[ROM] 3 uk nandroid backup - Wildfire Android Development

Here is a clean nandroid backup as from factory of a 3 uk rom.It has all 3 uk apps,my 3 etc.
It is version-
2.1 update1
Baseband- 13.45.55.24H_3.35.15.31
Kernal- 2.6.29-4266b2e1
Build no.- 1.16.771.3 CL186175
Software number- 1.16.771.3
I have seen a few posts asking for this so thought i would post it.
There is NO personal information in this.
http://rapidshare.com/files/422526908/2010-09-26.18.35.51.rar
Copy the file to clockworkmod/backup on your sd card and boot in to recovery, and select nandroid restore.

tigger69 said:
Here is a clean nandroid backup as from factory of a 3 uk rom.It has all 3 uk apps,my 3 etc.
It is version-
2.1 update1
Baseband- 13.45.55.24H_3.35.15.31
Kernal- 2.6.29-4266b2e1
Build no.- 1.16.771.3 CL186175
Software number- 1.16.771.3
I have seen a few posts asking for this so thought i would post it.
There is NO personal information in this.
http://rapidshare.com/files/422507599/Wildfire__3uk__Backup__as_frm_factory_.zip
Copy the file to clockworkmod/backup on your sd card and boot in to recovery, and select nandroid restore.
Click to expand...
Click to collapse
Tried putting this into backup on the mem card in clockwork but when I try to get it to install I get a message:
MD5 mismatch!
what am I doing wrong???.

I'm not sure, i actually got this from someone else. It works fine on my wildfire, and it was'nt even created on mine either.
Here is the original link i got from the guy who gave me the backup, try this.
http://rapidshare.com/files/421492817/Wildfire__3uk__Backup__as_frm_factory_.zip
Maybe my upload got corrupted.

tigger69 said:
I'm not sure, i actually got this from someone else. It works fine on my wildfire, and it was'nt even created on mine either.
Here is the original link i got from the guy who gave me the backup, try this.
http://rapidshare.com/files/421492817/Wildfire__3uk__Backup__as_frm_factory_.zip
Click to expand...
Click to collapse
All I did was mount my sd and dragged and dropped it in to backup in clockwork folder (unzipped so that it was the same as my puzzle backup).
I then rebooted my phone into recovery and tried to do the backup through nan. Is that the way I should have done it? or did I need to do a flash first?

Thats how i did it myself, just go into recovery and restore it using nandroid options. I did do a wipe first though,to clear any crap from the previous rom.
Try the new link, hopefully that will work, i will dump it on my card again and try it myself too.
I have just updated the link in the first post with a backup that worked fine, i have tried it myself 5 mins ago.

tigger69 said:
Thats how i did it myself, just go into recovery and restore it using nandroid options. I did do a wipe first though,to clear any crap from the previous rom.
Try the new link, hopefully that will work, i will dump it on my card again and try it myself too.
I have just updated the link in the first post with a backup that worked fine, i have tried it myself 5 mins ago.
Click to expand...
Click to collapse
tigger can you tell my what is that nandroid backup? nandroid backup make's my htc sach at it was as I buied him? sry my english isn't very good

Is a backup of a 3 uk rom. it will restore anyones rom back to a official 3 uk one, with all 3 uk apps etc.

tigger69 said:
Is a backup of a 3 uk rom. it will restore anyones rom back to a official 3 uk one, with all 3 uk apps etc.
Click to expand...
Click to collapse
thanks man and maybe you can tell my what is that UK? I'm junior in htc

uk is england its a backup of a 3 network rom for england.

tigger69 said:
uk is england its a backup of a 3 network rom for england.
Click to expand...
Click to collapse
thanks very much

Thanks very much for posting this. I decided to try wildpuzzle but i didnt think it was worth losing the 3 apps but I hadn't backed up my original rom so this was perfect. This worked very well for me.

Penguinsfly1 said:
Thanks very much for posting this. I decided to try wildpuzzle but i didnt think it was worth losing the 3 apps but I hadn't backed up my original rom so this was perfect. This worked very well for me.
Click to expand...
Click to collapse
Worked perfect for me too with a different SD card. Would not work with the card that had partition on.
Suits me though as I have one SD card with '3' rom on and one with Puzzle+partition on.
Best of both worlds!!!!.
Thanks very much for posting this.

