Database Develop

[Q] Very bad SGS

Hi all experts.
I have an SGS with a problem.
It FC a lot of programs (maps, market, swype etc.) and it wont delete apps.
Tried flash 127 times at least but no luck.
Tried 2.2.1, 2.3.3, 2.3.6 no go.
Can´t write to int.sd so all have do be done trough Odin.
Formated all I could with speedmod, but a lot of the old crap just wont go away!
It´s sems there is an area in the mem that I can´t acces even if I´m root.
Any help? Or is it off to the store for a new phone.
Tex

The only thing that I can suggest is to do a full factory reset, reflash with the correct official firmware for your region, then factory reset again.
Even if you decide to return your phone you will need to restore it to your current official firmware.

Been there, done that No go
No warrinty left, so it´s a new phone.

Have you formatted your internal sd card?
Also perhaps flash through Odin using a stock rom & pit 512 & repartition checked

Sad to say: Been there, done that, no go
When connected to PC, I can se the files in explorer (phone and PC)
But if I try to put a file from PC to the phone, the next time I check the explorer on the phone, it says no int. SD card.

last thing to try would be to format internal sd from your pc.
try copying everything on it onto your pc first & then format.
otherwise hopefully someone else has some help for you.

*2767*3855# try this formatting method also via dialer...

Sad to say again: Been there, done that, no go
It says its formating and wiping, but after reboot it´s the same
So I guess it´s goodbuy SGS and hello SGS 2 (maybe)
Thanks for all answers and help.

it's likely that the internal SD-card got corrupted.

Just flash a stock rom from ODIN not cwm or use one of @ramad rom's (only to be flashed in PDA) or darky's rom or ezbase from insanity thread.

Unfortunately the setup wizard has stopped

i installed the NAA kernal and CM9, and all going great, i did however realise that i needed to install gaaps, so i placed on card, rebooted into recovery and installed, all going good, and then after bootup where you tap the android man to continue. this is what i get 'UNFORTUNATELY THE SETUP WIZARD HAS STOPPED'..
I cannot bypass this. ive tried installing two different gapps on it, and both times this..
any help would be appreciated

russy23 said:
i installed the NAA kernal and CM9, and all going great, i did however realise that i needed to install gaaps, so i placed on card, rebooted into recovery and installed, all going good, and then after bootup where you tap the android man to continue. this is what i get 'UNFORTUNATELY THE SETUP WIZARD HAS STOPPED'..
I cannot bypass this. ive tried installing two different gapps on it, and both times this..
any help would be appreciated
Click to expand...
Click to collapse
woow
what do you mean with stop??
maybe you try it again
flash the kernel
backup
factory reset etc
Flash ROM
Flash gaaps
done!

try to clear dalvik cache from cwm -> advanced

Hello guys!
I'm new to the forum, and a total noob when it comes to android. I have a VERY similar problemToday I installed the latest version of CM. Worked fine. I installed gapps. Now when I turn on the device, it just shoes the message and I can't do anything. I wanted to try reflashing a newer version of gapps, but I can't put it on my sd card, because my computer won't detect it anymore...I can't use my phone at all, I am starting to panic :/

cassiopee5 said:
Hello guys!
I'm new to the forum, and a total noob when it comes to android. I have a VERY similar problemToday I installed the latest version of CM. Worked fine. I installed gapps. Now when I turn on the device, it just shoes the message and I can't do anything. I wanted to try reflashing a newer version of gapps, but I can't put it on my sd card, because my computer won't detect it anymore...I can't use my phone at all, I am starting to panic :/
Click to expand...
Click to collapse
Get a card reader
wanna thank xda? here

unzip the rom with winrar you leave two folders that enters the system says and go to the folder that says-app-here clears-app-setup wizard again after that compress the two files that were decompressed - metainf--system-with-winrar-do not forget to put format .zip and you have the zip file to your sd put it, install it normally..
Unfortunately the message has stopped the setup wizard should no longer appear
sorry my bad English

Wizardloop
yeah i got almost the same problem but with few key differences:
i pimped up my android with pimp my rom, the system ui stopped unexpectetly and when i factory reset my phone i got stuck in so-called
wizardloop. so now i want to re-download my stock rom but i dont know any tools that helps me.kdz is for lg only and flashtool is for xperia.
i have prestigio 4055 usb driver.
so can anyone give me some advice? It will be highly appriciated.

maybe reflash kernel and after instal rom, maybe help to you problem.

