Related
Hello guys I have black with stock rom I want to install custom rom CM9
Code:
http://forum.xda-developers.com/showthread.php?t=1650537
Install CM9 on black:
Instructions:
Download the FreeOptimusProject-xxx.zip
Backup your /data contents: contacts, apps, sms, etc. or backup via recovery
Enter CWM and:
- Select 'backup and restore -> Backup' (not necessary but recommended)
- Select 'wipe data/factory reset' (Obligatory)
- Select 'wipe cache partition' (Obligatory)
- Select 'advanced/wipe Dalvik cache' (Obligatory)
- Flash the FreeOptimusProject-xxx.zip. To do this, Select 'install zip from sdcard -> choose zip from sdcard' and select the FreeOptimusProject-xxx.zip
Reboot (first boot will take ~3 mins)
but I should install recovery mode first
Code:
http://forum.xda-developers.com/showthread.php?t=1098083
How to install recovery mode:
1. Extract ZIP-File to your Local Computer
2. Connect the Phone with USB-Debugging enabled
3. Run The File install_recovery.bat (on Windows Systems) or install_recovery.sh(on Linux Systems)
4. Grant Root Access on the Phone
also but I should get the root access first
but how i used gingerbreak but it doesn't success
in my previous phone I flashed other firmware then I rooted it but in black I don't know how to flash this fw (before,I was using kdz uploader) and what is the good fw for rooting then flashing new rom
please quickly
thnx in advance
hemo-ali said:
Hello guys I have black with stock rom I want to install custom rom CM9
Code:
http://forum.xda-developers.com/showthread.php?t=1650537
Install CM9 on black:
Instructions:
Download the FreeOptimusProject-xxx.zip
Backup your /data contents: contacts, apps, sms, etc. or backup via recovery
Enter CWM and:
- Select 'backup and restore -> Backup' (not necessary but recommended)
- Select 'wipe data/factory reset' (Obligatory)
- Select 'wipe cache partition' (Obligatory)
- Select 'advanced/wipe Dalvik cache' (Obligatory)
- Flash the FreeOptimusProject-xxx.zip. To do this, Select 'install zip from sdcard -> choose zip from sdcard' and select the FreeOptimusProject-xxx.zip
Reboot (first boot will take ~3 mins)
but I should install recovery mode first
Code:
http://forum.xda-developers.com/showthread.php?t=1098083
How to install recovery mode:
1. Extract ZIP-File to your Local Computer
2. Connect the Phone with USB-Debugging enabled
3. Run The File install_recovery.bat (on Windows Systems) or install_recovery.sh(on Linux Systems)
4. Grant Root Access on the Phone
also but I should get the root access first
but how i used gingerbreak but it doesn't success
in my previous phone I flashed other firmware then I rooted it but in black I don't know how to flash this fw (before,I was using kdz uploader) and what is the good fw for rooting then flashing new rom
please quickly
thnx in advance
Click to expand...
Click to collapse
search for 20o patched bin and fls files and flash them with smartflash and from there flash any ROM you like.
CM9 is not suitable as an everyday rom, try another one, personally I will recommend you CM7 or Zeus(thou I dont know if the have LTR support).
In face I rooted it by unlock root before then I flashed the cm9
I detected the errors then I re-flashed the stock rom with smart flash tool
but now I want to root again I can't
why???
also is cm7 stable and can I download it from cm website directly or where can I download it??
is cm7 supports rtl support(especially arabic)??
Is cm7 have thread in this forum??
Patched v20o comes with cwm recovery so from there you can flash any rom, yes you should.always get cm from official site or look for temasek kang in general forum.
FDN
re4lsk said:
Patched v20o comes with cwm recovery so from there you can flash any rom, yes you should.always get cm from official site or look for temasek kang in general forum.
FDN
Click to expand...
Click to collapse
hey I flashed v20O but unlock root doesn't success to root it why???
oh sorry i didn't download patched one
now I will download patched V20b(no matter which one)
I want it only to flash cm7 and in future cm9(when bugs are fixed by our heros)
thnx all wait for my feedback
I flashed it successfully thnx but when I used cm7 rom I don't have market and when I installed it Now I cannot add gmail account why??
Done I flashed the gapps zip file thnx
Sent from my LG-P970 using XDA
Finally, I finished creating my scripts & kernel for booting a rom on SD Card. Dual boot kernels, preinstalled roms, setup scripts, instructions are available below.
How to make a rom on SD Card
Requirements: 3.1 GB of free space on your internal SD Card.
New method to set up the rom, fast and easy. You can now boot 5 different roms
Here is some new kernels you can try, but the setup in the Aroma v2.3c package below
PhilZ-cwm6-XXLS7-XJB-3.1-dualboot.zip (support only TW JB roms)
http://www.mediafire.com/?os6zi3u2mpe6yih
PhilZ-cwm6-XXLS2-XJB-2.7-dualboot - thanks to Phil3759 (support only TW JB roms)
http://www.mediafire.com/?k574667whh3c6qk
Hydracore v6.2 beta3 OC - dualboot kernel
http://www.mediafire.com/?0w852y7hl5yf8k8
Hydracore v5.4 - dualboot kernel
http://www.mediafire.com/?iawqi5picfcb9sm -STD
http://www.mediafire.com/?w18xigwkd9ya4no -OC
Download this current Aroma version
Version 2.3c http://www.mediafire.com/?5ym62wr7kta1u2o
- Added Timeout 15 seconds for the Boot Menu
- Fixed issue with the rom3 external in the Boot Menu
- Added Option to fix root in page 2 of the tools section.