No problem guys, at least it was useful posting it.

tigger69 said:
I'm not sure, i actually got this from someone else. It works fine on my wildfire, and it was'nt even created on mine either.
Here is the original link i got from the guy who gave me the backup, try this.
Maybe my upload got corrupted.
Click to expand...
Click to collapse
hey dude, this link seems inavailable cuz the limit of 10 downloads reached.
could someone reupload that? thx

Sorry i will sort it out.
EDIT- try it now

This might have just helped me solve the biggest problem i have faced in a while!!
Thanks to the OP.
I too, when i partitioned the SD, lost the original backup of the 3 ROM. Thing is, it's my mothers Wildfire!! She was missold it, and now has to return it and wait till next week to receive another.
Anyways, tried everything from RUU (Error 140 Bootloader); tired the %temp% rom.zip to get PC49DIAG.zip, fails to install.
Tried so many different WWE RUU (get Error 131 Invalid Client ID)
Yes, before you ask, i made a goldcard, doesnt do anything here (it works, as it works for other HTC devices i have rooted - Magic )
Anyways, i was going to just flash the most stock ROM i could find (probably MCR) and just tell her to say NOTHING, if the issue of branding arises, to just say that it came like that. Must of slipped thru the net!!
Hopefully this will work!
Thanks again.

UPDATE:
Links do NOT work, can somebody who got this files, please reupload.
I need to try this so i can restore a Wildfire back to 3 branded.
Thanks in advance (if anyone obliges)
Shokka9

http://rapidshare.com/files/441241968/Wildfire__3uk__Backup__as_frm_factory_.zip
I had it on my computer but there's no guarantee that the MD5 thing will work. That seems to break if you move it around too much.

I will get it later, but it appears after sucessfully getting the 3uk RUU from shipped-roms to work (with a downgrade.zip & region.txt), after full reboot, the touch panel has now failed.
If i goto hboot, it simply says TOUCH PANEL-FAIL.
I cannot access the phone at all. The RUU seems to of worked as the 3 logos appears etc, but cant slide the lock screen down to go through the setup.
No problem; its a case of.....'I did a factory reset via phone settings, it rebooted, and this'. Phone going back to 3 store, a new one is coming next week.
3 Store decided to issue new contract, when my Mum went in for an upgrade. They didnt tell her, she ended up phoning 3 as she kept getting SMS saying her balance was going up daily! 3 (on the phone) gave her better deal and said the 3 store do this all the time.
So, ultimately....i won by getting RUU to work, but the phone lost and decided to fail the touch panel to get back at me.
It doesnt even get recognised anymore on the PC, i was going to try a different RUU to see if it was the RUU that casued the fail (which i SERIOUSLY doubt).
Thanks anyways. Not had much joy with this Wildfire....Rooting etc was easy.

need help!
Hi, I've rooted my htc wildfire and after that I got to know that I can't update my phone from htc anymore. I was looking for the ruu file then I found ur post and it is the exact match for my phone. but the link is not working at all..... . could you please upload the file again so I would be able to download it for my phone. will be greatfull....
thanks in advance.
tigger69 said:
Here is a clean nandroid backup as from factory of a 3 uk rom.It has all 3 uk apps,my 3 etc.
It is version-
2.1 update1
Baseband- 13.45.55.24H_3.35.15.31
Kernal- 2.6.29-4266b2e1
Build no.- 1.16.771.3 CL186175
Software number- 1.16.771.3
I have seen a few posts asking for this so thought i would post it.
There is NO personal information in this.
Copy the file to clockworkmod/backup on your sd card and boot in to recovery, and select nandroid restore.
Click to expand...
Click to collapse

Related

[Q] Market Problems? Where's the apps?

