Related
hi everybody ! i have an optimus 2x and the usb mass storage don't work, when i transfer everything, the thing i transfer is corrupted, no music no video, nothing work. i've changed and i try a lot of roms like cyannogen, miui or 2.3 stock. the problem persist.
i have this problem with internal and external sd
soldatcc said:
hi everybody ! i have an optimus 2x and the usb mass storage don't work, when i transfer everything, the thing i transfer is corrupted, no music no video, nothing work. i've changed and i try a lot of roms like cyannogen, miui or 2.3 stock. the problem persist.
i have this problem with internal and external sd
Click to expand...
Click to collapse
Get a different cable and connect directly to a USB port on your motherboard, report back what happens.
i have tried it doesn't work
soldatcc said:
i have tried it doesn't work
Click to expand...
Click to collapse
The phone uses the same chip of flash-memory for it's internal storage as well as the internal sd-card, so it's very unlikely you have a bad flash-memory.
If you have indeed tried with different cables and different ports on different computers the only conclusion possible is that you have a defective device and should get it exchanged.
TrymHansen said:
The phone uses the same chip of flash-memory for it's internal storage as well as the internal sd-card, so it's very unlikely you have a bad flash-memory.
If you have indeed tried with different cables and different ports on different computers the only conclusion possible is that you have a defective device and should get it exchanged.
Click to expand...
Click to collapse
i don't understand what is my problem, yesterday usb work and today no.
soldatcc said:
i don't understand what is my problem, yesterday usb work and today no.
Click to expand...
Click to collapse
Well, what can I say, things don't last forever, in time everything breaks.
(Unless you have overclocked your phone or something...)
Get it exchanged.
TrymHansen said:
Well, what can I say, things don't last forever, in time everything breaks.
(Unless you have overclocked your phone or something...)
Get it exchanged.
Click to expand...
Click to collapse
yes before this problem i've installed vorkernel e-penn with overclock
soldatcc said:
yes before this problem i've installed vorkernel e-penn with overclock
Click to expand...
Click to collapse
A-ha. That could very well be the reason. (Either the overclock or the kernel or both.)
Try to run a completely stock kernel and see what happens when you transfer over USB then.
TrymHansen said:
A-ha. That could very well be the reason. (Either the overclock or the kernel or both.)
Try to run a completely stock kernel and see what happens when you transfer over USB then.
Click to expand...
Click to collapse
ok i'll try
i've try the problem persist
soldatcc said:
ok i'll try
i've try the problem persist
Click to expand...
Click to collapse
reinstall the drivers... the same happend to me after a windows update.
Just reinstall and it should be fixed
I'm experiencing the following: stock 10D and stock 20L USB Mass storage was fine.
I then installed CWM, wiped, then flashed Modaco fr19 after a full wipe.
When connected, I get two extra drive letters in Windows. Windows disk management sees both cards (internal and real sd) and shows correct sizes, however Windows believes both cards are unformatted.
I then rebooted into CWM, wipe, flash Gr4 with Modaco custom kernel.
Now I again get 2 drive letters, but Windows considers them empty cardreaders, so when I try to explore them, it tells me to insert a card. So somewhat the same but a little different.
I also asked this at the Modaco forum but found this thread here and perhaps you guys here have any suggestions.
From Cwm recovery I can mount the external sd just fine by the way.
Well, I have resolved this issue...
I went somewhere else, to another computer. Connected the phone, installed drivers there and I could access both cards.
After that, I went back to my own computer, connected the phone and it worked again.
Strange, but well, it works
Hi,
I've search thru the forums and tried several things, but haven't found a solution.
My problem is that I no longer can make a USB-connection to my O2X.
The only thing that works in the micro-usb is charging. What I tried:
- Smartflash (power-up without battery while holding vol-)
- NVFlash (power-up without battery while holding both vol-buttons)
- Ordinary USB-connection (flash-drive)
- Cleaned it for dust
All of this was done on different windows machins (WinXP and Win7), all USB-ports and different USB-cables (inlcuding one that I know has worked before). Windows don't even show me the device.
The reason why I want to flash is that I think the current baseband (that I flashed) is not the best for my phone. So I want to try another baseband.
