Database Develop

can't use data after install??

Im a newbie here so bare with me. I follwed a tutorial from crobs808 easy step by step to intall android on my vogue to the T , i even used the suggested build on the tutorial.
I was able to make it work and installed everything ok on my device, but my problem now is that i can no longer go online or use my data. I don't know why but i can't surf the web, go on youtube, market, etc. The phone only makes/receives calls and text. My other problem is that when i connect the phone to the usb my pc does not recognize it. Any suggestions? by the way i wanted to switch to the 2.1 build from incubus26j
Thanks for the help.

luvtorev said:
Im a newbie here so bare with me. I follwed a tutorial from crobs808 easy step by step to intall android on my vogue to the T , i even used the suggested build on the tutorial.
I was able to make it work and installed everything ok on my device, but my problem now is that i can no longer go online or use my data. I don't know why but i can't surf the web, go on youtube, market, etc. The phone only makes/receives calls and text. My other problem is that when i connect the phone to the usb my pc does not recognize it. Any suggestions? by the way i wanted to switch to the 2.1 build from incubus26j
Thanks for the help.
Click to expand...
Click to collapse
check the modem app
and see if the connection went down
if not try a reboot

i have tried restarting the phone 10x already, took out the battery, soft reset and still nothing. I'm actually able to connect to my pc now but still no luck with my data? and how can i switch to the 2.1 build?

luvtorev said:
i have tried restarting the phone 10x already, took out the battery, soft reset and still nothing. I'm actually able to connect to my pc now but still no luck with my data? and how can i switch to the 2.1 build?
Click to expand...
Click to collapse
did u take a look at the app called modem?
i comes pre installed
also if you installed to nand
just follow the same procedure

ok, i was able to put in the 2.1 build in. All went fine...im going to wait and see if i can use data but if not any suggestions??

Try reinstalling or even re-flashing the .nbh file?

i did not flash anything exept that one time to unlock the phone. The first and now second time intalling these builds i did not flash anything. The tutorial says nothing about flashing anything....am i wrong? If so, how do i do it? and how/when do you flash nbh?
and i did check the modem app and it says its connected.....but still no data

everything works except data.....anyone?? Thanks

Hm..i have work internet, but market & Gmail doesn't work. Why? Modem App work well,i see my ip, at browser internet work.

[Q] X8 after rooting & factory reset, stuck on "desktop"

So I got myself into really funny situation I'm stuck.
I worked with xperia mini pro everything was fine.
Now I got x8 well older one... And all i did was rooted it with flashtool.
Everything was working fine from that point with root rights like root uninstaller (I just tested didn't deleted anything).
And then I made "factory reset" Deletes everything from sd card and bla bla bla well you guys know what i mean.
After that I wanted to install kernel but it's not that easy. So I first read alot and did not do that. Since it would require bootloader unlock and thats pain with 11W29.
So just after factory rest somehow I bricked my phone...
But it's interesting brick... VERY INTERESTING.
It turns on, it has flash mode. I can update it via update setup and tried to do that.
Nothing helps all I get is :
phone loading normally, then there is no menu, not sony ericsson home, not go launcher, no settings available no nothing...
To explain my problem i will upload screenshot.
And I can't flash it now since it's not bootloader unlocked.
And I can't access anything from phone.
This is what you call hard brick?

Hard brick is when You can't turn on phone, so there isn't any way to install ROM again. In Your case it's strange soft brick, cause it looks like ther isn't any launcher If You can enter into flash mode than You should reinstall stock ROM and kernel using flashtool (with version 0.2.9.1 cause it's more stable with older devices, such as x8).

Its not bricked. / You can use android commander to push recovery.

It's stock already and I tried stock launcher via updatesetup of SE,
And I think i need bootloader unlock to flash it ? or I'm wrong.
And Later on i will try with older version of flashtools
thx for answers guys.