Just barely, my market stopped showing... apps, I see like really crap things, but yeah basically nothing. I am running Phoenix 4.1, and haven't had any problems until today, i haven't changed anything... so you know i need a fix,
Mines not working either,
Yeah, not good. I am trying to FBTS and MC.
Same BS that has happened to me three times in last few months and second time in one week! I am so sick of this. Report here:
http://www.google.com/support/forum...6a&hl=en&fid=55c997eccabf0a6a00049adc33b8aed5
sold1erjjt said:
Yeah, not good. I am trying to FBTS and MC.
Click to expand...
Click to collapse
Let us know if that works!
sold1erjjt said:
Yeah, not good. I am trying to FBTS and MC.
Click to expand...
Click to collapse
Already did that. Does not work. Even in stock, you will see you are in a test sandbox for the market. I have been here three times already. The only fix is to report it in the link and wait. Google is really starting to piss me off with this issue.
Yeah and now it sucks because i can't get ROM manager to get clockwork to flash a ROM. Plus i can't download the apk cause my phone can't download unknown sources
yeah tried everything in that thread, and nothing. wasted like 3-4 hours
I just restored my backup, and everything is working as it was.
hmm, yeah im freakin out. it won't work, i've tried everything and its just retarded
sold1erjjt said:
Yeah and now it sucks because i can't get ROM manager to get clockwork to flash a ROM. Plus i can't download the apk cause my phone can't download unknown sources
Click to expand...
Click to collapse
You don't need rom manager to flash clockwork. Second or third post if phoenix has an update.zip. That will get you clockwork recovery
sold1erjjt said:
Yeah and now it sucks because i can't get ROM manager to get clockwork to flash a ROM. Plus i can't download the apk cause my phone can't download unknown sources
Click to expand...
Click to collapse
There have been several cwm update.zip files posted. Just search and find one of them to bypass needing rom manager
Sent from my SAMSUNG-SGH-I897 using XDA App
yeah i got that all figured out, its just now my IMEI number won't freaking change...its at 004999010640000, i have the one that is the right one backed up but, it wont take. if used root explorer, tried the thread on the phoenix rom to back up and restore nv_data.bin and imei, but no luck. I "believe" if i get the IMEI changed the Market will start working. Now if i could have any suggestion that would be fantastic. I've spent all night with no luck. I think the IMEI is half stored on the NV_data.bin, which i don't know how to edit.
Thanks in advanced
Happend to me about a week ago and its happing again but it does fix itself just give it time thats all i did... did all that flashing crap back and forth last time didn't work just had to wait it out about 24-36 hours... sorry....
sold1erjjt said:
yeah i got that all figured out, its just now my IMEI number won't freaking change...its at 004999010640000, i have the one that is the right one backed up but, it wont take. if used root explorer, tried the thread on the phoenix rom to back up and restore nv_data.bin and imei, but no luck. I "believe" if i get the IMEI changed the Market will start working. Now if i could have any suggestion that would be fantastic. I've spent all night with no luck. I think the IMEI is half stored on the NV_data.bin, which i don't know how to edit.
Thanks in advanced
Click to expand...
Click to collapse
I went through this same hell today. Spent about two hours trying to find a fix, and then realized I had some backups in the efs folder that went by the name of ".nv_data.bak".
I backed up the efs folder using ADB, then deleted all the nv* stuff in there except for that one backup, and renamed it to nv_data.bin. I restarted my phone and my IMEI was back to normal (and after a cache deletion from Download Manager, Google Services Provider, and Market, Market worked fine again).
I don't even know why my IMEI was screwed up in the first place.
If you email me your nv_data.bin I can at the very least look at it and see if I can find any glaring problems with it. Send me a PM and I'll send you my email if you'd like.
Yeah i need serious help with this... I tried almost everything. I did this http://forum.xda-developers.com/showpost.php?p=8983897&postcount=103 and it shows its pushing the right IMEI number that starts with a 3. but instead i rebot and its the same 0444 number
also to ensure i did it somewhat right, i pulled the .imei and opened it up in wordpad and it is the right number, so it means something is wrong with my nv_data.bin
Auridran said:
I went through this same hell today. Spent about two hours trying to find a fix, and then realized I had some backups in the efs folder that went by the name of ".nv_data.bak".
I backed up the efs folder using ADB, then deleted all the nv* stuff in there except for that one backup, and renamed it to nv_data.bin. I restarted my phone and my IMEI was back to normal (and after a cache deletion from Download Manager, Google Services Provider, and Market, Market worked fine again).
I don't even know why my IMEI was screwed up in the first place.
If you email me your nv_data.bin I can at the very least look at it and see if I can find any glaring problems with it. Send me a PM and I'll send you my email if you'd like.
Click to expand...
Click to collapse
Thank You so much! you fixed it for me. I've got everything working right now!
sold1erjjt said:
Thank You so much! you fixed it for me. I've got everything working right now!
Click to expand...
Click to collapse
No problem
I'm just glad it worked as it was more of an educated guess than a sure fix
I can't download any apps at all or update them. Its really pissing me off. I click update and nothing happens. I click download and nothing happens. What is the remedy? If any. I'm running Andromeda 1.0 with firebird 2 v.5
Sent from my SAMSUNG-SGH-I897 using XDA App