Version 2.3b http://www.mediafire.com/?g3g8hdc2n0j3u9v
- Added Hydracore v4.3b kernels
- For some users, if you don't see the bootsdrom.cfg in the \sdcard\SDRoms folder, simply extract it from the Chuan_Dualboot_Aroma_v2.3b.zip (in the Default folder) and put the bootsdroms.cfig in the \sdcard\SDRoms to enable the dualboot roms.
- For some users, if you want to show the boot menu, you can put an empty file named "bootmenu_on" in the \sdcard\SDRoms folder.
Version 2.1b http://www.mediafire.com/?7aqibjh5nhgnh6m
- Added Hydracore v4.1b kernels
- Possible fix for the bootsdrom.cfg not being extracted for some users
Version 2.0 http://www.mediafire.com/?y0gsnzmwb7e8r6z
- Added Hydracore v3-5 kernels
- Fixed issue setting up the rom partition images on the external SDCard.
Version 1.9-1 http://www.mediafire.com/?foumtinhrhid2c6
- fixed the issue that the STD kernel always being flashed when select the OC one.
Version 1.9 http://www.mediafire.com/?ykvjahj8d32pcdv
- Added Hydracore v3-1 both OC and STD versions.
- Add boot menu options. This can be turned on and off in the "Set Default Booting Rom" section in the dualboot Aroma.
- More checking in the mount partitions tool to make sure we don't mess-up the phone rom. Again, if you see any error, don't flashing any rom/mod, otherwise it will mess up the main phone rom.
Version 1.8 http://www.mediafire.com/?lpxesvw31u3es6a
- Use a new method to mount the partitions for a rom on SDCard. Now you can directly flash new roms without messing up the phone rom.
- Clean up other versions, they seem to be obsolete now.
How to setup and flash a new rom for booting from SDCard
Please follow the instructions below, this is the most easiest ever!!! There is no need to modify the rom or mod before flashing with my tool.
1. Back up your data (just in case)
2. Reboot to recovery and flash Chuan_Dualboot_Aroma_v1.8.zip
- Select Tools section. Then select the rom slot you want. If this is the first time you use that rom slot you need to setup system, data, and cache images for the rom. In page 1 of the tool, check "Setup System" and "Setup data & cache" to setup the images. You need to do this only one time
- In page 2, select "Wipe system", "Wipe data", and "Wipe cache"
-And the most important one, select "Mount Partitions". Don't forget to select "Mount Partitions" otherwise it will overwrite the data and mess up your phone rom.
-Press Next until complete, and don't reboot the phone. (If you see any error, reboot in to recovery and try again)
3. Make sure you don't see any error in the step 2. then you can now flash any rom you like as normal. It will be flashed to the rom slot you just select in the step 2. Don't reboot after complete because you need to flash a dualboot kernel after.
4. Flash Chuan_Dualboot_Aroma_v1.8.zip again, then select "Set Default Booting Rom", then select the same rom slot in step 2.
- Then select "SDCard" as default, and select "Don't Share"
- Then click "Yes" for the popup "Flash a Dualboot Kernel?" to flash a dualboot kernel. You have to flash a dual-boot kernel because in step 3, the kernel has been changed after flashing a new rom.
- Next select "HydraCore v1-7" this can boot most roms, Or you can choose "Goku v1.5-11" only CM9 & TW.
- Click "Next" till the end, and reboot the phone.
5. Now the phone should boot in to a rom on your SDCard.
Tips: To switch the rom, flash Chuan_Dualboot_Aroma_v1.8.zip again, and then select "Phone" as default in the "Set Default Booting Rom" section.
Or you can keep pressing and un-pressing the HOME BUTTON at boot.
Enjoy flashing and new roms, and good luck to you!!!!!
Here is the tutorial how to flash mods/themes, just a little bit different from flashing the rom.
1. Back up your data (just in case), you may also backup the rom folder in the SDRoms folder you want to flash a mod.
2. Reboot to recovery and flash Chuan_Dualboot_Aroma_vXX.zip
- Select Tools section. Then select the rom slot you want. Skip Page 1, Then in page 2, select "Wipe dalvik-cache" only
-And the most important one, select "Mount Partitions". Don't forget to select "Mount Partitions" otherwise it will overwrite the data and mess up your phone rom.
-Press Next until complete, and don't reboot the phone. (If you see any error, reboot in to recovery and try again)
3. Make sure you don't see any error in the step 2. then you can now flash any mod you like as normal. It will be flashed to the rom slot you just select in the step 2.
- Click "Next" till the end, and reboot the phone.
4. Reboot the phone and boot the rom you want.
FAQ
1. I get an error, what should I do?
- Reboot into recovery, and start over
- If still get the error, Flash "HydraCore v1-7" kernel, and reboot into recovery, and start over
- If still get the error, save the recovery log and post it here.
2. How do I reset the rom on SDCard?
- Flash Chuan_Dualboot_Aroma_v1.8.zip, then select "Tools", select the rom slot you want to reset, skip page 1, then select "Wipe data", and "Wipe cache" in page 2. Then next until finish.
Credits and special thanks to:
- Hardcore for his SpeedMod N7000 ICS.
- superatmos for his TUTORIAL Building Kernel from source
- criskelo for some aroma scripts
- g.lewarne for HydraCore Universal kernel
- funky81 for first CM9 & TW kernel
- ashwin123 for Video Tutorial
- Samsung and developers for some wonderful roms.
WARNING: I've tested and used my scripts and modified kernels on my phone without any problem. There is always a risk when flashing a kernel or a new rom, so flash as your own risk. I have no responsible for any damage to your phone
Pre-install Roms
To make it easier, I have some pre-install roms on SD Card for you guys. Just extract it then it's ready to go.
1. flash pre-install rom
2. flash dualboot kernel
3. reboot
Now you should be able to boot your current rom (samsung ics only) and the pre-install rom on your sd card. Keep press/unpress the home button at boot until you see the boot animation to switch the rom. Check the log and the config file in the SDRoms for more details.
