Hi everybody,
I'm on ZG ROM (based V30B) and I've seen in Huexxxx's post that I must use smart flash tool and flash new baseband. My question is: can I flash IZS without flashing new baseband?
thx
alby.campa said:
Hi everybody,
I'm on ZG ROM (based V30B) and I've seen in Huexxxx's post that I must use smart flash tool and flash new baseband. My question is: can I flash IZS without flashing new baseband?
thx
Click to expand...
Click to collapse
No it's not possible !
Sv: ZEUS ICS without baseband
If you have a v30 baseband you can flash it and if you don't have it you must first flash that.
Regards
No, you don't HAVE to flash v30 baseband. However if you run into baseband related problems then you should. For instance I did not because there is no baseband for my area anyway and it works fine aside from seeing "unknown baseband" in about phone.
Sent from my LG-P970 using xda app-developers app
Sv: ZEUS ICS without baseband
jdayscokn said:
No, you don't HAVE to flash v30 baseband. However if you run into baseband related problems then you should. For instance I did not because there is no baseband for my area anyway and it works fine aside from seeing "unknown baseband" in about phone.
Sent from my LG-P970 using xda app-developers app
Click to expand...
Click to collapse
If he is not on a v30 baseband he should flash the pre izs on huexxx site.
And that contains a v30 baseband so yes it's is required..
Regards
jdayscokn said:
No, you don't HAVE to flash v30 baseband. However if you run into baseband related problems then you should. For instance I did not because there is no baseband for my area anyway and it works fine aside from seeing "unknown baseband" in about phone.
Sent from my LG-P970 using xda app-developers app
Click to expand...
Click to collapse
i ahve the same problem in another rom, nemesis X, baseband unknown, but all seem to work fine except the timezone auto detection that does not work so i had to update time manualy. my biggest question, which baseband should i flash, in my country LG didnt realse a stock v30xx. only stock v10e is the latest update. so what should i do if i run into problems, i can always fallback to another rom or throw this damn phone.
do you know what baseband should i install? since im realy not sure what to do.
thanks
Sol
Chances are it'll be fine with whichever baseband is available. I personally like the idea of using my regions baseband even if it is outdated. I've been on other baseband before and everything generally works. So take your pick if you really want to. But as I said before it is NOT necessary to hop onto IZS.
Sent from my LG-P970 using xda app-developers app
jdayscokn said:
Chances are it'll be fine with whichever baseband is available. I personally like the idea of using my regions baseband even if it is outdated. I've been on other baseband before and everything generally works. So take your pick if you really want to. But as I said before it is NOT necessary to hop onto IZS.
Sent from my LG-P970 using xda app-developers app
Click to expand...
Click to collapse
ok, my idea is that it is higly risky flash a baseband which I don't know what is it. if something going wrong, I think will be very difficult come back (Smart flash with gingerbread again). I keep my "unknown baseband" on my phone and wait for next release: in the IZS post I'm reading a lot of problem posts. I will wait.
thx
alby.campa said:
ok, my idea is that it is higly risky flash a baseband which I don't know what is it. if something going wrong, I think will be very difficult come back (Smart flash with gingerbread again). I keep my "unknown baseband" on my phone and wait for next release: in the IZS post I'm reading a lot of problem posts. I will wait.
thx
Click to expand...
Click to collapse
GPS and automatic timezone don't work if with unknown baseband
Don't worry
Just flash v30c .fls file.
Related
Im posting this in dev section because here are the people who maybe know how to do this.
My optimus has a older baseband but i was wondering how i could backup this 1 before flashing the latest version
Im experiencing bad standby lags but need to be able to revert to old baseband if i deside to return phone for warrenty
Sent from my LG-P990 using XDA App
DarthD said:
Im posting this in dev section because here are the people who maybe know how to do this.
My optimus has a older baseband but i was wondering how i could backup this 1 before flashing the latest version
Im experiencing bad standby lags but need to be able to revert to old baseband if i deside to return phone for warrenty
Sent from my LG-P990 using XDA App
Click to expand...
Click to collapse
+1 I need to know this too
Whoops delete
Moeyyyy said:
+2 I need to know this too.
My base band is i9000xxjpp
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
sorry but... your's is from a Samsung Galaxy S
DarthD said:
Im posting this in dev section because here are the people who maybe know how to do this.
