i have samsung P1000 it had a software without the language i want
i used odin to install the new software which i download from www.sammobile.com
i open odin and i first choose PIT (gt-p1000_mr.pit) and i checked Re-Partion - Auto Reboot - F. Resit Time and put the PDA which i download from www.sammobile.com
everything goes right till it reach "modem.bin" the FAIL!
i tried other PDA same problem
i tryed also GB-Stock-Safe-v5 same thing
alsso i only use PDA and CSC
i went also to recovery and it gave me "E:Error in /cache/recovery/sec_csc.zip" every single time
im trying and google for 7 hours now
i need help to fix this problem
seriously 37 view no reply?
hamood_d10 said:
seriously 37 view no reply?
Click to expand...
Click to collapse
Are you trying to root your device?
Search for tje overcome thread by sos_sifou...it should work..and use the latest version of odin
Sent from my GT-P1000 using xda app-developers app
---------- Post added at 08:42 PM ---------- Previous post was at 08:41 PM ----------
Search for tje overcome thread by priyana...it should work..and use the latest version odf odin
Sent from my GT-P1000 using xda app-developers app
Related
I have been looking for two days now for how to get ics on my sprint tab. I see people have it and I have tried to flash it and failed.I read it may be because I have an older cwm. 4.09 or something like that. I want to get ics on here sooooo bad. I very experienced with flashing roms and rooting and all the goodies so I don't need anyone to hold my hand but some links on how to do it or what ill need to do it would be amazing. I can't figure out how to get newer cwm and ics. Help and links would be amazing thank you
Sent from my SPH-P100 using XDA App
you could try here
it works for me.
I looked at that one and tried to flash it but every time I try to flash it says installation aborted from what I gather its because I have a old version of cwm. What version r u on?
Sent from my SPH-P100 using XDA App
post 380 on page 38 of that thread gives the link to the right cwm version and instructions for install.
fabs109 said:
I have been looking for two days now for how to get ics on my sprint tab. I see people have it and I have tried to flash it and failed.I read it may be because I have an older cwm. 4.09 or something like that. I want to get ics on here sooooo bad. I very experienced with flashing roms and rooting and all the goodies so I don't need anyone to hold my hand but some links on how to do it or what ill need to do it would be amazing. I can't figure out how to get newer cwm and ics. Help and links would be amazing thank you
Sent from my SPH-P100 using XDA App
Click to expand...
Click to collapse
I think the humberos kernel have the new cwm. After you flash the kernel you can flash the kang or slims ics!!!!they are really great!!!
Hope i can help you........
Rickxx thank you so much! I'm on ics on my tab it is amazing honestly thank you so much for pointing me in the right direction its like a new tablet.was so sick of it now I can't put it down thanks again man
rickxx2000 said:
post 380 on page 38 of that thread gives the link to the right cwm version and instructions for install.
Click to expand...
Click to collapse
Sent from my SCH-I800 using XDA App
Just to verify the link above on pg 38 post 380 does give the right way to do it. I had never used heimdal I always use Odin and I couldn't get heimdal to work for a couple hours so I gave up and said screw it and ran the tar through Odin and it worked! My screen did goofy stuff but all I had to do was boot into the new recovery and wipe 3 times each data and cache and delvik then flash team hacksun then flashed patch then rebooted and then went back into recovery and flashed gapps.
I swear this tablet was made for ics it never ran this well. A whole new tab is a understatement. Thanks to all the devs and rickxx for guiding the way
Sent from my SCH-I800 using XDA App
Yessss.im excited to get this also.arevyou able to use all the functions? THANK YOU SO MUCH
Sent from my SPH-P100 using XDA App
Get silent camera to make the camera work u can get it from market. But I haven't had any other problems it honestly works better than ever
Sent from my SCH-I800 using XDA App
Which rom did you flash?i literally fixing to do it now.just dont want any issues.wifi is okay? Thanx buddy
Sent from my SPH-P100 using XDA App
---------- Post added at 05:05 AM ---------- Previous post was at 04:51 AM ----------
if i use odin wheredo i put this file for cwm5
---------- Post added at 05:30 AM ---------- Previous post was at 05:05 AM ----------
im using an old laptop running xp.Dont askwhy!!! lol how can i get drivers so I can use odin? Im stuck!!Help.....
---------- Post added at 06:04 AM ---------- Previous post was at 05:30 AM ----------
got cwm5 now how the heck do igetthe files on the sdcard.It wont let me unlock the screen.smh...testing my patience.lol
Sorry for all the questions.lol got it all worked out. So which ice is the best one out so far and whatsw the ugly keyboard
Sent from my SCH-I800 using XDA App
rjumawan said:
Which rom did you flash?i literally fixing to do it now.just dont want any issues.wifi is okay? Thanx buddy
Everything including wifi works u will need silent camera from market for camera to work. The from is the one from link above
---------- Post added at 05:05 AM ---------- Previous post was at 04:51 AM ----------
[/COLOR]if i use odin wheredo i put this file for cwm5.