No, unlocked bootloader allows You to install custom kernels, but some ROMs works also with stock SE kernel, so You don't have to unlock bootloader to install custom ROM or back to stock ROM

So i'm back again on same problem....
I have a Question if you wanna flash phone from flashmode u don't have to have unknown sources and debugging turned on.
Since i can't do that...
My following actions :
I will try to install fresh win7 32bit, since now i'm on 64 and on this system i was working with mini pro xperia, so maybe that may be the case...
I'll try to flash it with older version of flashtools 0.2.9.1 I guess if i remember it right (but on this windows OS It gives me : Error Flashing. aborted)
And I installed flashtools drivers and everything i'm 100% sure of that.
What I tried :
I also tried flashing it from Linux / ubuntu . same as with windows i get :
Error flashing. Aborted.
PCC gives me error when i try to repair it.
Update Service Dose everything as normal but same problem remains I don't get launcher or something just that empty desktop
And I would love you guys if you would give me few links to stock firmware of
x8 11W29 / E15i
And if you have something else to suggest please help me ;D

Hello, sorry for necroing thread but i have exactly same problem like OP, and as he didnt post solution i would like to ask how to do it.
Thanks for your time!

X8 OFW
deamerz said:
Hello, sorry for necroing thread but i have exactly same problem like OP, and as he didnt post solution i would like to ask how to do it.
Thanks for your time!
Click to expand...
Click to collapse
Try Flashing This via FlashTool.

TheScriptKitty said:
Try Flashing
Click to expand...
Click to collapse
Hello and thanks for your reply. I tried flashing my x8 with provded ftf file and the problem still remains the same. If it is any help i can normally increase volume, access emergency calls and keyboard and other things. But the screen remains blue. And i also remember that the thing which is supposed to appear here is the language setup, if there is any way to set up main language outside android system i guess that could help.
Again thanks for your reply and your time!

deamerz said:
Hello and thanks for your reply. I tried flashing my x8 with provded ftf file and the problem still remains the same. If it is any help i can normally increase volume, access emergency calls and keyboard and other things. But the screen remains blue. And i also remember that the thing which is supposed to appear here is the language setup, if there is any way to set up main language outside android system i guess that could help.
Again thanks for your reply and your time!
Click to expand...
Click to collapse
Try Flashing a Costume ROM for stock kernel via Recovery.
Here is a list of ROMs. Just make sure you download one that says (Stock).

[Q] Samsung Galaxy Note not connecting to Kies, in Recovery Mode

Hi,
Yesterday, I was trying to upgrade from 2.3.6 to ICS via Kies.
The upgrade got stuck at 45% and I had to disconnect the cord, as I had a flight to catch
Now the phone shows an error "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again."
When i connect the phone via the cabe, to the computer, using Kies, it gives me error saying "Device not responding. To resolve the issue, reboot the device."
This is how I tried to resolve the issue, but with no success..
I have rebooted a number of times without success
I clicked on 'Troubleshoot connection error' and reinstalled the driver multiple times, but without any success
What options do I have?
Best regards,
Pavan Kota

pavankota said:
Hi,
Yesterday, I was trying to upgrade from 2.3.6 to ICS via Kies.
The upgrade got stuck at 45% and I had to disconnect the cord, as I had a flight to catch
Now the phone shows an error "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again."
When i connect the phone via the cabe, to the computer, using Kies, it gives me error saying "Device not responding. To resolve the issue, reboot the device."
This is how I tried to resolve the issue, but with no success..
I have rebooted a number of times without success
I clicked on 'Troubleshoot connection error' and reinstalled the driver multiple times, but without any success
What options do I have?
Best regards,
Pavan Kota
Click to expand...
Click to collapse
You have two option:
1.Take your phone to service centre and say them "I was updating the phone with kies but at 45% it said some error and I have to disconnect the cable and nowit shows me *place holder* error"But dont say them you pluged the cable out during upgrade.
2.flash a stock rom with pc odin.

Just flash stock ics via pc odin. Its quite simple diy fix
Sent from my GT-N7000 using XDA

vijai2011 said:
You have two option:
1.Take your phone to service centre and say them "I was updating the phone with kies but at 45% it said some error and I have to disconnect the cable and nowit shows me *place holder* error"But dont say them you pluged the cable out during upgrade.
2.flash a stock rom with pc odin.
Click to expand...
Click to collapse
Hi @vijai2011. Thanks for your thoughts..
I would prefer not doing both, if possible. Hoping for some solution..
Quick questions:
If I flash a stock rom with pc odin, will I loose my stored pictures / videos? I did not take a backup. Am cursing myself for that right now.
Where do i get the stock rom for flashing, along with the procedure? I assume a 'stock rom' would mean an official rom.
Can i use the 'stock rom' for ICS directly or do i need to go back to 2.3.6?