[Q] JB advice

Hello everyone, im a noob on here and have a stock gingerbread (JW4) but rooted gt-i9000. im past my 24 months and can upgrade my phone at anytime but i love my sgs but am a bit annoyed that sammy are no longer creating firmware updates for it. so i decided to root it with the intention of finding a way of missing ICS and going straight to jellybean.
it seems the only way to go is by installing custom roms, but as im not particularly technical and not understanding the mechanics that well i dont want to / i am scared of messing with the phone without really knowing what im doing. ive heard of kernels but dont know what they are or what they do. ive dabbled with rooting but that is as far as ive got and im not convinced im not gonna break the phone if i go any further!
I got so far (thanks to a senior member on here in other threads) but have stopped for fear of not knowing what im doing and getting something wrong, so im hoping someone out there who's been in my position will be nice enough to help me further.
so basicly im asking for some help to find and install a version of JB that is near enough to what samsung would of supplied. ive seen it on a mates s3 and i like it thats why i want it on my phone, rather than buying the s3 (big brick of a phone)
Thanking anyone who helps in advance.
G.
first of all you shouldn't be afraid to mess your phone. it's really hard do brick it (believe me, i've semi-bricked my phone some times and it's running great now ). besides that, if you follow the tutorials exactly like as it's written you shouldn't get in trouble
second, do you have CWM recovery installed?
Sacob said:
first of all you shouldn't be afraid to mess your phone. it's really hard do brick it (believe me, i've semi-bricked my phone some times and it's running great now ). besides that, if you follow the tutorials exactly like as it's written you shouldn't get in trouble
second, do you have CWM recovery installed?
Click to expand...
Click to collapse
Hi and thanks for your reply! Yes ClockWorkMod root/recovery is where ive got to. The reason i finding this all so daunting is that is no 1 tutrial to follow, everyone seems to have a different way of doing it, either by experimentation or luck, and its just a bit confusing to a complete novice like me. I did try to find a How To section on here but it wasnt easy trying to trawl the 1000s of threads!
geoffjac10 said:
Hi and thanks for your reply! Yes ClockWorkMod root/recovery is where ive got to. The reason i finding this all so daunting is that is no 1 tutrial to follow, everyone seems to have a different way of doing it, either by experimentation or luck, and its just a bit confusing to a complete novice like me. I did try to find a How To section on here but it wasnt easy trying to trawl the 1000s of threads!
Click to expand...
Click to collapse
I was exactly the same at first but now I am on jellybean 4.2 the scariest thing as far as upgrading to jellybean is the error u get wen upgrading cwm wen u first flash the upgrade but just hold the 3 button combo for about 10 seconds an u should be back into recovery it may take a few Trys it did with me then reflash it twice to be sure any problems after that will have answers on their threads so as long as you follow the installation instructions you will be OK
Sent from my GT-I9000 using XDA Premium HD app
the basic procedure to flash a new rom is this:
Put the file in your internal sdcard
Do a Nandroid Backup!
WIPE (wipe data/factory reset + wipe cache partition + wipe dalvik) i also like to go to mount and storage and wipe /data, /datadata, /system, /cache.
flash zip from sdcard
reboot
if you are going to upgrade from froyo/GB to JB i recommend you to flash any ICS rom first (once i have a problem with upgrading from stock GB to MIUI JB
331 saeorge
Thanks everyone for your input.
I took the plunge and braved it and followed a tutorial "for dummies" and a youtube flick that someone had reference to the same tutorial, and decided on CM10 with GAPPS flash, and i now have JB 4.1.2. However i didnt either
1. do ICS first, or
2. do a Nandriod backup
!!!!!!!!
Got me worried now, I wonder if i should of done the ICS first - whats the benefit of this?
Nandriod Backup - what is this?
everything seems to be working fine, but i do have a couple of issues a) no 4x3 keyboard which i use for texting b) poor battery life.
im going to scour this forum for some answers, but if you have any immediate answers that would be very helpful.