Do any of you have a suggestion on how to fix my phone or is the hardware toasted?
Best regards
Anders
Unable to install stock rom
DEAR MEMBERS
please help me i am running cm7.2 in my o2x and want to go back to stock rom.
i have downloaded smartflash tool and stock rom fls and bin files and done the entire procedure as mentioned in the guide
but when i press start button it asks to install odm which is not mentioned in the steps.
when i press yes nothing happens when i press no nothing happens.
please help me to get back to stock rom or else i may void my warranty.
once before i installed the stock rom by the procedure and was successful but this time i am unable
First uninstall lg software and lg usb drivers then first install LGUnitedMobileDriver_S498MA21_WHQL_ML_Ver_2.1.exe then run the SmartFlashTool_P990.exe then remove battery plug device in while holding volume down - and them try.
komunistvb said:
First uninstall lg software and lg usb drivers then first install LGUnitedMobileDriver_S498MA21_WHQL_ML_Ver_2.1.exe then run the SmartFlashTool_P990.exe then remove battery plug device in while holding volume down - and them try.
Click to expand...
Click to collapse
Thanks for your suggestion, already tried this. The problem is that Windows don't even pickup on my O2X when plugged in. No new devices in the Device Manager shows up.
aziz.chamadia said:
DEAR MEMBERS
please help me i am running cm7.2 in my o2x and want to go back to stock rom.
i have downloaded smartflash tool and stock rom fls and bin files and done the entire procedure as mentioned in the guide
but when i press start button it asks to install odm which is not mentioned in the steps.
when i press yes nothing happens when i press no nothing happens.
please help me to get back to stock rom or else i may void my warranty.
once before i installed the stock rom by the procedure and was successful but this time i am unable
Click to expand...
Click to collapse
Please don't hijack my thread!
Aduck79 said:
Thanks for your suggestion, already tried this. The problem is that Windows don't even pickup on my O2X when plugged in. No new devices in the Device Manager shows up.
Click to expand...
Click to collapse
Try going to Hardware and Sound and then Devices and Printers in the Control Panel. Maybe it'll show there.
Aduck79
You may try in a virgin PC where no USB drivers have been installed. Best would be format PC reinstalll WIN OS and try NVFLASH or SMARTFLASH after installing LG USB drivers. I have also faced similar problems and solved them in different PCs either friends or office. I somehow feel LGs drivers are badly written and not very smooth functioning. In fact I (and many others) have bricked O2X trying to upgrade to official GB updates by using LG PC suite and drivers.
This is only my suggestion. I did not had to format my PC any point of time. Don't curse me if this fails. This is only one of the trials and errors.
Maybe I should try from a Linux live-cd to check if it's windows or the phone who's acting strangely.
Sent from my LG Optimus 2X
I got the exact same problem and after searching the net there are a lot of people having the same issue too.
Don't want to sound negative but the majority never got it to run again. For some it automagically started working again.
I got it to run only on Stock Froyo, no stock GB and no ICS with all the ICS Kernels available.
The thing which helped me on Froyo was: http://forum.xda-developers.com/showpost.php?p=28985033&postcount=5
Unfortunately CM9 has no secret menu.
I once had it recognized with Jarvis Kernel on Paranoidandroid for a second and had a hotreboot. Then never again.
I'm pretty sure the PC and the LG Drivers make no difference in this case, as I got 5 different PCs running different OS for testing and they never made a difference.
Aduck79 said:
Hi,
I've search thru the forums and tried several things, but haven't found a solution.
My problem is that I no longer can make a USB-connection to my O2X.
The only thing that works in the micro-usb is charging. What I tried:
- Smartflash (power-up without battery while holding vol-)
- NVFlash (power-up without battery while holding both vol-buttons)
- Ordinary USB-connection (flash-drive)
- Cleaned it for dust
All of this was done on different windows machins (WinXP and Win7), all USB-ports and different USB-cables (inlcuding one that I know has worked before). Windows don't even show me the device.
The reason why I want to flash is that I think the current baseband (that I flashed) is not the best for my phone. So I want to try another baseband.
Do any of you have a suggestion on how to fix my phone or is the hardware toasted?
Best regards
Anders
Click to expand...
