Stock rom for NVFlash with baseband - LG Optimus 2x

Hi,
Does someone have a link to an ROM for NVFlash where the baseband is included, cause I have some problems with the baseband, and flashing the baseband through Smartflash doesn't solve them, so I just wanted to flash it through NVFlash, but the baseband wasn't included and so my problems were still there...
Thank you!

Fendria said:
Hi,
Does someone have a link to an ROM for NVFlash where the baseband is included, cause I have some problems with the baseband, and flashing the baseband through Smartflash doesn't solve them, so I just wanted to flash it through NVFlash, but the baseband wasn't included and so my problems were still there...
Thank you!
Click to expand...
Click to collapse
+1 for this

I like this also, plz!!!
Q: Does it gives anywhere a newer Version than V10b? This would be Greatful

anyone?

You can't flash baseband with nvflash. You need smartflash.
Sent from my p990 on ICS

i have spent 10 days to do it with smartflash and tried so many computers and laptops but no luck, thats why i am asking for nvflash and there is one available for G2X and it flashes baseband aswell on my phone but it is not fully compatible with p990
sturmtruppler said:
You can't flash baseband with nvflash. You need smartflash.
Sent from my p990 on ICS
Click to expand...
Click to collapse

gugman said:
i have spent 10 days to do it with smartflash and tried so many computers and laptops but no luck, thats why i am asking for nvflash and there is one available for G2X and it flashes baseband aswell on my phone but it is not fully compatible with p990
Click to expand...
Click to collapse
You cannot flash basebands on the P990 with nvflash, regardless of whether or not you can do it on other models. You have to use smartflash as already mentioned above

If you manage to flash baseband with nvflash or find someone who can I'll buy you a beer! :beer:
Sent from my p990 on ICS

No offence, but enough, nvflash ain't, and won't be, able to flash baseband. If you guys want to you're free to pm me. Explain in detail about your issues with smartflash and I will do what I can to help you
Sent from the new smoothly LGP990

What's the problem flashing it with smart flash it does it purpose anything special of NV flash??

Not sure, maybe use kdz method.
Sent from my Galaxy Nexus using xda app-developers app

sukhochir said:
Not sure, maybe use kdz method.
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
Yes, kdz method flash baseband also, and what's better, it do not wipe anything.
Sent from my LG-P990 using xda app-developers app

Related

How can i backup current baseband?

Im posting this in dev section because here are the people who maybe know how to do this.
My optimus has a older baseband but i was wondering how i could backup this 1 before flashing the latest version
Im experiencing bad standby lags but need to be able to revert to old baseband if i deside to return phone for warrenty
Sent from my LG-P990 using XDA App
DarthD said:
Im posting this in dev section because here are the people who maybe know how to do this.
My optimus has a older baseband but i was wondering how i could backup this 1 before flashing the latest version
Im experiencing bad standby lags but need to be able to revert to old baseband if i deside to return phone for warrenty
Sent from my LG-P990 using XDA App
Click to expand...
Click to collapse
+1 I need to know this too
Whoops delete
Moeyyyy said:
+2 I need to know this too.
My base band is i9000xxjpp
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
sorry but... your's is from a Samsung Galaxy S
DarthD said:
Im posting this in dev section because here are the people who maybe know how to do this.
My optimus has a older baseband but i was wondering how i could backup this 1 before flashing the latest version
Im experiencing bad standby lags but need to be able to revert to old baseband if i deside to return phone for warrenty
Sent from my LG-P990 using XDA App
Click to expand...
Click to collapse
you can try to SmartFlash stock baseband from here http://forum.xda-developers.com/showthread.php?t=1008070
baliriot said:
you can try to SmartFlash stock baseband from here http://forum.xda-developers.com/showthread.php?t=1008070
Click to expand...
Click to collapse
this is a backup of the current baseband.. but not baseband backup.....??
+1, i also want to know how to backup my original baseband 20110218...
if we update fr12 which including baseband 0405, can we downgrade to the older baseband ?
maumaumiow said:
+1, i also want to know how to backup my original baseband 20110218...
if we update fr12 which including baseband 0405, can we downgrade to the older baseband ?
Click to expand...
Click to collapse
the baseband is NOT included, you still have to flash it..
I need the 20110218 baseband...
Does anyone have this?

