that seemed to work.
Click to expand...
Click to collapse
I tried a bunch of different combinations...none seemed to make the app happy. I finally punted Windows 7 and moved to an XP machine, only to get the "no longer able to update" message. At that point I assumed I was screwed (effectively bricked).
Does the phone still vibrate when you plug the usb cable into it while holding volume..? If it does then I highly doubt that your phone is bricked, just in a semi flashed state....No worries
Click to expand...
Click to collapse
It never really vibrated, but I was able to get back into CMR. Unfortunately NONE of my backups work at all. They all have MD5 checksum failures. I tried a trick I found online and got past that step, only to have it say a failure restoring /system. So much for CMR.
JReeher said:
http://forum.xda-developers.com/showthread.php?p=22417769
Have you tried this yet cause if you can get the LG logo to come up then you can reflash the phone and get it working send a pm to the dark lestat he may be able to team viewer you and help you out
Click to expand...
Click to collapse
Which step? As I mentioned above, I can't even get the first step of the first section (updating the su binary). And if I start at the 3rd section, Symantec prohibits me from using shttp3.exe (I tried to unquarantine it, but it gives a permission error, even as Administrator, when I try to run it), so I'll have to use a different machine.
I was able to reinstall the CM7 3/15 release, so that's something. I was going to restore the stock recovery backup I made, but even that doesn't seem to work. I'm having issue with backups :-(
Rick
i have never been able to restore a backup. i dont know why... but i have tried several times in several different instances.
---------- Post added at 11:56 AM ---------- Previous post was at 11:50 AM ----------
rick tillery, if you want to get your phone back to alive and well i'd suggest doing this:
http://forum.xda-developers.com/showthread.php?t=1558723&page=3
4th post i think

[Q] I can only send a text message to 10 people max at one, why?

Hi, when i try to send a text to multiple people with one text message, I'm only allowed to send to 10 people max, is there a way to get rid of this?
Cheers.
Check this thread here
http://forum.xda-developers.com/showthread.php?t=1371755
I believe this could be a limitation of the ROM or the service you are using. Search the developer forum for a ROM that gets past this limit and check with your phone service provider (I read somewhere that Verizon has this limit, but can't vouch for that as I am in different country)
thanks, but I am new to this whole android world, this is my first android coming from a nokia n900.
I have been reading, but it seems I need to root my phone which is now difficult because as soon as I received the phone i updated it and now have the kernel LA6 instead of original LA4 which is more difficult to root.
As for the thread you provided matius44, does the .apk file only work with ics roms or can one install it with just a rooted GB rom.
----
Just so I can be sure, I do want to root, but I'm slightly confused, is it correct in saying that I need to downgrade the fw and kernel to an older stock rootable rom then root the phone? or is this wrong?
Yes- have a look at the developer forum - there are details here...
http://forum.xda-developers.com/showthread.php?t=1329360
and here..
http://forum.xda-developers.com/showthread.php?t=1424997
Dr Ketan is the man!
salespalace said:
thanks, but I am new to this whole android world, this is my first android coming from a nokia n900.
I have been reading, but it seems I need to root my phone which is now difficult because as soon as I received the phone i updated it and now have the kernel LA6 instead of original LA4 which is more difficult to root.
As for the thread you provided matius44, does the .apk file only work with ics roms or can one install it with just a rooted GB rom.
----
Just so I can be sure, I do want to root, but I'm slightly confused, is it correct in saying that I need to downgrade the fw and kernel to an older stock rootable rom then root the phone? or is this wrong?
Click to expand...
Click to collapse
That used to be the case, but there is now an easier way which flashing pre rooted ROMs directly and you're good to go, here is the thread:
http://forum.xda-developers.com/showthread.php?t=1535025
As for the .apk mod, I never tried myself honestly but there are versions for GB and for ICS, any .apk with ZCLP in it's name is for ICS you don't need that, take the other ones
I've tried dr. ketan's way and it didnt work for me, maybe i didnt know what I was doing,
Ill try these pre rooted roms, I just basically flash them to the phone, does all my data in my phone get wiped off clean? if so, what do i use to make a backup.
btw sorry for all these questions.
and thanks in advance.
It's been that long since I rooted my phone I've forgotten how to do a backup without rooting! Titanium backup needs root.
Have you tried booting into recovery mode then doing a backup from the menu that appears (vol up+home then press power until Galaxy Note boot screen appears then let go of all buttons) I'm pretty sure you can backup from there.
salespalace said:
I've tried dr. ketan's way and it didnt work for me, maybe i didnt know what I was doing,
Ill try these pre rooted roms, I just basically flash them to the phone, does all my data in my phone get wiped off clean? if so, what do i use to make a backup.
btw sorry for all these questions.
and thanks in advance.
Click to expand...
Click to collapse
You can have it either ways, wiped clean or not, up to you..
At the pre rooted ROMs thread there is a screen shot showing the three file you will find in the zips and the places they should be put at in Odin, if you do NOT want to wipe your data do NOT choose the CSC file, only flash PDA and phone (modem)
Or you can use Titanium Backup to backup your user apps only, do NOT backup system apps but your settings will be lost of course
Your preference
EDIT: Sorry forgot you don't have root lol! Sorry have no idea how to backup without root, try the poster above me suggested
Congrats Matius! 1000 posts! That is great work!
no you can't backup using that method, it just give me options to reboot, wipe everything off and some other things. all i need to backup is mainly my contacts and some data, ill try kies.
Kies should work. I wish I could remember what I did to create the backup - I've done a quick google and only found using adb and a terminal prompt, which I have never used. A quick search of Google Play shows some that may be worth a try and are free.
Wish I could be more help but for the life of me can't remember what I did that first night with my Note and got it to backup.
Good luck with Kies and enjoy flashing ROMs!
even kies doesnt work. i think astro backup will backup my files, as for settings ill just have to deal with it.
OK - good luck!
BTW - If you get heat issues after flashing - don't panic! Leave the phone off for five to ten minutes to cool down then charge it for an hour with the screen off. I found this was my biggest worry when I started flashing. Got really hot - thought the screen would melt. Now I just use the above process and never have problem.
All the best!
TempusFudgeIt said:
Congrats Matius! 1000 posts! That is great work!
Click to expand...
Click to collapse
Loool I just noticed this! Thanks!
salespalace said:
no you can't backup using that method, it just give me options to reboot, wipe everything off and some other things. all i need to backup is mainly my contacts and some data, ill try kies.
Click to expand...
Click to collapse
Backup contacts with your Google account, most reliable way
thanks all, cant press thanks anymore, 8 thanks limit.
im now on the process rooting, but accidentally added the csc file, oh well..
I don't know if ive rooted, lol.
erm, odin says successful, but nothing seems to be removed, and i mean nothing, everything is still there, even my apps. but i do have two new apps or maybe one not sure. this superuser app, the other is a facebook camera app.
am i rooted? if so... thanks all. now to read through forum to see what the best gingerbread rom is or if ics rom is worth using now.
salespalace said:
I don't know if ive rooted, lol.
erm, odin says successful, but nothing seems to be removed, and i mean nothing, everything is still there, even my apps. but i do have two new apps or maybe one not sure. this superuser app, the other is a facebook camera app.
am i rooted? if so... thanks all. now to read through forum to see what the best gingerbread rom is or if ics rom is worth using now.
Click to expand...
Click to collapse
To make sure you are rooted use a file explorer app (root explorer or ES file explorer)and try to copy a file (pic, video or anything) to /system folder
If it's saved then congrats you're rooted

Categories

Resources