Click to collapse
I'm afraid without any USB connection at all you are pretty much out of luck I'd say
kohos said:
I got the exact same problem and after searching the net there are a lot of people having the same issue too.
Don't want to sound negative but the majority never got it to run again. For some it automagically started working again.
I got it to run only on Stock Froyo, no stock GB and no ICS with all the ICS Kernels available.
The thing which helped me on Froyo was: http://forum.xda-developers.com/showpost.php?p=28985033&postcount=5
Unfortunately CM9 has no secret menu.
I once had it recognized with Jarvis Kernel on Paranoidandroid for a second and had a hotreboot. Then never again.
I'm pretty sure the PC and the LG Drivers make no difference in this case, as I got 5 different PCs running different OS for testing and they never made a difference.
Click to expand...
Click to collapse
Does the ROM has anything to do with Smartflash- and NVflash-modes? My guess is that they have nothing to do with each other. So my problem should persist even though I try different ROMs. Correct me if I'm wrong.
I'll look into the Froyo-topic you linked to.
Strange. Now it suddenly works again. I didn't do anything from the last time. That's odd.
I don't think that the ROM specifically has to do with the problem.
Stock Froyo just happened to be the only ROM where switching USB connection modes made the device seen in device manager on Windows. (Although it required manual .inf driver clickery.)
I'm sure missing USB connectivity affects people in NVFlash as well.
In my case I can't do **** ranging from USB mass storage when booted up, ADB or NVFlash when booting.
However restoring to the Froyo nandroid makes everything working for me again.
oh oh, it looks like the same issue that i had... No PC-connection (Win/Linux) recognized the mobile via USB. No Chance to get it back to work.
I flashed back to stock (very difficult without NVFlash...) and then send it back LG Service for repearing. After three weeks i got it back. They changed the hole mainboard so i got a new IMEI but USB works now again.
zeonit said:
oh oh, it looks like the same issue that i had... No PC-connection (Win/Linux) recognized the mobile via USB. No Chance to get it back to work.
I flashed back to stock (very difficult without NVFlash...) and then send it back LG Service for repearing. After three weeks i got it back. They changed the hole mainboard so i got a new IMEI but USB works now again.
Click to expand...
Click to collapse
Yeah. It stopped working after I booted a couple of times
And it was only semi working, it didn't want to go into Smartflash-mode, only NVFlash and Flash-drive.
@aduck79,
Did you already try tonyp's modded adb drivers?
http://forum.xda-developers.com/showthread.php?t=1752074
aragorn7 said:
@aduck79,
Did you already try tonyp's modded adb drivers?
http://forum.xda-developers.com/showthread.php?t=1752074
Click to expand...
Click to collapse
Nope, as I'm quite sure that it's not a matter of drivers.
Windows don't even detect the phone. So I think that the phone doesn't present itself.
Sent from my LG Optimus 2X
Since you already tried changing cables, computers, and even windows & Linux, and since it works on and off, You're right - it isn't the rom nor the drivers. it does sound like the hardware is messed up where the cable connects.
Any chance you can get it serviced? Hope your warranty covers it.
Sent from my LG-SU660 using xda premium
Same problem, no solution
Hi,
I seem to have the same sort of problem with my phone.
I used to be able to connect my phone to my computer just fine until I upgraded it to Gingerbread. Or that is at least the last time the USB connection seemed to work.
I have looked all over the internet now to find a solution to the problem but can't find one. Hope you guys could help me on this.
My phone is an LG optimus 2x P990 with a stock ROM gingerbread 2.3.4
LGE Version LGP990-V20r
Kernel version 2.6.32.9
I've tried so far:
- rebooting phone and pc
- factory reset phone
- Use other pc's => didn't work
- Connect a samsung phone to my pc with my LG cable => did work
- uninstall and reinstall all the necessary drivers
- mass storage mode on and off
- Installed android SDK and looked for adb devices, none shown
- phone doesn't show in the computers device manager either
Although when I do connect the phone it starts charging and if I go to the tethering settings it does recognize the fact that it is connected through USB.
So why can't I get my PC to recognize the phone.
I really need it cause I would like to root my phone to install a custom ROM.