pavankota said:
Hi @vijai2011. Thanks for your thoughts..
I would prefer not doing both, if possible. Hoping some a solution..
Two quick questions:
If I flash a stock rom with pc odin, will I loose my stored pictures / videos? I did not take a backup. Am cursing myself for that right now.
Where do i get the stock rom for flashing, along with the procedure? I assume a 'stock rom' would mean an official rom.
Can i use the 'stock rom' for ICS directly or do i need to go back to 2.3.6?
Click to expand...
Click to collapse
1.No you wont.Only phone contacts(not the contacts in sim),apps,messages are removed.Files on sd card is intact.
2.Stoch rom along with procedure here.Follow 1.b alone in the thread if you donot need root.Yes stock rom means official rom.
3.You can flash directly.

Dear @vijai2011,
Thanks for the post. I will try the ICS Stock Rom Flash if nothing else works..
Would like to see if there is something I can do, to be able to get Kies to recognize the phone right now..
Will keep you posted..

pavankota said:
Dear @vijai2011,
Thanks for the post. I will try the ICS Stock Rom Flash if nothing else works..
Would like to see if there is something I can do, to be able to get Kies to recognize the phone right now..
Will keep you posted..
Click to expand...
Click to collapse
I would suggest you,you never use kies for update .use it only to take backup and restore.Just flash the rom with link and kies will detect the phone.

vijai2011 said:
I would suggest you,you never use kies for update .use it only to take backup and restore.Just flash the rom with link and kies will detect the phone.
Click to expand...
Click to collapse
I like the confidence in your answer, about KIES. What fun! Will keep that in mind for the future

pavankota said:
I like the confidence in your answer, about KIES. What fun! Will keep that in mind for the future
Click to expand...
Click to collapse
kies is always S$#@.If you need to update,use ota.

Solved: Got a new USB Cable
Finally resolved this issue without flashing a stock ROM.
After trying out everything, I got a doubt about the USB cable and got a new official Samsung cable.. and voila.. the Kies software detected the emergency recovery and proceeded.
Now the emergency recovery file from Samsung is over 1GB in size, and stops in between if the internet connection breaks. So ensure you have enough space, good bandwidth and proper monitoring, so you can restart in case it breaks.
And finally the ICS is now installed on my phone.. It looks very neat and sleak!
The patience paid off..

Depend on KIES Only for Upgrades
vijai2011 said:
kies is always S$#@.If you need to update,use ota.
Click to expand...
Click to collapse
After my current experience, I would always recommend KIES to everyone.
It is a great software and I think it gets blamed unnecessarily because of completely unrelated issues.

pavankota said:
After my current experience, I would always recommend KIES to everyone.
It is a great software and I think it gets blamed unnecessarily because of completely unrelated issues.
Click to expand...
Click to collapse
Nope.Kies is ofcourse a [email protected]*& when it comes to software update.Even I wont go for OTA.I always use odin for software update
But When compared to kies,OTA is better.

hey all,
i've had the same issue right here with my friends' note 1. i've tried to use odin to flash stock jb but failed..

SGS GT-i9000 fozen on the first boot screen (Galaxy S GT-i9000 SCREEN)

I own a Galaxy S GT-i9000( bought at SFR)
When I connect it to computer I get the prompt that tells to choose between Storage, Kies...
But whatever I choose the computer tells me USB Device not recognised.
Now I was stupid enough to do the following:
I managed to root using Z4root by copying the APK file on external sd .
I got rom manager and updated my recovery.
I updated using the CM10-unofficial rom that is in the development forum: http://forum.xda-developers.com/showthread.php?t=1775169
The Mobile Network was not working so I did the following
I restored the nand that i did in recovery and now the phone is frozen on the first boot screen (Galaxy S GT-i9000 SCREEN)
Now I can go to Download mode but I can't go to recovery mode.
Let me remind you that my USB data connection is not working. So even though I enter into the Download mode I am not able to use Odin. If you know somthing that I am not doing, let me know.
So now I am looking for a solution that would permit me to flash without USB or allow me to go to recovery mode. Or a tutorial on how to change the usb port myself.
Thanks in advance.

kigordid said:
So now I am looking for a solution that would permit me to flash without USB or allow me to go to recovery mode. Or a tutorial on how to change the usb port myself. Thanks in advance.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=29464733&postcount=10

You can try using Mobile Odin.
Also, you can try Heimdall method: https://www.fixmystuff.in/FMS_Forum...-flashing-to-original-rom-using-heimdall.126/

Hey
have you tried to connect it in Download mode??

