Related
Hey XDA,
I tried to root my phone (GingerBread 2.3.3 with DDJV5) with CF root with ODIN3.After installation Odin says process was successful and finally my phone wont boot and is not passing after SGS logo. Can u suggest me best method to get back my phone in normal or else installation procedure for Cyanogenmod..
Can you still boot into recovery or download mode?
pzayx said:
Can you still boot into recovery or download mode?
Click to expand...
Click to collapse
yeah i can able see download mode by pressing all 3 buttons.But is phone is sucking at i9000 logo and is not booting from it.let me know how can i get back my phone into normal state or else is there anyway to flash my mobile into custom firmware like cyanogenmod.
Thanks in advance.
Ram
Simply flash again with ODIN a stock Firmware, Root it and flash the ROM you want ??
Yes, flash stock with odin, or simply go into recovery wipe cache, go into mounts and wipe system, datadata, & data and try to reflash. If it does not work you should flash stock with odin and tripple check that you got the right files for your phone
Sent from my GT-I9000 using XDA App
Did the same but unble update to cyanogenmod.phone keep on rebooting.let me know one thing update.zip should be placed in internal or external memory?
Sent from my GT-I9000 using XDA App
Help, my Note is stuck on the boot logo after trying to install a custom rom.
I have tried several roms now and non of them pass the boot screen. Getting a little scared now.
Here are the steps I have taken. Please tell me if I'm doing something wrong.
Stock rom
Root and install clockwork mod
nandroid backup
flash abyss kernal
wipe data
wipe cache
install custom rom
stuck on boot logo
I have just tried restoring the nandroid backup and the same thing happens... stuck on boot logo
Have I bricked the phone?
I can still access clockwork if that's any help.
I'm trying a restore via pc odin now.
Not got much hope though, seems to be stuck. The bar doesn't move anymore :'(
Hope an expert will assist.
What stock rom are you on, is it ics? If so nandroid backups and restores are dangerous on stock kernel.
Try flashing stock gb with pc Odin and go from there. If it fails, post at what point ie factory.fs.
Sent from my GT-N7000 using xda premium
K1LLER HORNET said:
....Stock rom
Root and install clockwork mod
nandroid backup
flash abyss kernal
wipe data
wipe cache
install custom rom
stuck on boot logo
......
Click to expand...
Click to collapse
Did you use CWM.zip to root your phone and flash Abyss?
Did you do wipe while still on Temp CWM?
If the answer is yes to both, you are Superbricked
Sent from my GT-N7000 using xda app-developers app
K1LLER HORNET said:
Help, my Note is stuck on the boot logo after trying to install a custom rom.
I have tried several roms now and non of them pass the boot screen. Getting a little scared now.
Here are the steps I have taken. Please tell me if I'm doing something wrong.
Stock rom
Root and install clockwork mod
nandroid backup
flash abyss kernal
wipe data
wipe cache
install custom rom
stuck on boot logo
I have just tried restoring the nandroid backup and the same thing happens... stuck on boot logo
Have I bricked the phone?
I can still access clockwork if that's any help.
Click to expand...
Click to collapse
After flashing abyss kernel have you rebooted to recovery to do all 3 wipes. ?
SpyderTracks said:
What stock rom are you on, is it ics? If so nandroid backups and restores are dangerous on stock kernel.
Try flashing stock gb with pc Odin and go from there. If it fails, post at what point ie factory.fs.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Yes it was stock ICS
I think I tried flashing stock GB. Odin just stops at a certain point; yes it's at factory.fs...
shoey63 said:
Did you use CWM.zip to root your phone and flash Abyss?
Did you do wipe while still on Temp CWM?
If the answer is yes to both, you are Superbricked
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
I might have flashed Abyss while on temp. Can't really remember.
What do I do now?
Anything else I can try?
Get Amazon to replace it?
Edit: I can't seem to get into clockwork recovery anymore. It just says "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again"
But I can get into the 'downloading' mode.
Help.
Wipes using Temp CWM.zip will result in brick
''Odin just stops at a certain point; yes it's at factory.fs''
that means you have bricked your phone.
So what can I do now?
Return to Samsung/Amazon?
Will they know that it was my fault?