Pre-installed Cassies_XLR_ICS_V4_LQ3 rom - thanks to thering1975
https://docs.google.com/open?id=0BwDBny0G97K5SXZ0dzc3RHNSb2c
Pre-installed [ROM][TABLET/HYBRID]STAXXTANIUM-PARANOIDANDROID. V1.7 - Original Thread - thanks to Staxxthedan
How to Install
- Backup or rename /sdcard/SDRoms/rom1 folder if you have any previous rom on your SD Card.
- Flash sd_internal_preinstall-rom-PARANOIDANDROIDv1.7.zip or extract the SDRoms folder to root folder on your internal SD Card
download link https://docs.google.com/open?id=0BwDBny0G97K5Uy04S0I4eGtrV1k
- Flash cm9_stock_kernel_dualboot.zip to boot the CM9 rom on your sd card
download link http://www.mediafire.com/?gkgvl950d38ka9c
- Reboot, and wait for the phone to boot in to PARANOIDANDROID rom
Pre-installed Preinstalled-Liquid_Black_V 3.2 - Original Thread - thanks to firasusman
How to Install
- Backup or rename /sdcard/SDRoms/rom1 folder if you have any previous rom on your SD Card.
- Flash Preinstalled-Liquid_Black_V 3.2_rom1.zip or extract the SDRoms folder to root folder on your internal SD Card
download link https://docs.google.com/open?id=0BwDBny0G97K5Z1FuMnh0M2otVG8
- Flash any Samsung ICS dual boot support above (not CM9 kernel) to boot the rom on your sd card.
- Reboot, and wait for the phone to boot in to boot rom on SD Card.
Pre-installed [ROM][JB 4.1.1] PARANOIDANDROID v1.2 [TABLET/HYBRID][CM10] - Original Thread - thanks to imilka
How to Install
- Backup or rename /sdcard/SDRoms/rom1 folder if you have any previous rom on your SD Card.
- Flash PARANOIDANDROID v1.2 [TABLET/HYBRID][CM10]_rom1.zip or extract the SDRoms folder to root folder on your internal SD Card
download link https://docs.google.com/open?id=0BwDBny0G97K5TmR3RWZxbG4wQ2s
- Flash cm10_kernel_dual_new.zip to boot the rom on your sd card
download link http://www.mediafire.com/?da4cuozus6tdlv3
- Reboot, and wait for the phone to boot in to PARANOIDANDROID v1.2 rom
- Note: Flash any kernel that works with your phone rom to boot back your phone rom.
Pre-installed CM9 Stable Aroma can select 1 of the 5 rom slot via Aroma. Hope someone can help post more pre-installed roms by replacing the system.img.
You can dual boot this rom with any TW rom using the Goku v1.5-11 kernel.
https://docs.google.com/open?id=0BwDBny0G97K5Tjl5dWVqZnNzc2M
Pre-installed Roms by REVERSiN Sep-3-2012
CM10 - Preview5 UNOFFICIAL : https://docs.google.com/open?id=0B-FfdI4hUTJReFVocmdYMFJwcVE
PARANOiD - JB - v1.911 BugFIX : https://docs.google.com/open?id=0B-FfdI4hUTJRMjgzSEhrelJjbm8
Pre-installed Roms by yats86
ParanoidAndroid 1.3 [JB][TABLET/HYBRID]
Link to download rom: http://www.4shared.com/zip/BxEHxBRC/...l-rom-PAR.html
Mirror: http://www.MegaShare.com/4496353
TMT Midteam 2.2 ICS 4.0.4
Link to download rom http://www.4shared.com/zip/_8VkyH18/...l-rom-TMT.html
Mirror: http://www.MegaShare.com/4496423
CriskeloRomNOTE.vICS-V11.2
Link to download rom http://www.4shared.com/zip/6DPerI8k/...l-rom-Cri.html
Mirror: http://www.MegaShare.com/4496472
More roms will be added later.....
How to make a pre-installed rom
- After setup a rom and copy the system partition to SD Card. You can simply replace the system.img file in any of my pre-installed rom with your system.ing then upload the zip and share with your community. Thank you to anyone who can help with this.
---------------------------------------------------------------------------------------------
Intramfs Source
http://www.mediafire.com/?sk31d47jeh7q2sy - initramfs source for my dualboot1.0 feature.
http://www.mediafire.com/?oob18xxqit8cqmy - initramfs source for my dualboot3.1 feature.
Old Version
Code:
Version 1.7 [url]http://www.mediafire.com/?5w03c1q49wppbgb[/url]
-Added HydraCore v1 - big thanks to g.lewarne who makes this universal kernel working for all roms TW, MIUI, CM9, CM10. Now you can use this kernel to dual boot any rom you want.
-Added latest CM10 kernel.
[SIZE="3"][B][COLOR="blue"]How to modify rom and directly flash it using the Mount Partitions Tool[/COLOR][/B][/SIZE].
[COLOR="DarkOrange"]Most of MIUI,CM9,CM10 roms have the format command which is not safe for directly flashing a rom on SD Card. Follow this instruction to remove the format command.[/COLOR]
1. Extract the rom
2. Then edit the file META-INIF\com\google\android\updater-script using Notepad++
3. Take out the format command [B]format("ext4", "EMMC", "/dev/block/mmcblk0p9", "0");[/B] if there is any
You may also take out all the mount, unmount, kernel flashing, and modem flashing or any command that is related to mmcblk.