Problem with P7320

Hello,
I have P7320. I've installed this ROM:
http://forum.xda-developers.com/showthread.php?t=2554877
I wanted to install Google Apps but I coudln't send files to my tablet. I wiped everything, restored etc. And I decided to format disc in Windows(this was stupid idea ever) and I stopped it after few minutes. No I can't do anything. Tablet doesn't start. I can go to CWM but I can't install ROM. I don't know what I should do now. Please help me

Odin the stock firmware for your device and pray it works.
Sent from my Nexus 5

[Q] help needed

to be honest have been using samsung ace 5830 for more than 2 years but didnt face any issue before.
my friend had installed CWM and rooted the phone also.
but now it keeps restarting and i am unable to do anything.
kindly suggest what needs to be done in details.
also the above installation was done 1 year back .
so please let me know what all is needed to install or guide me for the same.
since my friend has gone abroad i cannot get much help from him.

brainstorm5 said:
to be honest have been using samsung ace 5830 for more than 2 years but didnt face any issue before.
my friend had installed CWM and rooted the phone also.
but now it keeps restarting and i am unable to do anything.
kindly suggest what needs to be done in details.
also the above installation was done 1 year back .
so please let me know what all is needed to install or guide me for the same.
since my friend has gone abroad i cannot get much help from him.
Click to expand...
Click to collapse
What Do you mean by "keeps restarting" Bro, Is it stuck on the bootanimation?

If your phone doesn't get pass boot animation and reboots, then there's only one way to fix it. Your personal files and data would be gone but I'm sure it's backed up with your google account. Watch this and follow the instructions. Installing a stock firmware using ODIN. Hope it helped

brainstorm5 said:
to be honest have been using samsung ace 5830 for more than 2 years but didnt face any issue before.
my friend had installed CWM and rooted the phone also.
but now it keeps restarting and i am unable to do anything.
kindly suggest what needs to be done in details.
also the above installation was done 1 year back .
so please let me know what all is needed to install or guide me for the same.
since my friend has gone abroad i cannot get much help from him.
Click to expand...
Click to collapse
Are you currently using a stock rom or a custom rom? Anyway you can solve this problem by just flashing back the stock rom using odin. Here is the link on how to install stock rom using odin along with all firmwares and drivers (check the "Preparations" section),
Flash stock rom on Samsung Galaxy Ace S5830 using odin
If your PC cannot recognize the phone, its usually the drivers. Once installed, go to recovery mode (hold power+ Home button) and do a wipe data/ factory reset & wipe cache (otherwise bootloop might occur). Then restart. Now you have successfully flashed the stock rom. Here is the link for rooting and installing CWM 5 on Samsung Galaxy Ace. Just flash them from the recovery mode (choose "install zip from sdcard" and then select the zip file from sdcard).
How To Root and Unroot Samsung Galaxy Ace?
CWM 5.0.2.6 fix for Samsung Galaxy Ace S5830
Hope I Helped

more details needed
i think so i havent given proper details since i dont know the details ...
details as per what i know...
cwm is installed (some 4.X) and phone is rooted
have apocalypse at start .... dont know what is it .. or what is it termed as ..
more over phone keeps restarting is like ... when i try to lock it ... instead of locking it keeps restarting ...
once restarted it waits thr and then when i again try to lock it .. it restarts
just now cleared all the data and cache partition .. but m tired of apocalypse or need to install it
so please tell me what is apocalypse and cwm
after installing the zip file i need no softwares in my phone since internal memory is damn bad in this phone.
dont wanna change the phone since its the 1st phone i took with my own salary ..
sorry to trouble you guys .. but i am clueless about my own phone
forgot to mention .. any application after a while force closes .. m tired of the phone but dont wanna replace it

brainstorm5 said:
i think so i havent given proper details since i dont know the details ...
details as per what i know...
cwm is installed (some 4.X) and phone is rooted
have apocalypse at start .... dont know what is it .. or what is it termed as ..
more over phone keeps restarting is like ... when i try to lock it ... instead of locking it keeps restarting ...
once restarted it waits thr and then when i again try to lock it .. it restarts
just now cleared all the data and cache partition .. but m tired of apocalypse or need to install it
so please tell me what is apocalypse and cwm
after installing the zip file i need no softwares in my phone since internal memory is damn bad in this phone.
dont wanna change the phone since its the 1st phone i took with my own salary ..
sorry to trouble you guys .. but i am clueless about my own phone
forgot to mention .. any application after a while force closes .. m tired of the phone but dont wanna replace it
Click to expand...
Click to collapse
The Apocalypse you are referring to is the custom rom that is installed in your phone. When you bought you phone, you had Samsung's version of Froyo/ Gingerbread installed in your phone. That rom is called stock rom. Custom roms are build by developers using cyanogen mod sources. Now you keep having restarts and since clearing data and cache from CWM didn't solve it, I suggest you install another rom. Now this is where you have to make a choice. You can either install a stock rom (stable, nice battery backup, etc) or a custom rom (fast, performance oriented, customizable, etc). Before you do install another rom, backup all app data using Titanium Backup. If you choose Stock rom, then follow my previous post on how to install stock rom on your phone. Now if you choose custom rom, then first we need to update CWM 4 to CWM 5.
CWM 5.0.2.6 fix for Samsung Galaxy Ace S5830
Download the CWM 5 zip file to SD Card and reboot your phone to recovery mode (Power off then hold Home+ Power button). Now choose "Install zip from SD Card" and choose the zip file. Done! You have successfully installed CWM 5. Now time for you to install a new custom rom. Refer the following guide for all the custom roms for our device,
Know your Device:Galaxy Ace GT-S5830 ~Root~Odin~CWM~ROM LIST
For time being use any Gingerbread roms. Download it to SD Card and then reboot to recovery mode. Now choose Wipe data/ factory reset, Wipe cache partitions, Advanced> Wipe dalvik cache, Wipe battery stats, Mounts & Storage> Format /system. Now select "Install zip from SD Card" and choose your rom zip file. Reboot and you can use your new rom. Whenever you want to install any new custom rom, just follow the same procedure. Now as for the low internal memory problem, we might have a solution. But the catch is it requires a rom with init.d support (something all custom roms have and stock roms doesn't ) and an ext partition on SD Card. First backup all the SD Card data. Now go to CWM> Advanced> Partition SD Card> Size (Max 1GB, anymore and system will lag)> Swap (0MB) and wait for it to say "Partitioning done". Now download and place CronMod script (try INT2EXT+ as it is the most stable of all) to SD Card. Now again go to CWM> Mounts & Storage> Mount /system then flash the Cronmod zip from CWM. Reboot and you are good to go. Now go to Settings>Storage to see the newly increased internal memory. Here is the link,
CronMod-INT2EXT
Hope I Helped