Put the tar in pda
---------- Post added at 05:30 AM ---------- Previous post was at 05:05 AM ----------
im using an old laptop running xp.Dont askwhy!!! lol how can i get drivers so I can use odin? Im stuck!!Help.....
Just download Odin from the same place you rooted your tablet and drivers u should have from rooting as well
---------- Post added at 06:04 AM ---------- Previous post was at 05:30 AM ----------
got cwm5 now how the heck do igetthe files on the sdcard.It wont let me unlock the screen.smh...testing my patience.lol
Click to expand...
Click to collapse
Lol I had the same problem just hold power button til tablet shuts off and boot into rocovery /volume up and power and your golden
Sent from my SCH-I800 using XDA App
Use the rom that rickxxx posted link to. Idk what u r talking bout ugly keyboard. Ics keyboard?
Sent from my SCH-I800 using XDA App
What kind of apps are you running that are for ics only
Sent from my SCH-I800 using XDA App
google chrome browser is about it
Sent from my SCH-I800 using XDA App
Yo fabs.are you running the kernal that was posted along w ics.I just ran rom and gaps.but battery life sucks balls.lol
Sent from my SCH-I800 using XDA App
Know what i didnt flash kernal. Im at 1day 7hrs and 9 mins on my tablet right now and ive been playing with it alot. I play on it more then my phone now it runs amazing. Whats you battery life like. How ling are u getting without charge
Sent from my Galaxy S II Epic Touch 4g using XDA App
Well somethjng was draining it so I wiped and reflash.so far so good.can't stand that the camers doesn't work.silent photo pics look like crap.going to hunt for another ics rom.
Sent from my SCH-I800 using XDA App
I'm a total noob. Wish I could find a good set of instructions that list from start to finish how to do this. Searching seems to bring up a million different methods and I'm completely confused :-(
The 2nd and forth post literlly walk you fhrough it.cant get easier than that.
Sent from my SCH-I800 using XDA App
Hello.
I have a gt-n7000 .
And I have ****ed it up.
I dont know if it is bricked or.... anything else.
How do I check what is wrong with it ?
I have tried to install new stock rom from odin, both GB and ICS,
But both fail.
I can enter both download mode and recovery mode.
But if I just turn on the phone the "samsung galaxy note" screen never go further.
Would be REALLY happy if anyone have an clue or anything.
Have also tried to re-partion the pit files, that worked.
I can also addd a bootloader with odin.
But when trying roms, it just take like forever on the NAND WRITE.
I honestly dont really know what Im doing..
u have the same issue like this. read on
http://forum.xda-developers.com/showthread.php?t=1661590
Sent from my GT-N7000 using xda premium
---------- Post added at 11:51 PM ---------- Previous post was at 11:45 PM ----------
just repartions won't work. The system partition mite be corrupt and now u need to create a new one.
Sent from my GT-N7000 using xda premium
Don't go repartition ing just yet....
What rom are you on, what steps did you take that caused the issue? Are you rooted with cwm or custom kernel? Need a lot more info.
Sent from my GT-N7000 using xda app-developers app
did you do wipe data (full wipe) on stock kernel in ICS ?
Sent from the corner of this rounded earth
I have tried to upgrade the firmware to Jelly Bean, I followed all the steps using odin, I got "PASS" but when the phone reboots the previous firmware is restored, the same when I tried to root it. I didn't get any error.
Could somebody give me any suggestion?
Android version: 2.3.6
Baseband: I9070VJLD1
And what file are you trying to flash? And if you flashed just 1 file make sure to put the file in PDA when inserting in Odin
Sent from my GT-I9070 using xda premium
Jeroenvk94 said:
And what file are you trying to flash? And if you flashed just 1 file make sure to put the file in PDA when inserting in Odin
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
I've tried with this one: I9070VJLD1_I9070-ZTMLD1_I9070VJLD1_HOME.tar.md5
Also I've tried with rootkernel.tar.md5 when I was trying to root to install CWM.
Always unsing PDA option and following the instructions.
manucodear said:
I've tried with this one: I9070VJLD1_I9070-ZTMLD1_I9070VJLD1_HOME.tar.md5
Also I've tried with rootkernel.tar.md5 when I was trying to root to install CWM.
Always unsing PDA option and following the instructions.
Click to expand...