Cheers
Geoff.
Thanks everyone for your input.
I took the plunge and braved it and followed a tutorial "for dummies" and a youtube flick that someone had reference to the same tutorial, and decided on CM10 with GAPPS flash, and i now have JB 4.1.2. However i didnt either
1. do ICS first, or
2. do a Nandriod backup
!!!!!!!!
Got me worried now, I wonder if i should of done the ICS first - whats the benefit of this?
Nandriod Backup - what is this?
everything seems to be working fine, but i do have a couple of issues a) no 4x3 keyboard which i use for texting b) poor battery life.
im going to scour this forum for some answers, but if you have any immediate answers that would be very helpful.
Cheers
Geoff.
nand backup is just like saving the stage of your phone before you start to flash it so you can go back if you need to. if you have problem you can always flash a stock rom via odin but you will lose your data.
about the keyboard i don't know if you can have it with ics/jb but try swiftkey x. way better
Sacob said:
nand backup is just like saving the stage of your phone before you start to flash it so you can go back if you need to. if you have problem you can always flash a stock rom via odin but you will lose your data.
about the keyboard i don't know if you can have it with ics/jb but try swiftkey x. way better
Click to expand...
Click to collapse
Oh ok so no immediate panic about Nand backup then, however i prefer to write using XT9 or T9 setup (old skool) ill check out swiftkey see if allows it.
Cheers
geoffjac10 said:
Oh ok so no immediate panic about Nand backup then, however i prefer to write using XT9 or T9 setup (old skool) ill check out swiftkey see if allows it.
Cheers
Click to expand...
Click to collapse
you should make an nand backup now! it's always a good idea to have one
Surprised you never lost your imei jumping from GB to JB missing ICS.
I've jumped like that before, but lost my imei and had no service, I only had to reinstate my efs folder, but it's done that 2 out of 2 times that I've done it. Maybe you were just lucky or something..
Sent from my GT-I9000 using Tapatalk 2
knuckles1978 said:
Surprised you never lost your imei jumping from GB to JB missing ICS.
I've jumped like that before, but lost my imei and had no service, I only had to reinstate my efs folder, but it's done that 2 out of 2 times that I've done it. Maybe you were just lucky or something..
Sent from my GT-I9000 using Tapatalk 2
Click to expand...
Click to collapse
that happened to my once too! my solution was to flash stock GB with odin
Originally Posted by knuckles1978
Surprised you never lost your imei jumping from GB to JB missing ICS.
I've jumped like that before, but lost my imei and had no service, I only had to reinstate my efs folder, but it's done that 2 out of 2 times that I've done it. Maybe you were just lucky or something..
Click to expand...
Click to collapse
Sacob said:
that happened to my once too! my solution was to flash stock GB with odin
Click to expand...
Click to collapse
Oh really??? just checked an my IMEI number is still there and i still have service! Why would jumping do that? More to the point, should i back it up just in case and if so how should i back it up? what if i back it up now on JB, and it misses it when i go back to GB??
....got me worried bout that now!!
geoffjac10 said:
Oh really??? just checked an my IMEI number is still there and i still have service! Why would jumping do that? More to the point, should i back it up just in case and if so how should i back it up? what if i back it up now on JB, and it misses it when i go back to GB??
....got me worried bout that now!!
Click to expand...
Click to collapse
Its usually only jumping from GB to JB that does it. Just use a root file browser, i personally recommend solid explorer btw, go to root, find the folder called /efs and copy and paste it onto your external sd for safe keeping. Its no big problem if you do lose your imei then, just copy and paste it back and overwrite.
Sent from my GT-I9000 using Tapatalk 2
knuckles1978 said:
Its usually only jumping from GB to JB that does it. Just use a root file browser, i personally recommend solid explorer btw, go to root, find the folder called /efs and copy and paste it onto your external sd for safe keeping. Its no big problem if you do lose your imei then, just copy and paste it back and overwrite.
Sent from my GT-I9000 using Tapatalk 2
Click to expand...
Click to collapse
ok done, thanks for the tip fella :good:

