Database Develop

tun.ko for 4.1.57

Attached tun.ko for 4.1.57. Works for me with VPNC. I put it in /system/lib and the VPNC Widget can load it.

awesome!!!! i was waiting for this to be able to connect to my cisco vpn!
great post!!!

Note: network connection tracking does not work
This means that after you connect to VPNC, disconnect from VPNC, turn wifi off, and then turn wifi back on, your connection will be hosed. As a workaround, you can run the VPNC widget settings pane and retoggle wifi. This resets the network state.

thx for this tread.good job

Thanks for shared! this file working well on 1.83 too

It's working perfectly on the Brazillian version of Atrix from Claro carrier.
I really wanted the possibility of compiling other modules for my Atrix stock kernel.
I really wanted to use some volume encryption functionality... As such a tool does not exist natively for Android, I`m thinking about using some kernel functinoality such as Loop-AES, LUKS, DM-Crypt or even some userspace FS for encryption (FUSE).
So, could anyone point me where i can find the source code for the Atrix kernel to try to compile those modules for it? I really think that this could be a great thing. One of the very fews things that i miss on Full Linux.
Thanls in advance.

victorhora said:
It's working perfectly on the Brazillian version of Atrix from Claro carrier.
I really wanted the possibility of compiling other modules for my Atrix stock kernel.
I really wanted to use some volume encryption functionality... As such a tool does not exist natively for Android, I`m thinking about using some kernel functinoality such as Loop-AES, LUKS, DM-Crypt or even some userspace FS for encryption (FUSE).
So, could anyone point me where i can find the source code for the Atrix kernel to try to compile those modules for it? I really think that this could be a great thing. One of the very fews things that i miss on Full Linux.
Thanls in advance.
Click to expand...
Click to collapse
Victor, are you using the stock kernel with this or did you need to recompile it?

I'm very sorry for the looooooooooooooooong delay in the answer.
And yes i was using on the stock kernel (Claro Brazil Android 2.2). Now i'm trying to use OpenVPN on the latest 2.3.6 official rom and it's not working anymore...
I'm thinking in some workround... any ideas?
Cheers.

victorhora said:
I'm very sorry for the looooooooooooooooong delay in the answer.
And yes i was using on the stock kernel (Claro Brazil Android 2.2). Now i'm trying to use OpenVPN on the latest 2.3.6 official rom and it's not working anymore...
I'm thinking in some workround... any ideas?
Cheers.
Click to expand...
Click to collapse
The tun.ko module doesn't work, I was going to compile one for 2.3.4 (at least the stock kernel) but it seems my desktop killed itself, and I'm not going to install linux on my laptop (it seems to suck with booting from CD, and USB doesn't work... no idea why, but it works fine with Windows Discs)
Might consider using Faux's kernel, it has TUN/TAP (I've never tested though)

[Q] Stable Honeycomb witn USB gamepad support

Hello.
I was wondering if anybody knows for sure of a custom ROM that has USB gamepad support? I have been trying pretty much all the ones in XDA and its hit or miss. I found Galaxy Soup works but its beta and the camera doesnt function.
I think the magic is in Motleys version three kernel. Maybe there is a Honeycomb ROM with that kernel?
Thanks for the time

Xperia X8 wi-fi not working(JB Mini Project)

Hello guys,
I am brand new here,as after 3 years of owning a X8 i decided to jump to other ROM,because i was bored of the simple design of his menu and i was so frustrated to stay back with android market when my friends had messenger for facebook e.g.,i had to refresh again and again my opera..and much more apps and games i would like to play.So,i decided to start searching for new ROMs,and i found MIUI,but i wasnt able to find a stable version to dl for my phone.Then i found JB Mini Project,I succeeded on installing it on X8 but there is one thing that wont work in every version of JB i have tried!THE WI-FI!It is really frustrating for me!I am so begginner to those things,but i understand that its not only me that will have this problem and that developers might be working on it right now(I am 3D designer and i know about beta versions of things,even I have to release again and again my creation because of a bug),but i really hope someone had this problem too and found a fix on it..I tried a fix i found in forums with Titanium Backup,but nothing...
Anyone knows anything..just help me out with this.:crying:
Thanks in advance guys!:cyclops:

so noone knows nothing in here?thats sweet

SrSGr said:
so noone knows nothing in here?thats sweet
Click to expand...
Click to collapse
Patience my friend x)
What wifi problem do you have? Unable to detect Adhoc connection?
Have You tried this Kernel + Rom ? (All JB rom is unable to scan adhoc wifi. Except if you make changes to the source and compile it yourself)
If you want to surf the internet but with not using wifi and using a cable, This is a Post for you.

use back stock ROM (just kidding

CKKnot said:
Patience my friend x)
What wifi problem do you have? Unable to detect Adhoc connection?
Have You tried this Kernel + Rom ? (All JB rom is unable to scan adhoc wifi. Except if you make changes to the source and compile it yourself)
If you want to surf the internet but with not using wifi and using a cable, This is a Post for you.
Click to expand...
Click to collapse
Ok the problem is that i try to turn it on but it wont,the toggle bar just moves to be enabled,but it never gets enabled!It just goes back to off possition..With a few words,i cant enable Wi-Fi..So..as i said my friend,i am newbie here,so please try to explain me what i should do with those rom and kernel you send..should i go back to stock rom,reflash this kernel and install this rom?Is this the JB mini project too or something similar and stable without bugs?
Thanks in advance!