Warranty
Go to recovery mode and check whether its showing binary counter 1 or above, ''Staus'' Official or Custom
If binary count is 0 and status is official you will get warranty
tell service center people that while updating new update via ota , your phone bricked
deleted
Flash GB
just pull out the battery. wait for 10 secs.. reinsert. go back to download mode..
use odin 1.85 and just select the tar.md5 fine in pda section..
Flash Gingerbread rom.
anoopva said:
Go to recovery mode and check whether its showing binary counter 1 or above, ''Staus'' Official or Custom
If binary count is 0 and status is official you will get warranty
tell service center people that while updating new update via ota , your phone bricked
Click to expand...
Click to collapse
It says:
Custom Binary Download: No
Current Binary: Samsung Official.
So I take it that's good right?
nokiamodeln91 said:
May be try installing one of the gb roms
Click to expand...
Click to collapse
anoopva said:
just pull out the battery. wait for 10 secs.. reinsert. go back to download mode..
use odin 1.85 and just select the tar.md5 fine in pda section..
Flash Gingerbread rom.
Click to expand...
Click to collapse
I will try that in the next 20 mins once the stock rom downloads.
To stop this happening again, could someone please, please, please post some noob friendly instructions on how I should flash a custom rom from stock.
I know someone might say 'just google it' or 'there are plenty of guides out there', but I was sure I had the steps nailed down otherwise I wouldn't have tried it.
It would be very helpful.
Especially to see exactly where I went wrong.
Anyway, thanks for all the info.
[STOCK ROMS] N7000 All stock ROMs + install + Root guide All at 1place,Latest 4.0.4
[STOCK ROMS] N7000 All stock ROMs + install + Root guide All at 1place,Latest 4.0.4
http://forum.xda-developers.com/showthread.php?t=1424997
anoopva said:
[STOCK ROMS] N7000 All stock ROMs + install + Root guide All at 1place,Latest 4.0.4
http://forum.xda-developers.com/showthread.php?t=1424997
Click to expand...
Click to collapse
Yeah, I'm getting the stock GB (UK) rom from there.
Taking a while as a free user.
Thanks.
My Way of root + cwm (i have checked this in ICS only )
1. flashing safe kernels like hydracore 5.4 or Philz kernel 2.7 using PC odin
2. reboot
3. now you have root + CMW
4. open super su / superuse app
5. check for root access using Root Checker
6. Flash Supersu.zip in CMW if experience any root issues
7. now will be having stock ics with safe kernel and cwm.
anoopva said:
1. flashing safe kernels like hydracore 5.4 or Philz kernel 2.7 using PC odin
2. reboot
3. now you have root + CMW
4. open super su / superuse app
5. check for root access using Root Checker
6. Flash Supersu.zip in CMW if experience any root issues
7. now will be having stock ics with safe kernel and cwm.
Click to expand...
Click to collapse
Then what do I do?
Sorry, want to be as clear as possible.
Flashing Any Custom Roms
1. Flash Any Safe Kernel and reboot to recovery
2. do all 3 wipes (wipe data/factory, wipe cache partition, wipe dalvik cache)
3. Flash custom rom.zip
4. reboot
5. enjoy new custom rom
@ anoopva
Thank you for all your valuable info.
I may put it to use if I have the courage to risk a replacement phone.
Will update thread shortly on how flashing to GB goes.
I won't hold my breath.
You won't be able to flash a ROM anymore. Odin will get stuck. DO NOT attempt to flash a custom kernel through PC Odin. It will RAISE your flash counter and then it will be obvious that you have messed with your phone, so warranty will be voided! There is another way to get recovery, just wait.....
shoey63 said:
You won't be able to flash a ROM anymore. Odin will get stuck. DO NOT attempt to flash a custom kernel through PC Odin. It will RAISE your flash counter and then it will be obvious that you have messed with your phone, so warranty will be voided! There is another way to get recovery, just wait.....
Click to expand...
Click to collapse
Yes, just found that it got stuck.
Got further than with the stock ICS rom.
So do I have any options other than to return the phone?
Hi All,
I've tried to find the answer but cannot see one specific to what I am experiencing.