TPT ICS NANDROID Backup (rooted w/superuser - completely virgin) and other goodies!!

Hey hey XDA! (ignore the account name, I was 13 years old when I first joined XDA in like '08)
My father bought a refurbished TPT from TigerDirect and literally nothing worked. I factory wiped it and tried to update it so I could get the cameras working and other such things - but no luck. I started to crawl my way through the internet but neither Lenovo nor anybody else seemed to have the answers. I thought that since I was failing the SHA1 hash checks that I might as well start replacing the files and see where it gets me. Five hours later:
First try to restore my ICS nandroid backup, but if not, follow the mini-guide below! Also look at the end of the post for all my files!
For those of you that can't update because you're failing assertion checks:
Root your current version with one of the root tools in my package. Go to your advanced properties and see which Lenovo internal version you're running "0089, 0075, 0060, etc". There are three toolkits that I included and they all work; use the one for your version.
Flash the Ventana CWM.
Do a nandroid restore through CWM by going to backup->restore. It's going to wipe and install a clean 0075 Honeycomb build.
Root again, the pre 0089 package should be a relatively easy root to do.
Restore the factory recovery. I have one fresh from my tablet and one that I found floating around on the internet. You could use either (the one floating around worked fine for me, but if you want something 'newer' just use mine).
Connect to a WiFi network and check for updates. This is the part where it might get tricky. Not all of the files in the 0075 build that I attached were original (it wasn't my build, not my fault). If you get an assertion check, look at your error and see which file has failed. I only had to replace three files, gps.conf, Generic.kl, and the busybox binary. This theoretically should be the same for you. Try to update without replacement, and as the updates start to fail replace the files that are causing failure. The ones you need are attached in my bundle, but I have others too - so let me know if you'll need them!
By this step you should be on the ICS update. Root using the debugfs kit (in the ICS folder for rootkits) and then flash Koshu's recovery (which only worked for me on ICS). Do a backup. Live a happy life.
This procedure isn't meant to be very 'easy'; I am just attempting to make your inconsistencies match mine so they can be fixed in the same manner. A quick Google search showed me that a lot of people are missing different files with barely any files available. Everything I have was extracted from official packages from previous versions. I think I managed to 'get lucky'.
You can find everything that you need on my website. I won't ever take this down save for a plane crashing into the datacenter where it's hosted. There are copies of all the files I mentioned in this tutorial and even copies of Lenovo's official updates since their servers go down more than Kim Kardashian.
Go to http//davidstancu.me/TPT
I'm also working on a small Android app to replace these files to the factory files (kind of like the way Windows has sfc /checknow or whatever that command is. I would also like to extend a massive thank you to everybody who made the tools that I used to get this done.
Since my account doesn't have 10 posts yet I can't post a link, so you'll have to manually include the colon. Sorry
What is your tablet version? US? ROW?
I am looking for 16 US version.
i have inadvertantly deleted my original ics files when upgrading to Koshu's JB. I need to restore the stock ics so would like to use your cwm restore files.I've downloaded the files but the md5 check doesn't work.I assume it's only because i need the actual name of the folder these files are saved in the cwm backup folder. can you please either post it or email it?
smiley1960 said:
i have inadvertantly deleted my original ics files when upgrading to Koshu's JB. I need to restore the stock ics so would like to use your cwm restore files.I've downloaded the files but the md5 check doesn't work.I assume it's only because i need the actual name of the folder these files are saved in the cwm backup folder. can you please either post it or email it?
Click to expand...
Click to collapse
'
don't worry. I just created a new blank nandroid.md5 file and it took.Unfortunately, my TPT would not boot up. It just stuck at the Lenovo logo. Any suggestions to get it working?
My guess is that a file was corrupted. Try redownloading?
Thank you so much for the detailed guide and the files! My TPT came with a strangely named bladenct...0037_0001 (US) firmware so I couldn't have updated to ICS otherwise.
In other words, confirmed working for a US 16GB TPT. :good:
BrazenRain said:
Thank you so much for the detailed guide and the files! My TPT came with a strangely named bladenct...0037_0001 (US) firmware so I couldn't have updated to ICS otherwise.
In other words, confirmed working for a US 16GB TPT. :good:
Click to expand...
Click to collapse
Based on that version number I'm curious... is that a TPT from Tigerdirect? Is the model number 1839AJ6 or 1839AD7?
US vs ROW
da_reeseboy said:
My guess is that a file was corrupted. Try redownloading?
Click to expand...
Click to collapse
Damn.I justchecked the build.prop and the ICS nandroid backup is for a US version. I've got a ROW version.
Anyone out there got an ICS nandroid ROW backup I can use? I'd really appreciate the help.
smiley1960 said:
Damn.I justchecked the build.prop and the ICS nandroid backup is for a US version. I've got a ROW version.
Anyone out there got an ICS nandroid ROW backup I can use? I'd really appreciate the help.
Click to expand...
Click to collapse
Maybe this can help you - http://forum.xda-developers.com/showthread.php?p=37330646#post37330646
da_reeseboy said:
Based on that version number I'm curious... is that a TPT from Tigerdirect? Is the model number 1839AJ6 or 1839AD7?
Click to expand...
Click to collapse
I bought it second-hand (and it seems to have had quite a rough life as is cut out for a ThinkPad), but it's an 1839AD7.
BrazenRain said:
I bought it second-hand (and it seems to have had quite a rough life as is cut out for a ThinkPad), but it's an 1839AD7.
Click to expand...
Click to collapse
Thanks for the reply. I am trying to help another member get his up to ICS, and he has the same weird software version. Did you restore the nandroid or follow the mini guide?
I used the mini guide. Unlike the original poster, I found nothing broken in the stock software. The rear camera has some serious magenta artifacts on the side but that remained in ICS and CM10 so I'm guessing that's hardware damage. (This tablet seems to have been through a lot. Thus I got it at a reasonable price from ebay.)
Awesome! Thanks again for replying.

