Hi,I seem to be having this problem on CM10 that the SIM card occasionally disconnects and the phone prompts me to restart.Is it a bug?
Sent from my LG-P970 using xda premium
i had a similar problem, in original CM10, I lost connection to the network, and had to reboot. Also coldnt do any tyask SIM related. Changed to JellyBam (which is CM10 based) and had no problems.
Baseband, and others were fine.
Sorry I cant help you further
is a rom error
you can try to flash a new/old baseband.... im not sure but this could help, im also having these problems .... sometimes i hav no signal and i can't get calls .....
Related
I have tried CM9.0, 9.1, and I am now on CM10 nightlies. But they all give me the same problem. It won't activate with the Verizon service I paid for, and when it does, it fails halfway through and the radio is disabled and won't re-enable. On CM9, a reflash on CM9 was required to get the radio working again. On CM10, I can just reboot. One issue with that though... I can choose not to activate and it still gets online, but then at the end of the day, the tablet is locking up and rebooting constantly. I believe it is trying to provision in the background (I once attempted an activation during this time, then rebooted, and it was stable again for a while). I have tried EC02 and EF01. Am I the only one experiencing this? If I don't have Verizon service the tablet runs a little more smoothly, but I would like to have it. Surely someone else must have a P1C with CM9/10 and have an active Verizon service.
they work for me modem wise, but constant restarts and force closes
help wanted
hey, people!) can u help me, please?!
how did u enabled radio (modem) on p1c?!
I stuck on a sprint stock rom because on cm9 or cm 10 my data isn't working!!(((
I am using my tab in Ukraine, whet it's on stock - there's data connection...
but when I tried to flash ics or jb (with modem.bin or without, by heimdall)
it is no connection to carrier at all!!
exuse me for mistakes, I'm not english-speaking))
Loocheg said:
hey, people!) can u help me, please?!
how did u enabled radio (modem) on p1c?!
I stuck on a sprint stock rom because on cm9 or cm 10 my data isn't working!!(((
I am using my tab in Ukraine, whet it's on stock - there's data connection...
but when I tried to flash ics or jb (with modem.bin or without, by heimdall)
it is no connection to carrier at all!!
exuse me for mistakes, I'm not english-speaking))
Click to expand...
Click to collapse
I have the same problem, zemlyak )))
Heeey!!! Can I have an aswer, please?!
Sent from my SPH-P100 using xda app-developers app
Hi guys
I own a Lg Optimus 2x P990 and I am currently running the JB CM10 Build by tonyp.
In the past I ran ICS builds like Django Manouche and other cm10 builds like Paranoid Android.
The cm10, builds are running very well on my device but there is a possible bug ... I use my phone during the day, and if I send, receive messages I usualy keep my connection with the mobile network.
When I wake up (phone is inactive for several houres) , and I just unlock my phone, the network bar is full, but I can't send or receive messages. When I go into Settings and try to search for a network I get " Error while searching for network ". A simple reboot can fix this problem.
If I don't use my phone often during the day, It does the same. I unlock after a few houres, statusbar Icon is full, but no network available... (so if someone tried to reach me by calling or texting, I can only see it after a reboot.)
The second thing is that I always have R above the network signal, even when I am not roaming at all ...
I tried to change my baseband when I was on Paranoid Android, but that didn't work ...
There is NO problem with my mobile network on the ICS build (like django manouche) , but the ROM isn't fast enough and I like stock android more ... ( I think)
I always did a full wipe, and followed the instructions ... I am on the latest Kowalski Kernel at the moment...
If I erase internal memery, could that do something?
Thanks for your time.
Arthur
?
