Database Develop

[help] galaxy s i9000 won't boot

when i try to turn up the device (i9000) the samsung screen shows and then the samsung music hits but he is does not respond...
i've tried to put it in download mode like the menuals told but instead of that i get the screen:
RST_STAT = 0x1
PMIC_IRQ1 = 0x3c
PMIC_IRQ2 = 0x0
PMIC_IRQ3 = 0x0
PMIC_IRQ4 = 0x0
PMIC_STATUS1 = 0xc0
PMIC_STATUS2 = 0x2c
and a android picture with messege: "POWER RESET or UNKNOWN UPLOAD MODE"
Can anyone help me please :-(
thanks

That sucks man
It's the first time I see this message
I think you boot don't work

mine has done that a couple times. I have always just taken out the battery, unplug the USB, put the battery back in, hold Vol down and home and press the power button to enter download mode, then flash with ODIN.
Not sure if that will work for you. Hope that helps.

never seen that one but do what dagentooboy recommended and you will be fine. as long as you get into download mode the device can be restored with odin! terrible blurry picture btw. can't read anything

that's the screen when i push the download combo
i tried to press vol down + home + power and that's the screen i get after one galaxy s open screen...

keep the battery out for more than 30 secs and try again.
Sent from my GT-I9000 using XDA App

WOW! first time i see that screen
how did you get it there?
a failed Odin Flash?
beckhamk said:
when i try to turn up the device (i9000) the samsung screen shows and then the samsung music hits but he is does not respond...
i've tried to put it in download mode like the menuals told but instead of that i get the screen:
RST_STAT = 0x1
PMIC_IRQ1 = 0x3c
PMIC_IRQ2 = 0x0
PMIC_IRQ3 = 0x0
PMIC_IRQ4 = 0x0
PMIC_STATUS1 = 0xc0
PMIC_STATUS2 = 0x2c
and a android picture with messege: "POWER RESET or UNKNOWN UPLOAD MODE"
Can anyone help me please :-(
thanks
Click to expand...
Click to collapse

i just tried to put the device on download mode.... vol down + home + power..
however odin3 recognize the deivce in that state but it hung at file analysis...
tried boot the pc or switch one but nothing works...
i just bought it damn :-(
SOS

beckhamk said:
i just tried to put the device on download mode.... vol down + home + power..
however odin3 recognize the deivce in that state but it hung at file analysis...
tried boot the pc or switch one but nothing works...
i just bought it damn :-(
SOS
Click to expand...
Click to collapse
try again. odin sometimes hangs, especially at the "file analysis". don't worry, as log as odin DOES recognise the device it's not bricked! stay calm and try again!

i tried everything nothing works :-(....
that screen is killing me... :-/

If you are in the UK you can ship it me maybe and I can flash?

Hold Vol down + Home + Power until the i9000 powers on, then quickly release power button, only holding vol down + home until you get into download mode.

still nothing works no i have a screen with the messege
power reset or unknown upload mode
:-(

that's the screen i get when i try to get into download mode
vol down + home + power

does anyone have any idea?

Have u tried vol up + home + power? And do a restore? Just checking...
Sent from my GT-I9000 using XDA App

It says 'FORCED UPLOAD BY KEY PRESSING'.

How did you get there in the first place? What went wrong?

Try to boot the phone with usb cable out & batery in & try the key combinations.

Very unusual, never seen this screen before. Usually when I have any booting problems I just reflash again with Odin. Don't think that will work here though...

POWER RESET or UNKNOWN UPLOAD MODE?

I have an international GT I9000 galaxy s and i have the stuck at boot screen problem im trying to get into download mode to flash with odin, But when i do the vol down+home+power i get to this screen with the green android logo saying POWER RESET or UNKNOWN UPLOAD MODE and in red it says
RST_STAT = 0x1
PMIC_IRQ1 = 0x3c
PMIC_IRQ2 = 0x0
PMIC_IRQ3 = 0x0
PMIC_IRQ4 = 0x0
PMIC_STATUS1 = 0xc0
PMIC_STATUS2 = 0x2c
Any way to fix this?