I have tried rooting it with Gingerbreak as well, but that doens't seem to work either.
Thanks for the help
I just made a recovery.log in CWM:
http://pastebin.com/yJw6LEmf
It mentions something about USB in the bottom. Maybe it's a software issue after all?
Sent from my LG Optimus 2X
Hi there,
I need some help here..my p990 usb only charges when connect to pc or playstation 3. I know it isn't a driver problem because i have already tested other two p990 at my pc and both devices are recognized/usb work.
I've tried smartflash/nvflash but the device can't be recognized by windows..
So, can i assume the usb hardware is dead :crying:? any tip for fixing this matter ?
Thanks in advance,
Nardocf said:
Hi there,
I need some help here..my p990 usb only charges when connect to pc or playstation 3. I know it isn't a driver problem because i have already tested other two p990 at my pc and both devices are recognized/usb work.
I've tried smartflash/nvflash but the device can't be recognized by windows..
So, can i assume the usb hardware is dead :crying:? any tip for fixing this matter ?
Thanks in advance,
Click to expand...
Click to collapse
Maybe the issue is the cable mate.'......try to change it.
Hope it helps
O2X with Magical ROM and supersonic kernels from my buddies
Hm... Tell us something more about the ROM, baseband and everything you have now on it ?
SREEPRAJAY said:
Maybe the issue is the cable mate.'......try to change it.
Hope it helps
O2X with Magical ROM and supersonic kernels from my buddies
Click to expand...
Click to collapse
I already done this but the usb won't work and the same cable works with another p990. :crying:
torq1337 said:
Hm... Tell us something more about the ROM, baseband and everything you have now on it ?
Click to expand...
Click to collapse
At the moment with Gueste2X_GoodBye-2.0 + gestekrnl 2.1 without oc, baseband 0725.
Did you try to switch mode? From "mass storage" to "mtp"?
amagyar said:
Did you try to switch mode? From "mass storage" to "mtp"?
Click to expand...
Click to collapse
No. How can i try this?
go to Settings->Storage-> hit the menu button -> USB-Connection(PC) -> choose between the options.
Actually I'm having the same issue. But I'm really sure my USB port is broken.
The device just isn't recognizing that it is being plugged into something.
(And I tried everything anyone ever reccomended on the USB not working matter)
I just use a cardreader to put stuff on my SDcard. I just hope I never have to repair my device via NVFlash. That's impossible now.
Other than that it's not a big deal for non-devs
Iconoclasm said:
go to Settings->Storage-> hit the menu button -> USB-Connection(PC) -> choose between the options.
Actually I'm having the same issue. But I'm really sure my USB port is broken.
The device just isn't recognizing that it is being plugged into something.
(And I tried everything anyone ever reccomended on the USB not working matter)
I just use a cardreader to put stuff on my SDcard. I just hope I never have to repair my device via NVFlash. That's impossible now.
Other than that it's not a big deal for non-devs
Click to expand...
Click to collapse
Can't enter into this menu usb-connection(pc) when i press menu button nothing happens.. I think we are in the same boat because my phone can't be recognized in apx mode/ sw mode ..
Iconoclasm said:
go to Settings->Storage-> hit the menu button -> USB-Connection(PC) -> choose between the options.
Actually I'm having the same issue. But I'm really sure my USB port is broken.
The device just isn't recognizing that it is being plugged into something.
(And I tried everything anyone ever reccomended on the USB not working matter)
I just use a cardreader to put stuff on my SDcard. I just hope I never have to repair my device via NVFlash. That's impossible now.
Other than that it's not a big deal for non-devs
Click to expand...
Click to collapse
The same is happening with my p990 to. I can´t connect to pc with pc connection. To transfer data i use the card reader or with airdroid who it make with wifi.
Others users that had this problem they sent the phone in warranty and Lg have changed their mainboards. So if you have warranty go and solve your problem with your LG shop. It´s seems that is not any solution to solve this annoying problem with this bad hardware
Hello, same problem here. Well, "you need to send it to LG".. but there's one problem. I have MIUI and I can't flash back original ROM without nvflash. How to deal with it?