I followed the guide from wiki.cyanogenmod.org/w/Install_CM_for_galaxysmtd
Semaphore's ClockworkMod Recovery was not working so I used the file from Replicant's recovery.img as per instructions at bottom of the page.
I followed the instructions. I rooted the phone, but I'm stuck. I can get into the recovery mode but I cannot mount the phone back to the PC so I can put the CM zip file onto the sdcard.
As soon as I turn on the phone, it goes into the CM Recovery menu.
Anyone know how to get the phone to mount to the PC and how I can get a CM image to the phone to install?
Thanks, please help. Need to get this phone working as I want to give it to my daughter to use in Italy.
malvic88 said:
Hi All,
I've tried to find the answer but cannot see one specific to what I am experiencing.
I followed the guide from wiki.cyanogenmod.org/w/Install_CM_for_galaxysmtd
Semaphore's ClockworkMod Recovery was not working so I used the file from Replicant's recovery.img as per instructions at bottom of the page.
I followed the instructions. I rooted the phone, but I'm stuck. I can get into the recovery mode but I cannot mount the phone back to the PC so I can put the CM zip file onto the sdcard.
As soon as I turn on the phone, it goes into the CM Recovery menu.
Anyone know how to get the phone to mount to the PC and how I can get a CM image to the phone to install?
Thanks, please help. Need to get this phone working as I want to give it to my daughter to use in Italy.
Click to expand...
Click to collapse
Put ur phone in download mode return to stock 2.3.6 then root it again and flash a different ROM or flash a differant kernel using Odin should fix ur problems
Sent from my GT-I9000 using xda premium
kevtrysmoddin said:
Put ur phone in download mode return to stock 2.3.6 then root it again and flash a different ROM or flash a differant kernel using Odin should fix ur problems
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
Thanks, but I figured it out late last night. In recovery mode, there is an option to turn on USB mode. With USB on, the PC will see the phone. I downloaded the CM image (zip) to install. Put this into the root folder. Also downloaded the correct Google App as described in the link and put this into the root of the phone.
Turn off the USB. Leave phone plugged into the pc. With recovery mode, select install zip and select the CM zip file you put onto the root. This will install the CM. It will do this twice to convert the phone file system.
Phone will boot up and your in with CM. Now turn off and boot phone into recovery mode again using 3 button method. Select the Google apps zip file to install. This will install the Google Play and other software. Reboot and setup the phone!
Got the Galaxy S i9000 working again!
Hi there,
I have a rooted Galaxy Note N7000 running JellyBean 4.1.2. and I've got a ton of apps/photos/videos/messages... etc.
and I've sensed the phone is getting slow. I've removed all the unnecessary apps and deleted photos/videos etc..
but its still slow.
so anyway I decided to start from scratch, I decided to unroot the phone and install a stock rom. delete all photos/videos/apps.. everything.
so I downloaded the official latest stock rom released from samsung for my region. (N7000JPLSB_N7000OJPLSB_XSG)
and I've looked at many many pages on the internet and some site different methods than other, which got confusing.
finally i decided i'd go with the method mentioned in this page:
rootgalaxynote(dot)com/galaxy-note-unroot/how-to-unroot-galaxy-note-gt-n7000/
(sorry for the link formatting it wouldn't let me post a url)
the problem is, at the end of the page it says to do a “Wipe data/factory reset”. However, I have read on many sites and threads that you should never do a factory reset on stock Rom!
So now i'm confused.
1- is the method mentioned in the page i linked above correct and safe?
2- will the method above delete everything? ie: photos/videos/apps.. etc (which is what i want) if not, how do i achieve that?
3- do i do a Wipe data/factory reset? or not?
Thanks in advance.
What's your current config?
nokiamodeln91 said:
What's your current config?
Click to expand...
Click to collapse
sorry i don't understand. i'm really new to this. What do you mean by current config?
What rom are you running and what kernel. Rooted.
1.Download a stock rom for n700
2.Install odin on your pc
3.Go to download mode by pressing the vol + , power button + center button
4.press vol +
You are in odin flash mode for ur mobile.
Open odin on ur pc
Check if ur phone is detected. If the upper box is yellow and it shows a COM usb port.
Browse the stock rom file a .tar.md5 file in the PDA section let everything as it is.
Press flash and wait and note things happen.
