I have froyo with 2.6.32.9 kernel. I can't mount a remote nfs dir..
i can try this (with root privileges):
mount -t nfs remoteIPAdress:/remotedir /sdcard/mnt
i have got "No such device"
Maybe a kernel is not supported the NFS?
What can i do?
if you just need to read write from network drive use estrong file manager from market.
Solution
TiBiSMART said:
I have froyo with 2.6.32.9 kernel. I can't mount a remote nfs dir..
i can try this (with root privileges):
mount -t nfs remoteIPAdress:/remotedir /sdcard/mnt
i have got "No such device"
Maybe a kernel is not supported the NFS?
What can i do?
Click to expand...
Click to collapse
Look trough this thread: forum.xda-developers.com/showthread.php?t=761414
You need cifs.ko module to mount samba shares. Download it from forum.xda-developers.com/attachment.php?attachmentid=420072&d=1287150453, put files on your /sdcard and run these 3 commands:
su
insmod /sdcard/slow-work.ko
insmod /sdcard/cifs.ko
Of course, you need root. And after this you can mount your shares. I also recommend you forum.xda-developers.com/showthread.php?t=756158 this app to mount with nice GUI)
Alex073 said:
Look trough this thread: forum.xda-developers.com/showthread.php?t=761414
You need cifs.ko module to mount samba shares. Download it from forum.xda-developers.com/attachment.php?attachmentid=420072&d=1287150453, put files on your /sdcard and run these 3 commands:
su
insmod /sdcard/slow-work.ko
insmod /sdcard/cifs.ko
Of course, you need root. And after this you can mount your shares. I also recommend you forum.xda-developers.com/showthread.php?t=756158 this app to mount with nice GUI)
Click to expand...
Click to collapse
thx Alex!
but i haven't samba shares. I have nfs shares on the router (with tomato linux)
I think samba share it's very different with nfs share or i know it wrong?
We now have a working cifs.ko and nls_utf.ko. I was able to mount my win7 shares using cifs_manager and stream a few movies using mvideoplayer from the mounted share.
My initial problem seemed to be that I used the android ndk toolchain and the nook kernel is compiled with the codeSourcery toolchain.
After I re-compiled using the codeSourcery toolchain everything works (at least for now)
For those who want to try this.
Download the cifs.ko and nls_utf8.ko modules.
http://dl.dropbox.com/u/16190398/Nook Color 1.0/cifs.ko
http://dl.dropbox.com/u/16190398/Nook Color 1.0/nls_utf8.ko
Mount /system as read write and create a directory under /system/lib called modules. Copy the cifs.ko and nls_utf8.ko modules under this directory.
Type the following from your windows or linux console
adb shell
#mount -o remount,rw /dev/block/mmcblk0p5 /system
#su
#cd /system/lib
#mkdir modules
#exit
#exit
Now you are back in your windows or linux command prompt
adb push cifs.ko /system/lib/modules
adb push nls_utf8.ko /system/lib/modules
adb shell
#su
#insmod /system/lib/modules/cifs.ko
#insmod /system/lib/modules/nls_utf8.ko
if everything went well you should see no errors.
#lsmod
(THis should give you a list of running modules)
You should see something like
nls_utf8 1856 0 - Live 0xbf153000
cifs 240060 0 - Live 0xbf113000
#exit
#exit
Download cifs_manager from the android market and follow the instructions from
http://forum.xda-developers.com/showthread.php?t=756158
If you have Astro file manager installed then tapping on the mounted share from cifs_manager will automatically launch Astro and list the folder/files under that share.
BTW, you can copy the modules anywhere you like even under /sdcard/modules but the default path used by cifs_manager is /system/lib/modules. You can edit the path from cifs manager to point to the location of your cifs.ko module.
---- 05/06/2011 Update ------------
New version of cifs.ko, slow-work.ko for the 1.2 update. This is for kernel version 2.6.32.9
Note, cifs.ko requires some symbols from slow-work.ko so you will need to load slow-work.ko first. If you use cifs-manager, under advanced settings
you can check load modules at startup via insmod and put the path to multiple modules for e.g /system/lib/modules/slow-work.ko:/system/lib/modules/cifs.ko.