Try this: open LG update tool > options > "?recover (phone)? " > do by imei > enter serial and imei. LG update tool checks baseband for updates, for recovery idk, but I guess recovery cm only needs the numbers entered. Worth a try, and I'd like to know too.... Thanks Ferrum Master, you made me know about this function
SuperSkill said:
Try this: open LG update tool > options > "?recover (phone)? " > do by imei > enter serial and imei. LG update tool checks baseband for updates, for recovery idk, but I guess recovery cm only needs the numbers entered. Worth a try, and I'd like to know too.... Thanks Ferrum Master, you made me know about this function
Click to expand...
Click to collapse
well at mine don´t works. thank you very much for you solution.
I have the same problem. It's not possible to connect to the phone either by LG tool or as mass storage. I've tried different cables, computers and cleaning the connector in the phone without success. I'm running stock GB.
I would really like to root the phone to be able to flash CM10. Is there any way to do this without USB connection?
Edit: I've already tried NVFlash and SuperOneClick
I had the same problem last weeked and i manage to solve it, im busy right now but I promise i'll tell you how i solved it later today or tomorrow
Sent from my Optimus 2X using xda app-developers app
Nardocf said:
Hi there,
I need some help here..my p990 usb only charges when connect to pc or playstation 3. I know it isn't a driver problem because i have already tested other two p990 at my pc and both devices are recognized/usb work.
I've tried smartflash/nvflash but the device can't be recognized by windows..
So, can i assume the usb hardware is dead :crying:? any tip for fixing this matter ?
Thanks in advance,
Click to expand...
Click to collapse
Hey hello, I wrote yesterday and told you that I would teach you how to fix this bug, I'm almost done with the tutorial, I had to make all over again so I could tell you step by step, unfortunately, the fix I found is temporal, so, I'm trying one more thing to see if I can make it permanent, and also, i'm wating for Hulk to answer me where to post this fix, 'cuz you're not the only one with this problem, so I think would be better to create a thread with my solution, i'm sorry if I could not give you the instruccions today but I think later today or tomorrow hulk will tell me where to put it, as soon as I post the solution, I'll post here a link to the thread, just wait a bit more
greetings
I just posted my solution, you might want to give it a shot
Look here
http://forum.xda-developers.com/showthread.php?p=33870935#post33870935
So my tab 8.9 has been working flawlessly, with a bit of a anomaly and I factory reset to trying to install a new rom on it.
After a factory reset, I could not do the following:
Can`t install any new apps (The play store is nowhere to be found, only very old market is there which doesn`t work
Can`t update (Computer won`t recognize, yes installed and reinstalled kies, samsung drivers, etc none worked. Tried wifi, changing ip settings, all doesn`t work: It shows up as Modem and I can`t do anything with it)
Can`t add account (After resetting many times, it never asks me to add an account like it normally should, nor can I add them manually. No workaround that worked so far, tried adding via email adding, etc, on setting button add account does nothing)
Can`t flash (Odin, CWM both doesn`t work, Odin says not supported and CWM just crashes before it even starts, Can`t flash via PC as I cannot connect to it)
It CAN connect to wifi, run the old stock browser, and transfer apps apk via USB connect port I have. Thankfully it still works. I connect a thumb drive to the tab and transfer files that way.
So how can I fix this
I would just like to flash ICS of any version OR even just make it work normally via stock update.
On a side note, I`m not sure if all tab does this but mine when I`d try to connect to a wifi at a college, it`d show multiple wifi and won`t connect to any, while my laptop shows just one wifi.
bkrs0351 said:
So my tab 8.9 has been working flawlessly, with a bit of a anomaly and I factory reset to trying to install a new rom on it.
After a factory reset, I could not do the following:
Can`t install any new apps (The play store is nowhere to be found, only very old market is there which doesn`t work
Can`t update (Computer won`t recognize, yes installed and reinstalled kies, samsung drivers, etc none worked. Tried wifi, changing ip settings, all doesn`t work: It shows up as Modem and I can`t do anything with it)
Can`t add account (After resetting many times, it never asks me to add an account like it normally should, nor can I add them manually. No workaround that worked so far, tried adding via email adding, etc, on setting button add account does nothing)
Can`t flash (Odin, CWM both doesn`t work, Odin says not supported and CWM just crashes before it even starts, Can`t flash via PC as I cannot connect to it)
It CAN connect to wifi, run the old stock browser, and transfer apps apk via USB connect port I have. Thankfully it still works. I connect a thumb drive to the tab and transfer files that way.