help! i'm trying to flash my p925 to nighty p920

i try to flash my my p925 to p920 nighty
my p920 is att version v20p
already rooted, after i flashed to the cm10 latest verion(any cm10 version i tried) and i did reset, /clear cache
but everytime i start up, i see boot up screen, and when i'm on the android desktop it shut off by it self, i have tried every cm10 version on p920
the cm7, p920 version works fine. but not the cm10 it boot up, shut off by it self?
can anyone help! thanks
I suggest using the 21D baseband. 20P isn't stable with CM10.
i'm sorry, how do i flash 20p to 21d? i already flashed it to latest stock rom?
This link can be used for flashing different firmwares. Search around for the 21d kdz file.
http://forum.xda-developers.com/showthread.php?p=17177547
Sent from my LG-P925 (CM10) using xda app-developers app
ok, i flashed the 21d, and it start up, as p920, and in rooted, then i install recovery, and then i go install cm10, still start up, .. freeze turn off by it self
did i missed something here?
Did you ever flash the ICS port? If so you need to follow this guide to flash the uboot and xloader img's.
http://forum.xda-developers.com/showthread.php?p=35199371
Sent from my LG-P925 (CM10) using xda app-developers app
got it thank you so much for u help! i love the new firmware!!!
1 problem.. anyway to change the screen sensitivity? i think it's not as responsive as the old rom? any idea guys?
Great!... I'm using v21e...
da44050 said:
Did you ever flash the ICS port? If so you need to follow this guide to flash the uboot and xloader img's.
http://forum.xda-developers.com/showthread.php?p=35199371
Sent from my LG-P925 (CM10) using xda app-developers app
Click to expand...
Click to collapse
This was the step I was missing...
Now I'm on CM10 with the v21e Baseband... Everything seems to work...
Thanks!
weak signal...
now I notes that the signal is a little weak... In some places i just get 2G instead of 3G... also the wifi is a little bit less strong..
I'm going to try another BB...
Litatus said:
now I notes that the signal is a little weak... In some places i just get 2G instead of 3G... also the wifi is a little bit less strong..
I'm going to try another BB...
Click to expand...
Click to collapse
please help me to flash bb. I have tried the methods i have read on this forum. I need to flash v20c. I have windows 7 only.

[Q] About baseband

Hi guys, when I use NVflash to flash ROM, NVflash will also flash the Baseband or I will do it seperately ?
kennguy said:
Hi guys, when I use NVflash to flash ROM, NVflash will also flash the Baseband or I will do it seperately ?
Click to expand...
Click to collapse
No, it will not. You have to flash it separately using SmartFlash.
kt-Froggy said:
No, it will not. You have to flash it separately using SmartFlash.
Click to expand...
Click to collapse
Thanks...now I'm on DjangoManouche X 1.2 with baseband 30a, I flash baseband 30b but I got the error at the end of the flash (Disconnecting from the target). Any solutions ? :crying:
You could try smartflashing it with the AIO Toolkit here:
forum.xda-developers.com/showthread.php?t=2020737http://lg-phone-firmware.com/index.php?id_mod=3
Hope it helps!
Disconnect your phone and try it again that was also happen to me
Sent from my LG-P990 using Tapatalk 2

