[Q] About baseband - LG Optimus 2x

Hi guys, when I use NVflash to flash ROM, NVflash will also flash the Baseband or I will do it seperately ?

kennguy said:
Hi guys, when I use NVflash to flash ROM, NVflash will also flash the Baseband or I will do it seperately ?
Click to expand...
Click to collapse
No, it will not. You have to flash it separately using SmartFlash.

kt-Froggy said:
No, it will not. You have to flash it separately using SmartFlash.
Click to expand...
Click to collapse
Thanks...now I'm on DjangoManouche X 1.2 with baseband 30a, I flash baseband 30b but I got the error at the end of the flash (Disconnecting from the target). Any solutions ? :crying:

You could try smartflashing it with the AIO Toolkit here:
forum.xda-developers.com/showthread.php?t=2020737http://lg-phone-firmware.com/index.php?id_mod=3
Hope it helps!

Disconnect your phone and try it again that was also happen to me
Sent from my LG-P990 using Tapatalk 2

Related

Stock rom for NVFlash with baseband

Hi,
Does someone have a link to an ROM for NVFlash where the baseband is included, cause I have some problems with the baseband, and flashing the baseband through Smartflash doesn't solve them, so I just wanted to flash it through NVFlash, but the baseband wasn't included and so my problems were still there...
Thank you!
Fendria said:
Hi,
Does someone have a link to an ROM for NVFlash where the baseband is included, cause I have some problems with the baseband, and flashing the baseband through Smartflash doesn't solve them, so I just wanted to flash it through NVFlash, but the baseband wasn't included and so my problems were still there...
Thank you!
Click to expand...
Click to collapse
+1 for this
I like this also, plz!!!
Q: Does it gives anywhere a newer Version than V10b? This would be Greatful
anyone?
You can't flash baseband with nvflash. You need smartflash.
Sent from my p990 on ICS
i have spent 10 days to do it with smartflash and tried so many computers and laptops but no luck, thats why i am asking for nvflash and there is one available for G2X and it flashes baseband aswell on my phone but it is not fully compatible with p990
sturmtruppler said:
You can't flash baseband with nvflash. You need smartflash.
Sent from my p990 on ICS
Click to expand...
Click to collapse
gugman said:
i have spent 10 days to do it with smartflash and tried so many computers and laptops but no luck, thats why i am asking for nvflash and there is one available for G2X and it flashes baseband aswell on my phone but it is not fully compatible with p990
Click to expand...
Click to collapse
You cannot flash basebands on the P990 with nvflash, regardless of whether or not you can do it on other models. You have to use smartflash as already mentioned above
If you manage to flash baseband with nvflash or find someone who can I'll buy you a beer! :beer:
Sent from my p990 on ICS
No offence, but enough, nvflash ain't, and won't be, able to flash baseband. If you guys want to you're free to pm me. Explain in detail about your issues with smartflash and I will do what I can to help you
Sent from the new smoothly LGP990
What's the problem flashing it with smart flash it does it purpose anything special of NV flash??
Not sure, maybe use kdz method.
Sent from my Galaxy Nexus using xda app-developers app
sukhochir said:
Not sure, maybe use kdz method.
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
Yes, kdz method flash baseband also, and what's better, it do not wipe anything.
Sent from my LG-P990 using xda app-developers app

cant install any rom pls help!

my v28g just bricked and i wanted to install stock lg v30a but the clockwork recovery 6.0.1.5 always says error status 0 when trying to install v30a deodexed and on other version it restarts the clockworkmode plss help!
alinush95 said:
my v28g just bricked and i wanted to install stock lg v30a but the clockwork recovery 6.0.1.5 always says error status 0 when trying to install v30a deodexed and on other version it restarts the clockworkmode plss help!
Click to expand...
Click to collapse
Install the special recovery..don worry everything wil be alright..
Sent from my LG-P990 using xda app-developers app
you can also try to smartflash or NVFlash a stock-Rom, V20Q or V30A, if nothing else helps
Jishnu Sur said:
Install the special recovery..don worry everything wil be alright..
Sent from my LG-P990 using xda app-developers app
Click to expand...
Click to collapse
can you give me a link? i dont know which is the special recovery :S
alinush95 said:
can you give me a link? i dont know which is the special recovery :S
Click to expand...
Click to collapse
I don have the internet now..so sorry cant provide u the link..just search.for it in developer's section on the CM10 on ICS..
Sent from my LG-P990 using xda app-developers app
alinush95 said:
can you give me a link? i dont know which is the special recovery :S
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2058231
In the first post there is recovery.zip flash it with cwm and you will have the special recovey installed
http://forum.xda-developers.com/showthread.php?t=2020737
7 - SmartFlash a Stock ROM and/or BaseBand. Flash a full stock ROM (bin file) AND/OR Baseband (fls file) as I mention before. Hints:
For BaseBands information and downloads visit the detailed and helpful Complete Baseband overview thread by tonyp.
For official Stock ROMs (KDZ) visit this site