Everything seems to be working fine for me. Let me know if you run into issues.
http://dl.dropbox.com/u/16190398/Nook Color 1.2/slow-work.ko
http://dl.dropbox.com/u/16190398/Nook Color 1.2/cifs.ko
http://dl.dropbox.com/u/16190398/Nook Color 1.2/nls_utf8.ko
Alright! This is fantastic! I can even play my SNES roms over wifi. Thanks for sharing.
The only issue I have noticed is that you need to run the insmod commands every time you reboot the device, and I reboot a lot. For now I'm just using gScript to run the 2 commands whenever I need, but it would be great to have them run when the program starts. I know you're just sharing and this has been mentioned in the app thread, just wanted to make my observations known.
Edit: Found a nifty toggle in the settings of cifs managaer that runs the insmod command at startup. I guess I should look before I complain...
any chance you can provide your build environment, so that the rest of us can work on hacking the kernel.
thetoady said:
any chance you can provide your build environment, so that the rest of us can work on hacking the kernel.
Click to expand...
Click to collapse
Setting up the environment is ridiculously easy esp if you have access to a linux box. There is a very well documented wiki page which outlines the process of building your own custom kernel for the nook color.
http://nookdevs.com/NookColor:_Build_the_Original_Kernel
I downloaded the codesourcery tool chain and did the minimum install as I did not care about the IDE and added the path to my environment. THat was about it. Everything else I followed the wiki page.
Here is my .config file if you like. When you run "make menuconfig" you can choose to load an alternate config file instead of the default. Just put this .config (after renaming it to .config_myconfig or something) under your distro/kernel directory.
Let me know if you need anything specific and I'll try to help. I had to add the .txt extension to the config file for xda upload but you can rename it to anything you want.
Hrm, couldn't get that working on my system.
I'm getting this error:
Mountingthe share has failed with an error.
mount: Invalid argument
Thoughts?
pezhore said:
Hrm, couldn't get that working on my system.
I'm getting this error:
Mountingthe share has failed with an error.
mount: Invalid argument
Thoughts?
Click to expand...
Click to collapse
Seems more like an error in configuring CIFS_Manager.
If the module doesnt load you get a different error from Cifs_Manager
"No such device".
Can you try using adb shell and use insmod to load the module manually.
CHeck with lsmod if the module is loaded.
Can you post you cifs_manager screen for the share that you are trying to mount.
pezhore said:
Hrm, couldn't get that working on my system.
I'm getting this error:
Mountingthe share has failed with an error.
mount: Invalid argument
Thoughts?
Click to expand...
Click to collapse
I'm sure you noticed that there's an error in dascud instructions... the 2nd insmod command has a filename typo..
its should read
HTML:
#insmod /system/lib/modules/nls_utf8.ko
dascud.. thanks a ton... as mentioned in my previous post can you please make the change in your post
madrascafe said:
dascud.. thanks a ton... as mentioned in my previous post can you please make the change in your post
Click to expand...
Click to collapse
Done. Were you able to mount the CIFS shares ?
dascud said:
Done. Were you able to mount the CIFS shares ?
Click to expand...
Click to collapse
Yes. No problem at all. I even opened files from root explored & played some music. Thank you for this
firstly thanks dascud's great work! Awesome!
I found a problem when mount with option iocharset=utf8, cifsmanager report below error message then failed to mount
Mounting the share has failed with an error.
mount: Can not access a needed share library
When I remove iocharset=utf8, mount success but I failed to access any folder including non-western characters.
ctos said:
firstly thanks dascud's great work! Awesome!
I found a problem when mount with option iocharset=utf8, cifsmanager report below error message then failed to mount
Mounting the share has failed with an error.
mount: Can not access a needed share library
When I remove iocharset=utf8, mount success but I failed to access any folder including non-western characters.
Click to expand...
Click to collapse
CIfs_manager only loads the cifs.ko modules. You will need to load nls_utf8.ko manually or using a script to display non-western character set. I think you can use something like gscript for the purpose.
I've followed the instructions, but trying to launch the cifsmanager I get
Application not installed on Device
from reading the FAQ on the cifsmanager page, it says its a problem with the launcher. is this because I've updated the NC to 1.01? thanks
dascud said:
CIfs_manager only loads the cifs.ko modules. You will need to load nls_utf8.ko manually or using a script to display non-western character set. I think you can use something like gscript for the purpose.