Need more solutions
Thanks again to all of you that have answered me so fast.
Well I just finished trying all that you suggested.
unfortunately am still at the same point. Whatever I do, whatever drivers am putting in, cleaning inside the USB port with methylated spirit... Not getting Odin or Kies to detect it.
I read somewhere that when the data connection works, I should see the device named Samsung Device even before installing the drivers, but all I am getting is Unknown device. I still went ahead uninstalling and installing the drivers you provided and there is no successful outcome so far.
I still have faith. I have a little knowledge in electronics. I can open my phone and get to the usb port. My problem is I don't get any tutorial on how to replace the usb port. The thing is the connections are very tiny. I can also do with a bypass way that could make me install a 2nd usb port temporarily just long enough to flash the phone.
Or a hardware solution if I have to remove and flash a specific IC in a certain manner.
Thank you in advance.

help
hi there,
after doing alot of stuff to your phone that wasnt nessacary i'm not surprised it doesnt work er sorry . the only thing i can think of is the following whenever i have a problem with windows i go to linux, which is faster , much more efficient . so i suggest that you install linux ( ubuntu the best ) and try using odin with the linux version, it often detects things that windows doesnt see. other than that sorry cant think of anything else .
see ya

Trying it
thesmegger said:
hi there,
so i suggest that you install linux ( ubuntu the best ) and try using odin with the linux version, it often detects things that windows doesnt see.
see ya
Click to expand...
Click to collapse
Thank you.
Am going to boot on linux right away. I will let you know.

Back to zero
kigordid said:
Thank you.
Am going to boot on linux right away. I will let you know.
Click to expand...
Click to collapse
It doesn't change anything.
Am back to my start point.
Thank you though.

Anything Else?
Does anyone have something else to suggest or I should consider my phone dead?
Look like a quite number of people are having this same issue and haven't got over it.
I just hang on and appeal to all of you cos I know XDA is the best place where I can get a solution.
Lemme know any suggestion... even the ones you are not sure can help. Am willing to do anything.
Thanks again all of you.

hi
hi there
if all else fails there is a jig
http://forum.xda-developers.com/showthread.php?t=1402286
this forces your phone into download mode and will help for sofy bricks so look it up on the link and try that , sometimes on local forums like we have in france members will comme over and lend you one , or just buy one eyc .
hope that helped
see ya :good:

Uninstall from PC Kies, instal samsung drivers, then download and flash mod 2.3.4 xxjvp stock? / Or other, 3.PDA, PHONE, CSC / pit is 512 and re-partition and start to turn in Odin.

[q] pleaseee help meee.... Lost my mind

Ok i will explain clearly
what i did...
Firstly i tried to follow all videos to root custom my galaxy gear when the first hour when i bought,
i was succesfull. I installed null 23 i root it and then i upload null 23 in my sd card part in my gear with the wondershare mobile go application.
Then i didnt like it and i tried to unroot my gear. And i followed the steps correctly. But..
Activation screen which is connecting with nfc or bluetooth, never let me pass. Even i tried to do nfc, it says try to bluetooth and bluetootg couldnt connect. But they see eachother
and also when i try to root again, odi says success but nothing happening on my screen after i root it.
And now wondershare doesnt work because i am not able to reach usb debug mode settings on my gear. Because i couldnt pass connection screen on gear.
Now i really f....d up
please help me almost 20 times i tried to root and unroot.
I just want my gear as like as first minute of my device.
Please help me asap
thanks...

Try flash stock rom via odin and start again

i tried many times... i found the file name is V700XXUBNA6_V700OXABNA6_HOME.tar
Brendo said:
Try flash stock rom via odin and start again
Click to expand...
Click to collapse

tried hundred times (
i downloaded UK stock rom tried. and nothing happened. like just i restart the device.
it doesnt effect anything
i tried to XAR version
again it is coming the same screen which is connect the bluetooth
but it is unsuccesfull
MAIN PROBLEM IS
THE DEVICE DOESNT ACCEPT THE ROMS
JUST KEEPING THE SAME THING INSIDE.

http://forum.xda-developers.com/showpost.php?p=48323895&postcount=2
Also try clearing cache and data for gear manager, uninstall, reboot, reinstall