4. Compress/Zip the rom back. Now you have the modified rom.
5. Now it ready to flash using the mount tools. Boot recovery, run my dualboot aroma, select tools.., select a rom to flash, in page 1 select wipe system, data, and cache, then in Page 2 select mount partitions for rom on SDCard. Don't reboot after run the script. If don't see any error or fail. Then go ahead flash the modified rom. It should directly flash it into the rom you just pick. Now flash a dualboot kernel you like and enjoy your new roms.
Note: Do the same for any mod, except you don't need to modify the mod, just run the mount tool and flash the mod.
[SIZE="3"][B][COLOR="blue"]How to Setup[/COLOR][/B][/SIZE]
1. Flash a rom you want, make sure follow the instructions of the rom you want to flash. Otherwise you will get a brick.
2. Run (flash) Chuan_Dualboot_Aroma_vXX.zip, then select Tools, then select rom slot (1 out of 5 slots) you want, then select "Copy system to SDCard" and "Wipe data & cache". This tool will copy your current rom to SD Card and setup the data.img and cache.img for the rom on SDCard. I takes about 5 to 10 minutes to process. [COLOR="red"](don't reboot after completion)[/COLOR]
3. Repeat the step 1 & 2 if for the second, third, fourth, or fifth rom except you need to pick a new rom slot. [COLOR="red"](don't reboot after completion)[/COLOR]
4. Run (flash) Chuan_Dualboot_Aroma_vXX.zip again. Select Default Booting Rom, then select the rom slot you want to boot, then select "SDCard" as default. Then Click Yes to flash a dualboot kernel, pick a kernel you want (make sure it's compatible with the rom you want to boot). [B]Now Reboot[/B], and the phone should boot into a rom on SDCard.
[SIZE="5"][COLOR="Blue"][URL="http://www.youtube.com/watch?v=B6JU08mONHY"][COLOR="Blue"]Video Tutorial[/COLOR][/URL][/COLOR][/SIZE] - thanks to ashwin123
[media=youtube]B6JU08mONHY[/media]
[url]http://www.youtube.com/watch?v=B6JU08mONHY[/url]
Version 1.6 - [url]http://www.mediafire.com/?d7bs7srsecwgm16[/url]
- Added Notecore 14.1 kernel
- Added Goku v1.5-11 kernel - thanks to funky81 for the kernel source. This is a very good kernel that supports both CM9 & TW. Now you can dual boot CM9 and TW with this kernel. Keep press/unpress the Home button at boot to switch the rom.
- Added Wipe Tools for the rom on SD Card
- Added Mount partition Tool for the rom on SD Card. This allows you to directly flash a rom or mod on the rom on SD Card. Now you can easily flash a new rom on SD Card, [COLOR="Red"]but be careful if you want to use this tool to flash CM9/CM10 roms. There's a format command there, you need to take out before flashing those roms.[/COLOR]
- Some fixes for the Tools sections.
Version 1.5 [url]http://www.mediafire.com/?1493p91bg7z56nk[/url]
-Fixed the CM10 kernel flashing issue.
-Added NoteCore v13-4
Version 1.3 [url]http://www.mediafire.com/?3c06hnon548hhh2[/url]
-Added NoteCore v13
Version 1.2 [url]http://www.mediafire.com/?9z0uzof8b532bzb[/url]
-Fixed flashing error in version 1.1
Version 1.1
- Added Kernel backup/restore options
- Added share data options too.
Version 1.0 [url]http://www.mediafire.com/?b2i954vve1gh1c4[/url]
-Initial Aroma version
-----------Old Method---------------------------------------------------------------------------------------------------------------
1. Backup your current rom and your data just in case something goes wrong and you can recover your data. You can skip this step if you don't need to save anything.
2. Flash any rom you want like you've been doing. This rom will be a rom on your internal SD Card. Just follow the guild from Dev's of the rom you want to flash. Be careful about EMMC brick, please don't wipe using an unsafe kernel. (Skip this step if you want your current rom to be the rom on your SD Card)
Some roms don't auto get root, so just to be sure you can flash this [URL="http://www.mediafire.com/?8adhwsporsdd61w"]CWM-SuperSU-v0.95.zip[/URL]
3. Copy rom partition to internal SD Card. You can do it partially or all by flashing the following scripts.
- [URL="http://www.mediafire.com/download.php?te8soummj0b9iqv"]copy_rom_to_sdcard_system.zip[/URL] - copy system partition to SD Card. ([COLOR="Blue"]recommend flashing this only[/COLOR])
- [URL="http://www.mediafire.com/download.php?4c6de3h1e8hx4po"]copy_rom_to_sdcard_data.zip[/URL] - copy data partition to SD Card. ([COLOR="Red"]not recommended[/COLOR] unless you want to copy your current apps & data to SD card and want to restore back from the rom on SD card later)
- [URL="http://www.mediafire.com/download.php?vb5l6nc8qr4qlno"]copy_rom_to_sdcard_cache.zip[/URL] - copy cache partition to SD Card. [COLOR="Red"](not recommended[/COLOR], another script will take care of this)
- [URL="http://www.mediafire.com/download.php?dvapmhow79pe1v0"]copy_rom_to_sdcard_all.zip[/URL] - copy all rom partitions to SD Card. ([COLOR="Red"]not recommended[/COLOR], take long time to do)
4. Flash [URL="http://www.mediafire.com/download.php?7q8ml0muqhh930m"]sd_internal_rom1_wipe_data_cache.zip[/URL] to setup a blank data.img and cache.img for the rom on SD card. (only flash this if you didn't flash the above copy_rom_to_sdcard_data.zip and copy_rom_to_sdcard_cache.zip, or copy_rom_to_sdcard_all.zip)
5. Setup the config file for your rom on SD card.
- Flash [URL="http://www.mediafire.com/download.php?x1jsiec6c7g78qk"]sd_rom_config_setup_3.2b_default_phoneRom.zip[/URL] to setup the config file for the SD Rom and boot your phone rom as default.