SrSGr said:
Ok the problem is that i try to turn it on but it wont,the toggle bar just moves to be enabled,but it never gets enabled!It just goes back to off possition..With little words,i cant enable Wi-Fi..So..as i said my friend,i am newbie here,so please try to explain me what i should do with those rom and kernel you send..should i go back to stock rom,reflash this kernel and install this rom?Is this the JB mini project too or something similar and stable without bugs?
Thanks in advance!
Click to expand...
Click to collapse
Maybe the rom + kernel combination is wrong or the rom is just being buggy.
I just personally liked nAa's work because he release a stable version of every product.
If you want to change into the recommended rom that I just told you;
1. Flash the latest kernel (06)
2. Follow instruction on the kernel post. (/system wipe at recovery before flashing a rom & etc)
3. Flash the rom. Followed by the GAPPS
4. As it said, this is my recommendation steps. I do not guarantee your satisfactory

CKKnot said:
Maybe the rom + kernel combination is wrong or the rom is just being buggy.
I just personally liked nAa's work because he release a stable version of every product.
If you want to change into the recommended rom that I just told you;
1. Flash the latest kernel (06)
2. Follow instruction on the kernel post. (/system wipe at recovery before flashing a rom & etc)
3. Flash the rom. Followed by the GAPPS
4. As it said, this is my recommendation steps. I do not guarantee your satisfactory
Click to expand...
Click to collapse
Thank you,I am gonna test it and I will keep you informed here soon!
EDIT:It works great!ignore my PM.I flashed kernel 5 not 6 and it works like a charm.Thanks a lot for helping me out!

SrSGr said:
Thank you,I am gonna test it and I will keep you informed here soon!
EDIT:It works great!ignore my PM.I flashed kernel 5 not 6 and it works like a charm.Thanks a lot for helping me out!
Click to expand...
Click to collapse
Replied. It because I forgot to mention that 06 has a little bit changes that will make normal jb rom that is not released pior to the kernel release data will not boot

SrSGr said:
Hello guys,
I am brand new here,as after 3 years of owning a X8 i decided to jump to other ROM,because i was bored of the simple design of his menu and i was so frustrated to stay back with android market when my friends had messenger for facebook e.g.,i had to refresh again and again my opera..and much more apps and games i would like to play.So,i decided to start searching for new ROMs,and i found MIUI,but i wasnt able to find a stable version to dl for my phone.Then i found JB Mini Project,I succeeded on installing it on X8 but there is one thing that wont work in every version of JB i have tried!THE WI-FI!It is really frustrating for me!I am so begginner to those things,but i understand that its not only me that will have this problem and that developers might be working on it right now(I am 3D designer and i know about beta versions of things,even I have to release again and again my creation because of a bug),but i really hope someone had this problem too and found a fix on it..I tried a fix i found in forums with Titanium Backup,but nothing...
Anyone knows anything..just help me out with this.:crying:
Thanks in advance guys!:cyclops:
Click to expand...
Click to collapse
hey i had same problem with jbmp when i used jbmp kernel but when i flashed with nAa jb 05 kernel it worked fine..

[Q] Recommend me a ROM?

I tried CM10.1 but it felt too plain so I changed to Tonyps "THE ROM" build, Had too many
troubles whit WIFI since it kept connecting and disconnecting at random, Made any online
game from the play store useless...
Then Flashed the new MIUI rom here from rugglez but the phone simply would never get
connected to the mobile network so I could not make calls or be called... Made the phone
kind of a brick...
After that I went to the MIUI offcial website and downloaded their new offcial build in testing
phase for the P990... Discovered it runs horrible on the P990 whit 512 MB RAM and always
keeps the free RAM at 40 or 30 MB... Laggy to no end...
So, pretty much I have hit a roadblock on all available ROMs for the P990... I don't want any
ROM that's made by Tonyp because for some reason Kowalsky Kernel screws my WIFI
all the time by random connects and disconnects...
Whit all that stated I'm tempted to go back to CM 10.1 Nightly unless there is another rom
that I have not heard about. Would be nice if there is a JB rom that is not CM or Tonyp's
that doesn't have the WIFI problem...
Anyway, Is there any other kernel apart from Kowalsky that let's me use fast charge on my
P990?
EDIT:
Ohhh... Now I remember why I ditched CM, No external SD Card support....

You could try to disable the wifi powermanagment options in kowalski kernel via kowalski manager, that could fix the wifi disconnects.
Regarding ROM I would give CM 10.2 from tonyp a try and combine it with the new 3.1 kernel from pengus77, I'm happy with it

sudden36 said:
You could try to disable the WiFi power management options in kowalski kernel via kowalski manager, that could fix the WiFi disconnects.
Regarding ROM I would give CM 10.2 from tonyp a try and combine it with the new 3.1 kernel from pengus77, I'm happy with it
Click to expand...
Click to collapse
Ok, I'll try the 3.1 kernel from Pengus77 and see if that solves the random WiFi disconnects.
EDIT:
Okay, It seems the 3.1 exp alpha 14 kernel from pengus77 did the trick. For now I'm no
longer getting anymore WiFi disconnects on his rom "THE ROM" build 26!
Also bought the "Trickster MOD" app as a replacement for the Kowalsky manager and
I'm quite satisfied whit it. Let's see how it goes in the course of the week!

[Q] upgrading kernel to .35

I am not much of a tech person but recently I have got attacghed to my old phone mi 410 and I am on kernel .32
I have no idea how to update this kernel or what i need to do put Xperiencexperia rom on it. I guess i have to use SULTR but I cannot use it because the micro USB port on my device is not working anymore. Anobody who can guide me or help me or suggest something on what can be done to make Xperiencexperia ROM work or is their nothing that can be done ?