Click to expand...
Click to collapse
gscript works for me. thanks a lot!
Sent from my LogicPD Zoom2 using XDA App
pezhore said:
Hrm, couldn't get that working on my system.
I'm getting this error:
Mountingthe share has failed with an error.
mount: Invalid argument
Thoughts?
Click to expand...
Click to collapse
I got this when I put the computer name in the share path. I switched to using IP address instead and it worked.
Hi,
Thanks for the files. I didn't follow the steps in the instructions because there is an easier way. Like mention before, ClifsManager only need cifs.ko.
I basically just copy cifs.ko to my sd card. In the CM setting, just change path to
/sdcard/cifs.ko
Setting up shares is easy too, share path is your ip/<sharefolder>, mount point /sdcard/<foldername> and your user/pwd. This worked with Windows 7.
ClifsManager is definitely one of the must have on the NC.
Is there any chance of getting an tun.ko driver built so that this can be used in conjunction with OpenVPN?
Thanks!
smlong426 said:
Is there any chance of getting an tun.ko driver built so that this can be used in conjunction with OpenVPN?
Thanks!
Click to expand...
Click to collapse
Here you go.
http://forum.xda-developers.com/showthread.php?t=889736
Will this, or any software for that matter, allow me to openly share one or more folders on the NC device (SD card), so I can access that NC shared directory from a windows box and copy files back and forth?
KryptoNyte39 said:
Will this, or any software for that matter, allow me to openly share one or more folders on the NC device (SD card), so I can access that NC shared directory from a windows box and copy files back and forth?
Click to expand...
Click to collapse
What you need is a Samba server for Nook. Looks like this has already been accomplished. Maybe you can post a howto once you get this working.
http://forum.xda-developers.com/showpost.php?p=8239139&postcount=128
I'm running on an SD version of CM7 N115.
Used Verygreen's size agnostic to get it loaded on there.
The problem is, I can not install chainfire drivers because /system is not writeable(RW). I was able to install this previously on a dual-boot SD card with phiremod on it.
What I've tried
ES file explorer change permissions- Result: Denied
ES file explorer root options- mount system as writeable option- Result "failed to mount"
Was gonna try the ADB method but my device isn't even recognized when I start it up.
Anyone think they could lead me in the right direction?
I figured it out. Anyone else having trouble mounting partitions or making /system rw to install these drivers this is what I did.
1. Open up terminal emulator on your nook
2. type su and enter. type "bash" without the quotes.
3. then type mount -o remount,rw -t yaffs2 /dev/block/mtdblk3 /system
I was able to install the drivers after this.
Or you can install the latest Busybox using the Busybox Installer app with the blue arrow on the icon. The other one with the gears in the icon doesn't work for me.
DrSarcasmo said:
Or you can install the latest Busybox using the Busybox Installer app with the blue arrow on the icon. The other one with the gears in the icon doesn't work for me.
Click to expand...
Click to collapse
I tried this fix with a friends nook who had the same problem, but it did not work. Still had to use the terminal emulator to get it mounted and installed.
Well I unable to Rawat partition from terminal emulator ...as whenever I type su it gives error ...saying permission denied ..so plaza help
Sent from my GT-I5700 using Tapatalk
mlovesu said:
Well I unable to Rawat partition from terminal emulator ...as whenever I type su it gives error ...saying permission denied ..so plaza help
Sent from my GT-I5700 using Tapatalk
Click to expand...
Click to collapse
You will have to provide more information. Like if your running off SD, what version of CM7 your running...etc.
I bought a tab S2 about a month ago to replace my HP touchpad i've had/been using since the firesale about 4 yrs ago. At the time of purchase, I discovered really quickly that lack of custom roms on the S2 at that time was to much of an issue, and I returned it.
I am however seeing an alpha of CyanogenMod for the tab S2 that's looking pretty close to usable. Given that the tab is also on sale this week, i'm very much inclined to repurchase it, however, question: Does cifs/smb mounting remote filesystems work with the tab s2 rom that was posted?