MC-84 said:
I have an international GT I9000 galaxy s and i have the stuck at boot screen problem im trying to get into download mode to flash with odin, But when i do the vol down+home+power i get to this screen with the green android logo saying POWER RESET or UNKNOWN UPLOAD MODE and in red it says
RST_STAT = 0x1
PMIC_IRQ1 = 0x3c
PMIC_IRQ2 = 0x0
PMIC_IRQ3 = 0x0
PMIC_IRQ4 = 0x0
PMIC_STATUS1 = 0xc0
PMIC_STATUS2 = 0x2c
Any way to fix this?
Click to expand...
Click to collapse
hi dude, i have just passed this problem , i was so confused like you at first but you won't find any solution except the JTAG method.... just search for it

ghallab said:
hi dude, i have just passed this problem , i was so confused like you at first but you won't find any solution except the JTAG method.... just search for it
Click to expand...
Click to collapse
Did you get yours to work? and by jtag do you mean the usb jig? Someone please shed some light on this issue. Thanks

bump...............????

ghallab said:
hi dude, i have just passed this problem , i was so confused like you at first but you won't find any solution except the JTAG method.... just search for it
Click to expand...
Click to collapse
Either lies or total douchery. "Dude, I just had this problem and I fixed it! Nyeh nyeh!"
How about you contribute with a link to where you found your solution? Unless this was a super common and well known fix, "just search for it" isn't helping.

I've got the exact same thing!
Yesterday my phone just wouldn't boot...
After leaving it for a few hours, I connected it to usb and the phone booted into Android, then rebooted. Eventually I couldn't access anything and it was stuck in a bootloop. I could only get into Download Mode, no Recovery Mode, and flashing a new rom (Darky's Resurrection Edition) didn't help either.
This morning I get the POWER RESET or UNKNOWN UPLOAD MODE message. The last thing I did yesterday was flash to I9000XXJP2 stock.
A fix would really be nice!

This does work to get download mode back
http://forum.xda-developers.com/showthread.php?t=819551
100% success using a breadboard, micro usb from an old car charger
2x 150k 1x1k
I MacGuyvered the 4&5th pins without solder so it was unstable and didn't work at first.
But Download mode is on the screen.
Now all i have to do is wait for the return of the windows machine to to odin it back.
time to read up on that now.
good luck

No power button
MC-84 said:
I have an international GT I9000 galaxy s and i have the stuck at boot screen problem im trying to get into download mode to flash with odin, But when i do the vol down+home+power i get to this screen with the green android logo saying POWER RESET or UNKNOWN UPLOAD MODE and in red it says
RST_STAT = 0x1
PMIC_IRQ1 = 0x3c
PMIC_IRQ2 = 0x0
PMIC_IRQ3 = 0x0
PMIC_IRQ4 = 0x0
PMIC_STATUS1 = 0xc0
PMIC_STATUS2 = 0x2c
Any way to fix this?
Click to expand...
Click to collapse
I may be very late but try this,
1. Run Odin 1.8x
2. Take out battery
3. Put battery back
4. press both volumes buttons
5. Plug in microusb
Don't press the power button at all
Good luck

Have You succeeded to fix it? Have same issue ;/

Thanks man.. that was the solution.

lebwel said:
I may be very late but try this,
1. Run Odin 1.8x
2. Take out battery
3. Put battery back
4. press both volumes buttons
5. Plug in microusb
Don't press the power button at all
Good luck
Click to expand...
Click to collapse
Bro.. u saved me.. thanks a lot.. a lot a lot..

EpullSalvatrucha said:
Bro.. u saved me.. thanks a lot.. a lot a lot..
Click to expand...
Click to collapse
could you explain that in a bit more detail?

EpullSalvatrucha said:
Bro.. u saved me.. thanks a lot.. a lot a lot..
Click to expand...
Click to collapse
Np. Glad it helped
---------- Post added at 05:16 AM ---------- Previous post was at 05:09 AM ----------
nishanta2006 said:
could you explain that in a bit more detail?
Click to expand...
Click to collapse
1. Download Odin 1.8x and execute it (run it/double click it)
2. Open your phone and take out the battery
3. Install the same battery back the same way you took it out
4. Press both volume buttons (that means up and down and keep it pressed)
5. Plug in your charger line to your phone. The USB side goes directly to your computer.
I don't know how more specific I can get. Good luck