Click to collapse
that firmware is for gingerbread..
find file with XXLQ4 or XXLQB.. these two are jellybean firmwares..
here is the link: http://www.sammobile.com/firmwares/#firmware
---------- Post added at 01:14 PM ---------- Previous post was at 01:13 PM ----------
fyi.. these are russian and serbian firmware, respectively..
manucodear said:
I've tried with this one: I9070VJLD1_I9070-ZTMLD1_I9070VJLD1_HOME.tar.md5
Also I've tried with rootkernel.tar.md5 when I was trying to root to install CWM.
Always unsing PDA option and following the instructions.
Click to expand...
Click to collapse
Ur file name says VJLD and ur baseband is also VJLD and is gb. Doesn't this ring a bell or something? Look through the SGSA General section and you'll find JB firmware.
Sent from my GT-I9070 using xda premium
Reply
link for the thread http://forum.xda-developers.com/showthread.php?p=40243529#post40243529
Sent from my ST25i using xda premium
Hi, i lately unlocked my SGS to use it with my SIM card (got it from my cousin, she had it on contract with other SIM)
Flashed SAUROM, had no problems with it, till it somehow didnt show anything on the notification drawer (no icons for activating/deactivating data, w-lan, bluetooth, etc. and no notifications, it just was blank), well, reflashed it then, it worked again, but then i wanted to change ROM to a 4.2 ROM, and thats where it somehow went wrong, now i only can flash CM, AOKP and AOSP ROMs (only tried up to ICS/CM 9) but they work without trouble...yet i cant install any MIUI or stock/touchwiz ROM anymore
I even cant restore a nandroid backup, the message i get is in the 2nd attachment
Also trying to get back to stock via ODIN and following files:
CODE_I9000XXJVU_CL851880_REV03_user_low_ship.tar.md5
MODEM_I9000XXJVU_REV_00_CL1092175.tar.md5
GT-I9000-CSC-MULTI-OXAJVU.tar.md5
wont work either, message in 1st attachment
Now, i really dont have any plan what went wrong or how it went
Hope one of you guys gets it :fingers-crossed:
Greets Vauvenal7
where is ur pit file?
Read here for more info.
http://forum.xda-developers.com/showthread.php?t=2149455
rite now ur on devil kernel?
Sent from my GT-I9000 using xda premium
---------- Post added at 03:13 AM ---------- Previous post was at 03:11 AM ----------
n in saurom rom, u can set da notification or status bar to be completely empty. i think there is nothing wrong with da ROM. n mount system to format it in recovery
Sent from my GT-I9000 using xda premium
Edit : Just do what compacity say
compacity said:
where is ur pit file?
Read here for more info.
http://forum.xda-developers.com/showthread.php?t=2149455
rite now ur on devil kernel?
Sent from my GT-I9000 using xda premium
---------- Post added at 03:13 AM ---------- Previous post was at 03:11 AM ----------
n in saurom rom, u can set da notification or status bar to be completely empty. i think there is nothing wrong with da ROM. n mount system to format it in recovery
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
Been there only cus i had the cernel as a flashable tar file, now i am back on CM9
Well, these are all the files i needed for rooting it, also got it back from a brick via these files only
But nevertheless i will try that tutorial and keep you updated
Thanks for the quick reply
Greets Vauvenal7
Sent from my SGS i9000
Yeah, just wanted to say thanks!!!
It worked
Greets Vauvenal7
Sent from my SGS i9000
Vauvenal7 said:
Yeah, just wanted to say thanks!!!
It worked
Greets Vauvenal7
Sent from my SGS i9000
Click to expand...
Click to collapse
cup of coffee please
Sent from my GT-I9000 using xda premium
Im flashing the stock firmware and Im getting the Pit error, I tried to flash oher stock rom but im getting the same error everytime! I need help, if you know how can I fix this im going to be here
Thanks!
Sent from my D2305 using XDA Free mobile app
Alfred1516 said:
Im flashing the stock firmware and Im getting the Pit error, I tried to flash oher stock rom but im getting the same error everytime! I need help, if you know how can I fix this im going to be here
Thanks!
Sent from my D2305 using XDA Free mobile app
Click to expand...
Click to collapse
Are you flashing in odin? Did or do you have the re-partition box checked? It should have never been checked. If you did then you need to find the .pit file for your device.
---------- Post added at 06:46 PM ---------- Previous post was at 06:44 PM ----------
Read this post
http://forum.xda-developers.com/showthread.php?t=2686042
I tried without once without the .pit and got the same error, after I tried with a .pit obtained here on XDA and Odin stays on Ser partition and anything happens
Yes im using ODI
Sent from my D2305 using XDA Free mobile app