Database Develop

Getting Ready for NVFlash (~fastboot) w/Drivers

Okay,
So I suspect a few of you are going to want to jump on the NVFlash train that Paul is easing out of the station at the moment. NVFLash is the Nvidia utility for writing to the ROM on your Tegra2 phone, reading details and otherwise critical low level functions. For all intents and purposes this is akin to fastboot for many devices (although not the same as).
Whilst I'm not 100% certain I believe this is the only way to install a custom recovery on your Optimus 2x (when one is released) and therefore, if you hope to install a custom ROM, you will need to get NVFlash up and running.
Below are the simple instructions and links to the necessary files.
** WARNING **
NVFlash is a powerful utility that works at a very low level on your phone. There are few safety mechanisms built into a tool like this because it is intended for use by people with suitable training. NVFlash can not physically damage your phone but it can render it inoperable. It is unlikely to create an irrecoverable situation but it does have the power to create a situation that you can not recover from yourself requiring factory maintenance. Warranty coverage for your phone is not assured after using NVFlash. Please proceed with the use of the tool carefully and at your own risk. Neither myself nor XDA-Developers can be held accountable for any consequences from the use of NVFlash on your phone.​
Click to expand...
Click to collapse
Get Software
Grab the NFVlash utility from here: http://djmcnz.batteryboss.org/stuff/NVFlash.zip
Extract the contents of that archive to a single directory
Grab the NVidia boot-recovery driver from here: http://djmcnz.batteryboss.org/stuff/nvmobileboot.rar
Extract the contents of that archive to a different directory
Prepare Phone
Power down phone
Remove battery
Hold VOL_DWN+VOL_UP & plug in USB connection from computer (note, your phone will not visibly respond but it will boot to APX mode quickly)
Open Device Manager in Windows and you should see "APX Device" listed with an error
If not, rinse and repeat
Install Driver
Right click on the APX device
Select 'Update driver software'
Select 'Browse my computer...'
Select 'Let me pick...'
Select 'Have disk'
Browse to directory to extracted the *driver* software to above
Select 'NVIDIA USB Boot-recovery driver for mobile devices'
Accept any warnings, including the big red alert (you may need to disable UAC)
Now in Device Manager under 'USB Controllers' you should have an 'NVIDIA USB Boot-recovery driver for mobile devices'
If not, uninstall the driver, reboot rinse and repeat
Testing
Navigate the the directory you extracted the NVFlash archive to
Run a harmless command such as "nvflash --sync"
You should get something back like:
Code:
Nvflash started
rcm version 0X20001
System Information:
chip name: unknown
chip id: 0x20 major: 1 minor: 3
chip sku: 0xf
chip uid: 0x0280404444803457
macrovision: disabled
hdcp: enabled
sbk burned: false
dk burned: false
boot device: emmc
operating mode: 3
device config strap: 0
device config fuse: 17
sdram config strap: 0
If so, you're good to go, now just be patient...
Helped you? Hit 'Thanks' below...

thx for the info
Sent from my LG-P990 using Tapatalk

WOW great so fast already !!!
Thanks m8, now just waiting for interesting Roms

I got rcm version 0x4
then device disapear from list. What It's means?

Can some one explain the testing part how to I navigate and enter command
EDITED: What am I doing wrong
Nvflash started
rcm version 0X20001
System Information:
chip name: unknown
chip id: 0x20 major: 1 minor: 4
chip sku: 0xf
chip uid: 0x0428000543a15057
macrovision: disabled
hdcp: enabled
sbk burned: false
dk burned: false
boot device: emmc
operating mode: 3
device config strap: 0
device config fuse: 0
sdram config strap: 0
command failure: no bootloader was specified

It says that you didn't specify/ provide bootloader.bin file in the command line. Find nvflash ROMs thread and compare the command lines.

This nvflash dotn work on win7 64bit..any solution?

ravenoss said:
This nvflash dotn work on win7 64bit..any solution?
Click to expand...
Click to collapse
Yes it does, used it on saturday on a win7 64bit computer.
Only difference is that i followed this guid:
http://www.modaco.com/topic/335474-25-mar-nvflash-stock-rom-release-v10b-dated-1300166062-15032011/

It works with Win7 64 bit. I'm using it.:good:

[Q] Bricked 8.9 3G - need help with nvflash

Hi guys,
in moment of insanity I bricked my Tab using Odin. Now it's stuck in APX mode and I need help using nvflash. This is what I get:
D:\nvflash>nvflash --bl bootloader.bin --go
Nvflash started
rcm version 0X20001
System Information:
chip name: unknown
chip id: 0x20 major: 1 minor: 4
chip sku: 0x4
chip uid: 0x0384018441400517
macrovision: disabled
hdcp: enabled
sbk burned: false
dk burned: false
boot device: emmc
operating mode: 3
device config strap: 0
device config fuse: 17
sdram config strap: 0
downloading bootloader -- load address: 0x108000 entry point: 0x108000
sending file: bootloader.bin
\ 1941020/1941020 bytes sent
bootloader.bin sent successfully
waiting for bootloader to initialize
bootloader failed NvError 0x0
command failure: bootloader download failed
Please note that in system information for chip name stands "unknown" instead "t20". I tried to drain battery, I even opened it and disconnected battery, with no result.
Thx for assistance