MC-84 said:
I have an international GT I9000 galaxy s and i have the stuck at boot screen problem im trying to get into download mode to flash with odin, But when i do the vol down+home+power i get to this screen with the green android logo saying POWER RESET or UNKNOWN UPLOAD MODE and in red it says
RST_STAT = 0x1
PMIC_IRQ1 = 0x3c
PMIC_IRQ2 = 0x0
PMIC_IRQ3 = 0x0
PMIC_IRQ4 = 0x0
PMIC_STATUS1 = 0xc0
PMIC_STATUS2 = 0x2c
Any way to fix this? [/QUOTE
Hey Guys. I also had the same problem but without all the RST_STAT = 0x1 bull crap. After replacing the motherboard, (not telling you to replace your motherboard) I couldn't get into recovery mode, rather it would always go into the POWER RESET or UNKNOWN UPLOAD MODE. The simple trick for me that worked was just tapping the power button while holding the volume down and home button. May work for you, just don't hold the power button down, otherwise it will go into the POWER RESET or UNKNOWN UPLOAD MODE.
Hope this helps.
Click to expand...
Click to collapse

Same Problem : SOLVED!!!
I encountered the same problem. What i did :
1. Uninstall Facebook
2. Uninstall Instagram
3. Re-download those apps and install
4. Walla!
Hopefully this help.

thanks
lebwel said:
Np. Glad it helped
---------- Post added at 05:16 AM ---------- Previous post was at 05:09 AM ----------
1. Download Odin 1.8x and execute it (run it/double click it)
2. Open your phone and take out the battery
3. Install the same battery back the same way you took it out
4. Press both volume buttons (that means up and down and keep it pressed)
5. Plug in your charger line to your phone. The USB side goes directly to your computer.
I don't know how more specific I can get. Good luck
Click to expand...
Click to collapse
thank u man^^ u saved me too

Perfect!!
Fingertwister Jr. said:
MC-84 said:
I have an international GT I9000 galaxy s and i have the stuck at boot screen problem im trying to get into download mode to flash with odin, But when i do the vol down+home+power i get to this screen with the green android logo saying POWER RESET or UNKNOWN UPLOAD MODE and in red it says
RST_STAT = 0x1
PMIC_IRQ1 = 0x3c
PMIC_IRQ2 = 0x0
PMIC_IRQ3 = 0x0
PMIC_IRQ4 = 0x0
PMIC_STATUS1 = 0xc0
PMIC_STATUS2 = 0x2c
Any way to fix this? [/QUOTE
Hey Guys. I also had the same problem but without all the RST_STAT = 0x1 bull crap. After replacing the motherboard, (not telling you to replace your motherboard) I couldn't get into recovery mode, rather it would always go into the POWER RESET or UNKNOWN UPLOAD MODE. The simple trick for me that worked was just tapping the power button while holding the volume down and home button. May work for you, just don't hold the power button down, otherwise it will go into the POWER RESET or UNKNOWN UPLOAD MODE.
Hope this helps.
Click to expand...
Click to collapse
This did it perfect for me I was getting annoyed i couldn't hard reset into anything but Watchdog screen held volume down and home tapped power button 3 times and it booted normal February 18th 2017 thanks for the help bro
Click to expand...
Click to collapse

I was presented with Upload Mode when my phone froze and I had to restart.
I simply pressed the volume down and power button until the Samsung logo appeared. Then released and it booted right up.
Hope this helps in some sort of way

S3 Neo+
wernerhp said:
I've got the exact same thing!
Yesterday my phone just wouldn't boot...
After leaving it for a few hours, I connected it to usb and the phone booted into Android, then rebooted. Eventually I couldn't access anything and it was stuck in a bootloop. I could only get into Download Mode, no Recovery Mode, and flashing a new rom (Darky's Resurrection Edition) didn't help either.
This morning I get the POWER RESET or UNKNOWN UPLOAD MODE message. The last thing I did yesterday was flash to I9000XXJP2 stock.
A fix would really be nice!
Click to expand...
Click to collapse
My S3 Neo+ did the same after a stock install leave it for like 5mins then reboot. Or if you can boot into download mode, then reflash the recovery using odin. then do the rom installation stuff.
In theory, upload mode is supposed to be the doorstep of S-B00T terminal. Which is the base of the bootloader inclduing download mode.