[Q] Need a NVFlash stock rom with baseband

Only NvFlash is working on my pc and im trying to repair a friends phone.
Now i did try serveral rom's but stil have problemen with baseband/imei number.
So can somebody help me?
LG software wil not work also Smartflash keeps crasing at 50%.
Kind regards.
I have only just baseband problem try to flash again
Sent from my LG-P990 using xda app-developers app
Notopic1 said:
Only NvFlash is working on my pc and im trying to repair a friends phone.
Now i did try serveral rom's but stil have problemen with baseband/imei number.
So can somebody help me?
LG software wil not work also Smartflash keeps crasing at 50%.
Kind regards.
Click to expand...
Click to collapse
Use the all in one tool kit....you can use the nvflash method....or try to search for Stefan or Topo ics ROM for this method directly
O2X with Magical ICS ROM and magnificent kernels from my buddies
Nvflash is no use if you want to change baseband. The only ways to change baseband are via smartflash or flashing a stock rom with LG's software.
What error are you getting with smartflash?
Sent from my LG-P990 using Tapatalk 2
kingvortex said:
Nvflash is no use if you want to change baseband. The only ways to change baseband are via smartflash or flashing a stock rom with LG's software.
What error are you getting with smartflash?
Sent from my LG-P990 using Tapatalk 2
Click to expand...
Click to collapse
I'm getting disconect error's.
Software is installed proper.
LG software connection lost..
So i only get NVFlash to work.
Nobody knows the answer?
I suggest you look this post ... http://forum.xda-developers.com/showthread.php?t=2003888
is from Homero, a master of my world ..and if you have any problem... he resolve it!
I work myself perfect and smooth! good luck!

[Q] How to install PARANDROID rom in LG Optimus Black (ku5900) korean version

Hi All,
Please tell me how to install PARANDROID rom 3.15 in lg optimus black ku5900.
The problem is my phone is korean version.
I have tried CM10 before, and installed successfully but IMEI gone .
So it is possible to install PARANDROID rom (p970) in ku5900.
If yes then please tell me the steps to do that..
Thanks in advance...
jrvariya said:
Hi All,
Please tell me how to install PARANDROID rom 3.15 in lg optimus black ku5900.
The problem is my phone is korean version.
I have tried CM10 before, and installed successfully but IMEI gone .
So it is possible to install PARANDROID rom (p970) in ku5900.
If yes then please tell me the steps to do that..
Thanks in advance...
Click to expand...
Click to collapse
Get v30j or v30i kdz. Extract and flash the cp file + patched v20 ap for p970.
Sent from my OptimusBlack using xda app-developers app
ouroboros12 said:
Get v30j or v30i kdz. Extract and flash the cp file + patched v20 ap for p970.
Sent from my OptimusBlack using xda app-developers app
Click to expand...
Click to collapse
Thanks..
I have installed V30I ICS version in lg ku5900 ,this OS is korean version , its running well..
Now my phone is rooted ,Rom manager installed and then i want to install/Flash clockwork recovery for P970 ,but is fails..
So can you know that how i can do that ?...
Thanks again...
jrvariya said:
Thanks..
I have installed V30I ICS version in lg ku5900 ,this OS is korean version , its running well..
Now my phone is rooted ,Rom manager installed and then i want to install/Flash clockwork recovery for P970 ,but is fails..
So can you know that how i can do that ?...
Thanks again...
Click to expand...
Click to collapse
Just flash cp.fls from v30i for baseband. Then flash v20 patched ap.bin. you could extract the .kdz of p970 automatically. And thres an option to flash cwm too. So thats it.
Sent from my OptimusBlack using xda app-developers app
ouroboros12 said:
Just flash cp.fls from v30i for baseband. Then flash v20 patched ap.bin. you could extract the .kdz of p970 automatically. And thres an option to flash cwm too. So thats it.
Sent from my OptimusBlack using xda app-developers app
Click to expand...
Click to collapse
Its done..buddy..:good:
Greate work...
Thanks a lot...
jrvariya said:
Its done..buddy..:good:
Greate work...
Thanks a lot...
Click to expand...
Click to collapse
Nice. Glad to help
Sent from my OptimusBlack using xda app-developers app