The yellow box will turn green with PASS written on it.
Reboot ur phone.
A simple how to
Sent from my GT-N7000 using xda app-developers app
Right. Here my info:
Baseband Vesion: N7000XXLSO
Kernel Version: 3.0.31-906407 / [email protected] #3 / SMP PREEMPT Tue Feb 19 22:05:07 KST 2013
Build Number: JZO54K.N7000JPLSB
Flash Philz kernel and boot into cwm recovery. The go to mounts and storage and format system, data, cache and preload. This will completely erase the trace of old system. Then go back to advanced menu and choose reboot download. Then flash the rom as per reply by above member.
Before doing this just make sure you have a working usb connection because after the steps there won't the any rom on phone to boot till you flash the new now.
nokiamodeln91 said:
Flash Philz kernel and boot into cwm recovery. The go to mounts and storage and format system, data, cache and preload. This will completely erase the trace of old system. Then go back to advanced menu and choose reboot download. Then flash the rom as per reply by above member.
Before doing this just make sure you have a working usb connection because after the steps there won't the any rom on phone to boot till you flash the new now.
Click to expand...
Click to collapse
HI, thanks for your reply, i found Philz Kernel, but what is cwm recovery? and how do i boot into it?
To boot in CWM, you shut down your Note. And then you press Vol-, Home and Power for recovery Mode.
bakkouz said:
HI, thanks for your reply, i found Philz Kernel, but what is cwm recovery? and how do i boot into it?
Click to expand...
Click to collapse
Recovery mode is a mode in which you have control on Android file systems, internal and external SD cards. It run without Android.
Thanks, about the Kernel though.. as I said I found the page regarding Philz kernel, but there are so many of them i really don't know which one to download. there are so many threads intertwined it get really confusing.
is it the one in here:
http://forum.xda-developers.com/showpost.php?p=31911682&postcount=3
should i download the JPLSB one? will this root my phone (again?) cause i don't want it rooted.
should i even download the kernel? i mean do i really need to? is it because my current kernel will cause problems?
bakkouz said:
HI, thanks for your reply, i found Philz Kernel, but what is cwm recovery? and how do i boot into it?
Click to expand...
Click to collapse
1 - Flash Philz kernel
2 - Go to Recovery Mode
3 - Go on "Mount & Storage"
3 - Format ALL ! (Data, Cache, System, Emmc etc ...) Save whant you want to save before.
4 - Go in Advanced, Format Dalv. cache.
5 - Shut down your phone (remove your battery)
6 - Turn on your note in Odin Mode (Vol+, Home & Power)
7 - Flash your last Touchwizz stock rom with Odin.
I'm French, I've do this manip, I'm on XXLT4 full stock. Fast & Economic. (2,5 days)
KalamiGeek said:
1 - Flash Philz kernel
Click to expand...
Click to collapse
Ok. great. but:
1- i have no idea how to flash a kernel.
2- which kernel to chose?
- PhilZ-cwm6-JPLSB-UAE-5.00.5.tar.md5
or
- PhilZ-cwm6-JPLSB-UAE-5.00.5-signed.zip
cause in the thread it says the zip will root the phone, and i don't want to root the phone, can i flash using the tar.md5 one?
bakkouz said:
Ok. great. but:
1- i have no idea how to flash a kernel.
2- which kernel to chose?
- PhilZ-cwm6-JPLSB-UAE-5.00.5.tar.md5
or
- PhilZ-cwm6-JPLSB-UAE-5.00.5-signed.zip
cause in the thread it says the zip will root the phone, and i don't want to root the phone, can i flash using the tar.md5 one?
Click to expand...
Click to collapse
Check .tar.md5
Find Odin v3.04. Put philz kernel .tar.md5 on Pda case. And flash it
bakkouz said:
Ok. great. but:
1- i have no idea how to flash a kernel.
2- which kernel to chose?
- PhilZ-cwm6-JPLSB-UAE-5.00.5.tar.md5
or
- PhilZ-cwm6-JPLSB-UAE-5.00.5-signed.zip
cause in the thread it says the zip will root the phone, and i don't want to root the phone, can i flash using the tar.md5 one?
Click to expand...