You can do that on the stock S2 with many different apps in the Play Store. ie. ES File Explorer, Solid Explorer, AndSMB
nrage23 said:
You can do that on the stock S2 with many different apps in the Play Store. ie. ES File Explorer, Solid Explorer, AndSMB
Click to expand...
Click to collapse
Correct me please if i'm wrong, but those applications just allow me to browse remote filesystems from the application itself. They don't smb mount them. It's the cifs.ko file i'm missing (which i'm assuming is included with cm12?)
The cifs.ko file would have to be done via a kernel module based on what I seen from other devices. I do not know if it is included in CM kernels or not.
Did you or anyone get cifs working?
I understand it may be possible to compile a cifs.ko and insmod it.
I don't know how possible that is but whilst I'm googling how to compile I thought I'd see if anyone had done it.
Cheers, Guy
I got CIFS mount working on my 710 by installing Neked_Nook_MM-710-V1 and my fork of @engine95 mm kernel which has the cifs module enabled.
Hi thanks for the reply
I don't suppose you have any tips or suggested posts/ guides I could use to recreate your setup?
I guess I could figure out how to get neked nook flashed based on the guides but the fork of the engine95 Kernel that includes cifs..? I can see a post about the permissive kernel by engine95..
Is your device fully functional and stable now?
Thanks a lot,
Guy
Neked nook is very stable. My tab s2 has not crashed so far with that rom, and my custom kernel. I have attached my boot image. This is a fork of engine95 kernel with just cifs module added. This kernel only works on MM.
Extract boot.zip and flash boot.img via twrp(boot image) or fastboot.
You can use the attached cifs manager to mount your smb/cifs drives on android as a directory.
I am only able to mount it to /mnt/drive. I could not get it to mount to /sdcard.
Awesome thanks
I use cifsmanager on a Chuwi hi12 that i've rooted, it already has the cifs modules and permissive kernel so I am able to mount the shares almost wherever I like - and I use cifsmanager to poke 1TB of satellite images into the map folder of my mapping app on the SD card. But I don't know if cifs was in the kernel (chuwi is on lollipop) already or part of the rooting process, would love to recreate the setup on my samsung as its a far superior device.
I'll give it a go this weekend, really appreciate you taking the time to upload the files you used.
Cheers,
Guy
Hi Currowth,
I know life is too short to help each noob, but can I trouble you for another pointer?
I used the full image of Neked Nook MM v1, and the boot image you provided, and the tablet is working great, and if I cat /proc/filesystems I can now see cifs listed....but..
I can't mount any cifs shares - to anywhere, including /mnt/drive. I get the mount failed Mount: I/O error.
(I think my process was along the lines of: ODIN to cf-autoroot (i'd actually done this a while before starting this thread so including in case its relevant, as i dont know if there is an issue with a /system or systemless root?) then I ODIN'd TWRP on, took a full backup with TWRP and then wiped data,cache, system etc and flashed Neked Nook on, booted into NNook, then went back to twrp and put the boot image you provided on.
Any help greatly appreciated.
If it means anything I'm not trying to watch Batman in bed, I'm trying to put together a repeatable solution for me and my overland traveller friends so we can take huge amounts of map and satellite image tiles completely offline when we're driving our landrovers, toyotas etc across deserts where sat navs or road maps are useless.
thanks again,
Guy
*Edited to add i've been googling the crap out of the mount i/o error, tried a patched version of cifsmanager, tried copying the apk to the system/apps folder and changing its permissions before reinstalling.. no joy
Looks like it can be a root issue. This is what i flashed to get root. "BETA-SuperSU-v2.74-2-20160519174328"
try to install busybox also and try again.
If that does not work:
Can you try to run this in adb shell as root?
mount -t cifs -o username="username",password="password" //smbpath/dir mnt/cifs/dir
replace "username,"password", and smbpath/dir
Guy009 said:
Hi Currowth,
I know life is too short to help each noob, but can I trouble you for another pointer?
I used the full image of Neked Nook MM v1, and the boot image you provided, and the tablet is working great, and if I cat /proc/filesystems I can now see cifs listed....but..
I can't mount any cifs shares - to anywhere, including /mnt/drive. I get the mount failed Mount: I/O error.