- Or Flash [URL="http://www.mediafire.com/download.php?318jat6mkpjjec5"]sd_rom_config_setup_3.2b_default_sdcardRom.zip[/URL] to setup the config file for the SD Rom and boot your rom on the SD Card as default.
[COLOR="Blue"] Remember: if the phoneRom and the sdcardRom are the same base, or same platform (CM9, or ICS, or GB). You can switch the rom by keep press/unpress the home button at boot. [/COLOR]
6. Flash dual boot support kernel to boot the rom on the sdcard. You can flash one of the flowing compatible kernels.
[COLOR="Red"]Remember: Do not flash the CM9 kernel to boot the Samsung ICS rom and versus [/COLOR]
- GL_NOTECORE_V11_dual.zip [URL="http://www.mediafire.com/?dxdaqig1d060nru"]Standard[/URL] / [URL="http://www.mediafire.com/?jbaado5xacmx7fw"]OC[/URL] - Thanks to g.lewarne
- [URL="http://www.mediafire.com/?wf1mfqb2q7wtfrb"]dualboot3.2b_speedmod-ics-k3-11.zip [/URL] - Speedmod K3-11 with dual boot support for Samsung ICS roms only, set ro.secure=0 for fully adb root - Thanks to Hardcore
- [URL="http://www.mediafire.com/download.php?60lt63qtvfqcs6b"]GL_NOTECORE_V8.1_dual.zip[/URL] - GL NOTECORE v8.1 with dual boot support for Samsung ICS roms only - Thanks to g.lewarne
- [URL="http://www.mediafire.com/?cdoj67xoqgk82j3"]dualboot3.2_speedmod-ics-k3-9.zip[/URL] - SpeedMod 3-9 with dual boot support for Samsung ICS roms only. - Thanks to Hardcore
- [URL="http://forum.xda-developers.com/showthread.php?t=1710937"]GoKu Kernel 1.4[/URL] - I have not tested this myself, but the change log says dual boot support. - Thanks to funky81.
- [URL="http://www.mediafire.com/?da4cuozus6tdlv3"]cm10_kernel_dual_new.zip[/URL] - CM10 kernel from PARANOIDANDROID v1.2 - thanks to imilka. Note: This kernel also works with the Samsung ICS rom except Wifi and Bluetooth issue. Hope someone can fix it.
- [URL="http://www.mediafire.com/?gkgvl950d38ka9c"]cm9_stock_kernel_dualboot.zip[/URL] - stock CM9 kernel with dual boot support for CM9 roms only. - Thanks to CM9 team
7. Reboot and test the rom on your SD Card. Make sure you test both roms on the SD Card and your phone to make sure they are working.
8. Once you are able to boot the rom on the SD Card, You can now restore your old rom, or flash any new rom you want.
Remember: If my dual boot kernel doesn't support your new rom, you need to flash my dual boot support kernel to boot the rom on SD card, and you need to flash a compatible kernel with your phone rom to boot your phone rom back.
Please note that my current kernels with dual boot support work with Samsung ICS or CM9 roms. I have not tested them with any GB rom yet, so be careful when you flash them on a GB rom or a different platform rom.
[SIZE="5"][COLOR="Blue"][URL="http://www.youtube.com/watch?v=c9UnqqaPdvo"][COLOR="Blue"]Video Tutorial[/COLOR][/URL][/COLOR][/SIZE] - thanks to ashwin123
[media=youtube]c9UnqqaPdvo[/media]
[url]http://www.youtube.com/watch?v=c9UnqqaPdvo[/url]
[SIZE="4"][COLOR="Blue"]Aug 09-12[/COLOR][/SIZE]
- First Aroma version support 2 roms on internal SDcard and 3 roms on external SDCard.
- Add GL NoteCore V12
- Add TMT MIUI kernel
Download link: [url]http://www.mediafire.com/?b2i954vve1gh1c4[/url]
July 30-12
- Add new SpeedMod K3-11 with dual boot support and fully adb root.
- Add Video tutorial - thanks to ashwin123
July-28-12
- Add new kernel GL NOTECORE V8.1 with dual boot support [url]http://www.mediafire.com/?60lt63qtvfqcs6b[/url]
- Preinstalled Liquid_Black_V 3.2 - [url]https://docs.google.com/open?id=0BwDBny0G97K5Z1FuMnh0M2otVG8[/url]
July-26-12
- Add new kernel GL NOTECORE V8 with dual boot support [URL="http://www.mediafire.com/?6p5wapyps7q5qe8"]download link[/URL]
- Re-word the instructions. Much simple and faster to set-up.
Version 3.2
- Updated to SpeedMod-K3-9 source
- Optimized booting time - (about 6 seconds faster than original SpeedMod-K3-9)
- Add feature to safely share data partition if the two roms are the same base but different mod/theme.
- Update SD Rom by extracting system and data folder to /sdcard/SDRoms/update/ - experiment (report if it works for you)
Version 3.1:
- Add feature to put the update.zip in the /sdcard/SDRoms/update/ folder for flashing a mod/theme on the SD Rom.
- Create a file "wipe_dalvik-cache" file in the /sdcard/SDRoms/update/ folder to wipe dalvik-cache on the SD Rom. (simple and fast)
or simply flash this [url]http://www.mediafire.com/?690wyv2zt5j7185[/url] ro wipe dalvik-cache on the SD Rom.
Version 3:
- Updated to SpeedMod-K3-7 source
- Add script to wipe data & cache for rom1 on SD Card. You can also save 1.1 GB space with this. This contains empty data and cache partition images and extract them on your SD Card. You can also save a lot of time & space by simply copy the system to sd card, and then flash sd_internal_rom1_wipe_data_cache.zip
Version 2:
- Updated to SpeedMod-K3-6 source
- Add default rom value in bootsdrom.cfg. Now you can set default rom (phone or sdrom) by changing the default value in the config file.