[Q] Laugh at this

Hi everyone,
as I am looking for help search engines, I ended here on this helpfull community. I got a P990 from Fido Canada
Problem:
After updating rom to nightly version from nov12, I decided to change to a version stable version which I took 7.0.2 Stable.
Once I did this, ever since the phone freezes at LG logo. Now I know and Ive read a pile load of methods on restoring with clockwork and smartflash... Anyway, im missing something here and I need someone to help me to get the phone back to default. Also, I cant find the Fido ROM anywhere.... just broken links.
I will cooperate with those that can help me out here.
Ive been searching all day.
Thanks

NVFlash results:
C:\Users\HOME\Desktop\NVFlash>nvflash --sync
Nvflash started
rcm version 0X20001
System Information:
chip name: unknown
chip id: 0x20 major: 1 minor: 4
chip sku: 0xf
chip uid: 0x0450724741c013d7
macrovision: disabled
hdcp: enabled
sbk burned: false
dk burned: false
boot device: emmc
operating mode: 3
device config strap: 0
device config fuse: 17
sdram config strap: 0
command failure: no bootloader was specified

THANKS
SOLVED !!
http://forum.xda-developers.com/showthread.php?t=1975274

LG Optimus 2X - Wont boot and flash

I have LG Optimus 2X P990 which was working normally till last two months.
In last two months it get slower and slower and now wont turn on and wont flash.
When I connect it to PC - PC recognize it and I can start flash process, but it always stuck
at the same step :
Nvflash started
rcm version 0X20001
System information:
chip name : unknown
chip id: 0x20 major:1 minor: 3
chip sku: 0xf
chip uid: 0x0280414640802297
macrovision: disabled
hdcp: enabled
sbk burned: false
dk burned: false
boot device: emmc
operating mode: 3
device config strap: 0
device config fuse : 17
sdram config strip: 0
sending file: 0-bct-settings.bct
- 4080/4080 bytes sent
0-bct-settings.bct sent successfully
odm data: 0xc8000
downloading bootloader -- load address: 0x10800 entry point: 0x108000
sending file: 0-fastboot.img
/ 1024992/1024992 bytes sent
0-fastboot.img sent successfully
waiting for bootloader to initialize
bootloader download successfully
setting device: 2 3
creating partition : BCT
failed executing command 16 NvError 0x120002
command failure: create failed <bad data>
bootloader status: failed to create partition <code:10> message: nverror:0x5 <0x1000005> flags:0
In this proccess, phone boot up with S/W upgrade... please wait text on it.
I have tried at 3 PC and 1 laptop PC - on Windows XP SP2/SP3 and Windows 7 32-bit
All drivers were installed and I dont know what to do to get phone boot and get to flash it..
Any ideas ?
Thx.

[Q] Unable to unbrick my bricked phone

Dear People,
I have a problem with my LG P990. It keep hanging on the LG logo with a blue bar under it. I searched the symptons and I found out it is bricked.
This happend after i hard resetted my rooted phone. I tried the following things:
1. I have tried to use Smartflash but my PC wasn't able to recognize my phone when I plugged it in while holding the Volume Down button. I installed different drivers. The ones that were provided by a website and the drivers from the LG Support website.
2. I tried to use AIO toolkit but I get the following error I couldn't find any solutions for on the internet:
======================================
The phone will display a S/W download.. screen,
while the command-window will inform you of the progress.
Nvflash started
rcm version 0X20001
System Information:
chip name: unknown
chip id: 0x20 major: 1 minor: 4
chip sku: 0xf
chip uid: 0x0a7c818341ff2117
macrovision: disabled
hdcp: enabled
sbk burned: false
dk burned: false
boot device: emmc
operating mode: 3
device config strap: 0
device config fuse: 17
sdram config strap: 0
downloading bootloader -- load address: 0x108000 entry point: 0x108000
sending file: fastboot.bin
/ 1027184/1027184 bytes sent
fastboot.bin sent successfully
waiting for bootloader to initialize
bootloader downloaded successfully
Succesfully updated partition table information to C:\Users\R...
\Temp\partitions.txt
Checking partition layout...Current Partition Layout could not be detected
Operation aborted
Press any key to return to main menu
I have Windows 8.1 but also tested these 2 methods on a Windows 7 PC.
I read about another method from one of the XDA members called ProgMaq but every download gives a 404 Not Found message or my browers warns me to not go to the website because it is not safe.
What can I do to unbrick my phone?

You should try to change bootloader and follow the instructions in aio

Change SD Card file system?