That is strange. I am running cm 10.1 too and I have sometimes problems with logging in to operator after reboot. But your problem seems bigger. Did you tried to turn on/off mobile data (dont know how it's in english version)? And try to change to 2G/3G, maybe that might solve something. Or maybe there is an bug in new Bootloader (if you ran django mandouche and tonyp's), so if that doesnt help to you, try to downgrade to old BL
Reply
DeeKay773 said:
That is strange. I am running cm 10.1 too and I have sometimes problems with logging in to operator after reboot. But your problem seems bigger. Did you tried to turn on/off mobile data (dont know how it's in english version)? And try to change to 2G/3G, maybe that might solve something. Or maybe there is an bug in new Bootloader (if you ran django mandouche and tonyp's), so if that doesnt help to you, try to downgrade to old BL
Click to expand...
Click to collapse
Thanks for the reply ! My phone came with the old bootloader, and I installed Nova HD CM9 on it and had the same problem.
I need to try the 2g/3g settings...
When the error occures, I can try to turn data on/off all I want .. only a reboot helps ...
Django is on the new bootloader, and worked fine ... So I believe it's a CM problem... ?
I also dialed *#*#4636#*#* and changed to WCMDA Preferred (but didn't help)
Any more advice ?
APN - check it!
also.
try different base band.
try 30b
Reply
R0B3RTF1SH3R said:
APN - check it!
also.
try different base band.
try 30b
Click to expand...
Click to collapse
My apn seems fine ... altough here in Belgium we have a weird situation ... I am on operator B (telenet) wich uses the network (the infrastructure) of operator A (mobistar) ...
I'll try that baseband!
Thanks for the reply!
Reply
arthurderyckere said:
My apn seems fine ... altough here in Belgium we have a weird situation ... I am on operator B (telenet) wich uses the network (the infrastructure) of operator A (mobistar) ...
I'll try that baseband!
Thanks for the reply!
Click to expand...
Click to collapse
I tried to change the APN, or add a APN but when I try to save it, it's not in the list ...
So I changed back to default ...
testing
I just followed this guide .. I let you know If it worked for me ..
http://forum.xda-developers.com/showthread.php?t=2087215
Not working
arthurderyckere said:
I just followed this guide .. I let you know If it worked for me ..
http://forum.xda-developers.com/showthread.php?t=2087215
Click to expand...
Click to collapse
Still having this same problem over and over ... have to reboot my phone every morning ...
anyone ?
Thanks
I also have this problem, tried every possible combination of baseband and ril, still couldn't solve it.
Ended up returning to v30b ICS, where the problem doesn't occur.
Hi all, I've been trawling through the forums for over a day trying to fix my problem of no mobile network on any of the 4.2.2 based roms,
I can see my imei no, baseband (I8190NXXAMD3) etc. However my network is "unknown:0", signal strength "0dbm 99asu" and the rom doesn't see my phone number,
I have, flashed + reflashed with wipes of data cache and dalvik.
Checked my APN settings (default is ok, though on initial boot isn't selected) [also reentering my apn settings and clicking save seems to delete my APN(s)].
I have disabled wifi + gps etc, aeroplane mode on+off several times, many reboots etc. ( i have noticed that on first boot the mobile data tile(toggle switch) says "no service" and the signal indicator is shown in the status/notification bar [empty, no signal], but after enabling then disabling aeroplane mode it changes to "emergency calls only" and the signal indicator icon disappears from the top right,
I have tried Maclaws 4.2.2 releases (aokp,cm10.1,PAC) and Team Golden's releases (including the latest ParanoidAndroid 3.69) all have no mobile network issue ass described.
I also found a modified build.prop on one of the other threads (for aokp) and imported it over the one i had, made no difference
the only thing i haven't done is flash via odin, all flashes are performed from the latest CWM (not trusting this laptop atm)
DModv6 is working fine for now, but i'd really like to update to one of the 4.2.2 releases, developers doing a great job bringing it to the s3 mini =D
If there is anything else i can do to assist in fixing this issue please don't hesitate to ask me.
flash official firmware of your region >root>use csc changer to change csc >then follow instruction to install 4.2.2 rom , i think the CSC is the problem .