Wrong section mates!!
First of all, read the forum rules in order to post your questions correctly...
There's a great Q&A Thread please use it to ask for help, this the General Thread, we must all contribute to maintaining our forum in order.
Next time, post it in the correct section, thank you for understanding it
Follow @mahithm instructions to flash a fresh STOCK rom and the next tine DON'T USE CWM 4x, it's outdated, there are several recovery systems based on CWM 5x, they're the most stable for a daily usage and they're required to flash most of the custom roms

[Q] Can somebody please help with my n7000??

Hi ive posted about my n7000 before but didnt get much help.
I want to know am i stuck using gingerbread?
everytime i use anyother firmware/custom rom , my phone eventually freezes and causes random reboots.
doesnt matter if its stock, CM, MIUI, or anything. anything thats not gingerbread it eventually freezes on.
can someone please help me? i wanna run jellybean

On Sep 20th you wrote about "yeah the jellybean stock flashed successfully, the ics didnt. it failed during the FSFactory."
You bricked your device. After that you played with pit files (so obviously trying the workaround).
If you want to solve your problem replace your mainboard. Or be happy that GB still works.

Why does freeze/reboot. Is this a hardware situation or software, because if gb works... that sill doesnt explain anything.

i know it doesnt explain it, thats more so why im confused.
heres my step by step for all 3 firmwares gb/ics/& jb:
For Gingerbread:
i load a custom 16GB pit file in odin along with the 3 part stock gingerbread firmware
flash it, works perfectly no matter what i do afterwards
ICS/JB:
ive tried this 3 ways
1. i load the ics/jb firmware in odin
- flash it
allow for boot..
this works fine until i put in my information as far as my google account and when i go into the play store to download my past apps then it freezes and reboots.
2.i load the ics/jb firmware in odin again this time using a pit file (ive tried multiple pit files
- flash them both
-allowed for boot
same thing happens when i go into the play store to download my past apps then it freezes and reboots.
3. i tried 1 & 2 again but i boot into recovery mode and factory reset
after it boots it still does the same thing.
even on custom roms it happens the same.
---------- Post added at 02:11 PM ---------- Previous post was at 02:08 PM ----------
drulo222 said:
Why does freeze/reboot. Is this a hardware situation or software, because if gb works... that sill doesnt explain anything.
Click to expand...
Click to collapse
^^^^^^^^^^^^^^^^^ forgot to tag you

As far i can guess, the os installs corectly, but the data not? Well... these partitions are separated from each other. Like if we'd imagine windows on partition c, and program files goes on d:.
But that is not a reason why would gb install and work while jelly bean not (stock/cm).
Freeze when istalling apps only shows that the emmc is there active on those bytes? but on gb aint?
The pit files, as far as i remember, and did use them 1ooo times, allows for repartition entirely, not just where os installs.
Im currently on jb 4.2. I had all the versions, except cm gb. I had those issues, but to me was a hardware like thing. i can install apps but once in a full moon the whole os freezes still(1 frame, and only force reset from power button works). The only way i can install apps safely is by having a partition on exsdcard, link2sd does that, next use symbolic link with rootexplorer and move about 4 folders to sdext2 (root/data/sdext2).
First figure out if you can to see if data partition is alright (use root explorer). is your root/data/app folder empty? does freeze when checking maiils? or if you clear dalvik cache from cwm?