(I think my process was along the lines of: ODIN to cf-autoroot (i'd actually done this a while before starting this thread so including in case its relevant, as i dont know if there is an issue with a /system or systemless root?) then I ODIN'd TWRP on, took a full backup with TWRP and then wiped data,cache, system etc and flashed Neked Nook on, booted into NNook, then went back to twrp and put the boot image you provided on.
Any help greatly appreciated.
If it means anything I'm not trying to watch Batman in bed, I'm trying to put together a repeatable solution for me and my overland traveller friends so we can take huge amounts of map and satellite image tiles completely offline when we're driving our landrovers, toyotas etc across deserts where sat navs or road maps are useless.
thanks again,
Guy
*Edited to add i've been googling the crap out of the mount i/o error, tried a patched version of cifsmanager, tried copying the apk to the system/apps folder and changing its permissions before reinstalling.. no joy
Click to expand...
Click to collapse
Thanks for coming back Currowth,
Ok my SuperSU from the original cf-autoroot was 2.46. I assumed I needed to remove that so I ran the unroot function and then used twrp to flash the version you linked to, after reboot SuperSu is at 2.74.
Unfortunately i have the same I/O error.
I also ran adb root from my win10 machine and tried the manual mount command as you suggested - it returns I/O error also. Initially it said 'no such file or directory' so I manually created the dir, with the name the same as the share dir, in /mnt/cifs.
command output
255|[email protected]:/ # mount -t cifs -o username=admin,password=admin //10.10.10.254/Public1 /mnt/cifs/Public1
mount: No such file or directory
255|[email protected]:/ # cd /mnt/cifs
[email protected]:/mnt/cifs # mkdir Public1
255|[email protected]:/ # mount -t cifs -o username=admin,password=admin //10.10.10.254/Public1 /mnt/cifs/Public1
mount: I/O error
One other thing, in the NNook image thread, i see it says make sure you 'ODIN M' first. I'm embarrassed to say i don't know what that means!
update in mean time: i started again, based on doing all the flashing whilst rooted with the older supersu. So i've unrooted, rooted with your beta_xx linked above, wiped system, cache, data and dalvik, flashed the Neked Nook full MM V1 ROM, booted into that, then back to twrp to flash the boot.img you linked above, installed busybox, the linked cifsmanager, tried to mount, then updated supersu as recommended in NNook thread, rebooted and tried mount again but no joy, always getting i/o error.
just for further info, the shared folder does work on my chuwi with cifsmanager, so hopefully that is not the issue. Before I re-did the ROM and the boot image, i installed paragon ntfs and was able to successfully mount an NTFS formatted SD card into the /mnt/cifs/public1 directory.
interestingly cifsmanager couldn't create the directories under /mnt, but i was able to create them manually and then get an IO error. I changed permissions on the /mnt/cifs folder and now it can create the directory when attempting to mount but still gets IO error.
i'm beyond my depth, guess it feels like cifsmanager is either not working or not got permission - or something i've done prior to the NN and kernel flashes has caused an issue.
Its starting to feel like a lost cause. You know better than me - if this is the end of the easy flash-type fixes to try, perhaps I should just throw in the towel.
Thanks again for your help Currowth, you're a gent
I just did a clean install to replicate you issue, but was not able to reproduce it. 'ODIN M' means that install a marshmallow rom first via ODIN. If you already came from a marshmallow ROM, you can ignore it.
The steps i took to ensure that i am was able to get cifs were the following:
First i installed "Neked_Nook_MM-710-V1.zip"
Next I installed "BETA-SuperSU-v2.74-2-20160519174328.zip"
Last i installed "boot.img"
I did this all through twrp.
Reboot, dont setup knox if it asks you to.
Try to do a wipe, then reinstall the following and try again.
Guy009 said:
Thanks for coming back Currowth,
Ok my SuperSU from the original cf-autoroot was 2.46. I assumed I needed to remove that so I ran the unroot function and then used twrp to flash the version you linked to, after reboot SuperSu is at 2.74.
Unfortunately i have the same I/O error.