So how can I fix this
I would just like to flash ICS of any version OR even just make it work normally via stock update.
On a side note, I`m not sure if all tab does this but mine when I`d try to connect to a wifi at a college, it`d show multiple wifi and won`t connect to any, while my laptop shows just one wifi.
Click to expand...
Click to collapse
you mentioned that your tab's model is SHW-M305W
so this probably why you can't install any ROM
ammmm you know what I actually installed a stock Samsung P7310 framework on my P7300 through odin
but couldn't install P7320's ROM cuz P7310 is closer to my tab in everything
my point is if you'd like, you should try different ROMs for different models
BUT BE CAREFUL THIS MIGHT BREAK YOUR DEVICE, I'M NOT RESPONSIBLE
have you tried to flash this ROM [ROM][ICS][STOCK][P7300/P7310][LQJ/LPV][Deodexed/Odexed] Final Build [14/1/14] D-Host
I'm suggesting it because it doesn't have model check before flashing, so you won't face status 7 while installing
omarainea said:
you mentioned that your tab's model is SHW-M305W
so this probably why you can't install any ROM
ammmm you know what I actually installed a stock Samsung P7310 framework on my P7300 through odin
but couldn't install P7320's ROM cuz P7310 is closer to my tab in everything
my point is if you'd like, you should try different ROMs for different models
BUT BE CAREFUL THIS MIGHT BREAK YOUR DEVICE, I'M NOT RESPONSIBLE
have you tried to flash this ROM [ROM][ICS][STOCK][P7300/P7310][LQJ/LPV][Deodexed/Odexed] Final Build [14/1/14] D-Host
I'm suggesting it because it doesn't have model check before flashing, so you won't face status 7 while installing
Click to expand...
Click to collapse
I see!!! Thanks for the best answer ever. Good to know someone knows about this.
I tried to flash that exact one but I couldn't even start because Odin or CWM or PC method doesn't seem to work.
I searched but I couldn't really find a way to flash via just factory reset or from a usb stick.
How could I flash? Odin says unsupported version, telling me to do something I forgot for half an hour and rom manager just crashes on start.
I'll do that as soon as I can find a way to actually flash just via factory reset perhaps.
bkrs0351 said:
I see!!! Thanks for the best answer ever. Good to know someone knows about this.
I tried to flash that exact one but I couldn't even start because Odin or CWM or PC method doesn't seem to work.
I searched but I couldn't really find a way to flash via just factory reset or from a usb stick.
How could I flash? Odin says unsupported version, telling me to do something I forgot for half an hour and rom manager just crashes on start.
I'll do that as soon as I can find a way to actually flash just via factory reset perhaps.
Click to expand...
Click to collapse
tell me what is your CWM version ??
did you update it lately ??
omarainea said:
tell me what is your CWM version ??
did you update it lately ??
Click to expand...
Click to collapse
Uhh, Well I just installed it via rooting and then downloading superuser apk and rom manager apk and then loading it on to USB stick
then I installed the app but it seemed to crash.
It was the latest version of the rom manager or what the quick google search showed me.
I'm starting to think that it must be this SHW model's fault that it's not responsive to any conventional method.
I really would try to flash some other way if you or anyone could tell me how, that'd be excellent because it seems the only methods of flashing new roms on it seems like Odin, CWM, PC.
Thank you as always for even remotely giving any attention at all. I greatly appreciate it and I'd do it for you.
bkrs0351 said:
Uhh, Well I just installed it via rooting and then downloading superuser apk and rom manager apk and then loading it on to USB stick
then I installed the app but it seemed to crash.
It was the latest version of the rom manager or what the quick google search showed me.
I'm starting to think that it must be this SHW model's fault that it's not responsive to any conventional method.
I really would try to flash some other way if you or anyone could tell me how, that'd be excellent because it seems the only methods of flashing new roms on it seems like Odin, CWM, PC.