Click to collapse
Yes, use tar.md5 file with Odin PC as previously shown.
That file is Philz kernel and add ROOT by default. To avoid root add, use philz_installer.cfg as indicated in the Philz thread.
Ok great, thank you for all the help.
i just hope i don't brick the phone
HI just one last fast question please...
as for philz_installer.cfg it says to put it in /sdcard/clockworkmod/philz_installer.cfg
but i don't have a clockworkmod folder.
should i create it? or put on directly on /sdcard main folder?
Don't use the tar file. It will cause a yellow triangle. Use the zip version. Place it on external sd card. Don't worry about cfg file for now. Boot into recovery and choose apply update from external storage. Choose the zip and flash. After it completes, click on reboot system. The again boot into recovery and you should see cwm
nokiamodeln91 said:
Don't use the tar file. It will cause a yellow triangle. Use the zip version. Place it on external sd card. Don't worry about cfg file for now. Boot into recovery and choose apply update from external storage. Choose the zip and flash. After it completes, click on reboot system. The again boot into recovery and you should see cwm
Click to expand...
Click to collapse
I've often used Odin PC to flash new ROM's, for example Stock LT4 and Stock LT5, no problem, no yellow triangle. To avoid it in the future, please explain when and why we get the trouble triangle yellow. Thanks.:good:
you will get a yellow triangle if you flash anything else that stock roms using PC odin. you will also get an increased counter. nothing to worry if you are out of warranty though
Hey Guys. Greetings. I wanted to update my galaxy note [GT-N7000, India] to Android OMNIRom 4.4.2 Kitkat nightly build from Android 4.1.2 [Kernel version DDLSC]. Following steps led to bricking my phone:-
1. I first installed philz custom kernel [Version DDLSC CWM version 6.0.3.7] so that I could have CWM and SU.
2. Then I went to CWM Recovery mode, did factory reset. Then Wipe Cache. Then Wipe Dalvik Cache. Then I tried applying the omnirom update. It failed and gave me some context error and status 7.
3. Then I restored my 4.1.2 image using the CWM recovery only.
4. I booted into 4.1.2 and tried updating the CWM to 6.0.4.3 using ROM Manager. It succeded.
5. I went back again to recovery mode but it said again 6.0.3.7.
6. I tried applying update to CWM from CWM itself. It stuck at something like “replacing the stock recovery….”.
7. I powered off my phone. It went into boot loop once but somehow it started.
8. Then again I went into ROM manager and selected Boot into recovery mode.
9. It bricked my phone. Unable to boot since then. I cannot access recovery mode but I can access download/ODIN mode.
Here’s what I tried to do.
1. Downloaded CWM 6.0.4.3 touch .zip from clockworkmode.com
2. Renamed it to recovery.img.
3. Converted it to tar.md5 using img to tar tool.
4. Using Odin version 3.07, I tried flashing CWM.6.0.4.3.tar.md5 It stucks at NAND Write start.
Please help me recover my phone.
Specs: Samsung Galaxy NOTE GT-N7000
Original firmware: 4.1.2 kernelDLSC
16 GB internal usb storage
Country India.
chirags1986 said:
Bricked Galaxy Note GT-N7000 using CWM
Click to expand...
Click to collapse
Few things you should have already read and understood.
1. Note N7000 doesn't have a separate active recovery partitions as the S3 and so on.. The recovery is built in to the kernel. So flashing Philz was a correct step.
2. You cannot update the recovery using ROM manager as it writes to the recovery partition which this phone doesn't use. Thus you didn't get the updated recovery.
3. Using odin will not work due to 1&2
Download the Philz kernel DDLC tar version and flash using Odin (uncheck Auto reboot). Once it shows Pass, then power off the phone and remove the usb cable. Boot into recovery using the vol up+home+power. The flash a kernel like Raw r4/r5. reboot into recovery and wipe. Flash Omni, Gapps, SU. Reboot.
Revive your phone by flashing stock firmware using.
So its not really "Bricked Galaxy Note GT-N7000 using CWM" but bricked due to sheer ignorance.
my device bricked
nokiamodeln91 said:
Few things you should have already read and understood.
1. Note N7000 doesn't have a separate active recovery partitions as the S3 and so on.. The recovery is built in to the kernel. So flashing Philz was a correct step.