[Q] HTC M7 Dev Edition *Factory Rom Lost*

Hey everyone new poster to the forums here . Have a question about loosing the stock ROM for my HTC M7 Dev edition. I made the backup but I think when I formatted I formatted more then I should have because when I pull up TWRP recovery mode to restore a backup nothing is listed in the window. However when I go into the internal storage in windows on my computer with the phone connected and look inside HTC One\Internal storage\TWRP\BACKUPS I found a folder called HT34GW9xxxxx and a sub directory with a date on it and it looks like the date that I did the flash in the first place. That folder also has 13 files in it equaling out to 4.25GB in size. So basically what I'm getting at is how come I can see this folder here but not in recovery and even if I could see it in recovery this seems like it's not large enough to be HTC Sense 5.0 according to this thread and the downloads attached to it.
http://forum.xda-developers.com/showthread.php?t=2248997&highlight=nandroid
Also speaking of that thread considering the original M7 Dev rom is gone can I use that thread to restore my phone even though I am using TWRP and not clockwork. I'm not the greatest at these type of things, I don't want to brick my phone, and I never have enough time invest in this stuff. If I knew this was going to happy I probably wouldn't have done it in the first place lol.
Thank you in advance and sorry if this has already been talked about, I did a search but I must have skipped over it if it was already out there :\.
dont worry if u have htc one 64gb dev edition go to htcdev..com and download ruu file lock the bootloader and run ruu thats all
Follow up
ccpzcp said:
dont worry if u have htc one 64gb dev edition go to htcdev..com and download ruu file lock the bootloader and run ruu thats all
Click to expand...
Click to collapse
Thank you for the help. A follow up question would be is there a place to get someone's previous backup and download it like the link I put up in the previous posts user did. I really don't want to lock the boot loader and I would love to just be able to easily get Cyanogenmod back on the phone easily. Reason being is that right now the Cm camera just isn't up to pay with the Sense camera software and if I go to an event like I am tonight I would like to be able to swap back and fourth.
TWRP and CWM backups aren't compatible with each other. You'd have to flash the relevant recovery to use a corresponding backup.
You still have your backup though. You said as much in your OP. You just need to go into TWRP settings and specify the default location for your backups.
As mentioned above however, you can just flash the official RUU to return to stock
Thanks a ton!
Just wanna say thanks to the both of you for your help. I went with option 2 for now because I want to switch back to CM after the Cardinals MLB game tonight. I never lost the backup and you were right I just had to find the folder. It was weird I didn't see any button to search for a folder kinda odd how TWRP is layer out in that interface. Yet I found the backed up file and took about 10 minutes from start to finish. The device is still unlocked to so I can reflash CM when I'm ready.
A little off topic but does anyone know what the difference between the GSM Cyanogenmod ROMs and the AT&T ROMs are? I have the Dev version but flashed the AT&T version and it ran fine made calls and had no data transfer issues at all.
Ok so I actually started having issues after that last post. What was happening was I kept getting this HTC system update my guess the Camera software update but whatever. So I clicked on the update now and it downloaded like normal then reboot. After it reboot it booted into TWRP recovery well at that point I didn't know what to do so I just went a head and rebooted into System. Well here is where the issue started it said again system update avalible ok great install, same deal it just booted back into TWRP after the download. Back into system I went and again same thing.
At this point I desided to go into TWRP and do a system restore and I thought that worked cause it wasn't notifying me immediately after the launcher loaded to install the update. So I checked for it manually and of course there was one. Tapped on Install it downloaded and asked to reboot so I did...
SAME ISSUE AHHHHGGG! Lol
This will be the end of me haha.
Is there something I'm missing here? Can I not have root access or a a third party boot loader like TWRP or both modifying the system. What am I missing?
Ok thanks again, sorry for the multiple posts I'm just so frustrated at this point.
Sent from my HTC One using xda premium
This my very wild guess. Try flashing stock recovery first and then install the OTA update again. That's just my wild guess I'm not saying it will 100% work.
No luck
shadowboy23 said:
This my very wild guess. Try flashing stock recovery first and then install the OTA update again. That's just my wild guess I'm not saying it will 100% work.
Click to expand...
Click to collapse
Nope no luck
Hopefully this helps..
What I did find was this link here...http://forums.androidcentral.com/htc...ml#post2827047 that's where someone else is having the same issue but on Sprint I'm guessing. So that doesn't really apply to me. However a poster further down the thread gave another link to all these "nandroid?" files. I'm not really sure what a nandroid is haha I'm such a noob at this. Basically what they are saying is that unrooting it then i guess somehow putting this "nandroid" file on it somehow. Anyone have any idea on this. I'm terribly sorry for my noobishness but I'm trying to learn all this and it's really frustrating at first..
Here's the link to the nandroid files. http://forum.xda-developers.com/show....php?t=2207874 funny thing is that I actually found that link on Android Central website so that I could come back here and repost about it again heh. Anyways does that look like something that might fix the issue that I'm having?
Even if this file does help I have no idea what to do with it but that first link seemed to have some video's attached to it although I worry about following them because it's for Sprint and I really don't want to brick my phone. (another reason I am being so careful) You pay over 600 dollars for a device you tend to be super careful with anything you do with it.
Nvidiafanboy said:
Nope no luck
Click to expand...
Click to collapse
Sorry about that.
All fixed!!
Ok so I got it. I ended up finding this http://qbking77.com/development/how-to-unrootunbrick-the-htc-one-to-stock-2/
Worked great fixed everything. Linked to the RUU on HTC Dev website also so its official.:good:
So basically if Anyone need to restore to factory from a mess they have made follow this guide it works perfectly and he does an execelent job of describing how to do it in a video he posted step by step.