My optimus has a older baseband but i was wondering how i could backup this 1 before flashing the latest version
Im experiencing bad standby lags but need to be able to revert to old baseband if i deside to return phone for warrenty
Sent from my LG-P990 using XDA App
Click to expand...
Click to collapse
you can try to SmartFlash stock baseband from here http://forum.xda-developers.com/showthread.php?t=1008070
baliriot said:
you can try to SmartFlash stock baseband from here http://forum.xda-developers.com/showthread.php?t=1008070
Click to expand...
Click to collapse
this is a backup of the current baseband.. but not baseband backup.....??
+1, i also want to know how to backup my original baseband 20110218...
if we update fr12 which including baseband 0405, can we downgrade to the older baseband ?
maumaumiow said:
+1, i also want to know how to backup my original baseband 20110218...
if we update fr12 which including baseband 0405, can we downgrade to the older baseband ?
Click to expand...
Click to collapse
the baseband is NOT included, you still have to flash it..
I need the 20110218 baseband...
Does anyone have this?
Hi,
Does someone have a link to an ROM for NVFlash where the baseband is included, cause I have some problems with the baseband, and flashing the baseband through Smartflash doesn't solve them, so I just wanted to flash it through NVFlash, but the baseband wasn't included and so my problems were still there...
Thank you!
Fendria said:
Hi,
Does someone have a link to an ROM for NVFlash where the baseband is included, cause I have some problems with the baseband, and flashing the baseband through Smartflash doesn't solve them, so I just wanted to flash it through NVFlash, but the baseband wasn't included and so my problems were still there...
Thank you!
Click to expand...
Click to collapse
+1 for this
I like this also, plz!!!
Q: Does it gives anywhere a newer Version than V10b? This would be Greatful
anyone?
You can't flash baseband with nvflash. You need smartflash.
Sent from my p990 on ICS
i have spent 10 days to do it with smartflash and tried so many computers and laptops but no luck, thats why i am asking for nvflash and there is one available for G2X and it flashes baseband aswell on my phone but it is not fully compatible with p990
sturmtruppler said:
You can't flash baseband with nvflash. You need smartflash.
Sent from my p990 on ICS
Click to expand...
Click to collapse
gugman said:
i have spent 10 days to do it with smartflash and tried so many computers and laptops but no luck, thats why i am asking for nvflash and there is one available for G2X and it flashes baseband aswell on my phone but it is not fully compatible with p990
Click to expand...
Click to collapse
You cannot flash basebands on the P990 with nvflash, regardless of whether or not you can do it on other models. You have to use smartflash as already mentioned above
If you manage to flash baseband with nvflash or find someone who can I'll buy you a beer! :beer:
Sent from my p990 on ICS
No offence, but enough, nvflash ain't, and won't be, able to flash baseband. If you guys want to you're free to pm me. Explain in detail about your issues with smartflash and I will do what I can to help you
Sent from the new smoothly LGP990
What's the problem flashing it with smart flash it does it purpose anything special of NV flash??
Not sure, maybe use kdz method.
Sent from my Galaxy Nexus using xda app-developers app
sukhochir said:
Not sure, maybe use kdz method.
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
Yes, kdz method flash baseband also, and what's better, it do not wipe anything.
Sent from my LG-P990 using xda app-developers app
I'm running v20c right now but I've got a rom backed up in cwm that's on v20p baseband ... can I use cwm to backup to it or do I need to reflash v20p before I back it up does anyone know ?
Sent from my LG-P920 using XDA
Yes it should you just won't flash baseband unless you use LG flash tool so you will have the rom on 20c baseband Wich is the same as 20p I believe someone correct me if I am wrong thank me if I am correct already
sent from my acidhazard thrill
wayno140 said:
Yes it should you just won't flash baseband unless you use LG flash tool so you will have the rom on 20c baseband Wich is the same as 20p I believe someone correct me if I am wrong thank me if I am correct already
sent from my acidhazard thrill
Click to expand...