- Add CMW restore scripts to restore sdrom back to phone rom.
- Some minor tweaks.
Version 1:
- Initial release
- Fix the mounting bug (swaping external and internal sd card) - Kernel/CWM
Could you make an app?
It would be easy to make some $.
Not right now, this requires some kernel modification which is not easy to do in an application. The app may help to flash the rom on SD card faster and easier, but can't change the kernel itself.
hi1 said:
It would be easy to make some $.
Click to expand...
Click to collapse
Good luck for this project
Will try it out sometime...
Nice concept.. I always want to have dual boot for Samsung and AOSP/CM based ROM... But now, wait until we see a one-for-all kernel like siyah to be developed for our Notes..
Wow ! Waiting for such a thing !
Will install it and see ....
How can I delete the Rom on SD again, if I don´t want it anymore?
And to be sure the SD means the external SD.
thanks for answer
Edit: sorry to say, but ur links are 404 Error, can´t download anything
Just delete the SDRoms folder on your internal SD card. SD means internal SD. You can move it to external SD by changing the bootsdrom.cfg values.
hara74 said:
How can I delete the Rom on SD again, if I don´t want it anymore?
And to be sure the SD means the external SD.
thanks for answer
Edit: sorry to say, but ur links are 404 Error, can´t download anything
Click to expand...
Click to collapse
Sent from my GT-N7000 using Tapatalk 2
chuandinh said:
Just delete the SDRoms folder on your internal SD card. SD means internal SD. You can move it to external SD by changing the bootsdrom.cfg values.
Click to expand...
Click to collapse
With changing that value, is it possible to get triple boot?
I imagine to have:
- CM/AOKP in the main ROM
- custom ROM based on TW on internal SD
- official ROM on external SD.
Download link
http://www.mediafire.com/download.php?xc03yg1wjjzziys
I would give it a try if the download links would work
and thanks for the quick answer
I think it´s really cool to have two Roms on our Note to play with
Edit: too late, first Link is back again
CM/AOKP is not supported right now.
Here is an example of the values in the bootsdrom.cfg file
rom=/sdmnt/SDRoms/rom1
system=/sdmnt/SDRoms/rom1/system.img
data=/sdmnt/SDRoms/rom1/data.img
cache=/sdmnt/SDRoms/rom1/cache.img
After you are done copy rom to SD card, you can rename the rom1 to rom2 in the SDRoms folder. Then change the values in the config file like this
rom=/sdmnt/SDRoms/rom2
system=/sdmnt/SDRoms/rom2/system.img
data=/sdmnt/SDRoms/rom2/data.img
cache=/sdmnt/SDRoms/rom2/cache.img
If you want to use external SD instead.
Copy the SDRoms folder to your external SD
then change the config file values like this. sdmnt1 means external SD.
rom=/sdmnt1/SDRoms/rom1
system=/sdmnt1/SDRoms/rom1/system.img
data=/sdmnt1/SDRoms/rom1/data.img
cache=/sdmnt1/SDRoms/rom1/cache.img
mbudh said:
With changing that value, is it possible to get triple boot?
I imagine to have:
- CM/AOKP in the main ROM
- custom ROM based on TW on internal SD
- official ROM on external SD.
Click to expand...
Click to collapse
is there a way to change that it boot normally the phone Rom and press home button only if I want to boot the SD Rom?
Wait for my next update
Sent from my GT-N7000 using Tapatalk 2
I tried the setup.zip but the is no bootsdrom.cfg file in SD Rom folder
I tried it twice.
so I cannot boot the SD Rom
any suggestions?
no root! for phone Rom
for first problem I copied over the bootsdrom.cfg in the folder and it works,
booted the SD Rom and it has still root
but now I can´t boot Phone Rom with holding Homebutton
now I can switch between the Roms by rename bootsdrom.cfg to .bak
but it always been optimizing the apps when switch the Roms
I get root back for the Phone Rom :laugh:
I get it nearly all to work :laugh:
only things are that the homebutten at booting doesn´t work, have to rename the bootsdrom.cfg into .bak for booting phone rom
and
the optimizing all apps at switch between the roms
but therefor it´s REALLY cool and I THANK YOU again for your GREAT WORK :good:
I always searched for a thing like this
Really great work
Looking forward ti seeing you porting it to cm9 kernel
Sent from my GT-N7000 using xda premium
a few little things that I noticed:
- after each switch I have to decide which Home Launcher I want to use
- the widgets I place on Nova Launcher are the same on both Roms, so I guess if I use the same Launcher I can´t use different Widgets by default
- the Icon Quickpanel Settings is shown in one Rom but in the other Rom the Icon is shown as not installed, so I have to put it again from app drawer to the homescreen
- and I tried to copy the files from sd_rom_setup into the right folders so that the homebutton work, but it doesn´t work
realy great job mister...
will learn how to implement..
now i can put also switch my fav rom... albafinalstage n cassie 4.5 slim :thumbup:
Hello,
I'm not gonna panic, as I think Ive not bricked my phone YET.
Here is what I have done, I have a GALAXY S I9000.
Have been using it for quite some time now. 2 years ago, I have flashed it with - hardcore's kernel with the ClockworkMod Recovery - using Odin.
Today I decided to give Cyanogenmod a go, followed the steps here. - http://wiki.cyanogenmod.com/wiki/Samsung_Galaxy_S:_Full_Update_Guide
Since I have the hardoce's kernel, I skipped this Installing the ClockworkMod Recovery - and moved on to - Flashing CyanogenMod.
I will go step by step from here.
Download the latest version of CyanogenMod.