Paranoid Android Problem help

Hi all,'
I just installed Paranoid Android on my GT-I9070. But when i have installed it i can't call,text or internet.and my phone cant find my provider.
The serial number is unknown just like all the details of my provider.
How can i fix this? Or what did i do wrong ?
Please help me!?
Thanks in advance!
roboneter said:
Hi all,'
I just installed Paranoid Android on my GT-I9070. But when i have installed it i can't call,text or internet.and my phone cant find my provider.
The serial number is unknown just like all the details of my provider.
How can i fix this? Or what did i do wrong ?
Please help me!?
Thanks in advance!
Click to expand...
Click to collapse
Go back to stock, and see what would happen. Flash stock fw with Odin. Or use nandroid backup if you made one before. Always do when you experiment with some new ROM.
shut_down said:
Go back to stock, and see what would happen. Flash stock fw with Odin. Or use nandroid backup if you made one before. Always do when you experiment with some new ROM.
Click to expand...
Click to collapse
I just flashed back to my stock rom and it works great.
What could i do to make paranoid work?
Just check your firmware and baseband. If they're different (like baseband of XXLQB and firmware of DDULP8) then your baseband will get wiped when you flash a ROM. It's happened to me too. To prevent this problem just flash stock firmware through Odin in such a way that the baseband and firmware are the same. :thumbup::thumbup::thumbup:
Sent from my GT-I9070 using xda premium
Abhinandh Ajay said:
Just check your firmware and baseband. If they're different (like baseband of XXLQB and firmware of DDULP8) then your baseband will get wiped when you flash a ROM. It's happened to me too. To prevent this problem just flash stock firmware through Odin in such a way that the baseband and firmware are the same. :thumbup::thumbup::thumbup:
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
So which one is it gotta be ?
http://forum.xda-developers.com/showthread.php?t=2246822
I want to flash that one.
Sorry for noob questions xD
roboneter said:
So which one is it gotta be ?
http://forum.xda-developers.com/showthread.php?t=2246822
I want to flash that one.
Sorry for noob questions xD
Click to expand...
Click to collapse
I just went back to XXLQ4 or XXLPZ or something (I don't remember) then the baseband and firmware version will be the same and then just flash the ROM you want. I'm not sure if there's an easier way, maybe you can try backing up your EFS folder in stock and one you flash your ROM you can try restoring it. I've not tried this but you can do this and report. :thumbup:
And one more thing, as a member of xda you should really click thanks for the people who help you. :thumbup:
Sent from my GT-I9070 using xda premium
Abhinandh Ajay said:
I just went back to XXLQ4 or XXLPZ or something (I don't remember) then the baseband and firmware version will be the same and then just flash the ROM you want. I'm not sure if there's an easier way, maybe you can try backing up your EFS folder in stock and one you flash your ROM you can try restoring it. I've not tried this but you can do this and report. :thumbup:
And one more thing, as a member of xda you should really click thanks for the people who help you. :thumbup:
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
Oke thanks! I am downloading my firmware now.
But it is XXLK2 Firmware. If I try to root it i use this : http://forum.xda-developers.com/showthread.php?t=1660419 but that is not for my firmware version.
Does it need to be rooted to flash Paranoid android ore do i just need TWRP flashed?
roboneter said:
Oke thanks! I am downloading my firmware now.
But it is XXLK2 Firmware. If I try to root it i use this : http://forum.xda-developers.com/showthread.php?t=1660419 but that is not for my firmware version.
Does it need to be rooted to flash Paranoid android ore do i just need TWRP flashed?
Click to expand...
Click to collapse
No first flash any JB stock ROM and not GB and root with this method http://forum.xda-developers.com/showthread.php?t=2087424 and then install Cocore-E kernel from here http://forum.xda-developers.com/showthread.php?t=2140597 and then flash the ROM that you want :good:
Abhinandh Ajay said:
No first flash any JB stock ROM and not GB and root with this method http://forum.xda-developers.com/showthread.php?t=2087424 and then install Cocore-E kernel from here http://forum.xda-developers.com/showthread.php?t=2140597 and then flash the ROM that you want :good:
Click to expand...
Click to collapse
Yeah i see Thanks a lot. But XXLK2 root firmware is not available in 4.1.2...... Or when i flash from JB it doesn't matter what my baseband is ?
Base band is : XXLK2
EDITED
roboneter said:
Yeah i see Thanks a lot. But XXLK2 root firmware is not available in 4.1.2...... Or when i flash from JB it doesn't matter what my baseband is ?
Base band is : XXLK2
EDITED
Click to expand...
Click to collapse
For the root method that I linked the firmware and baseband don't matter. It works with any firmware. :thumbup:
Sent from my GT-I9070 using xda premium
Abhinandh Ajay said:
For the root method that I linked the firmware and baseband don't matter. It works with any firmware. :thumbup:
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
Thanks! I am trying now. Report when its done.
Thanks a lot!
Abhinandh Ajay said:
No first flash any JB stock ROM and not GB and root with this method http://forum.xda-developers.com/showthread.php?t=2087424 and then install Cocore-E kernel from here http://forum.xda-developers.com/showthread.php?t=2140597 and then flash the ROM that you want :good:
Click to expand...
Click to collapse
Worked!
Thank you man!

Categories

Resources