[Q] RUU

Hi, I did a lot of things with my One Mini 2 and I actually really don't know what to do anymore... So much options and yet there always seems to be a problem. Let me explain everything.
What I did:
-flashed a custom rom, then went back to a stock rom of this forum
-flashed the dt2w kernel, it messed up my phone so I then flashed the liberty one, which worked
But with the liberty one I had some memory problems, for exemple I couldn't take screenshots... That's why I decided that I wanted to put my phone just as it was when I bought it, I really hope that's possible, by that I mean having official firmwares etc, therefore being able to do official upgrades from my phone (is that what OTA is?).
I looked on internet and it looks like what I need is RUU, as it includes everything (from what I understood)... I know a lot of threads were made about this, but quite a few months ago, so that's why I'm making a new one, and to make things clear.
Also, I downloaded an official kernel from htcdev.com, but each time I tried flashing it with TWRP, it "failed".
So, if you guys have an answer, solution or, in best case, the actual RUU, that would be great.
Thanx
Linkalex1 said:
Hi, I did a lot of things with my One Mini 2 and I actually really don't know what to do anymore... So much options and yet there always seems to be a problem. Let me explain everything.
What I did:
-flashed a custom rom, then went back to a stock rom of this forum
-flashed the dt2w kernel, it messed up my phone so I then flashed the liberty one, which worked
But with the liberty one I had some memory problems, for exemple I couldn't take screenshots... That's why I decided that I wanted to put my phone just as it was when I bought it, I really hope that's possible, by that I mean having official firmwares etc, therefore being able to do official upgrades from my phone (is that what OTA is?).
I looked on internet and it looks like what I need is RUU, as it includes everything (from what I understood)... I know a lot of threads were made about this, but quite a few months ago, so that's why I'm making a new one, and to make things clear.
Also, I downloaded an official kernel from htcdev.com, but each time I tried flashing it with TWRP, it "failed".
So, if you guys have an answer, solution or, in best case, the actual RUU, that would be great.
Thanx
Click to expand...
Click to collapse
Still no RUU's avaiable as HTC wont release them. your best option is to use TWRP backup and restore.
Original stock backup
Thank you, but my backup kind of disappeared... I saw your post where there was the "HTC Original Backup.zip", I tried to flash but again it failed... Am I supposed to flash it as a backup?
Linkalex1 said:
Thank you, but my backup kind of disappeared... I saw your post where there was the "HTC Original Backup.zip", I tried to flash but again it failed... Am I supposed to flash it as a backup?
Click to expand...
Click to collapse
You need to send it as it is to your phone and use TWRP > restore. choose file and done.
Thanx so much for answering... I uses the backup you told me to. Although I had to use the "install" option instead of the backup one, it now works perfectly! But how do I know if my phone is "official"? Are the upgrades going to be made straight from the phone?
Linkalex1 said:
Thanx so much for answering... I uses the backup you told me to. Although I had to use the "install" option instead of the backup one, it now works perfectly! But how do I know if my phone is "official"? Are the upgrades going to be made straight from the phone?
Click to expand...
Click to collapse
Yes OTA updates should work just fine. just look for updates in settings>about >software update.
you may have one for polaris office.
Hi, I just want to check this too before I screw up wife's phone..
She has CM12 on her phone now as I replaced recovery as well as unlocking bootloader. Now she wants it back to stock as too many things crash on her. I get that I can install your backup but what worries me is that other posts have said you need the stock recovery to allow for OTA updates to work and the link to this no longer works.
She MUST have OTA updates or my balls will be removed, so can you please confirm this, but also explain why.
Thanks (on behalf of my testicles and unborn children!)
(Oh, and she wants it unrooted ant the bootloader relocked)
arm1e said:
Hi, I just want to check this too before I screw up wife's phone..
She has CM12 on her phone now as I replaced recovery as well as unlocking bootloader. Now she wants it back to stock as too many things crash on her. I get that I can install your backup but what worries me is that other posts have said you need the stock recovery to allow for OTA updates to work and the link to this no longer works.
She MUST have OTA updates or my balls will be removed, so can you please confirm this, but also explain why.
Thanks (on behalf of my testicles and unborn children!)
(Oh, and she wants it unrooted ant the bootloader relocked)
Click to expand...
Click to collapse
Stock Recovery
To unroot just lock bootloader:
fastboot oem lock

Categories

Resources