Optional: Download the Google Apps for the device.
Place the CyanogenMod update.zip file on the root of the internal memory.
Optional: Place the Google Apps .zip on the root of the internal memory also.
Boot into the ClockworkMod Recovery.
Once the device boots into the ClockworkMod Recovery, use the side volume buttons to move around, and either the power button or the trackball to select.
Select the option to Wipe data/factory reset.
Then select the option to Wipe cache partition.
Select Install zip from sdcard.
done these, no problem so far.
[*]Select Choose zip from sdcard.
when I chose this, phone rebooted, it was so fast something may have come up and I didnt see.
Now I am stuck in a boot loop:
- Galaxy S I9000 samsung screen comes up, goes away for a second, comes up again.
- A page with code appearing from the bottom comes up really fast ( logo in the middle changes quickly) then it disappears.
- whole thing starts again.
UPDATE: I got a picture of the fast screen that comes up. : http://localhostr.com/files/b5NzFRy/2012-08-27 05.07.32.jpg
Some observations.
- I can go into download mode when opening it with the key combo.
- loop only stops when I unplug the battery
I need advice on what caused this and how to fix this, please help me.
edizarca said:
I need advice on what caused this and how to fix this, please help me.
Click to expand...
Click to collapse
Just flash it again ...see quick fix and solutions link below
xsenman said:
Just flash it again ...see quick fix and solutions link below
Click to expand...
Click to collapse
I cannot see what will help me on this page, but I understand how flashing again could work.
But how with the situation I have?
edizarca said:
I cannot see what will help me on this page, but I understand how flashing again could work.
But how with the situation I have?
Click to expand...
Click to collapse
are you not able to get into recovery? If only download than you need to get back to GB and than do a progressive update from GB to ICS to JB
Flash it again. From what I've heard, it only flashes the kernel the first time.
I had the same problem today with CM7 today. Just reboot in recovery and flash again cm zip, form there on everything is gonna run smooth!
edizarca said:
Hello,
I'm not gonna panic, as I think Ive not bricked my phone YET.
Here is what I have done, I have a GALAXY S I9000.
Have been using it for quite some time now. 2 years ago, I have flashed it with - hardcore's kernel with the ClockworkMod Recovery - using Odin.
Today I decided to give Cyanogenmod a go, followed the steps here. - http://wiki.cyanogenmod.com/wiki/Samsung_Galaxy_S:_Full_Update_Guide
Since I have the hardoce's kernel, I skipped this Installing the ClockworkMod Recovery - and moved on to - Flashing CyanogenMod.
I will go step by step from here.
Download the latest version of CyanogenMod.
Optional: Download the Google Apps for the device.
Place the CyanogenMod update.zip file on the root of the internal memory.
Optional: Place the Google Apps .zip on the root of the internal memory also.
Boot into the ClockworkMod Recovery.
Once the device boots into the ClockworkMod Recovery, use the side volume buttons to move around, and either the power button or the trackball to select.
Select the option to Wipe data/factory reset.
Then select the option to Wipe cache partition.
Select Install zip from sdcard.
done these, no problem so far.
[*]Select Choose zip from sdcard.
when I chose this, phone rebooted, it was so fast something may have come up and I didnt see.
Now I am stuck in a boot loop:
- Galaxy S I9000 samsung screen comes up, goes away for a second, comes up again.
- A page with code appearing from the bottom comes up really fast ( logo in the middle changes quickly) then it disappears.
- whole thing starts again.
UPDATE: I got a picture of the fast screen that comes up. : http://localhostr.com/files/b5NzFRy/2012-08-27 05.07.32.jpg
Some observations.
- I can go into download mode when opening it with the key combo.
- loop only stops when I unplug the battery
I need advice on what caused this and how to fix this, please help me.
Click to expand...
Click to collapse
Installation Procedure for CM9
If you have CWM Recovery
Copy both zip files int internal SDCARD
Boot into recovery
Do a full wipe (data/factory,cache, dalvik)
Install zip from sdcard
Choose zip from sdcard
Select the ROM
You will get boot loop
Again boot into recovery
Install the same zip file one more time
Install google app
Do a full wipe again (data/factory,cache,dalvik)
Reboot your phone
Enjoy...
Hi,
I had the same pb coming from a GB
I think this pb is very common
1) DON'T WORRY !
2) Unplug the battery when bootlooping
3) Put the SGS in Recovery Mode (the CWM's version has changed)
4) Select the CM .zip and flash it AGAIN
5) When it's done, reboot system
This time, everything shoot be OK
Just be carefull with your IMEI (always have a backup of EFS folder !)
anukilimanoor said:
Installation Procedure for CM9
If you have CWM Recovery
Copy both zip files int internal SDCARD
Boot into recovery
Do a full wipe (data/factory,cache, dalvik)
Install zip from sdcard
Choose zip from sdcard
Select the ROM
You will get boot loop
Again boot into recovery
Install the same zip file one more time
Install google app
Do a full wipe again (data/factory,cache,dalvik)
Reboot your phone
Enjoy...
Click to expand...
Click to collapse
Thanks!, this method worked a treat :highfive:
Anyone have a trick yet for CM 10.1 v.22 Nightly, I keep getting a bootloop on all their versions except the original one. This is so frustrating because I have to keep going back to stock and then update to ICS.
kvarug01 said:
Anyone have a trick yet for CM 10.1 v.22 Nightly, I keep getting a bootloop on all their versions except the original one. This is so frustrating because I have to keep going back to stock and then update to ICS.
Click to expand...
Click to collapse
Same here, after the Samsung and CM logos, and splash animation, it says :
"Encryption unsuccessful.
Encryption was interrupted and can't complete. As a result, the data on your phone is no longer accessible.