TRY PACMAN(team golden)
CSC is not the problem here. CM-based roms doesn't even use it.
You're not the only one with this problem. I've seen a few more with same issue.
Anyway..you should really try to flash a stock firmware using odin to see if everything is working ok, not only on dmod.
tys0n said:
CSC is not the problem here. CM-based roms doesn't even use it.
You're not the only one with this problem. I've seen a few more with same issue.
Anyway..you should really try to flash a stock firmware using odin to see if everything is working ok, not only on dmod.
Click to expand...
Click to collapse
thanks for the input guys, i'm pretty sure everything is ok but ill see about flashing with odin, just need to get a hold of a stable pc for a bit =D
Have you tried resetting APN in mobile network settings
Sent from my GT-I8190 using xda app-developers app
omarblu said:
Have you tried resetting APN in mobile network settings
Sent from my GT-I8190 using xda app-developers app
Click to expand...
Click to collapse
Yes thanks, tried that (as i said) =]
still waiting for a good opportunity to reflash stock with odin. Hopefully might solve some of the random "front end" crashes i get.
i will update the thread as i have flashed and if any other revelations come to light.
Thanks for all the help here at xda =D
flashed...
ok so i downloaded firmware - I8190NXXALL6_H3GALL2_UK_H3G_Android_4.1.2.zip
and flashed with odin, log stated no errors, but stuck in a boot loop. (on first boot cwm asks to install unsigned package, clicked yes, restart, then stuck on samsung loading screen)
Reflashed maclaw studios latest aokp release just to test,inc factory reset and dalvik wipe ofc, but still no network =[ (checked APN, aeroplane mode on/off etc)
also back to baseband ALL6 instead of AMD3 now
Restored backup to DMod6 (still got ALL6 baseband) and everything working again.
Just wish i could get 4.2.2 working with network...
Any ideas?
thanks
* Also thought that firmware should have had the H3G logo for boot animation, not samsung.. bit odd =]
Any help?
Anyone had any similar problems, and managed to overcome them?
Or can anyone point me to any tuts/guides so i can maybe fix the problem myself, whether it be "splicing" 2 ROM's or whatever.
Buddy believe me I tried it out with Maclaw's CM10.1 and I don't know why but I had the exact same problem than you so my only solution was to test it again with stock rom and later with Dmod v6 too check everything was all right againg and my issue was fixed, hope to help you in something and find out a solution for your problem.
Sent from my GT-I8190L using xda app-developers app
SoulReaver19 said:
Buddy believe me I tried it out with Maclaw's CM10.1 and I don't know why but I had the exact same problem than you so my only solution was to test it again with stock rom and later with Dmod v6 too check everything was all right againg and my issue was fixed, hope to help you in something and find out a solution for your problem.
Sent from my GT-I8190L using xda app-developers app
Click to expand...
Click to collapse
So let me get this straight. Is this what u did?
Cm10.1 - no network
Flash stock - all working
Flash Dmod6 - all working
Flash Cm10.1 again - working network.
Sent from my GT-I8190N using xda app-developers app
I didn't want to try again with Maclaw's rom so I stayed with the Dmod rom with all the features working normally
Sent from my GT-I8190L using xda app-developers app
Cm10.1 01/08/13
SoulReaver19 said:
I didn't want to try again with Maclaw's rom so I stayed with the Dmod rom with all the features working normally
Sent from my GT-I8190L using xda app-developers app
Click to expand...
Click to collapse
Ok thanks for your input,
Well i tried latest CM10.1 already (big thanks to the maclaw team) but still no network, currently on ALL6 baseband, same issues as previously, no network, presuming sim drivers not working properly for me as it doesnt show my number.
Any1 got a link to somewhere with a list of available Modem files (different basebands) ready for download?
sheephog said:
Ok thanks for your input,
Well i tried latest CM10.1 already (big thanks to the maclaw team) but still no network, currently on ALL6 baseband, same issues as previously, no network, presuming sim drivers not working properly for me as it doesnt show my number.