Click to collapse
I believe your right I didn't think cwm flashed basebands
Sent from my LG-P920 using XDA
if it dont work you can use acid hazard to put the stock 20p kernel which i tried today with the thrills v2.2 for 20p it didnt work over 20c baseband till i tried lestats kernel option and i put the att stock kernel on and it work doesnt change baseband but makes 20p roms work on atleast 20c i know atleast that particular combination
If so, witch bb/ril are you using? I'm trying 20q and 20s with Tim but after some hours I lost signal and my phone still offline after that until I reboot it.
Any tips?
Sent from my LG-P990 using xda app-developers app
i do have one, bought it from claro, but i flashed a stock, clean rom, from the stick topic in android development, and everything's ok so far, btw , have you tried another chip!? maybe theres a problem with tim and not the device ")
I'm using baseband 0725 and RIL V10d, europe.
sterki said:
i do have one, bought it from claro, but i flashed a stock, clean rom, from the stick topic in android development, and everything's ok so far, btw , have you tried another chip!? maybe theres a problem with tim and not the device ")
Click to expand...
Click to collapse
No, I don't. Actually I was thinking on this, but all my important contacts use Tim, so I prefer trying to keep it
.
darkshot said:
I'm using baseband 0725 and RIL V10d, europe.
Click to expand...
Click to collapse
Thanks, I'll try it and report back.
Sent from my LG-P990 using xda app-developers app
I'm using 1035_21_20112803, with (0823 21d), with corresponding RIL.
I installed v10d but when I try to use its ril I get bootloop on gb rom
Sent from my LG-P990 using xda app-developers app
BB 0725 - Ril 0725 v10d europe; 0823
Using owains #80 domination with harsh kernel. Using lg p990h
Enviado de meu LG-P990 usando o Tapatalk 2
louiscypherbr said:
I installed v10d but when I try to use its ril I get bootloop on gb rom
Sent from my LG-P990 using xda app-developers app
Click to expand...
Click to collapse
Are you using getril? What's your bb? Take a look at the fixed bb topic from tonyp on the development section, Theres also the lg ril app on the market.
Enviado de meu LG-P990 usando o Tapatalk 2
TIM thats ur problem, i use 20s CLARO no problem
louiscypherbr said:
If so, witch bb/ril are you using? I'm trying 20q and 20s with Tim but after some hours I lost signal and my phone still offline after that until I reboot it.
Any tips?
Sent from my LG-P990 using xda app-developers app
Click to expand...
Click to collapse
I had the same problem, i'm from São Paulo and always used TIM, and had the same doubt that you are having now, "The problem is the Optimus 2x or the TIM", the answer (at less, for me), is TIM. I've changed my carrier to Vivo and now my Optimus 2x really looks like other phone. Never had a signal break like i had with TIM (that was too frequent.
I have the same problem with TIM Norte. Recent baseband 1035.21_20120521.
When I enter in a garage or elevator, where it's normal to loose the phone signal, then exit those places, 50% of the time I have to restart my phone to get the signal back. Sometimes switch airplane mode on/off works.
Using owain's CM9 build 80, but I always had this problem since my stock v20d out of the box. This newest baseband 20120521 seems to reduce this problem, but still occur sometimes, previous basebands were even worse, even in normal places my phone was disconnect from TIM network.
It looks like that ths problem is minimized now, using bb v10d with stock 20q ril on 20q rebuild. I'll use it for more time and report it here.
Yes, we all know that we can minimize our problems here changing to vivo or even claro, but as I said, all my important contracts use Tim, and the Galaxy ace from my wife also uses Tim and never loose the network, so yes, the problem is with o2x.
Sent from my LG-P990 using xda app-developers app
lcsdms said:
Are you using getril? What's your bb? Take a look at the fixed bb topic from tonyp on the development section, Theres also the lg ril app on the market.
Enviado de meu LG-P990 usando o Tapatalk 2
Click to expand...
Click to collapse
Yes,I used getril but I think that I can't use v10 ril on stock GB.
My bb now is V10d as suggested some posts before.
Sent from my LG-P990 using xda app-developers app
well as i said, i also used tim on mine, just to check, everything ok, signal seems to be weaker indeed, but its always with ate leats 2bars , never lost it completely, also, i use vivo most of the time, and the signal is perfect....
louiscypherbr said:
If so, witch bb/ril are you using? I'm trying 20q and 20s with Tim but after some hours I lost signal and my phone still offline after that until I reboot it.
Any tips?
Sent from my LG-P990 using xda app-developers app
Click to expand...