To resume using your phone, you must perform a factory reset...."
After I tap Reset phone, it goes to CWM recovery.
Do the factory reset and the same thing occured in loop.
I came from JVU and CF root.
anukilimanoor said:
Installation Procedure for CM9
If you have CWM Recovery
Copy both zip files int internal SDCARD
Boot into recovery
Do a full wipe (data/factory,cache, dalvik)
Install zip from sdcard
Choose zip from sdcard
Select the ROM
You will get boot loop
Again boot into recovery
Install the same zip file one more time
Install google app
Do a full wipe again (data/factory,cache,dalvik)
Reboot your phone
Enjoy...
Click to expand...
Click to collapse
How long should the first boot take after following these steps? And does it have to be from SDCARD, because I can't get the rom onto my sd card, I can only do it via usb otg cable
---------- Post added at 05:11 AM ---------- Previous post was at 04:34 AM ----------
anukilimanoor said:
Installation Procedure for CM9
If you have CWM Recovery
Copy both zip files int internal SDCARD
Boot into recovery
Do a full wipe (data/factory,cache, dalvik)
Install zip from sdcard
Choose zip from sdcard
Select the ROM
You will get boot loop
Again boot into recovery
Install the same zip file one more time
Install google app
Do a full wipe again (data/factory,cache,dalvik)
Reboot your phone
Enjoy...
Click to expand...
Click to collapse
Does it have to be from the sdcard or can you do it from a flash drive via usb otg. I cannot get the rom onto my sd card
paradiselost28 said:
Hi,
I had the same pb coming from a GB
I think this pb is very common
1) DON'T WORRY !
2) Unplug the battery when bootlooping
3) Put the SGS in Recovery Mode (the CWM's version has changed)
4) Select the CM .zip and flash it AGAIN
5) When it's done, reboot system
This time, everything shoot be OK
Just be carefull with your IMEI (always have a backup of EFS folder !)
Click to expand...
Click to collapse
The same thing happend to me.
Just plug out the battery and flash again on cwm recovery.
Sent from my GT-I9000 using XDA Premium 4 mobile app
Hi,
I am sorry if this question is asked earlier. i tried searching but didnot find any thread related to my problem
I am planning to install Rocket Rom v1 - JB with below mentioned process as described in actual thread.
i have a confusion, process says "copy ROM on your USB-storage". i want to ask, is it actually USB storage or does it mean ext SD card.??
Installation:
make sure you are on a rooted ICS-ROM or JB-ROM with CWM recovery and brickfree kernel installed
copy ROM on your USB-storage
boot in Recovery
FullWipe (also when coming from other Sammy-JB-ROM!)
flash ROM (it will reboot automatically in most cases)
after initial setup, open Super SU-app and you have to update SU-bin (app will do that for you if necessary!)
enjoy
Click to expand...
Click to collapse
Thanks
RR V1_JB
I will tell you how to flash Rocket Rom v1 JB
1. Download rom.zip
2. copy rom.zip to internal memroy or SD card
3. Flash any safe Kernels like Philz, Hydracore, Abysis Kernel
4. Reboot in recovery
5. Do Data wipe, wipe cache partition and dalvik cache
6. choose Install ZIP from SD card
7. select internel or external sd card in which you have copied rom.zip
8. choose the rom.zip file and flash it
9. it will automatically reboot after flashing
10. wait for sometime to get the mobile to boot to new rom
11. once you have got home screen, then reboot again
12. then after coming homescreen check menu button is working or not
13. if not working then reboot recovery
14. do Do Data wipe, wipe cache partition and dalvik cache again
15. flash rom again
16. now your home button issue will get resolved
17. Enjoy new rom
If you have Music Player Force close Then do the following
1. install root explorer
2. download music Player.apk (http://www1.zippyshare.com/v/85093893/file.html)
3. download musicfx.apk (https://www.dropbox.com/s/xt3jkrfa7w6ni43/MusicFX.apk)
4. copy music player.apk and musicfx.apk to root/system/apps and set permission to rw and then reboot
5. Now music Player will be working fine
Hi, few days ago I tried to flash CM11 and was disappointed with the no signal / no IMEI / no SIM problem...
I found a solution that worked perfectly for me :
1) Download and install latest recommended CWM recovery 6.0.4.5, easy to find on XDA
2) Download the latest 4.1 (not 4.3 or you will be stuck with KNOX security) firmware (on Sammobile for example).
3) Download latest CM11 nightly (and/or Paranoid GAPPS if you want them...) and copy the archive files on your SD Card then remove the SD Card from your phone.
4) Download latest modem for GT-I9305 (XXUEMK1).
5) Reboot in Download mode and flash CMW Recovery using Odin, Heimdall (tutorials on XDA...).
6) Reboot into CWM Recovery.
7) Wipe EVERY partition including those in "mounts and storage" section.
8) Reboot in Download mode.
9) Extract the downloaded Samsung package and flash the .tar.md5 file using Odin, Heimdall.
10) Reboot again in Download mode.
11) Flash the latest downloaded modem with Odin or Heimdall.
12) Power off your phone and then put back your SD Card with archive files on it.
13) Boot into CWM Recovery and do a Wipe Data/Factory reset and wipe /system partition in "mounts and storage" section then flash your archive files.
14) Reboot normally.
15) Enjoy.
All of these steps may not be necessary, you may just have to flash the latest ClockworkMod Recovery, wipe everything and try again to flash your CM11 ROM. But this is to be sure that the problem does not comes from somewhere else by restoring the phone at its factory state.
I know this is very long, but I think you could have broken some partitions with previous flashes, this guide helps you to repair bad things and you should flash all 4.4.x stuff using the latest ClockworkMod Recovery version.
I hope this will work for you guys, send feedbacks !