2. You cannot update the recovery using ROM manager as it writes to the recovery partition which this phone doesn't use. Thus you didn't get the updated recovery.
3. Using odin will not work due to 1&2
Download the Philz kernel DDLC tar version and flash using Odin (uncheck Auto reboot). Once it shows Pass, then power off the phone and remove the usb cable. Boot into recovery using the vol up+home+power. The flash a kernel like Raw r4/r5. reboot into recovery and wipe. Flash Omni, Gapps, SU. Reboot.
Revive your phone by flashing stock firmware using.
So its not really "Bricked Galaxy Note GT-N7000 using CWM" but bricked due to sheer ignorance.
Click to expand...
Click to collapse
i flash philz kernel
then i wanted to flash cm11 so
i wiped data
wiped cache
wiped system
wiped dalvik
then i selected cm11 and it showed error status7
so i restored my backup rom
now i restarted my device and it says system ui has stopped..
amiransari2 said:
i flash philz kernel
then i wanted to flash cm11 so
i wiped data
wiped cache
wiped system
wiped dalvik
then i selected cm11 and it showed error status7
so i restored my backup rom
now i restarted my device and it says system ui has stopped..
Click to expand...
Click to collapse
nokiamodeln91 said:
Download the Philz kernel DDLC tar version and flash using Odin (uncheck Auto reboot). Once it shows Pass, then power off the phone and remove the usb cable. Boot into recovery using the vol up+home+power. The flash a kernel like Raw r4/r5. reboot into recovery and wipe. Flash Omni, Gapps, SU. Reboot.
Click to expand...
Click to collapse
Again you did not read properly.
bricked galaxy note gt n7000 using cwm
nokiamodeln91 said:
Again you did not read properly.
Click to expand...
Click to collapse
srry but i have flashed stock rom using odin now my prob is solved.......but why that prob incurred
Hello Sir,
I have the same problem as that guy above. I am unable to boot into download mode itself. How can I connect to odin? Please help sir.
nokiamodeln91 said:
Few things you should have already read and understood.
1. Note N7000 doesn't have a separate active recovery partitions as the S3 and so on.. The recovery is built in to the kernel. So flashing Philz was a correct step.
2. You cannot update the recovery using ROM manager as it writes to the recovery partition which this phone doesn't use. Thus you didn't get the updated recovery.
3. Using odin will not work due to 1&2
Download the Philz kernel DDLC tar version and flash using Odin (uncheck Auto reboot). Once it shows Pass, then power off the phone and remove the usb cable. Boot into recovery using the vol up+home+power. The flash a kernel like Raw r4/r5. reboot into recovery and wipe. Flash Omni, Gapps, SU. Reboot.
Revive your phone by flashing stock firmware using.
So its not really "Bricked Galaxy Note GT-N7000 using CWM" but bricked due to sheer ignorance.
Click to expand...
Click to collapse
techblazes said:
Hello Sir,
I have the same problem as that guy above. I am unable to boot into download mode itself. How can I connect to odin? Please help sir.
Click to expand...
Click to collapse
So no download and recovery mode? Is your battery charged?
nokiamodeln91 said:
So no download and recovery mode? Is your battery charged?
Click to expand...
Click to collapse
I got the download mode after removing and replacing the battery sir. But ODIN is not showing Added message when I connect my device...
techblazes said:
I got the download mode after removing and replacing the battery sir. But ODIN is not showing Added message when I connect my device...
Click to expand...
Click to collapse
Try different USB port, cables, and check if the drivers are installed properly.. Samsung USB drivers..
Looks like the drivers are working back after using Kies. Now I connected the device and ODIN is doing its task. Will update if it successfully finishes the job.
Thanks
Edit: Everything is working as expected. ODIN has flashed CWM on my device and now I am restoring my device using the backup I created yesterday...
Got into the same problem as the OP. Wiped everyting and only have Phliz recovery. Couldn't flash CM11 because according to CM thread must have latest version of CWM (6.0.3.4) while the philz recovery I installed is based on 6.0.2.7. Couldn't flash newer recovery I downloaded from CWM site, it would just freeze and get stuck.