I also ran adb root from my win10 machine and tried the manual mount command as you suggested - it returns I/O error also. Initially it said 'no such file or directory' so I manually created the dir, with the name the same as the share dir, in /mnt/cifs.
command output
255|[email protected]:/ # mount -t cifs -o username=admin,password=admin //10.10.10.254/Public1 /mnt/cifs/Public1
mount: No such file or directory
255|[email protected]:/ # cd /mnt/cifs
[email protected]:/mnt/cifs # mkdir Public1
255|[email protected]:/ # mount -t cifs -o username=admin,password=admin //10.10.10.254/Public1 /mnt/cifs/Public1
mount: I/O error
One other thing, in the NNook image thread, i see it says make sure you 'ODIN M' first. I'm embarrassed to say i don't know what that means!
update in mean time: i started again, based on doing all the flashing whilst rooted with the older supersu. So i've unrooted, rooted with your beta_xx linked above, wiped system, cache, data and dalvik, flashed the Neked Nook full MM V1 ROM, booted into that, then back to twrp to flash the boot.img you linked above, installed busybox, the linked cifsmanager, tried to mount, then updated supersu as recommended in NNook thread, rebooted and tried mount again but no joy, always getting i/o error.
just for further info, the shared folder does work on my chuwi with cifsmanager, so hopefully that is not the issue. Before I re-did the ROM and the boot image, i installed paragon ntfs and was able to successfully mount an NTFS formatted SD card into the /mnt/cifs/public1 directory.
interestingly cifsmanager couldn't create the directories under /mnt, but i was able to create them manually and then get an IO error. I changed permissions on the /mnt/cifs folder and now it can create the directory when attempting to mount but still gets IO error.
i'm beyond my depth, guess it feels like cifsmanager is either not working or not got permission - or something i've done prior to the NN and kernel flashes has caused an issue.
Its starting to feel like a lost cause. You know better than me - if this is the end of the easy flash-type fixes to try, perhaps I should just throw in the towel.
Thanks again for your help Currowth, you're a gent
Click to expand...
Click to collapse
Thanks Currowth I will try and give it a go tomorrow
Just a thought, are you booting into Android after each step, or doing all the flashing in one twrp session then doing first boot once all items are flashed?
I flashed them in one session without rebooting.
Hi Currowth, I've had a breakthrough!
I re did the NNook/root/boot image in the order you advised.
I have been using a patriot node WiFi disk enclosure, that works with cifs manager on my other tablet. Today I was working away from the WiFi disk so I made do with a windows pc to provide a shared folder. After setting cifs manager up I was able to mount the share under /mnt, but not to any other location. I got back to my WiFi disk, and that continued to give an io error!? So windows worked but the patriot didn't. Weird. I'd ruled the patriot out as it works on my 5.1 lollipop tab.
So I continued to mess around... I had stumbled across another app called mount manager by Ryan conrad (I don't have the link but I have the apk) which has more noob-friendly options and found if I used the ntlmv2 option I could mount the patriot into /mnt !
I did try to get it to mount to other locations and although it succeeded in the app, the mounted folder was empty.
As my app - Osmand+ has the option to manually specify it data folders I created a 777 permission folder for it under /mnt, and then mounted the patriot containing my satellite images into the appropriate empty tile folder.
Working solution!!! If a little messy.
Thanks so much for your help, the Samsung s2 is about 400% faster and more practical than the other tablet so really happy
I don't know why android devices are so limited by manufacturers when the OS is capable of so much, but that's a different conversation haha
A follow up on this in case it is useful to others...
Using /mnt was a bad idea. /mnt is mounted / built on a system partition as a mount point for other file systems or devices (how I have explained it to myself). So anything you add here as a folder gets destroyed when you reboot.
So, I installed my osmand app to /data/osmand and then used a root terminal to run "chmod -R 777 /data/osmand/" to set permissions to 777 on that folder and all subfolders.
After doing this I was able to get mount manager to mount my cifs share into an empty subfolder in the apps folder tree.
I initially tried changing permissions on /data in case it was needed for folders further down the tree, but it was not needed - which is just as well because again, /data is mounted at boot with 771 permissions, so changes 777 back to 771 after reboot. To change that would involve unpacking the boot image in order to edit the init.rc file and then repacking. I didn't bother it was not required.
If anyone wants mount manager, Google 'ryan conrad mount manager' and take your chance with the apk sites, can't remember whigh site I used!