[Q] 3-button Download OK but Recovery not OK

Hi,
I got a strange problem with my I9000 after flashing ROM.
Initially, the 3-button combination for Download and Recovery works well.
But after several ROM flashings (ODIN), my SSGS can't go into Recovery mode (vol up + home + power). However, it can go into Download mode (vol dn + home + power).
When I want to go into Recovery mode, I resort to use the power button (built in feature of DARKYROM). I also try the 3-button-fixed but to no avail.
Today, I flash ROM to the stock JV1.
I try to go into Recovery mode again.
I got:
RST_STAT = 0X4
PMIC_IRQ1 = 0Xc8
PMIC_IRQ2 = 0X0
PMIC_IRQ3 = 0X1
PMIC_IRQ4 = 0X0
PMIC_STATUS1 = 0X40
PMIC_STATUS2 = 0X2c
followed by a green ANDROID robot with a message "FORCED UPLOAD by KEY PRESSING"
Anyone has any idea how to fix this, pls?
I would like to have the 3-button works again.

krairach1 said:
Hi,
I got a strange problem with my I9000 after flashing ROM.
Initially, the 3-button combination for Download and Recovery works well.
But after several ROM flashings (ODIN), my SSGS can't go into Recovery mode (vol up + home + power). However, it can go into Download mode (vol dn + home + power).
When I want to go into Recovery mode, I resort to use the power button (built in feature of DARKYROM). I also try the 3-button-fixed but to no avail.
Today, I flash ROM to the stock JV1.
I try to go into Recovery mode again.
I got:
RST_STAT = 0X4
PMIC_IRQ1 = 0Xc8
PMIC_IRQ2 = 0X0
PMIC_IRQ3 = 0X1
PMIC_IRQ4 = 0X0
PMIC_STATUS1 = 0X40
PMIC_STATUS2 = 0X2c
followed by a green ANDROID robot with a message "FORCED UPLOAD by KEY PRESSING"
Anyone has any idea how to fix this, pls?
I would like to have the 3-button works again.
Click to expand...
Click to collapse
I run into this problem when I was fixing one of my phone as well. I just refresh it with ROM which has 3 tar files. one for PDA, one for PHONE, one for CSC. the problem has been sloved.
I am not expert either, and one of my phone still not yet worked. hope that works for you.

jv1 is a rough gingerbread beta with a lot of known bugs including the one you mention. You need to check out the jv1 gingerbread threads

[Q] How to fix power reset or unknown upload mode issue?

Tried to flash s1_odin_20100512.pit using ODIN and got stuck with the following:
Got the following codes with "power reset or unknown upload mode" message when trying to enter in the download mode (Vol+Home+Power combo)
RST_STAT 0X1
PMIC_IRQ1 0x0
PMIC_IRQ2 0x0
PMIC_IRQ3 0x0
PMIC_IRQ4 0x0
PMIC_STATUS1 0x0
PMIC_STATUS2 0x0
Also, get the can't mount E: Can't mount "/dev/block/mmcblk0p3"
Can this be reolved? If yes, how? Any help is appreciated...Thx

Bump....anyone?

Help...anyone?
Help...anyone?

Bump because a handset I had had the same issue.

Running in to this on my Captivate. Unable to mount error and the unknown upload mode error.
"Power reset or unknown upload mode" appears when I try to boot the phone. After the AT&T screen, it goes to black. Hold power+vol up long enough to normally trigger a reset, and this message appears.

-Power off your phone
-Pull out battery
-Open Odin
-Attach phone to pc with usb
-Hold down both volume buttons and put battery back in
-Now you should be in download mode and able to go back to stock with odin

I got the same problem and cant now get into download mode

See this video-https://youtube.com/shorts/zKDCknLNjkE?feature=share
It worked for me

Phone wont turn on .. help plz

My captivate died .. i dont know wat happened it was working one moment and then i got a blue screen (Similar to Windows Blue screen of death) so i pulled the battery n now it wont start ..
When i press the power button the screen turns on but its shows ntn like blank black screen.. cant enter recovery or download mode ..
When i press power n vol up button i get this screen with stuff written on it in orange font .
Power + Vol up gives me
RST_STAT = 0x1
PWIC_IRQ1 = 0x80
PWIC_IRQ2 = 0x0
PWIC_IRQ3 = 0x1
PWIC_IRQ4 = 0x0
PWIC_STATUS1 = 0x80
PWIC_STATUS2 = 0x0
*
ntn else works or does nything ...
Anyone .. Any clue ??
Sent from my GT-I9300 using xda app-developers app

U need a Jig to get into Download Mode.
If u r on a pc, click on my Sig link below for links on how to make a jig or where to buy one.
Sent from my SGH-I897 using xda premium