ZEUS ICS without baseband

Hi everybody,
I'm on ZG ROM (based V30B) and I've seen in Huexxxx's post that I must use smart flash tool and flash new baseband. My question is: can I flash IZS without flashing new baseband?
thx
alby.campa said:
Hi everybody,
I'm on ZG ROM (based V30B) and I've seen in Huexxxx's post that I must use smart flash tool and flash new baseband. My question is: can I flash IZS without flashing new baseband?
thx
Click to expand...
Click to collapse
No it's not possible !
Sv: ZEUS ICS without baseband
If you have a v30 baseband you can flash it and if you don't have it you must first flash that.
Regards
No, you don't HAVE to flash v30 baseband. However if you run into baseband related problems then you should. For instance I did not because there is no baseband for my area anyway and it works fine aside from seeing "unknown baseband" in about phone.
Sent from my LG-P970 using xda app-developers app
Sv: ZEUS ICS without baseband
jdayscokn said:
No, you don't HAVE to flash v30 baseband. However if you run into baseband related problems then you should. For instance I did not because there is no baseband for my area anyway and it works fine aside from seeing "unknown baseband" in about phone.
Sent from my LG-P970 using xda app-developers app
Click to expand...
Click to collapse
If he is not on a v30 baseband he should flash the pre izs on huexxx site.
And that contains a v30 baseband so yes it's is required..
Regards
jdayscokn said:
No, you don't HAVE to flash v30 baseband. However if you run into baseband related problems then you should. For instance I did not because there is no baseband for my area anyway and it works fine aside from seeing "unknown baseband" in about phone.
Sent from my LG-P970 using xda app-developers app
Click to expand...
Click to collapse
i ahve the same problem in another rom, nemesis X, baseband unknown, but all seem to work fine except the timezone auto detection that does not work so i had to update time manualy. my biggest question, which baseband should i flash, in my country LG didnt realse a stock v30xx. only stock v10e is the latest update. so what should i do if i run into problems, i can always fallback to another rom or throw this damn phone.
do you know what baseband should i install? since im realy not sure what to do.
thanks
Sol
Chances are it'll be fine with whichever baseband is available. I personally like the idea of using my regions baseband even if it is outdated. I've been on other baseband before and everything generally works. So take your pick if you really want to. But as I said before it is NOT necessary to hop onto IZS.
Sent from my LG-P970 using xda app-developers app
jdayscokn said:
Chances are it'll be fine with whichever baseband is available. I personally like the idea of using my regions baseband even if it is outdated. I've been on other baseband before and everything generally works. So take your pick if you really want to. But as I said before it is NOT necessary to hop onto IZS.
Sent from my LG-P970 using xda app-developers app
Click to expand...
Click to collapse
ok, my idea is that it is higly risky flash a baseband which I don't know what is it. if something going wrong, I think will be very difficult come back (Smart flash with gingerbread again). I keep my "unknown baseband" on my phone and wait for next release: in the IZS post I'm reading a lot of problem posts. I will wait.
thx
alby.campa said:
ok, my idea is that it is higly risky flash a baseband which I don't know what is it. if something going wrong, I think will be very difficult come back (Smart flash with gingerbread again). I keep my "unknown baseband" on my phone and wait for next release: in the IZS post I'm reading a lot of problem posts. I will wait.
thx
Click to expand...
Click to collapse
GPS and automatic timezone don't work if with unknown baseband
Don't worry
Just flash v30c .fls file.

[Q] Need a NVFlash stock rom with baseband

Only NvFlash is working on my pc and im trying to repair a friends phone.
Now i did try serveral rom's but stil have problemen with baseband/imei number.
So can somebody help me?
LG software wil not work also Smartflash keeps crasing at 50%.
Kind regards.
I have only just baseband problem try to flash again
Sent from my LG-P990 using xda app-developers app
Notopic1 said:
Only NvFlash is working on my pc and im trying to repair a friends phone.
Now i did try serveral rom's but stil have problemen with baseband/imei number.
So can somebody help me?
LG software wil not work also Smartflash keeps crasing at 50%.
Kind regards.
Click to expand...
Click to collapse
Use the all in one tool kit....you can use the nvflash method....or try to search for Stefan or Topo ics ROM for this method directly
O2X with Magical ICS ROM and magnificent kernels from my buddies
Nvflash is no use if you want to change baseband. The only ways to change baseband are via smartflash or flashing a stock rom with LG's software.
What error are you getting with smartflash?
Sent from my LG-P990 using Tapatalk 2
kingvortex said:
Nvflash is no use if you want to change baseband. The only ways to change baseband are via smartflash or flashing a stock rom with LG's software.
What error are you getting with smartflash?
Sent from my LG-P990 using Tapatalk 2
Click to expand...
Click to collapse
I'm getting disconect error's.
Software is installed proper.
LG software connection lost..
So i only get NVFlash to work.
Nobody knows the answer?
I suggest you look this post ... http://forum.xda-developers.com/showthread.php?t=2003888
is from Homero, a master of my world ..and if you have any problem... he resolve it!
I work myself perfect and smooth! good luck!

Categories

Resources