Thank you as always for even remotely giving any attention at all. I greatly appreciate it and I'd do it for you.
Click to expand...
Click to collapse
so you didn't try to flash CWM recovery through odin yet !!!
why don't you try to flash THIS one and see
also it seams like you didn't try to flash CWM through your current CWM is that right?
omarainea said:
so you didn't try to flash CWM recovery through odin yet !!!
why don't you try to flash THIS one and see
also it seams like you didn't try to flash CWM through your current CWM is that right?
Click to expand...
Click to collapse
omg I'm so sorry for the late reply and I see that your account is disabled??
Hopefully I can get some response oh man.
I don't know any way to flash, if you could give me a way to flash these ones, I'll try them.
Odin says incompatible and rom manager crashes
If you could link me a way to flash somehow, I'll apply that method with your referred roms
Thanks a LOT
Hi everyone. i am new here!
I just used odin to get back to stock rom for my captivate, i had [4.2.2]Captivating(Xperia Themed)[RC2] rom installed before i installed stock rom
everything working fine right now but when i plug my usb into the phone to copy some files it just automatically turns off after 4-5 second and it stays turned off , and when i unplug usb, its automatically turns on again. even when i plug my phone charger, happening same thing. that means i can't even charge my phone! was searching this problem , there are some similar problems but not like this, could not find any solution yet.
- Tried 2 different usb cabels but same thing happening on both.
- I did not drop my phone or something like that.
- battery was working fine. except it loses energy pretty faster, like 1 day.
I installed stock rom because i wanted to fix my IMEI problem and then wanted to go back to Captivating xperia themed rom. now IMEI is fixed but how do i install rom if i can't even use my usb?
Please help!
Thanks.
Never mind. i fixed it by my self. looks like it was my stock rom causing that usb problem. i installed another rom by using "download mode" from odin. now my problem is fixed but my imei is still messed up. hope i will fix that soon too.
Jo0ey said:
Never mind. i fixed it by my self. looks like it was my stock rom causing that usb problem. i installed another rom by using "download mode" from odin. now my problem is fixed but my imei is still messed up. hope i will fix that soon too.
Click to expand...
Click to collapse
You'll have to flash stock 2.3 with Odin to fix your imei.
BWolf56 said:
You'll have to flash stock 2.3 with Odin to fix your imei.
Click to expand...
Click to collapse
Yeah i know, that's what i did because of imei but then this problem started what i mentioned. so i went to costom rom again and phone does not reboot anymore but yea imei is still messed up, but i can still receive calls and messages, but "antenna" is on very low, like 1 or 2 lines.
Jo0ey said:
Yeah i know, that's what i did because of imei but then this problem started what i mentioned. so i went to costom rom again and phone does not reboot anymore but yea imei is still messed up, but i can still receive calls and messages, but "antenna" is on very low, like 1 or 2 lines.
Click to expand...
Click to collapse
That could be your modem, might need to flash another.
For your imei, try to flash another ROM from stock. Your phone obviously doesn't like the one you're using atm.
BWolf56 said:
That could be your modem, might need to flash another.
For your imei, try to flash another ROM from stock. Your phone obviously doesn't like the one you're using atm.
Click to expand...
Click to collapse
what do you mean modem?
- yeah looks like my phone really does not like custom roms , but i don't like stock rom , so ..
the worst thing is that none of guide worked for me to change imei. i even flashed imei changer as zip.
i will fkin fix this anyway!
Use this Odin One Click (I897UCKJ3_withBL)
Jo0ey said:
what do you mean modem?
- yeah looks like my phone really does not like custom roms , but i don't like stock rom , so ..
the worst thing is that none of guide worked for me to change imei. i even flashed imei changer as zip.
i will fkin fix this anyway!
Click to expand...
Click to collapse
IT is in the android development thread
Cause It helps me every time when my imei is messed up.
Report Back
Jo0ey said:
what do you mean modem?
- yeah looks like my phone really does not like custom roms , but i don't like stock rom , so ..
the worst thing is that none of guide worked for me to change imei. i even flashed imei changer as zip.
i will fkin fix this anyway!
Click to expand...
Click to collapse
Modem is the radio. Just like a kernel, you can flash another that could work better in your area.