My solution is to just flash CM10.1.3 stable plus gapps. Worked fine. Then proceed from there.
You must have CWM 6.0.4.4 or higher, which is fully SELinux compatible for KitKat.
Just flash Raw kernel r4, reboot in recovery (of raw kernel ) and then do your flash and wipes.
You can't simply install a newer recovery on our device, as kernel and recovery are bound together, but ...THIS IS BASIC KNOWLEDGE FOR OUR DEVICE!!!
#fail²
Just resurrecting this!
After failing to flash KitKat because I had Philz kernel installed, I've got into a real mess.
I'm trying to flash raw kernel r5 but recovery isn't able to mount the SD card and so can't see the zip files on it.
I'm on a Mac and don't have Bootcamp so can't use Odin. Any suggestions?
Oops didnt realise this was kinda necroed :/
Same problem...i have brisked my N7000
i want to know where you have got stock ROM 4.1.2....please help me sir. regards,
manojleo79 said:
i want to know where you have got stock ROM 4.1.2....please help me sir. regards,
Click to expand...
Click to collapse
Go find what you want Here
chirags1986 said:
Here’s what I tried to do.
1. Downloaded CWM 6.0.4.3 touch .zip from clockworkmode.com
2. Renamed it to recovery.img.
3. Converted it to tar.md5 using img to tar tool.
4. Using Odin version 3.07, I tried flashing CWM.6.0.4.3.tar.md5 It stucks at NAND Write start.
Please help me recover my phone.
Specs: Samsung Galaxy NOTE GT-N7000
Original firmware: 4.1.2 kernelDLSC
16 GB internal usb storage
Country India.
Click to expand...
Click to collapse
No need to do all this ^
Flash this using ODIN. Pick the tar file
techblazes said:
Looks like the drivers are working back after using Kies. Now I connected the device and ODIN is doing its task. Will update if it successfully finishes the job.
Thanks
Edit: Everything is working as expected. ODIN has flashed CWM on my device and now I am restoring my device using the backup I created yesterday...
Click to expand...
Click to collapse
Hi all,
I too have the same problem, tried following as instructed
- Download the Philz kernel DDLC tar version (PhilZ-cwm6-DDLSC-ODD-5.11.2.tar)
- flashed using Odin by unchecking Auto reboot option
- Once it showed Pass( it also showed RESTE then went on to became green), then power off the phone and removed the usb cable.
- Tried to boot into recovery by using the vol up+home+power
unfortunately got stuck in the initial screen with yellow triangle
Kindly help
---------- Post added at 04:22 AM ---------- Previous post was at 04:07 AM ----------
techblazes said:
Looks like the drivers are working back after using Kies. Now I connected the device and ODIN is doing its task. Will update if it successfully finishes the job.
Thanks
Edit: Everything is working as expected. ODIN has flashed CWM on my device and now I am restoring my device using the backup I created yesterday...
Click to expand...
Click to collapse
Hi all,
I am new to XDA, and has been following XDA for ROM upgradation on my GTN7000 Samsung note
But today I have landed in the problem when I tried to upgrade the CWM through ROM manager. May be because of half knowledge.
After searching on the XDA I came across above thread identical to the issue I am facing wit same note config, with a great relief I tried to replicate the same for my N7000
steps followed.
- Download the Philz kernel DDLC tar version (PhilZ-cwm6-DDLSC-ODD-5.11.2.tar)
- flashed using Odin by unchecking Auto reboot option
- Once it showed Pass( it also showed RESTE then went on to became green), then power off the phone and removed the usb cable.
- Tried to boot into recovery by using the vol up+home+power
unfortunately got stuck in the initial screen with yellow triangle
Kindly help.
Hi Experts,
please help. I am still stuck with yellow triangle and samsung logo.
Regards
n7000g said:
Hi Experts,
please help. I am still stuck with yellow triangle and samsung logo.
Regards
Click to expand...
Click to collapse
Try downloading XXLTA stock firmware. Flash it with odin, after finished reboot to stock recovery n do a factory wipe reset, reboot. After that download phils XXLTA kernel and flash it in stock recovery. It will give u root n phils recovery. After that u can do whatever u want with ur phone
Sent from my GT-N7000 using XDA Free mobile app