Any1 got a link to somewhere with a list of available Modem files (different basebands) ready for download?
Click to expand...
Click to collapse
new Version available already,
Solution
Dear Sheephog,
Did you find a solution for this? I'm having a very similar problem with CM11 on i8190n. On Touchwiz, mobile network and data are fine. But when I install Maclaw's latest CM11 build (whether using clockworkmod or TWRP), factory reset, then reboot, CM11 boots up nicely /except/ mobile network and data are unknown. Network Operators (in Settings>Wireless and networks>Mobile Network Settings) yields "Error while searching for networks". A restore to Touchwiz gets mobile network and data back no problem.
(My baseband version is I8190NXXAMJ2.)
Thanks
Srdgh said:
Dear Sheephog,
Did you find a solution for this? I'm having a very similar problem with CM11 on i8190n. On Touchwiz, mobile network and data are fine. But when I install Maclaw's latest CM11 build (whether using clockworkmod or TWRP), factory reset, then reboot, CM11 boots up nicely /except/ mobile network and data are unknown. Network Operators (in Settings>Wireless and networks>Mobile Network Settings) yields "Error while searching for networks". A restore to Touchwiz gets mobile network and data back no problem.
(My baseband version is I8190NXXAMJ2.)
Thanks
Click to expand...
Click to collapse
You will find a solution in this thread http://forum.xda-developers.com/showthread.php?t=2566918
modemfs flashable .zip file for I8190N is in my post http://forum.xda-developers.com/showpost.php?p=48607820&postcount=11
I flashed PA from Cynogen and all was working well when suddenly my signal went to 0. I thought that there was no reception but after sometime noticed that it was still like that. Tried this sim on another phone and it worked. Tried a new sim on this phone and it was not working. Did a clean flash of PA, flashed CM. The problem is still there. Any one else faced this issue before?
yes many a times, use the search.... cause you are not making me go through my profile just to copy paste the fix in the lpy thread.
Sent from my GT-N7000 using Tapatalk 2
Hi Guys i have a problem in my lenovo A7000 ,it was working fine but from few days i am not able to make any call because when i dial a number the network signal disappear and the "cellular Network Not found" Error pops out.i have searched for it but i am not able to find any solution.can any body know whats the solution for this Problem. i have installed a custom rom from here and with the base band update.my signal strength becomes strong but that problem is not letting me call .Thanks
mehtab237 said:
Hi Guys i have a problem in my lenovo A7000 ,it was working fine but from few days i am not able to make any call because when i dial a number the network signal disappear and the "cellular Network Not found" Error pops out.i have searched for it but i am not able to find any solution.can any body know whats the solution for this Problem. i have installed a custom rom from here and with the base band update.my signal strength becomes strong but that problem is not letting me call .Thanks
Click to expand...
Click to collapse
You can try and flash another ROM to see if it's the roms problem, or do another clean (by wiping system,dalvik-cache,cache and data ofcourse) install of your current ROM. :good:
Ray_Green said:
You can try and flash another ROM to see if it's the roms problem, or do another clean (by wiping system,dalvik-cache,cache and data ofcourse) install of your current ROM. :good:
Click to expand...
Click to collapse
when the problem occur i was using stock ROM the somebody suggested to use the custom ROM.i don't think the problem is in the ROM.
mehtab237 said:
when the problem occur i was using stock ROM the somebody suggested to use the custom ROM.i don't think the problem is in the ROM.
Click to expand...
Click to collapse
It could be the problem of your Sim network provider. Have you tested it out with other sim providers and see if you can place calls!?
Well in my case it somewhat worked with
*#*#4636#*#*
and then i select the GSM (PRL) and of the radio signal
now its working fine
now i want to know by switching of that radio signal will there be any other problem?