Click to collapse
Mine is from Claro, stock baseband, matching RIL (V20a), 20s ROM.
it depends on your ROM, i used all possible roms, basebands and already used both, TIM and now im on claro.
when using tim problem all the time, any rom and bb/ril
on claro got problem on stock roms while using old basebands/rils and with ICS ROMS.
using GB roms and newers Basebands i forget about this problem.
*btw on ICS roms the problem isnt on baseband, i will find the best post about this problem and paste here to you know. If you want to use ICS i recommend to use newer baseband and use Toogle2G app that you can find easly on devs threads.
again, the best combination to day by day use is a GB rom (cm7 better than MIUI, just opinion) and newer basebands/ril.
Like i said before i tryied a lot of combination, using this phone since 01/dec/2011 and the best ever combination is:
-CM7 ROM (i use temasek 129)
-0521 Baseband
-good kernel (using vadonka 2.6.x now, but temasek default is more stable, Misjudged also good)
*if it helps you, thanks me
Its a good topic, I was thinking to make the same
i use NovaHD bb725/ril 405 v10d US, with CLARO
Sometimes i lost signal and need to reboot.
I tried so many diferents ril, but, till now, i didt find a good combination
Keep searching...
Does anyone know what is the original BB?
Dead_Rabbit said:
Its a good topic, I was thinking to make the same
i use NovaHD bb725/ril 405 v10d US, with CLARO
Sometimes i lost signal and need to reboot.
I tried so many diferents ril, but, till now, i didt find a good combination
Keep searching...
Does anyone know what is the original BB?
Click to expand...
Click to collapse
1035.21 on the P990 that is manufactured in Brazil.
Anyone using p990 in Brazil?
I do have p990, i'm in Brazil, BUT i'm not using it !!!
It's frozen, dead.. almost 1 week trying to revive with Smartflash and KDZ update tool, but just got 1 day alive with Smartflash
really disapointed with my O2x =/
PM me for help. Mine was dead just like that.
Sent from either a P920 or P990, or MB860...or a piece of pudding.
i try to flash my my p925 to p920 nighty
my p920 is att version v20p
already rooted, after i flashed to the cm10 latest verion(any cm10 version i tried) and i did reset, /clear cache
but everytime i start up, i see boot up screen, and when i'm on the android desktop it shut off by it self, i have tried every cm10 version on p920
the cm7, p920 version works fine. but not the cm10 it boot up, shut off by it self?
can anyone help! thanks
I suggest using the 21D baseband. 20P isn't stable with CM10.
i'm sorry, how do i flash 20p to 21d? i already flashed it to latest stock rom?
This link can be used for flashing different firmwares. Search around for the 21d kdz file.
http://forum.xda-developers.com/showthread.php?p=17177547
Sent from my LG-P925 (CM10) using xda app-developers app
ok, i flashed the 21d, and it start up, as p920, and in rooted, then i install recovery, and then i go install cm10, still start up, .. freeze turn off by it self
did i missed something here?
Did you ever flash the ICS port? If so you need to follow this guide to flash the uboot and xloader img's.
http://forum.xda-developers.com/showthread.php?p=35199371
Sent from my LG-P925 (CM10) using xda app-developers app
got it thank you so much for u help! i love the new firmware!!!
1 problem.. anyway to change the screen sensitivity? i think it's not as responsive as the old rom? any idea guys?
Great!... I'm using v21e...
da44050 said:
Did you ever flash the ICS port? If so you need to follow this guide to flash the uboot and xloader img's.
http://forum.xda-developers.com/showthread.php?p=35199371
Sent from my LG-P925 (CM10) using xda app-developers app
Click to expand...
Click to collapse
This was the step I was missing...
Now I'm on CM10 with the v21e Baseband... Everything seems to work...
Thanks!
weak signal...
now I notes that the signal is a little weak... In some places i just get 2G instead of 3G... also the wifi is a little bit less strong..
I'm going to try another BB...
Litatus said:
now I notes that the signal is a little weak... In some places i just get 2G instead of 3G... also the wifi is a little bit less strong..
I'm going to try another BB...
Click to expand...
Click to collapse
please help me to flash bb. I have tried the methods i have read on this forum. I need to flash v20c. I have windows 7 only.